Effect of hydroxyapatite sol on cell proliferation and alkaline phosphatase activity of osteoblastic MC3T3-E1 cells.

abstract：:Hyaluronic acid (HA) was used as an internal phase additive to improve the loading efficiency of ofloxacin, a hydrophilic drug encapsulated by hydrophobic polylactic-co-glycolic acid (PLGA) materials, through a double emulsion (water-in-oil-in-water) solvent extraction/evaporation method. Results from laser distributi...

journal_title：Bio-medical materials and engineering

authors： Wu G,Chen L,Li H,Wang YJ

更新日期：2014-01-01 00:00:00

abstract：:The aim of this study was to assess the characteristics of the CaP/Col composites, in powder and fiber form, via scanning electron microscopy (SEM), pH and calcium release evaluation after immersion in SBF and to evaluate the performance of these materials on the bone repair process in a tibial bone defect model. For ...

journal_title：Bio-medical materials and engineering

authors： Ueno FR,Kido HW,Granito RN,Gabbai-Armelin PR,Magri AM,Fernandes KR,da Silva AC,Braga FJ,Renno AC

更新日期：2016-08-12 00:00:00

abstract：:Sunscreens that absorb UV light without photodegradation could reduce skin cancer. Polyvinyl silsesquioxanes are known to have greater thermal and photochemical stability than organic compounds, such as those in sunscreens. This paper evaluates the UV transparency of vinyl silsesquioxanes (VS) and its hybrids with SiO...

journal_title：Bio-medical materials and engineering

authors： Wang H,Lin D,Wang D,Hu L,Huang Y,Liu L,Loy DA

更新日期：2014-01-01 00:00:00

abstract：BACKGROUND:The most common cause of coronary artery disease (CAD) is vascular damage with the cholesterol built-up and other materials on the inner arterial wall, known as atherosclerosis. OBJECTIVE:This paper aims to investigate the effect of stenosis on the hemodynamics in the four suspected coronary artery disease ...

journal_title：Bio-medical materials and engineering

authors： Kamangar S,Salman Ahmed NJ,Badruddin IA,Al-Rawahi N,Husain A,Govindaraju K,Yunus Khan TM

更新日期：2019-01-01 00:00:00

abstract：:Chitosan oligosaccharides graft polycaprolactone copolymer (PHCSO-g-PCL) has been synthesized via initiating the polymerization of e-caprolactone (CL) monomer through an amino group protection route using phthaloyl chitosan oligosaccharide (PHCSO) as intermediate. The grafting reaction was carried out in Pyridine at 1...

journal_title：Bio-medical materials and engineering

authors： Li F,Zhang X,Li H,Xiang L,Chen Y

更新日期：2014-01-01 00:00:00

abstract：:PVA-hydrogel has excellent biocompatibility as well as preferable tribological characteristics as an artificial articular cartilage. One of the most difficult problems is the attachment of PVA-hydrogel to the underlying bone (or metal substrate). In the present study, the micro-mechanical attachment between the PVA-hy...

journal_title：Bio-medical materials and engineering

authors： Gu ZQ,Xiao JM,Lou SQ

更新日期：1999-01-01 00:00:00

abstract：:The paper presents an application of the FSI technique to determine hemodynamics in the abdominal aorta (AA). To establish boundary conditions for the FSI study, MR anatomical data and 4D MRI velocity-mapping data (in three blood flow velocity directions and time) were collected to acquire realistic geometry of the AA...

journal_title：Bio-medical materials and engineering

authors： Zbicinski I,Veshkina N,Stefańczyk L

更新日期：2015-01-01 00:00:00

abstract：:Polycrystalline diamond (PCD) exhibits excellent abrasive characteristics and is commonly used as loose grains for precision machining of hard ceramics and other materials that are difficult to grind and polish. In the present study, we investigated using bonded PCD for polishing dental porcelain, for which a lustrous...

journal_title：Bio-medical materials and engineering

authors： Nakamura Y,Sato H,Ohtsuka M,Hojo S

更新日期：2010-01-01 00:00:00

abstract：:A new training system that can adjust training intensity and indicate the center pressure of a subject was proposed by applying controlled electric current to the Magneto-Rheological damper. The experimental studying on the muscular activities were performed in lower extremities during maintaining and moving exercises...

journal_title：Bio-medical materials and engineering

authors： Yu CH,Piao YJ,Kim K,Kwon TK

更新日期：2014-01-01 00:00:00

abstract：:Since adhesive technology was introduced into dental field, metal-based restoration has been gradually replaced by metal-free restoration. Using the adhesive technology, minimum invasive technique has been possible in daily clinical practice as well as esthetic tooth-colored restorations have become very popular all o...

