In vivo study of osteogenerating properties of calcium-phosphate coating on titanium alloy Ti-6Al-4V.

abstract：:DNA-binding proteins are involved and play a crucial role in a lot of important biological processes. Hence, the identification of the DNA-binding proteins is a challenging and significant problem. In order to reveal the intrinsic information correlated to DNA-binding, nine classes of candidate features based on diffe...

journal_title：Bio-medical materials and engineering

authors： Guan C,Niu X,Shi F,Yang K,Li N

更新日期：2015-01-01 00:00:00

abstract：:Modeling of thermal-induced mechanical behaviors of soft tissues is of great importance for thermal ablation. This paper presents a method by integrating the heating process with thermal-induced mechanical deformations of soft tissues for simulation and analysis of the thermal ablation process. This method combines bi...

journal_title：Bio-medical materials and engineering

authors： Li X,Zhong Y,Jazar R,Subic A

更新日期：2014-01-01 00:00:00

abstract：:Polylactic acid (PLA)/styrene-ethylene-butylene-styrene (SEBS) composites were prepared by melt blending. Differential scanning calorimetry (DSC) and wide angle X-ray diffraction (WXRD) were used to characterize PLA and PLA/SEBS composites in terms of their melting behavior and crystallization. Curves from thermal gra...

journal_title：Bio-medical materials and engineering

authors： Tsou CH,Kao BJ,Yang MC,Suen MC,Lee YH,Chen JC,Yao WH,Lin SM,Tsou CY,Huang SH,De Guzman M,Hung WS

更新日期：2015-01-01 00:00:00

abstract：:A surface plasmon resonance (SPR)-based biosensor was developed for specific detection of nine common respiratory virus, including influenza A and influenza B, H1N1, respiratory syncytial virus (RSV), parainfluenza virus 1-3 (PIV1, 2, 3), adenovirus, and severe acute respiratory syndrome coronavirus (SARS). The SPR bi...

journal_title：Bio-medical materials and engineering

authors： Shi L,Sun Q,He J,Xu H,Liu C,Zhao C,Xu Y,Wu C,Xiang J,Gu D,Long J,Lan H

更新日期：2015-01-01 00:00:00

abstract：:Some computer applications for cell characterization in medicine and biology, such as analysis of surface structure of cell wall-deficient EVC (El Tor Vibrio of Cholera), operate with cell samples taken from very small areas of interest. In order to perform texture characterization in such an application, only a few t...

journal_title：Bio-medical materials and engineering

authors： Li S,Hu K,Cai N,Su W,Xiong H,Lou Z,Lin T,Hu Y

更新日期：2001-01-01 00:00:00

abstract：:Microarray data has small samples and high dimension, and it contains a significant amount of irrelevant and redundant genes. This paper proposes a hybrid ensemble method based on double disturbance to improve classification performance. Firstly, original genes are ranked through reliefF algorithm and part of the gene...

journal_title：Bio-medical materials and engineering

authors： Chen T,Xue H,Hong Z,Cui M,Zhao H

更新日期：2015-01-01 00:00:00

abstract：:Since adhesive technology was introduced into dental field, metal-based restoration has been gradually replaced by metal-free restoration. Using the adhesive technology, minimum invasive technique has been possible in daily clinical practice as well as esthetic tooth-colored restorations have become very popular all o...

journal_title：Bio-medical materials and engineering

authors： Nagano F,Selimovic D,Noda M,Ikeda T,Tanaka T,Miyamoto Y,Koshiro K,Sano H

更新日期：2009-01-01 00:00:00

abstract：:Few studies have stressed on the sensitivity of stress distribution in different mechanical properties of the articular cartilage and subchondral bone. The purpose of this study was to establish parametric variations of mechanical factors individually and examine how these biomechanical effects influenced the cartilag...

journal_title：Bio-medical materials and engineering

authors： Wang Y,Wei HW,Yu TC,Cheng CK

更新日期：2007-01-01 00:00:00

abstract：:Crystalline hydroxyapatite (HA) powder was coated on titanium substrate by radio frequency (RF) magnetron sputtering. The coating was homogeneous thin film and the thickness was 1microm. Crystallinity of the HA coating was low and Ca/P ratio was high as 3.0. Particle sizes were 40 to approximately 100 nm, and the crys...

journal_title：Bio-medical materials and engineering

authors： Ozeki K,Yuhta T,Aoki H,Nishimura I,Fukui Y

更新日期：2000-01-01 00:00:00

abstract：:Sepsis is a systemic inflammatory response syndrome with high mortality, which results from severe infection and can lead to secondary organ dysfunction. It is one of the most common cause of death in intensive care unit. Clinical reports have shown that sepsis was often accompanied by thyroid dysfunction, which is ca...

