Abstract：
:Polycrystalline diamond (PCD) exhibits excellent abrasive characteristics and is commonly used as loose grains for precision machining of hard ceramics and other materials that are difficult to grind and polish. In the present study, we investigated using bonded PCD for polishing dental porcelain, for which a lustrous surface is difficult to obtain by polishing. We compared the surface texture and characteristics of dental porcelain after polishing with bonded PCD with that obtained using bonded monocrystalline diamond (MCD), which is commonly used for this purpose. Polishing was performed at various pressures and rotational speeds on a custom-built polishing apparatus using bonded PCD or MCD with grain sizes of 3.92 μm on specimens consisting of VITA Omega 900 dentin porcelain after firing and then glazing to a specified surface roughness. The surface roughness of the polished porcelain and the abrasion quantity in terms of its polishing depth were measured, and its surface texture and characteristics were investigated. At low polishing pressures, PCD yielded a finer polished surface than MCD. The polishing depth after polishing for 20-30 min was approximately 2-3 μm with PCD and 1-2 μm with MCD. The polished surface was more uniform and smooth with PCD than with MCD.
journal_name
Biomed Mater Engjournal_title
Bio-medical materials and engineeringauthors
Nakamura Y,Sato H,Ohtsuka M,Hojo Sdoi
10.3233/BME-2010-0642subject
Has Abstractpub_date
2010-01-01 00:00:00pages
283-93issue
5eissn
0959-2989issn
1878-3619pii
271505641820160Gjournal_volume
20pub_type
杂志文章abstract：:The balance between extracellular inorganic phosphate (ePi) and extracellular inorganic pyrophosphate (ePPi) is controlled by four membrane proteins: the transporters ANK (exporting PPi outside the cells) and PiT-1 (importing ePi into the cells), and the enzymes PC-1 (generating ePPi from nucleotides) and Tissue Non-s...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：10.3233/BME-2010-0634
更新日期：2010-01-01 00:00:00
abstract：:The mechanical behavior of three styrenic thermoplastic block copolymer elastomers with applied surgical sutures was studied by uniaxial tensile testing. The materials exhibited oriented cylindrical microstructure. Distinct macroscopic deformation mechanisms have been observed upon stretching of samples with vertical ...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：10.3233/BME-130843
更新日期：2014-01-01 00:00:00
abstract：:To evaluate the ability of assessing the refractive change induced by myopic laser surgery using the intrinsic data, obtained from a reference intrinsic to the cornea. Twenty-nine eyes with laser in situ keratomileusis for myopia were included in the study. Statistical analyses were performed to determine the relation...
journal_title：Bio-medical materials and engineering
pub_type： 临床试验,杂志文章
doi：10.3233/BME-151374
更新日期：2015-01-01 00:00:00
abstract：:Low-dose computed tomography reconstruction is an important issue in the medical imaging domain. Sparse-view has been widely studied as a potential strategy. Compressed sensing (CS) method has shown great potential to reconstruct high-quality CT images from sparse-view projection data. Nonetheless, low-contrast struct...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：10.3233/BME-151437
更新日期：2015-01-01 00:00:00
abstract：:Crystalline hydroxyapatite (HA) powder was coated on titanium substrate by radio frequency (RF) magnetron sputtering. The coating was homogeneous thin film and the thickness was 1microm. Crystallinity of the HA coating was low and Ca/P ratio was high as 3.0. Particle sizes were 40 to approximately 100 nm, and the crys...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：
更新日期：2000-01-01 00:00:00
abstract：:The effect of hydroxyapatite sol (HAm) which is composed of unheating hydroxyapatite microcrystal particle on cell proliferation and alkaline phophatase activity in osteoblastic MC3T3-E1 cells, was examined in the presence or absence of fetal calfe serum (FCS) in the medium. In the absence of FCS, HAm inhibited the ce...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：
更新日期：2002-01-01 00:00:00
abstract：:We previously reported a simple method for the preparation of size-controlled spherical silver nanoparticles (Ag NPs) generated by autoclaving a mixture of silver-containing glass powder and glucose. The particle size is regulated by the glucose concentration, with concentrations of 0.25, 1.0 and 4.0 wt% glucose provi...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：10.3233/BME-130772
更新日期：2013-01-01 00:00:00
abstract：BACKGROUND:Access to peripheral veins is necessary for sample collection, transfusion and infusion of fluids or medications. The peripheral intravenous catheterization (PIVC) procedure is the introduction of a short catheter into a peripheral vein and can be problematic, leading to multiple failed attempts. PURPOSE:To...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章,评审
