Counter-propagation network with variable degree variable step size LMS for single switch typing recognition.

abstract：:To evaluate the ability of assessing the refractive change induced by myopic laser surgery using the intrinsic data, obtained from a reference intrinsic to the cornea. Twenty-nine eyes with laser in situ keratomileusis for myopia were included in the study. Statistical analyses were performed to determine the relation...

journal_title：Bio-medical materials and engineering

authors： Liu Y,Wang Z,Wang Y

更新日期：2015-01-01 00:00:00

abstract：:The objective of the present study was to find a standard substance for use as a reference in the cytotoxicity assay of biomaterials, as an alternative to animal experiments in recent years. Eight kinds of rubber were made in a plate shape to keep their surface area at 1 cm2 against 10 ml of extract volume. They were ...

journal_title：Bio-medical materials and engineering

authors： Oshima H,Nakamura M

更新日期：1994-01-01 00:00:00

abstract：INTRODUCTION:Repairing contour defects is a challenge in plastic surgery. Different filling materials have been used with inadequate results and complications. The autologous fat transfer is the standard technique at the moment, but adipose tissue reserves are limited. The aim of our study was to compare in vivo on an ...

journal_title：Bio-medical materials and engineering

authors： Mojallal A,Lequeux C,Auxenfans C,Braye F,Damour O

更新日期：2008-01-01 00:00:00

abstract：:The thrust of the present work is the demonstration of the feasibility of using an enzyme-linked immunosorbent assay (ELISA) for the detection and quantification of a monoclonal antibody human serum. The antibodies used, 7E3 and D3GP3, have been proposed as platelet receptor blockers, being directed specifically again...

journal_title：Bio-medical materials and engineering

authors： Lewis G

更新日期：1994-01-01 00:00:00

abstract：:A novel technique and product for carpal tunnel microscopic surgical procedures using a modified medical device containing a head as a surgical scalpel under light guidance were designed and studied. The novel design of the medical device was developed and applied in a new carpal tunnel microscopic surgical procedure ...

journal_title：Bio-medical materials and engineering

authors： Chiang MC,Huang CC

更新日期：2015-01-01 00:00:00

abstract：OBJECTIVE:To characterize the structure and to evaluate the cytotoxicity of cellulose nanowhiskers (CNW) prepared from cotton linters. METHODS:A series of CNW dispersions was prepared by hydrolyzing cotton linters with sulfuric acid. The structure of CNW was characterized by scanning electron microscopy (SEM), transmi...

journal_title：Bio-medical materials and engineering

authors： Ni H,Zeng S,Wu J,Cheng X,Luo T,Wang W,Zeng W,Chen Y

更新日期：2012-01-01 00:00:00

abstract：:In this study, a computer-aided detection (CAD) system was developed for the detection of lung nodules in computed tomography images. The CAD system consists of four phases, including two-dimensional and three-dimensional preprocessing phases. In the feature extraction phase, four different groups of features are extr...

journal_title：Bio-medical materials and engineering

authors： Demir Ö,Yılmaz Çamurcu A

更新日期：2015-01-01 00:00:00

abstract：:The bonding strength of porcelains to metals depends on the oxide layer between the porcelain and the metal. Oxidation of a metal surface increases the bonding strength, whereas excessive oxidation decreases it. Titanium and its alloys are gaining acceptance for dental use since they exhibit excellent biocompatibility...

journal_title：Bio-medical materials and engineering

authors： Oshida Y,Hashem A

更新日期：1993-01-01 00:00:00

abstract：:Porous polyethylene (PP or Medpor) is an alloplastic material worldwide used for craniofacial reconstruction. Although several clinical studies are available, there is a lack as regard the genetic effects. Because PP is always fixed on bone and the mechanism by which PP acts on osteoblasts is unknown, we therefore att...

journal_title：Bio-medical materials and engineering

authors： Palmieri A,Pezzetti F,Brunelli G,Martinelli M,Scapoli L,Arlotti M,Masiero E,Carinci F

更新日期：2008-01-01 00:00:00

abstract：:A layer of L-glycine-molecule-imprinted polyaniline (LMIP-PANI) polymer film has been modified on a carbon fiber electrode for the determination of L-glycine standard samples and L-glycine in cerebrospinal fluid of wistar mice. It has been found that a linear relationship exists between current and concentration for t...