journal_title：Bio-medical materials and engineering

authors： Nagano F,Selimovic D,Noda M,Ikeda T,Tanaka T,Miyamoto Y,Koshiro K,Sano H

更新日期：2009-01-01 00:00:00

abstract：:Morse code is now being harnessed for use in rehabilitation applications of augmentative-alternative communication and assistive technology, including mobility, environmental control and adapted worksite access. In this paper, Morse code is selected as a communication adaptive device for disabled persons who suffer fr...

journal_title：Bio-medical materials and engineering

authors： Yang CH,Luo CH,Yang CH,Chuang LY

更新日期：2004-01-01 00:00:00

abstract：:Magnesium has attracted a lot of attention as a new class of biodegradable material. The surface properties of magnesium in simulated body fluid (SBF) were investigated in the current research work. Cast magnesium samples with different surface characteristics were prepared which were then placed in SBF for 2, 4 and 8...

journal_title：Bio-medical materials and engineering

authors： Sana A,Malik I,Mujahid M,Akram MA,Adeel Umer M

更新日期：2019-01-01 00:00:00

abstract：:A novel technique and product for carpal tunnel microscopic surgical procedures using a modified medical device containing a head as a surgical scalpel under light guidance were designed and studied. The novel design of the medical device was developed and applied in a new carpal tunnel microscopic surgical procedure ...

journal_title：Bio-medical materials and engineering

authors： Chiang MC,Huang CC

更新日期：2015-01-01 00:00:00

abstract：:The in vivo and in vitro drug release profiles from a self-setting bioactive CaO-SiO2-P2O5 glass bone cement containing indomethacin as a model drug were investigated. The cement containing 2% and 5% indomethacin (IMC) powder hardened within 5 min after mixing with ammonium phosphate buffer. After setting, in vitro dr...

journal_title：Bio-medical materials and engineering

authors： Otsuka M,Nakahigashi Y,Matsuda Y,Kokubo T,Yoshihara S,Fujita H,Nakamura T

更新日期：1997-01-01 00:00:00

abstract：:To address the lack of 3D space information in the digital radiography of a patient femur, a pose estimation method based on 2D-3D rigid registration is proposed in this study. The method uses two digital radiography images to realize the preoperative 3D visualization of a fractured femur. Compared with the pure Digit...

journal_title：Bio-medical materials and engineering

authors： Zhang X,Zhu Y,Li C,Zhao J,Li G

更新日期：2014-01-01 00:00:00

abstract：:The effect of carbonate in reducing the crystal size of precipitated hydroxyapatite by approximately an order of magnitude has not been used previously in the preparation of gel monoliths for the fabrication of carbonate hydroxyapatite ceramics. The aim of this study was to devise a method whereby gel monoliths of car...

journal_title：Bio-medical materials and engineering

authors： Barralet JE,Best SM,Bonfield W

更新日期：1996-01-01 00:00:00

abstract：:To obtain an appropriate model for the simulation of the biomechanical behavior of brain tissue and the deformation of ventricles, in particular, we have developed a novel computerized plain strain finite element model. For optimum results, a multiple loading solutions approach using various tissue parameters for the ...

journal_title：Bio-medical materials and engineering

authors： Farmanzad F,Najarian S,Eslamee MR,Seddighi AS

更新日期：2007-01-01 00:00:00

abstract：PURPOSE:To establish a method for mouse coronary angiography in vivo using synchrotron radiation, which is essential for physiological and pathological research on coronary diseases. METHODS:1) The imaging parameters (e.g., photon energy, spatial resolution of the detector, and injection rate of contrast agent) optima...

journal_title：Bio-medical materials and engineering

authors： Xu L,Zhang A,Du G,Xie H,Chen Y

更新日期：2014-01-01 00:00:00

abstract：:In a previous work by the author [H.S. Hedia and M. Nemat-Alla, Design optimization of functionally graded dental implant, submitted to be published in the J. Bio-Medical Materials and Engineering], a functionally graded material dental implant was designed without cansellous bone in the model. In this investigation t...

journal_title：Bio-medical materials and engineering

authors： Hedia HS

更新日期：2005-01-01 00:00:00

abstract：:Most drug delivery systems as treatment modalities for osteomyelitis have not been evaluated for resistant infections. Tigecycline (TG) is an antimicrobial agent that could be used in the treatment of multi-drug-resistant orthopedic infections. The objective of this in vitro study has been to determine what dosage of ...

journal_title：Bio-medical materials and engineering

authors： Ignjatović NL,Ninkov P,Sabetrasekh R,Lyngstadaas SP,Uskoković DP

更新日期：2014-01-01 00:00:00

abstract：:Hydroxyapatite has been rubbed against ultra-high-molecular-weight-polyethylene (UHMWPE) under calcium-containg aqueous solutions. Further, hardness tests were carried out in air and in calcium-containing solutions whose pH ranged from pH 5 to pH 9. Hardness was found to vary with pH with a peak at around pH 7, i.e. -...

