Oxymatrine inhibited cell proliferation by inducing apoptosis in human lung cancer A549 cells.

abstract：:A double-layered tube consisting of a porous inner tube and a solid outer tube was used to perfuse isotonic saline solution into blood to prevent blood cell adhesion. Polystyrene/poly(styrene-co-butadiene) (PS-SBR) porous tubes were made using a dipping method. Citrated canine blood was circulated for 30 min with the ...

journal_title：Bio-medical materials and engineering

authors： Kim SS,Park JB

更新日期：1993-07-01 00:00:00

abstract：BACKGROUND:Accelerated hydrothermal aging has long been one of the most widely accepted quality control tests for simulating low-temperature degradation (LTD) in zirconia-containing implants used in total hip arthroplasty (THA). However, it is still unclear how much consistency there is between the experimental predict...

journal_title：Bio-medical materials and engineering

authors： Tateiwa T,Takahashi Y,Pezzotti G,Shishido T,Masaoka T,Sano K,Yamamoto K

更新日期：2020-01-01 00:00:00

abstract：:Polylactic acid (PLA)/styrene-ethylene-butylene-styrene (SEBS) composites were prepared by melt blending. Differential scanning calorimetry (DSC) and wide angle X-ray diffraction (WXRD) were used to characterize PLA and PLA/SEBS composites in terms of their melting behavior and crystallization. Curves from thermal gra...

journal_title：Bio-medical materials and engineering

authors： Tsou CH,Kao BJ,Yang MC,Suen MC,Lee YH,Chen JC,Yao WH,Lin SM,Tsou CY,Huang SH,De Guzman M,Hung WS

更新日期：2015-01-01 00:00:00

abstract：:Resorbable ceramics can promote the bony integration of implants. Their rate of degradation should ideally be synchronized with bone regeneration. This study examined the effect of rapidly resorbable calcium phosphate ceramics 602020, GB14, 305020 on adherence, proliferation and morphology of human bone-derived cells ...

journal_title：Bio-medical materials and engineering

authors： Radetzki F,Wohlrab D,Zeh A,Delank KS,Mendel T,Berger G,Syrowatka F,Mayr O,Bernstein A

更新日期：2011-01-01 00:00:00

abstract：:To better analyze images with the Gaussian white noise, it is necessary to remove the noise before image processing. In this paper, we propose a self-adaptive image denoising method based on bidimensional empirical mode decomposition (BEMD). Firstly, normal probability plot confirms that 2D-IMF of Gaussian white noise...

journal_title：Bio-medical materials and engineering

authors： Guo S,Luan F,Song X,Li C

更新日期：2014-01-01 00:00:00

abstract：:A multidirectional pin-on-plate reciprocating machine was used to compare the wear performance of UHMWPE sliding against cast cobalt chrome (CoCr) plates that were either untreated or coated with Amorphous Diamond Like Carbon (ADLC). The test conditions were based on a 1/5 scale model representative of in vivo motion ...

journal_title：Bio-medical materials and engineering

authors： Jones VC,Barton DC,Auger DD,Hardaker C,Stone MH,Fisher J

更新日期：2001-01-01 00:00:00

abstract：:Sunscreens that absorb UV light without photodegradation could reduce skin cancer. Polyvinyl silsesquioxanes are known to have greater thermal and photochemical stability than organic compounds, such as those in sunscreens. This paper evaluates the UV transparency of vinyl silsesquioxanes (VS) and its hybrids with SiO...

journal_title：Bio-medical materials and engineering

authors： Wang H,Lin D,Wang D,Hu L,Huang Y,Liu L,Loy DA

更新日期：2014-01-01 00:00:00

abstract：:Fracture toughness (KIC), critical stress intensity factor, and bending strength of 3 types of commercially available dental composite resins (macrofilled, hybrid and microfilled type) were determined using three point bend specimens. Acoustic Emission (AE), which is the generation of elastic wave due to the release o...

journal_title：Bio-medical materials and engineering

authors： Kim KH,Park JH,Imai Y,Kishi T

更新日期：1991-01-01 00:00:00

abstract：:Crystalline hydroxyapatite (HA) powder was coated on titanium substrate by radio frequency (RF) magnetron sputtering. The coating was homogeneous thin film and the thickness was 1microm. Crystallinity of the HA coating was low and Ca/P ratio was high as 3.0. Particle sizes were 40 to approximately 100 nm, and the crys...

journal_title：Bio-medical materials and engineering

authors： Ozeki K,Yuhta T,Aoki H,Nishimura I,Fukui Y

更新日期：2000-01-01 00:00:00

abstract：PURPOSE:To establish a method for mouse coronary angiography in vivo using synchrotron radiation, which is essential for physiological and pathological research on coronary diseases. METHODS:1) The imaging parameters (e.g., photon energy, spatial resolution of the detector, and injection rate of contrast agent) optima...