journal_title：Bio-medical materials and engineering

authors： Zeng H,Wang D,Yu J

更新日期：2014-01-01 00:00:00

abstract：:The finite element (FE) method has been widely used to investigate the mechanism of traumatic brain injuries (TBIs), because it is technically difficult to quantify the responses of the brain tissues to the impact in experiments. One of technical challenges to build a FE model of a human head is the modeling of the ce...

journal_title：Bio-medical materials and engineering

authors： Wu JZ,Pan CS,Wimer BM,Rosen CL

更新日期：2017-01-01 00:00:00

abstract：:Recent advances of fundamental research on the in vitro generation of red blood cells (RBCs) from hematopoietic stem cells in the laboratory open new possibilities of the utilization of cultured RBCs in transfusion medicine. We study the economic challenge of the setup and development of the mass industrial production...

journal_title：Bio-medical materials and engineering

authors： Mercier Ythier J

更新日期：2015-01-01 00:00:00

abstract：:The properties of blood flow in the outflow cannula of an axial blood pump play a critical role in potential thrombus formation and vascular injury. In this study, an in vitro flow visualization technique using particle image velocimetry (PIV) was applied to investigate the flow characteristics in the outflow cannula ...

journal_title：Bio-medical materials and engineering

authors： Liu G,Zhang Y,Chen H,Sun H,Zhou J,Hu S

更新日期：2014-01-01 00:00:00

abstract：:To obtain an appropriate model for the simulation of the biomechanical behavior of brain tissue and the deformation of ventricles, in particular, we have developed a novel computerized plain strain finite element model. For optimum results, a multiple loading solutions approach using various tissue parameters for the ...

journal_title：Bio-medical materials and engineering

authors： Farmanzad F,Najarian S,Eslamee MR,Seddighi AS

更新日期：2007-01-01 00:00:00

abstract：:Level set method has been widely used in medical image analysis, but it has difficulties when being used in the segmentation of left ventricular (LV) boundaries on echocardiography images because the boundaries are not very distinguish, and the signal-to-noise ratio of echocardiography images is not very high. In this...

journal_title：Bio-medical materials and engineering

authors： Zhang Y,Gao Y,Li H,Teng Y,Kang Y

更新日期：2015-01-01 00:00:00

abstract：OBJECTIVE:To study the comprehensive biomechanical properties of the cancellous bone of distal femur through a series of mechanical tests, and provide relevant subjects with the basic technical data. BACKGROUND:The study on bone mechanics is a commonly used approach to evaluate the biomechanical competency of bone. Th...

journal_title：Bio-medical materials and engineering

authors： Du C,Ma H,Ruo M,Zhang Z,Yu X,Zeng Y

更新日期：2006-01-01 00:00:00

abstract：:This paper established the extracting method and algorithm for liposome images on the basis of analyzing the form feature of liposome, and its corresponding automatic analysis software. Some algorithms, such as the logical algorithms of mathematical morphology, the grayscale-gradient co-occurrence matrix-based method ...

journal_title：Bio-medical materials and engineering

authors： Haitao X,Kuanghu H,Wanfang S,Shuyu L,Desen S

更新日期：2002-01-01 00:00:00

abstract：:A fracture mechanics approach has been adopted in the present study to investigate the fracture toughness behavior of three commercial composite resins for dental use named Clearfil photo posterior, P-50 and Occlusin. The resins have been cast in to ring-shaped specimens for the determination of individual fracture to...

journal_title：Bio-medical materials and engineering

authors： Higo Y,Damri D,Nunomura S,Kumada K,Sawa N,Hanaoka K,Teranaka T,Iwamoto T

更新日期：1991-01-01 00:00:00

abstract：BACKGROUND:Adipose tissue engineering has been studied as an alternative to current options for breast reconstruction, such as lipofilling, flap reconstruction, and silicone implants. Previously, we demonstrated that a poly(L-lactic acid) mesh containing a collagen sponge, containing neither cells nor growth factors, c...

journal_title：Bio-medical materials and engineering

authors： Kambe Y,Ogino S,Yamanaka H,Morimoto N,Yamaoka T

更新日期：2020-01-01 00:00:00

abstract：:Polycrystalline diamond (PCD) exhibits excellent abrasive characteristics and is commonly used as loose grains for precision machining of hard ceramics and other materials that are difficult to grind and polish. In the present study, we investigated using bonded PCD for polishing dental porcelain, for which a lustrous...

