Experimal study of young male drivers' responses to vehicle collision using EMG of lower extremity.

abstract：:The interactions between carbon nanotubes and important biomolecules, above all collagen molecules, have not been studied in detail. This situation is partly due to the fact that CNT are solid entities, while most of the biomolecules can be prepared in solution. We used turbidity as a means of evaluating the interacti...

journal_title：Bio-medical materials and engineering

authors： Kuboki Y,Terada M,Kitagawa Y,Abe S,Uo M,Watari F

更新日期：2009-01-01 00:00:00

abstract：:Biocompatible metals have been suggested as revolutionary biomaterials for bone-grafting therapies. Although metals and their alloys are widely and successfully used in producing biomedical implants due to their good mechanical properties and corrosion resistance, they have a lack in bioactivity. Therefore coating of ...

journal_title：Bio-medical materials and engineering

authors： Saleh MM,Touny AH,Al-Omair MA,Saleh MM

更新日期：2016-05-12 00:00:00

abstract：PURPOSE:To establish a method for mouse coronary angiography in vivo using synchrotron radiation, which is essential for physiological and pathological research on coronary diseases. METHODS:1) The imaging parameters (e.g., photon energy, spatial resolution of the detector, and injection rate of contrast agent) optima...

journal_title：Bio-medical materials and engineering

authors： Xu L,Zhang A,Du G,Xie H,Chen Y

更新日期：2014-01-01 00:00:00

abstract：:In order to investigate the significance of hydroxyapatite based microporous composite (HA/mica composite) surfaces and a macroporous synthetic hydroxyapatite, rat marrow cell culture, which shows osteogenic differentiation, was carried out on six different culture substrata (two control culture dishes, two identical ...

journal_title：Bio-medical materials and engineering

authors： Nordström E,Ohgushi H,Yoshikawa T,Yokobori AT Jr,Yokobori T

更新日期：1999-01-01 00:00:00

abstract：:Fifty two ceramic femoral heads have been investigated after implantation. All heads had articulated against ultra high molecular weight polyethylene (UHMWPE) cups. Examination of the heads shows changes in sphericity and surface roughness due to the wear. The behaviour of these retrieved heads after clinical use conf...

journal_title：Bio-medical materials and engineering

authors： Fernández-Fairén M,Sala P,Gil FJ

更新日期：2006-01-01 00:00:00

abstract：:MicroRNAs (miRNAs) are a group of endogenous noncoding small RNAs characterized by high conservation; furthermore, various studies have shown the capability of miRNAs to impact diseases. For example, a study shows that cell-free miRNAs are stable in bodily fluids, which gives circulating miRNAs the ability to be poten...

journal_title：Bio-medical materials and engineering

authors： Xu L,Qi X,Duan S,Xie Y,Ren X,Chen G,Yang X,Han L,Dong Q

更新日期：2014-01-01 00:00:00

abstract：:In this study, biocompatibility of 17-4 PH stainless steel foam for biomedical implant applications was investigated. 17-4 PH stainless steel foams having porosities in the range of 40-82% with an average pore size of around 600 μm were produced by space holder-sintering technique. Sintered foams were precipitation ha...

journal_title：Bio-medical materials and engineering

authors： Mutlu I,Oktay E

更新日期：2011-01-01 00:00:00

abstract：:This study aimed to determine the optimal starting material for the development of an acellular osteochondral graft. Osteochondral tissues from three different species were characterised; pig (6 months), cow (18 months) and two ages of sheep (8-12 months and >4 year old). Tissues from the acetabulum and femoral head o...

journal_title：Bio-medical materials and engineering

authors： Fermor HL,McLure SW,Taylor SD,Russell SL,Williams S,Fisher J,Ingham E

更新日期：2015-01-01 00:00:00

abstract：:To evaluate the deterioration in the superelasticity of Ti-coated NiTi orthodontic wires, titanium was coated onto wires to form a 1-microm thick film using radio frequency magnetron sputtering. In superelasticity cycle tests, the sigma5.0 value (the stress at 5.0% strain) of a Ti-coated wire was lower than that of a ...

journal_title：Bio-medical materials and engineering

authors： Ozeki K,Yuhta T,Aoki H,Asaoka T,Daisaku T,Fukui Y

更新日期：2003-01-01 00:00:00

abstract：:The selection of stent and balloon type is decisive in the stenting process. In the treatment of an eccentric plaque obstruction, a symmetric expansion from stent dilatation generates nonuniform stress distribution, which may aggravate fibrous cap prone to rupture. This paper developed a new stent design to treat ecce...