doi：10.3233/BME-120735
更新日期：2013-01-01 00:00:00
abstract：:Motor imagery EEG-based BCI has advantages in the assistance of human control of peripheral devices, such as the mobile robot or wheelchair, because the subject is not exposed to any stimulation and suffers no risk of fatigue. However, the intensive training necessary to recognize the numerous classes of data makes it...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：10.3233/BME-151409
更新日期：2015-01-01 00:00:00
abstract：:This study presents a novel spatial registration method of Image-guided neurosurgery system (IGNS) based on stereo-vision. Images of the patient's head are captured by a video camera, which is calibrated and tracked by an optical tracking system. Then, a set of sparse facial data points are reconstructed from them by ...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：10.3233/BME-151391
更新日期：2015-01-01 00:00:00
abstract：:Recognition of lung cancer cells is very important to the clinical diagnosis of lung cancer. In this paper we present a novel method to extract the structure characteristics of lung cancer cells and automatically recognize their types. Firstly soft mathematical morphology methods are used to enhance the grayscale imag...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：
更新日期：2006-01-01 00:00:00
abstract：:Biocompatible metals have been suggested as revolutionary biomaterials for bone-grafting therapies. Although metals and their alloys are widely and successfully used in producing biomedical implants due to their good mechanical properties and corrosion resistance, they have a lack in bioactivity. Therefore coating of ...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章,评审
doi：10.3233/BME-161568
更新日期：2016-05-12 00:00:00
abstract：:Two surface analytical spectroscopic techniques (namely, angular-dependent X-ray photoelectron spectroscopy and static secondary ion mass spectrometry) were used to characterize the nature and composition of the surface and near-surface layers formed on three biomedical polymers (namely, low-density polyethylene, expa...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：
更新日期：1995-01-01 00:00:00
abstract：:The method used in this paper is developed to estimate the degree of viscoelasticity of the blood vessel wall in a noninvasive mechanical method. In this proposed method, we can obtain an output waveform connected with mechanical behavior of blood vessels by using Ultrasonic Doppler Effect Sensory (UDES). Characterizi...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：
更新日期：1994-01-01 00:00:00
abstract：:In order to investigate the significance of hydroxyapatite based microporous composite (HA/mica composite) surfaces and a macroporous synthetic hydroxyapatite, rat marrow cell culture, which shows osteogenic differentiation, was carried out on six different culture substrata (two control culture dishes, two identical ...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：
更新日期：1999-01-01 00:00:00
abstract：BACKGROUND:Electrospinning is a highly effective method in order to generate nano-scaled fibers. In conventional electrospinning technique, geometry of nanofibers are mostly random due to the chaotic behavior of polymer jet. OBJECTIVE:Purpose of this study is to produce aligned nanofibers from PVP polymers with advanc...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：10.3233/BME-181017
更新日期：2018-01-01 00:00:00
abstract：:The purpose of this investigation was to assess mechanical properties of Superelastic Retraction Coil Springs for orthodontic use. To reach a goal, a test frame, comprising measuring force transducers was developed. To perform metallographic analyses of the nickel-titanium wire the samples of Superelastic Retraction C...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：10.3233/BME-2010-0647
更新日期：2010-01-01 00:00:00
abstract：:Previous literatures have indicated that hypothalamic paraventricular nucleus (PVN) neurons are important for regulating the level of sympathetic and vagal nervous activity. Sympathovagal balance is closely related to heart rate variability (HRV). However, it still requires further elucidation regarding the effect of ...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：10.3233/BME-151338
更新日期：2015-01-01 00:00:00
abstract：:Age-related macular degeneration (ARMD) and intraocular neovascular diseases have been treated clinically by anti-VEGF antibody drug bevacizumab. However, the use of bevacizumab in the treatment of retinal neovascular diseases has been limited due to the short half-life and frequent injections. In this research, novel...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：10.3233/BME-141003