journal_title：Bio-medical materials and engineering

authors： Luo B,Yu Z,Li Y

更新日期：2017-01-01 00:00:00

abstract：:Mesenchymal stem cells (MSCs) are a common tool in regenerative medicine. The nanoscale extracellular vesicles (nEVs) secreted by these cells were recently brought up to light thanks to their therapeutic potential. In this study, we assessed the in vitro behaviour of human umbilical vein endothelial cells (HUVECs) exp...

journal_title：Bio-medical materials and engineering

authors： Dostert G,Willemin AS,Jouan-Hureaux V,Louis H,Hupont S,Gillet P,Menu P,Decot V,Moby V,Velot É

更新日期：2017-01-01 00:00:00

abstract：:An acid-base resistant zone (ABRZ) has been shown to be created under a hybrid layer in a self-etching adhesive system at the adhesive/dentin interface. The purpose of this study was to assess the nanostructure of the ABRZ by applying all-in-one adhesive systems. Human premolar dentin was treated with one of two all-i...

journal_title：Bio-medical materials and engineering

authors： Nikaido T,Weerasinghe DD,Waidyasekera K,Inoue G,Foxton RM,Tagami J

更新日期：2009-01-01 00:00:00

abstract：:An alternative non-vascular extracellular material was obtained by decellularisation of porcine urinary bladder and examined for its potential as scaffold for vascular tissue engineering. Analysis using Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM) and Laser Scanning Microscopy (LSCM) showed a poro...

journal_title：Bio-medical materials and engineering

authors： Piterina AV,Callanan A,Davis L,Meaney C,Walsh M,McGloughlin TM

更新日期：2009-01-01 00:00:00

abstract：BACKGROUND:The most common cause of coronary artery disease (CAD) is vascular damage with the cholesterol built-up and other materials on the inner arterial wall, known as atherosclerosis. OBJECTIVE:This paper aims to investigate the effect of stenosis on the hemodynamics in the four suspected coronary artery disease ...

journal_title：Bio-medical materials and engineering

authors： Kamangar S,Salman Ahmed NJ,Badruddin IA,Al-Rawahi N,Husain A,Govindaraju K,Yunus Khan TM

更新日期：2019-01-01 00:00:00

abstract：UNLABELLED:It is suggested that nanophase hydroxyapatite (nHAP) might have advantages over conventional hydroxyapatite (cHAP) as a biomaterial for bone regeneration. To be a satisfactory candidate for bone tissue engineering, it is important to support the growth and differentiation of bone marrow-derived mesenchymal s...

journal_title：Bio-medical materials and engineering

authors： Zhou GS,Su ZY,Cai YR,Liu YK,Dai LC,Tang RK,Zhang M

更新日期：2007-01-01 00:00:00

abstract：:In this study, design optimization of a tooth implant-supported fixed prosthesis was investigated theoretically. A three-dimensional finite element analysis was utilized to simulate the stress distribution and deformation, with an emphasis on the material selection for various parts of the prosthesis. This mandibular ...

journal_title：Bio-medical materials and engineering

authors： Dargahi J,Najarian S,Talebi M

更新日期：2005-01-01 00:00:00

abstract：:The present review surveys studies on physical-chemical properties and biological response of living tissues to NiTi (Nitinol) carried out recently, aiming at an understanding of the place of this material among the implant alloys in use. Advantages of shape memory and superelasticity are analyzed in respect to functi...

journal_title：Bio-medical materials and engineering

authors： Shabalovskaya SA

更新日期：2002-01-01 00:00:00

abstract：:The current density of Ti-56mass%Ni (Ti-50at.%) alloy after abrasion in simulated bioliquids was measured using a potentiostat to estimate the amount of metallic ions released from the alloy during repassivation and maturation. The current density in saline, saline with and without N2 bubbling, and Hanks' solutions wi...

journal_title：Bio-medical materials and engineering

authors： Watarai M,Hanawa T,Moriyama K,Asaoka K

更新日期：1999-01-01 00:00:00

abstract：:Food systems are complex and inhomogeneous in nature. Ultrasonic propagation velocity in the food systems, in this case processed milk cream and vegetable oils, is studied. Ultrasonic properties of the food systems are similar to those of complex biological tissues. The presence of vegetable oil as an adulterant in th...

journal_title：Bio-medical materials and engineering

authors： Singh VR,Kumar A

更新日期：1992-04-01 00:00:00

abstract：:Significant progress has been achieved in the field of pH-sensitive drug delivery system in recent years. For layer-by-layer self-assembly nanocarriers, various pH values can induce the change of permeability and structural stability of the outer polyelectrolyte multi-layers, resulting in the release of the loaded dru...