journal_title：Bio-medical materials and engineering

authors： Syaifudin A,Takeda R,Sasaki K

更新日期：2018-01-01 00:00:00

abstract：:Intensity-Modulated Radiation Therapy (IMRT) mathematically forms a large-scale optimization problem. The development of an IMRT plan is computationally expensive resulting in time-consuming, inefficient, and difficult to develop high-quality IMRT plans. By combining prior knowledge with proposed novel measures derive...

journal_title：Bio-medical materials and engineering

authors： Zhou Z,Chen Y,Yu Z,Wang D,Zhao C,Xu J,Song W,Li B,Shen J,Zhu X

更新日期：2014-01-01 00:00:00

abstract：:Three patterned systems aiming at the control of mammalian cell behavior are presented. The determinant feature common to these systems is the spatial distribution of extracellular matrix (ECM) proteins (mainly collagen) on polymer substrates. This distribution differs from one system to another with respect to the sc...

journal_title：Bio-medical materials and engineering

authors： Dupont-Gillain CC,Alaerts JA,Dewez JL,Rouxhet PG

更新日期：2004-01-01 00:00:00

abstract：:Hydroxyapatite was coated with 1 microm thickness on titanium columns of a length of 10 mm, an outer diameter of 4.0 mm by radio frequency magnetron sputtering. The hydroxyapatite coating titanium columns were implanted in the diaphysis of femora of 3 adult dogs, and push-out test was carried out after 2, 4 and 12 wee...

journal_title：Bio-medical materials and engineering

authors： Ozeki K,Yuhta T,Aoki H,Nishimura I,Fukui Y

更新日期：2001-01-01 00:00:00

abstract：:The method of formation of bioactive calcium-phosphate coating on medical titanium alloy Ti-6Al-4V (3.5-5.3% V; 5.3-6.8% Al; balance -Ti) by plasma electrolytic oxidation (PEO) has been developed. Evaluation of osteogenerating properties of the coating at fractures of the shaft of the femur on Wistar line laboratory r...

journal_title：Bio-medical materials and engineering

authors： Gnedenkov SV,Sinebryukhov SL,Puz AV,Egorkin VS,Kostiv RE

更新日期：2016-01-01 00:00:00

abstract：:The biological, biochemical, mechanical, and structural properties of artificial scaffolds for tissue engineering are known to be of great importance. Therefore, in this study a hydrogel derived scaffold with biomechanical and structural properties similar to native articular cartilage was synthesized. The gelatine-ba...

journal_title：Bio-medical materials and engineering

authors： Zehbe R,Libera J,Gross U,Schubert H

更新日期：2005-01-01 00:00:00

abstract：:A crucial role during the implementation of volume visualization is to identify the optimal transfer function, since the vital information and structure can be highlighted and revealed. The boundary of the volume is shared by respective portion of the two materials formed out of it, which causes undesirable thickening...

journal_title：Bio-medical materials and engineering

authors： Yang F,Zhang L,Lu W,Zuo W,Wang K,Zhang H,Li Y

更新日期：2014-01-01 00:00:00

abstract：:A double-layered tube consisting of a porous inner tube and a solid outer tube was used to perfuse isotonic saline solution into blood to prevent blood cell adhesion. Polystyrene/poly(styrene-co-butadiene) (PS-SBR) porous tubes were made using a dipping method. Citrated canine blood was circulated for 30 min with the ...

journal_title：Bio-medical materials and engineering

authors： Kim SS,Park JB

更新日期：1993-07-01 00:00:00

abstract：:In this investigation, ultrasonic parameters of kidney stones are measured, in vitro, using a double probe ultrasonic-through-transmission technique. Due to the complex chemical structure of these stones, a large variation in the values of the ultrasonic parameters is found. A correlation between ultrasonic properties...

journal_title：Bio-medical materials and engineering

authors： Singh VR,Dhawan JB

更新日期：1992-07-01 00:00:00

abstract：:Bioelectrical impedance phase angle has been recommended as a tool to assess nutrition state, but there are no measuring devices have been specially designed for hospital residents. In this study, a system was established for the measurement of bioelectrical impedance phase angle. The electrical composition, calculati...

journal_title：Bio-medical materials and engineering

authors： Zhang G,Huo X,Wu C,Zhang C,Duan Z

更新日期：2014-01-01 00:00:00

abstract：BACKGROUND:In order to manufacture pharmaceutical products, real-time monitoring in the manufacturing process is necessary, but large equipment cost is required to achieve it. OBJECTIVE:The aim of this research is to use ultra-violet-visible spectroscopy along with chemometrics procedure to simultaneously carry out qu...