journal_title：Bio-medical materials and engineering

authors： Nakamura Y,Sato H,Ohtsuka M,Hojo S

更新日期：2010-01-01 00:00:00

abstract：:NiTi alloy used in dental prosthetic fixators shows pseudoelastic behaviour and exhibits a great potential in dental and orthopaedic applications where constant correcting loads are required. In order to use such materials in dental prosthetic fixators, where the device is cyclically deformed, it is necessary to inves...

journal_title：Bio-medical materials and engineering

authors： Sabrià J,Cortada M,Giner L,Gil FJ,Fernández E,Manero JM,Planell JA

更新日期：1996-01-01 00:00:00

abstract：:The effect of carbonate in reducing the crystal size of precipitated hydroxyapatite by approximately an order of magnitude has not been used previously in the preparation of gel monoliths for the fabrication of carbonate hydroxyapatite ceramics. The aim of this study was to devise a method whereby gel monoliths of car...

journal_title：Bio-medical materials and engineering

authors： Barralet JE,Best SM,Bonfield W

更新日期：1996-01-01 00:00:00

abstract：:An alternative non-vascular extracellular material was obtained by decellularisation of porcine urinary bladder and examined for its potential as scaffold for vascular tissue engineering. Analysis using Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM) and Laser Scanning Microscopy (LSCM) showed a poro...

journal_title：Bio-medical materials and engineering

authors： Piterina AV,Callanan A,Davis L,Meaney C,Walsh M,McGloughlin TM

更新日期：2009-01-01 00:00:00

abstract：:A robust method for inducing bone-formation without an autograft has not been established. Currently, both platelet-rich plasma (PRP) and bone morphogenetic protein (BMP) have been widely investigated for their clinical use in such cases. However, their synergistic effect is still controversial and previously shown di...

journal_title：Bio-medical materials and engineering

authors： Yoshida K,Sumita Y,Marukawa E,Harashima M,Asahina I

更新日期：2013-01-01 00:00:00

abstract：:This paper presents an X-ray diffraction method of measuring the residual stress/strain in bone tissue of rabbit's tibia. To derive the residual stress, bone powder of the diameter less than 40 micrometers was used as a control specimen at non-stressed state. From the X-ray measurements, it was clear that the distribu...

journal_title：Bio-medical materials and engineering

authors： Tadano S,Okoshi T

更新日期：2006-01-01 00:00:00

abstract：:To select tag single nucleotide polymorphisms (SNPs) within and around human p75 neurotrophin receptor (p75NTR) gene in Chinese Han population, the sequence involving p75NTR gene as well as the upstream and downstream of the gene was identified according to the data from National Center for Biotechnology Information (...

journal_title：Bio-medical materials and engineering

authors： Wang YT,Lu XM,Shu YH,Xiao L,Chen KT

更新日期：2014-01-01 00:00:00

abstract：:Various tissue-engineered vascular grafts have been studied in order to overcome the clinical disadvantages associated with conventional prostheses. However, previous tissue-engineered vascular grafts have possessed insufficient mechanical properties and thus have generally required either preoperative cellular manipu...

journal_title：Bio-medical materials and engineering

authors： Wang F,Mohammed A,Li C,Ge P,Wang L,King MW

更新日期：2014-01-01 00:00:00

abstract：:A driver's response to a front-coming vehicle collision consists of braking reaction time and braking behavior. The purpose was to investigate drivers' responses at different speeds, relative distances, and particularly the behavior on the accelerator at the collision moment. Twelve young men participated in driving s...

journal_title：Bio-medical materials and engineering

authors： Gao Z,Li C,Hu H,Zhao H,Chen C,Yu H

更新日期：2015-01-01 00:00:00

abstract：:To investigate the inhibition effect of oxymatrine induces human lung cancer A549 cells apoptosis. The A549 cells were cultured for 24 h, than the various concentration of oxymatrine (2 mmol/L, 4 mmol/L, 8 mmol/L, 15 mmol/L) were added into different experimental group cells, and 5-fluorouracil were added into the pos...

journal_title：Bio-medical materials and engineering

authors： Wang B,Han Q,Zhu Y

更新日期：2015-01-01 00:00:00

abstract：:Bioelectrical impedance phase angle has been recommended as a tool to assess nutrition state, but there are no measuring devices have been specially designed for hospital residents. In this study, a system was established for the measurement of bioelectrical impedance phase angle. The electrical composition, calculati...

journal_title：Bio-medical materials and engineering

authors： Zhang G,Huo X,Wu C,Zhang C,Duan Z

更新日期：2014-01-01 00:00:00