Abstract:
PURPOSE:To establish a method for mouse coronary angiography in vivo using synchrotron radiation, which is essential for physiological and pathological research on coronary diseases. METHODS:1) The imaging parameters (e.g., photon energy, spatial resolution of the detector, and injection rate of contrast agent) optimal for the quality of acquired images in a simulation were determined. 2) Through animal experiments, the effectiveness of these optimal parameters and the repeatability of in vivo coronary angiography were verified. 3) An algorithm for background subtraction and contrast enhancement was designed and employed to compensate for the effects of interference and the effective information extracted used for diagnosing coronary disease. RESULTS AND CONCLUSIONS:An optimal set of the imaging parameters was finally determined: photon energy of 33-34 keV, detector's spatial resolution of 30 μm or higher, image capture rate of 20 f/s or more, concentration of lopamidol solution of 75% as contrast agent and a pulse injection of contrast agent at a high rate.
journal_name
Biomed Mater Engjournal_title
Bio-medical materials and engineeringauthors
Xu L,Zhang A,Du G,Xie H,Chen Ydoi
10.3233/BME-130937subject
Has Abstractpub_date
2014-01-01 00:00:00pages
1341-9issue
1eissn
0959-2989issn
1878-3619pii
D260573143313823journal_volume
24pub_type
杂志文章abstract::This study aimed to determine the optimal starting material for the development of an acellular osteochondral graft. Osteochondral tissues from three different species were characterised; pig (6 months), cow (18 months) and two ages of sheep (8-12 months and >4 year old). Tissues from the acetabulum and femoral head o...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151533
更新日期:2015-01-01 00:00:00
abstract::Using a wet method, we have synthesized octacalcium phosphate carbonate, in which HPO42- in octacalcium phosphate is replaced with CO32-. The physical, crystal, and chemical properties of this new material were compared to octacalcium phosphate, Ca-deficient hydroxyapatite, and Ca-deficient carbonate apatite using X-r...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-171651
更新日期:2017-01-01 00:00:00
abstract::The present review surveys studies on physical-chemical properties and biological response of living tissues to NiTi (Nitinol) carried out recently, aiming at an understanding of the place of this material among the implant alloys in use. Advantages of shape memory and superelasticity are analyzed in respect to functi...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章,评审
doi:
更新日期:2002-01-01 00:00:00
abstract::Milkvetch root as a medicine has been used for more over 2000 years in China, can strengthen immune function, protect liver, promote urination, resist aging and stress, reduce blood pressure and extensively resist bacterium. This study explored the effects of milkvetch root on the immune function of patients with a de...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章,随机对照试验
doi:10.3233/BME-151517
更新日期:2015-01-01 00:00:00
abstract::Aqueous poly(vinyl alcohol) solutions were frozen at -20 degrees C for 6-12 h, and subsequently thawed for 1-2 h. The above mentioned process repeated for 1-3 times. After the specimen was dehydrated in vacuum, a kind of artificial articular cartilage--PVA-hydrogel--was developed. The micromorphology of PVA-hydrogel h...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1998-01-01 00:00:00
abstract:BACKGROUND:Accelerated hydrothermal aging has long been one of the most widely accepted quality control tests for simulating low-temperature degradation (LTD) in zirconia-containing implants used in total hip arthroplasty (THA). However, it is still unclear how much consistency there is between the experimental predict...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-201083
更新日期:2020-01-01 00:00:00
abstract::Motor imagery EEG-based BCI has advantages in the assistance of human control of peripheral devices, such as the mobile robot or wheelchair, because the subject is not exposed to any stimulation and suffers no risk of fatigue. However, the intensive training necessary to recognize the numerous classes of data makes it...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151409
更新日期:2015-01-01 00:00:00
abstract::DMPC and DSPC liposomes were prepared via thin film hydration method followed by sonication. Propranolol solution was incorporated into liposomes at hydration stage. TEM images showed the sizes of DSPC and DMPC were around 88 and 137 nm, respectively. The highest encapsulation ratio of propranolol was approximately 70...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-140997
更新日期:2014-01-01 00:00:00
abstract::The values of the propagation coefficient measured on a silicon rubber tube in the frequency range 1-15 Hz were compared, using four different equations. The first formula is based on three simultaneous pressure measurements performed at equidistant points; the remaining three equations are original, and make use of o...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1992-10-01 00:00:00
abstract::In this second part of the series of reviews, attention focuses on analytical and numerical methods that have been used to estimate the magnitude of the contact stress in: models of articular joints; models of total joint replacements, without and with the associated joint; or models of simple physical systems that ar...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章,评审
doi:
更新日期:1998-01-01 00:00:00
abstract::The method of formation of bioactive calcium-phosphate coating on medical titanium alloy Ti-6Al-4V (3.5-5.3% V; 5.3-6.8% Al; balance -Ti) by plasma electrolytic oxidation (PEO) has been developed. Evaluation of osteogenerating properties of the coating at fractures of the shaft of the femur on Wistar line laboratory r...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-161608
更新日期:2016-01-01 00:00:00
abstract::To evaluate the deterioration in the superelasticity of Ti-coated NiTi orthodontic wires, titanium was coated onto wires to form a 1-microm thick film using radio frequency magnetron sputtering. In superelasticity cycle tests, the sigma5.0 value (the stress at 5.0% strain) of a Ti-coated wire was lower than that of a ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2003-01-01 00:00:00
abstract::Bioartificial liver support provides a bridge to transplantation which is at present the only proven specific treatment for acute liver failure. In this paper, a novel multi-coaxial hollow fiber bioreactor so-called "Fibre-in-Fibre FIF Bioartificial liver device" with three compartments is experimentally and mathemati...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-130762
更新日期:2013-01-01 00:00:00