journal_title：Bio-medical materials and engineering

authors： Mazeau G,Czernuszka JT

更新日期：2001-01-01 00:00:00

abstract：:Sepsis is a systemic inflammatory response syndrome with high mortality, which results from severe infection and can lead to secondary organ dysfunction. It is one of the most common cause of death in intensive care unit. Clinical reports have shown that sepsis was often accompanied by thyroid dysfunction, which is ca...

journal_title：Bio-medical materials and engineering

authors： Luo B,Yu Z,Li Y

更新日期：2017-01-01 00:00:00

abstract：:A size-based blood cell sorting model with a micro-fence structure is proposed in the frame of immersed boundary and lattice Boltzmann method (IB-LBM). The fluid dynamics is obtained by solving the discrete lattice Boltzmann equation, and the cells motion and deformation are handled by the immersed boundary method. A ...

journal_title：Bio-medical materials and engineering

authors： Wei Q,Xu YQ,Tian FB,Gao TX,Tang XY,Zu WH

更新日期：2014-01-01 00:00:00

abstract：:In order to explore the effects of hydrogen sulfide (H2S) on myocardial fibrosis in diabetic rats and its underlying mechanisms, intraperitoneal injections of streptozotocin were used to establish the diabetes models and sodium hydrosulfide (NaHS) was used as an exogenous donor of H2S. Eight weeks later, Van Gieson st...

journal_title：Bio-medical materials and engineering

authors： Xiao T,Zeng O,Luo J,Wu Z,Li F,Yang J

更新日期：2015-01-01 00:00:00

abstract：:Age-related macular degeneration (ARMD) and intraocular neovascular diseases have been treated clinically by anti-VEGF antibody drug bevacizumab. However, the use of bevacizumab in the treatment of retinal neovascular diseases has been limited due to the short half-life and frequent injections. In this research, novel...

journal_title：Bio-medical materials and engineering

authors： Hu CC,Chaw JR,Chen CF,Liu HW

更新日期：2014-01-01 00:00:00

abstract：:Significant progress has been achieved in the field of pH-sensitive drug delivery system in recent years. For layer-by-layer self-assembly nanocarriers, various pH values can induce the change of permeability and structural stability of the outer polyelectrolyte multi-layers, resulting in the release of the loaded dru...

journal_title：Bio-medical materials and engineering

authors： Zhang HY,Sun YF,Sun YL,Zhou M

更新日期：2014-01-01 00:00:00

abstract：:Synthetic grafting materials, such as calcium phosphates (hydroxyapatite, HA; tricalcium phosphate, TCP), polymers, or composites thereof, can be used as osteoconductive scaffolds and delivery vehicles for osteoinductive growth factors. Carrier materials must be engineered to deliver these factors in a controlled fash...

journal_title：Bio-medical materials and engineering

authors： Santoni BG,Pluhar GE,Motta T,Wheeler DL

更新日期：2007-01-01 00:00:00

abstract：:We previously reported a simple method for the preparation of size-controlled spherical silver nanoparticles (Ag NPs) generated by autoclaving a mixture of silver-containing glass powder and glucose. The particle size is regulated by the glucose concentration, with concentrations of 0.25, 1.0 and 4.0 wt% glucose provi...

journal_title：Bio-medical materials and engineering

authors： Nguyen VQ,Ishihara M,Mori Y,Nakamura S,Kishimoto S,Fujita M,Hattori H,Kanatani Y,Ono T,Miyahira Y,Matsui T

更新日期：2013-01-01 00:00:00

abstract：OBJECTIVE:To characterize the structure and to evaluate the cytotoxicity of cellulose nanowhiskers (CNW) prepared from cotton linters. METHODS:A series of CNW dispersions was prepared by hydrolyzing cotton linters with sulfuric acid. The structure of CNW was characterized by scanning electron microscopy (SEM), transmi...

journal_title：Bio-medical materials and engineering

authors： Ni H,Zeng S,Wu J,Cheng X,Luo T,Wang W,Zeng W,Chen Y

更新日期：2012-01-01 00:00:00

abstract：BACKGROUND:Cuff electrodes have been widely used chronically in different clinical applications. Advancements have been made in selective stimulation by using multi-contact cuff electrodes. Steering anodic current is a strategy to increase selectivity by reshaping and localizing electric fields. There are two configura...

journal_title：Bio-medical materials and engineering

authors： Taghipour-Farshi H,Frounchi J,Ahmadiasl N,Shahabi P,Salekzamani Y

更新日期：2015-01-01 00:00:00