journal_title：Bio-medical materials and engineering

authors： Zhang HY,Sun YF,Sun YL,Zhou M

更新日期：2014-01-01 00:00:00

abstract：:The ion selective transport plays an important role in the function of cell membranes, and promotes the application of artificial permeable membranes. This phenomenon has been studied in case for different diameters and functional groups of nanopores. In this work, we focus on the effect of anions on cation selectivit...

journal_title：Bio-medical materials and engineering

authors： Tang D,Kim D

更新日期：2014-01-01 00:00:00

abstract：:Polycrystalline diamond (PCD) exhibits excellent abrasive characteristics and is commonly used as loose grains for precision machining of hard ceramics and other materials that are difficult to grind and polish. In the present study, we investigated using bonded PCD for polishing dental porcelain, for which a lustrous...

journal_title：Bio-medical materials and engineering

authors： Nakamura Y,Sato H,Ohtsuka M,Hojo S

更新日期：2010-01-01 00:00:00

abstract：OBJECTIVE:Understanding the biomechanical properties of hernia meshes is essential in facilitating their selection. The aim of this study was to evaluate the mechanical compatibility of hernia meshes and human abdominal fascia and assess their applicability in hernia repair. METHODS:Uniaxial tensile tests were perform...

journal_title：Bio-medical materials and engineering

authors： Doneva M,Pashkouleva D

更新日期：2018-01-01 00:00:00

abstract：BACKGROUND:Introduction of a new generation of artificial ligaments for ACL reconstruction, the Ligament Augmentation and Reconstruction System (LARS), gives promising clinical results [1]. The current literature supports the use of LARS from short to medium term. To go even further to improve the biocompatibility of t...

journal_title：Bio-medical materials and engineering

authors： Lessim S,Migonney V,Thoreux P,Lutomski D,Changotade S

更新日期：2013-01-01 00:00:00

abstract：BACKGROUND:Patients use mouthwashes in addition to mechanical cleaning during orthodontic treatment. The effects of mouthwashes on the archwires have not been examined yet. OBJECTIVE:To compare the corrosion resistance of four different arch wires and corrosion effects of different mouthwashes to formulate a biocompat...

journal_title：Bio-medical materials and engineering

authors： Nalbantgil D,Ulkur F,Kardas G,Culha M

更新日期：2016-11-25 00:00:00

abstract：:The debris generated by the progressive wear of total joint replacement (TJR) devices is considered a primary cause of osteolysis, bone resorption, and premature failure of artificial hips and knees. The vast majority of this debris originates from the UHMWPE articulating surfaces caused by tribological interaction wi...

journal_title：Bio-medical materials and engineering

authors： Davidson JA,Poggie RA,Mishra AK

更新日期：1994-01-01 00:00:00

abstract：:A potassium-doped synthetic apatite was prepared by soaking hydroxyapatite in potassium carbonate and potassium chloride solutions. The hydroxyapatite was prepared by firing slip cast ceramic bodies in vacuum at 1100 degrees C. The conical ceramic samples and a crushed material of this were soaked in carbonate and chl...

journal_title：Bio-medical materials and engineering

authors： Nordström EG,Karlsson KH

更新日期：1992-01-01 00:00:00

abstract：:In a previous work by the author [H.S. Hedia and M. Nemat-Alla, Design optimization of functionally graded dental implant, submitted to be published in the J. Bio-Medical Materials and Engineering], a functionally graded material dental implant was designed without cansellous bone in the model. In this investigation t...

journal_title：Bio-medical materials and engineering

authors： Hedia HS

更新日期：2005-01-01 00:00:00

abstract：:Stroke is a major cause of death and disability throughout the world. Subtotal occlusion of the carotid artery is an important risk factor for stroke. Carotid artery stenting (CAS) is increasingly being used for treatment of carotid artery stenosis. There are many reports on treating carotid artery stenosis by CAS; ho...

journal_title：Bio-medical materials and engineering

authors： Zhang C,Wang Z,Zheng H,Qiu Y,He X,Yang H,Liu W

更新日期：2012-01-01 00:00:00

abstract：:A number of materials have been considered as sources of grafts to repair bone defects. Here, we examined the possibility of creating in situ-forming gels from sodium carboxymethylcellulose (CMC) and poly(ethyleneimine) (PEI) for use as an in vivo carrier of demineralized bone matrix (DBM). The interaction between ani...

journal_title：Bio-medical materials and engineering

authors： Kim KS,Kang YM,Lee JY,Kim ES,Kim CH,Min BH,Lee HB,Kim JH,Kim MS

更新日期：2009-01-01 00:00:00