abstract::Various tissue-engineered vascular grafts have been studied in order to overcome the clinical disadvantages associated with conventional prostheses. However, previous tissue-engineered vascular grafts have possessed insufficient mechanical properties and thus have generally required either preoperative cellular manipu...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-141023
更新日期:2014-01-01 00:00:00
abstract::Facial nerve paralysis is a common disease due to nerve damage. Most approaches for evaluating the degree of facial paralysis rely on a set of different facial movements as commanded by doctors. Therefore, automatic recognition of the patterns of facial movement is fundamental to the evaluation of the degree of facial...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-141093
更新日期:2014-01-01 00:00:00
abstract::A novel technique and product for carpal tunnel microscopic surgical procedures using a modified medical device containing a head as a surgical scalpel under light guidance were designed and studied. The novel design of the medical device was developed and applied in a new carpal tunnel microscopic surgical procedure ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151303
更新日期:2015-01-01 00:00:00
abstract::The objective of this study is to evaluate whether the accumulation model developed by Zarfl et al. (2008) could be used to predict the minimal inhibitory concentration (MIC) of a group of antibacterial fluoroquinolones (FQs) for Escherichia coli (E. coli). Our model, which is based on the "Fick-Nernst-Planck" equatio...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-141203
更新日期:2014-01-01 00:00:00
abstract::A size-based blood cell sorting model with a micro-fence structure is proposed in the frame of immersed boundary and lattice Boltzmann method (IB-LBM). The fluid dynamics is obtained by solving the discrete lattice Boltzmann equation, and the cells motion and deformation are handled by the immersed boundary method. A ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-130833
更新日期:2014-01-01 00:00:00
abstract::Polycrystalline diamond (PCD) exhibits excellent abrasive characteristics and is commonly used as loose grains for precision machining of hard ceramics and other materials that are difficult to grind and polish. In the present study, we investigated using bonded PCD for polishing dental porcelain, for which a lustrous...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-2010-0642
更新日期:2010-01-01 00:00:00
abstract:BACKGROUND:Age is the most important risk factor for primary osteoarthritis (OA). Members of the TGF-β superfamily play a crucial role in chondrocyte differentiation and maintenance of healthy articular cartilage. OBJECTIVE:We have investigated whether age-related changes in TGF-β superfamily signaling components play...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-140976
更新日期:2014-01-01 00:00:00
abstract::The aim of this study is to verify the effect of indoor horse riding exercise on basal physical exercise and lumbar muscular function. The subjects included were 20 healthy females, who participated in the horse riding exercise using SRider (Rider Co. & ChonbuK National Univ, Korea) for 30 minutes per day, 3 days per ...
journal_title:Bio-medical materials and engineering
pub_type: 临床试验,杂志文章
doi:10.3233/BME-141053
更新日期:2014-01-01 00:00:00
abstract::The biological, biochemical, mechanical, and structural properties of artificial scaffolds for tissue engineering are known to be of great importance. Therefore, in this study a hydrogel derived scaffold with biomechanical and structural properties similar to native articular cartilage was synthesized. The gelatine-ba...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2005-01-01 00:00:00
abstract::Dry emulsion containing curcumin (DE-CUR) was prepared for oral delivery of poorly water-soluble curcumin, and its oral bioavailability and antiasthmatic efficacy was evaluated. After comparison of the solubility of curcumin in various oils, Plurol® Oleique CC497 was selected to be the oil phase due to its higher solu...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-130886
更新日期:2014-01-01 00:00:00
abstract::The mechanical properties of a contracting smooth muscle can be changed by changing its length. A viscoelastic material model was developed to predict the length-dependent stiffness changes when a constrained muscle is allowed to shorten under a constant external force. Three-dimensional finite element simulations wer...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1997-01-01 00:00:00
abstract::In this investigation, ultrasonic parameters of kidney stones are measured, in vitro, using a double probe ultrasonic-through-transmission technique. Due to the complex chemical structure of these stones, a large variation in the values of the ultrasonic parameters is found. A correlation between ultrasonic properties...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1992-07-01 00:00:00
abstract::We previously reported a simple method for the preparation of size-controlled spherical silver nanoparticles (Ag NPs) generated by autoclaving a mixture of silver-containing glass powder and glucose. The particle size is regulated by the glucose concentration, with concentrations of 0.25, 1.0 and 4.0 wt% glucose provi...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-130772
更新日期:2013-01-01 00:00:00
abstract:BACKGROUND:The periodontal ligament (PDL), which maintains homeostasis in the periodontium, is a group of specialized connective tissue fibers attached to both the cementum and alveolar bone. Regeneration of periodontium with PDL cells has been investigated, and the chemical and molecular structures of scaffolds contro...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-171709
更新日期:2018-01-01 00:00:00
abstract:BACKGROUND:Electrospinning is a highly effective method in order to generate nano-scaled fibers. In conventional electrospinning technique, geometry of nanofibers are mostly random due to the chaotic behavior of polymer jet. OBJECTIVE:Purpose of this study is to produce aligned nanofibers from PVP polymers with advanc...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-181017
更新日期:2018-01-01 00:00:00
abstract::The properties of blood flow in the outflow cannula of an axial blood pump play a critical role in potential thrombus formation and vascular injury. In this study, an in vitro flow visualization technique using particle image velocimetry (PIV) was applied to investigate the flow characteristics in the outflow cannula ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-130791
更新日期:2014-01-01 00:00:00
abstract::The objective of the present study was to find a standard substance for use as a reference in the cytotoxicity assay of biomaterials, as an alternative to animal experiments in recent years. Eight kinds of rubber were made in a plate shape to keep their surface area at 1 cm2 against 10 ml of extract volume. They were ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1994-01-01 00:00:00