journal_title：Bio-medical materials and engineering

authors： Xu L,Zhang A,Du G,Xie H,Chen Y

更新日期：2014-01-01 00:00:00

abstract：OBJECTIVE:To characterize the structure and to evaluate the cytotoxicity of cellulose nanowhiskers (CNW) prepared from cotton linters. METHODS:A series of CNW dispersions was prepared by hydrolyzing cotton linters with sulfuric acid. The structure of CNW was characterized by scanning electron microscopy (SEM), transmi...

journal_title：Bio-medical materials and engineering

authors： Ni H,Zeng S,Wu J,Cheng X,Luo T,Wang W,Zeng W,Chen Y

更新日期：2012-01-01 00:00:00

abstract：:The frequent occurrence of breast cancer and its serious consequences have attracted worldwide attention in recent years. Problems such as low rate of accuracy and poor self-adaptability still exist in traditional diagnosis. In order to solve these problems, an AdaBoost-SVM classification algorithm, combined with the ...

journal_title：Bio-medical materials and engineering

authors： Li P,Bi T,Huang J,Li S

更新日期：2014-01-01 00:00:00

abstract：:PVA-hydrogel has excellent biocompatibility as well as preferable tribological characteristics as an artificial articular cartilage. One of the most difficult problems is the attachment of PVA-hydrogel to the underlying bone (or metal substrate). In the present study, the micro-mechanical attachment between the PVA-hy...

journal_title：Bio-medical materials and engineering

authors： Gu ZQ,Xiao JM,Lou SQ

更新日期：1999-01-01 00:00:00

abstract：:Reoperation of aldehyde tanned bioprotheses due to calcific degeneration remains their major drawback. Based on experiments studying mechanisms and factors that influence the time phase, extent and progression of calcification and evaluating the efficiency of anticalcification treatments and the effects of surface see...

journal_title：Bio-medical materials and engineering

authors： Dahm M,Rühe J,Berchthold B,Prüfer D,Prucker O,Chang BJ,Wallrath A,Oelert H

更新日期：2004-01-01 00:00:00

abstract：:We previously reported a simple method for the preparation of size-controlled spherical silver nanoparticles (Ag NPs) generated by autoclaving a mixture of silver-containing glass powder and glucose. The particle size is regulated by the glucose concentration, with concentrations of 0.25, 1.0 and 4.0 wt% glucose provi...

journal_title：Bio-medical materials and engineering

authors： Nguyen VQ,Ishihara M,Mori Y,Nakamura S,Kishimoto S,Fujita M,Hattori H,Kanatani Y,Ono T,Miyahira Y,Matsui T

更新日期：2013-01-01 00:00:00

abstract：:The effect of carbonate in reducing the crystal size of precipitated hydroxyapatite by approximately an order of magnitude has not been used previously in the preparation of gel monoliths for the fabrication of carbonate hydroxyapatite ceramics. The aim of this study was to devise a method whereby gel monoliths of car...

journal_title：Bio-medical materials and engineering

authors： Barralet JE,Best SM,Bonfield W

更新日期：1996-01-01 00:00:00

abstract：:The purpose of this investigation was to assess mechanical properties of Superelastic Retraction Coil Springs for orthodontic use. To reach a goal, a test frame, comprising measuring force transducers was developed. To perform metallographic analyses of the nickel-titanium wire the samples of Superelastic Retraction C...

journal_title：Bio-medical materials and engineering

authors： Rozman J,Mrvar P,Drevenšek M,Pečlin P

更新日期：2010-01-01 00:00:00

abstract：:The interaction between implant materials and bone cells or oral epithelial (OE) cells contributes to the clinical success of dental implants. The functional activity of cells in contact with an implant is determined by its surface properties. Before cells attach, extracellular matrix (ECM) in the serum deposits on th...

journal_title：Bio-medical materials and engineering

authors： Goto T,Yoshinari M,Kobayashi S,Tanaka T

更新日期：2004-01-01 00:00:00

abstract：INTRODUCTION:Repairing contour defects is a challenge in plastic surgery. Different filling materials have been used with inadequate results and complications. The autologous fat transfer is the standard technique at the moment, but adipose tissue reserves are limited. The aim of our study was to compare in vivo on an ...

journal_title：Bio-medical materials and engineering

authors： Mojallal A,Lequeux C,Auxenfans C,Braye F,Damour O

更新日期：2008-01-01 00:00:00

abstract：:Polycrystalline diamond (PCD) exhibits excellent abrasive characteristics and is commonly used as loose grains for precision machining of hard ceramics and other materials that are difficult to grind and polish. In the present study, we investigated using bonded PCD for polishing dental porcelain, for which a lustrous...

journal_title：Bio-medical materials and engineering

authors： Nakamura Y,Sato H,Ohtsuka M,Hojo S

更新日期：2010-01-01 00:00:00

abstract：:The in vivo and in vitro drug release profiles from a self-setting bioactive CaO-SiO2-P2O5 glass bone cement containing indomethacin as a model drug were investigated. The cement containing 2% and 5% indomethacin (IMC) powder hardened within 5 min after mixing with ammonium phosphate buffer. After setting, in vitro dr...