journal_title：Bio-medical materials and engineering

authors： Peerapattana J,Hattori Y,Otsuka M

更新日期：2019-01-01 00:00:00

abstract：:Skilled behavior is difficult or impossible to articulate explicitly by the performers. Likewise biomechanical models of skilled motor actions are often limited by the lack of knowledge of the underlying mechanisms. A 'behavioral cloning' technique is described, based on a trained artificial neural network (ANN), that...

journal_title：Bio-medical materials and engineering

authors： Andrews BJ,Davoodi R,Kamnik R,Bajd T

更新日期：1998-01-01 00:00:00

abstract：:Surface roughness has been considered as an important influencing factor for cell response. The aim of this study was to find out whether MC3T3-E1 cells, a mouse osteoblast-like cell line, can sense the amplitudes of surface topography of titanium alloy (Ti6Al4V), and if surface-dependent cell morphology would be pres...

journal_title：Bio-medical materials and engineering

authors： Wu C,Chen M,Zheng T,Yang X

更新日期：2015-01-01 00:00:00

abstract：BACKGROUND:The periodontal ligament (PDL), which maintains homeostasis in the periodontium, is a group of specialized connective tissue fibers attached to both the cementum and alveolar bone. Regeneration of periodontium with PDL cells has been investigated, and the chemical and molecular structures of scaffolds contro...

journal_title：Bio-medical materials and engineering

authors： Fujita K,Nozaki K,Horiuchi N,Yamashita K,Miura H,Nagai A

更新日期：2018-01-01 00:00:00

abstract：BACKGROUND:Adhesive resin composite, which is used to bond orthodontic bracket to tooth surface is exposed to the influence of wear by tooth brushing and wear may influence loosening of the bracket. OBJECTIVE:The aim of this study was to evaluate in vitro the effect of tooth brushing on the adhesion strength of orthod...

journal_title：Bio-medical materials and engineering

authors： Durgesh BH,Alhijji S,Hashem MI,Al Kheraif AA,Durgesh P,Elsharawy M,Vallittu PK

更新日期：2016-09-28 00:00:00

abstract：:In this study, design optimization of a tooth implant-supported fixed prosthesis was investigated theoretically. A three-dimensional finite element analysis was utilized to simulate the stress distribution and deformation, with an emphasis on the material selection for various parts of the prosthesis. This mandibular ...

journal_title：Bio-medical materials and engineering

authors： Dargahi J,Najarian S,Talebi M

更新日期：2005-01-01 00:00:00

abstract：:The current density of Ti-56mass%Ni (Ti-50at.%) alloy after abrasion in simulated bioliquids was measured using a potentiostat to estimate the amount of metallic ions released from the alloy during repassivation and maturation. The current density in saline, saline with and without N2 bubbling, and Hanks' solutions wi...

journal_title：Bio-medical materials and engineering

authors： Watarai M,Hanawa T,Moriyama K,Asaoka K

更新日期：1999-01-01 00:00:00

abstract：:Two surface analytical spectroscopic techniques (namely, angular-dependent X-ray photoelectron spectroscopy and static secondary ion mass spectrometry) were used to characterize the nature and composition of the surface and near-surface layers formed on three biomedical polymers (namely, low-density polyethylene, expa...

journal_title：Bio-medical materials and engineering

authors： Lewis G,Newman J,Katz W

更新日期：1995-01-01 00:00:00

abstract：:In this work, we present an evolutive trabecular model for bone remodeling based on a boundary detection algorithm accounting for both biology and applied mechanical forces, known to be an important factor in bone evolution. A finite element (FE) numerical model using the Abaqus/Standard® software was used with a UMAT...

journal_title：Bio-medical materials and engineering

authors： Spingarn C,Wagner D,Rémond Y,George D

更新日期：2017-01-01 00:00:00

abstract：BACKGROUND:Gait analysis, such as portable gait rhythmogram (PGR), provides objective information that helps in the quantitative evaluation of human locomotion. OBJECTIVE:The purpose of this study was to assess the reliability of PGR in post-stroke patients. METHODS:Two raters (A and B) examined 48 post-stroke patien...

journal_title：Bio-medical materials and engineering

authors： Miyata R,Matsumoto S,Miura S,Kawamura K,Uema T,Miyara K,Niibo A,Hoei T,Ogura T,Shimodozono M

更新日期：2020-01-01 00:00:00

abstract：:A layer of L-glycine-molecule-imprinted polyaniline (LMIP-PANI) polymer film has been modified on a carbon fiber electrode for the determination of L-glycine standard samples and L-glycine in cerebrospinal fluid of wistar mice. It has been found that a linear relationship exists between current and concentration for t...

journal_title：Bio-medical materials and engineering

authors： Zeng H,Wang D,Yu J

更新日期：2014-01-01 00:00:00