更新日期：2014-01-01 00:00:00
abstract：:The aim of this study was to assess the characteristics of the CaP/Col composites, in powder and fiber form, via scanning electron microscopy (SEM), pH and calcium release evaluation after immersion in SBF and to evaluate the performance of these materials on the bone repair process in a tibial bone defect model. For ...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：10.3233/BME-161581
更新日期：2016-08-12 00:00:00
abstract：:Mechanical testing has been performed to characterize the locking strength of Morse taper locks used for reconstruction of large bone defects. Taper joint pairs were locked with a series of compressive loads increasing from 500 to 3500 N. Following each load application the taper locks were distracted with either an a...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：
更新日期：1997-01-01 00:00:00
abstract：:Longitudinal stent compression (LSC) is a new failure mode not previously observed in coronary stents. This phenomenon occurs when the physician tries to cross the deployed stent with other devices. While this phenomenon has been observed with a number of stent designs, it seems more common with the Element stent. A c...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：10.3233/BME-130781
更新日期：2014-01-01 00:00:00
abstract：:Significant progress has been achieved in the field of pH-sensitive drug delivery system in recent years. For layer-by-layer self-assembly nanocarriers, various pH values can induce the change of permeability and structural stability of the outer polyelectrolyte multi-layers, resulting in the release of the loaded dru...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：10.3233/BME-141033
更新日期：2014-01-01 00:00:00
abstract：OBJECTIVE:We aimed to develop a novel ultrasound system and examine its feasibility for noninvasively detecting thoracic aortic aneurysm (TAA) in clinical settings. METHODS:We developed a novel ultrasound system consisting of a modified console and data analysis algorithm. The exploratory study included 100 patients h...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：10.3233/BME-191047
更新日期：2019-01-01 00:00:00
abstract：:A driver's response to a front-coming vehicle collision consists of braking reaction time and braking behavior. The purpose was to investigate drivers' responses at different speeds, relative distances, and particularly the behavior on the accelerator at the collision moment. Twelve young men participated in driving s...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：10.3233/BME-151347
更新日期：2015-01-01 00:00:00
abstract：:Shape memory alloys (SMA) are being increasingly used in various industrial applications as actuators, connectors, or damping materials. In the medical field, superelastic devices such as eyeglass frames, stents or guide catheters have come to market in the recent years. The design of SMA devices has usually been base...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：
更新日期：1996-01-01 00:00:00
abstract：:This paper explores mouse kidney imaging with diffraction enhanced imaging (DEI) and inline outline X-ray imaging (IOXI) technology, and evaluates latent value of kidney imaging with phase contrast imaging technology. In our experiment, spatial resolution and tissue contrast serve as element evaluation and comparison....
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：10.3233/BME-130917
更新日期：2014-01-01 00:00:00
abstract：:Robotized endoscope holder in laparoscopic surgeries allows surgeons to control the endoscope without the assistants' intervention. In this paper, a new method is proposed for the automatic 3D-tracking of laparoscopic instruments in real-time to provide more convenient interactions between surgeons and the robotized e...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：10.3233/BME-141083
更新日期：2014-01-01 00:00:00
abstract：:The interaction between implant materials and bone cells or oral epithelial (OE) cells contributes to the clinical success of dental implants. The functional activity of cells in contact with an implant is determined by its surface properties. Before cells attach, extracellular matrix (ECM) in the serum deposits on th...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章,评审
doi：
更新日期：2004-01-01 00:00:00
abstract：:In this investigation, ultrasonic parameters of kidney stones are measured, in vitro, using a double probe ultrasonic-through-transmission technique. Due to the complex chemical structure of these stones, a large variation in the values of the ultrasonic parameters is found. A correlation between ultrasonic properties...
journal_title：Bio-medical materials and engineering
pub_type： 杂志文章
doi：
更新日期：1992-07-01 00:00:00