journal_title：Bio-medical materials and engineering

authors： Otsuka M,Nakahigashi Y,Matsuda Y,Kokubo T,Yoshihara S,Fujita H,Nakamura T

更新日期：1997-01-01 00:00:00

abstract：:Mesenchymal stem cells (MSCs) are a common tool in regenerative medicine. The nanoscale extracellular vesicles (nEVs) secreted by these cells were recently brought up to light thanks to their therapeutic potential. In this study, we assessed the in vitro behaviour of human umbilical vein endothelial cells (HUVECs) exp...

journal_title：Bio-medical materials and engineering

authors： Dostert G,Willemin AS,Jouan-Hureaux V,Louis H,Hupont S,Gillet P,Menu P,Decot V,Moby V,Velot É

更新日期：2017-01-01 00:00:00

abstract：:Hydroxyapatite has been rubbed against ultra-high-molecular-weight-polyethylene (UHMWPE) under calcium-containg aqueous solutions. Further, hardness tests were carried out in air and in calcium-containing solutions whose pH ranged from pH 5 to pH 9. Hardness was found to vary with pH with a peak at around pH 7, i.e. -...

journal_title：Bio-medical materials and engineering

authors： Mazeau G,Czernuszka JT

更新日期：2001-01-01 00:00:00

abstract：:A driver's response to a front-coming vehicle collision consists of braking reaction time and braking behavior. The purpose was to investigate drivers' responses at different speeds, relative distances, and particularly the behavior on the accelerator at the collision moment. Twelve young men participated in driving s...

journal_title：Bio-medical materials and engineering

authors： Gao Z,Li C,Hu H,Zhao H,Chen C,Yu H

更新日期：2015-01-01 00:00:00

abstract：:The finite element (FE) method has been widely used to investigate the mechanism of traumatic brain injuries (TBIs), because it is technically difficult to quantify the responses of the brain tissues to the impact in experiments. One of technical challenges to build a FE model of a human head is the modeling of the ce...

journal_title：Bio-medical materials and engineering

authors： Wu JZ,Pan CS,Wimer BM,Rosen CL

更新日期：2017-01-01 00:00:00

abstract：:Experimental results on the platelet adhesion, and CHO cell adhesion and growth onto nonionic surfactant which is composed of a long alkyl chain (n = 12-18) as the hydrophobic part, and a polyethyleneoxide (PEO) segment (n = 10-23) as the hydrophilic part coated and air-plasma treated PSf surfaces are presented in ter...

journal_title：Bio-medical materials and engineering

authors： Khang G,Jeong BJ,Lee HB,Park JB

更新日期：1995-01-01 00:00:00

abstract：:Numerous constitutive models describing the mechanical properties of tendons have been proposed during the past few decades. However, few were widely used owing to the lack of implementation in the general finite element (FE) software, and very few systematic studies have been done on selecting the most appropriate pa...

journal_title：Bio-medical materials and engineering

authors： Tang CY,Ng GY,Wang ZW,Tsui CP,Zhang G

更新日期：2011-01-01 00:00:00

abstract：:The balance between extracellular inorganic phosphate (ePi) and extracellular inorganic pyrophosphate (ePPi) is controlled by four membrane proteins: the transporters ANK (exporting PPi outside the cells) and PiT-1 (importing ePi into the cells), and the enzymes PC-1 (generating ePPi from nucleotides) and Tissue Non-s...

journal_title：Bio-medical materials and engineering

authors： Hamade T,Bianchi A,Sebillaud S,Netter P,Jouzeau JY,Cailotto F

更新日期：2010-01-01 00:00:00

abstract：OBJECTIVES:to assess reliability and reproducibility of quantitative MRI (7 T) in assessing rat femoro-tibial cartilage volume. METHODS:5 healthy rat knees were scanned in vivo using a 7 T experimental imager. Sagittal high resolution 3D Gradient Echo with fat suppression sequences were performed with a dedicated home...

journal_title：Bio-medical materials and engineering

authors： Goebel JC,Bolbos R,Pinzano A,Schaeffer M,Rengle A,Galois L,Etienne S,Netter P,Loeuille D,Beuf O,Gillet P

更新日期：2008-01-01 00:00:00

abstract：:Gabexate mesilate is a non-peptide protease inhibitor, developed in Japan, which is used in the treatment of acute pancreatitis and disseminated intravascular coagulation. This compound is readily hydrolyzed as it has ester bonds in its structure. It is now out of patent in Japan and there are many generic versions on...

journal_title：Bio-medical materials and engineering

authors： Sakurai M,Abe H,Okamura N,Inoue Y,Akiyoshi T,Matsuyama K,Uchida T,Otsuka M

更新日期：2010-01-01 00:00:00