Abstract:
:An alternative non-vascular extracellular material was obtained by decellularisation of porcine urinary bladder and examined for its potential as scaffold for vascular tissue engineering. Analysis using Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM) and Laser Scanning Microscopy (LSCM) showed a porous interconnective microarchitecture, an abundance of well preserved fibers on the abluminal side and a micropatterned flat luminal surface. Uniaxial tensile testing revealed a strength of 1.9+/-0.3 MPa for the rehydrated material in a phosphate buffered saline medium for the ECM-UBM sheet and these results comparable to those of native artery of a middle aged human. Multilamination of the UBM increases the tensile properties in general (9+/-0.45 MPa for 2 layer, 30+/-0.6 MPa for 4 layers construct), with no effect on elongation capacities (38-40%) of the material. Contact-angle measurements indicated that the ECM-UBM surface exhibited a hydrophylic characteristic and better wettability than any vascular synthetic materials. Comparison of the initial adhesion in the multiplayer ECM constructs was evaluated and was found not to be altered by the preparation. The HAECs and HSMC shown an excellent adherence, spread and proliferation on the ECM-UBM material with the preservation of the cell phenotype. The level of MMP-1 and MMP-9 produced by endothelial cells was evaluated in this study and provides some data on the remodelling capacity of the scaffold. Vascular cell seeded-UBM constructs may also provide a suitable and affordable in vitro model for cell-physiology and drug development studies, which may elucidate to the mechanisms of vascular disease formation, and its prevention and treatment.
journal_name
Biomed Mater Engjournal_title
Bio-medical materials and engineeringauthors
Piterina AV,Callanan A,Davis L,Meaney C,Walsh M,McGloughlin TMdoi
10.3233/BME-2009-0598subject
Has Abstractpub_date
2009-01-01 00:00:00pages
333-48issue
4-5eissn
0959-2989issn
1878-3619pii
12W7P0012K63214Xjournal_volume
19pub_type
杂志文章abstract::High order partial least squares (HOPLS) is a novel data processing method. It is highly suitable for building prediction model which has tensor input and output. The objective of this study is to build a prediction model of the relationship between sinoatrial node field potential and high glucose using HOPLS. The thr...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151482
更新日期:2015-01-01 00:00:00
abstract::DNA-binding proteins are involved and play a crucial role in a lot of important biological processes. Hence, the identification of the DNA-binding proteins is a challenging and significant problem. In order to reveal the intrinsic information correlated to DNA-binding, nine classes of candidate features based on diffe...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151491
更新日期:2015-01-01 00:00:00
abstract:INTRODUCTION:Repairing contour defects is a challenge in plastic surgery. Different filling materials have been used with inadequate results and complications. The autologous fat transfer is the standard technique at the moment, but adipose tissue reserves are limited. The aim of our study was to compare in vivo on an ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2008-01-01 00:00:00
abstract::To evaluate the deterioration in the superelasticity of Ti-coated NiTi orthodontic wires, titanium was coated onto wires to form a 1-microm thick film using radio frequency magnetron sputtering. In superelasticity cycle tests, the sigma5.0 value (the stress at 5.0% strain) of a Ti-coated wire was lower than that of a ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2003-01-01 00:00:00
abstract::Microarray data has small samples and high dimension, and it contains a significant amount of irrelevant and redundant genes. This paper proposes a hybrid ensemble method based on double disturbance to improve classification performance. Firstly, original genes are ranked through reliefF algorithm and part of the gene...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151499
更新日期:2015-01-01 00:00:00
abstract::NiTi alloy used in dental prosthetic fixators shows pseudoelastic behaviour and exhibits a great potential in dental and orthopaedic applications where constant correcting loads are required. In order to use such materials in dental prosthetic fixators, where the device is cyclically deformed, it is necessary to inves...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1996-01-01 00:00:00
abstract::In this study, biocompatibility of 17-4 PH stainless steel foam for biomedical implant applications was investigated. 17-4 PH stainless steel foams having porosities in the range of 40-82% with an average pore size of around 600 μm were produced by space holder-sintering technique. Sintered foams were precipitation ha...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-2011-0671
更新日期:2011-01-01 00:00:00
abstract::The purpose of this investigation was to assess mechanical properties of Superelastic Retraction Coil Springs for orthodontic use. To reach a goal, a test frame, comprising measuring force transducers was developed. To perform metallographic analyses of the nickel-titanium wire the samples of Superelastic Retraction C...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-2010-0647
更新日期:2010-01-01 00:00:00
abstract::Two different types of colloidal lipid particles are presented and compared as innovative carrier systems. Size distribution and storage stability of formulations produced by hot high pressure homogenisation in lab and medium scale production were investigated by laser diffractometry (LD) and photon correlation spectr...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2005-01-01 00:00:00
abstract::Most drug delivery systems as treatment modalities for osteomyelitis have not been evaluated for resistant infections. Tigecycline (TG) is an antimicrobial agent that could be used in the treatment of multi-drug-resistant orthopedic infections. The objective of this in vitro study has been to determine what dosage of ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-140978
更新日期:2014-01-01 00:00:00
abstract::The in vivo and in vitro drug release profiles from a self-setting bioactive CaO-SiO2-P2O5 glass bone cement containing indomethacin as a model drug were investigated. The cement containing 2% and 5% indomethacin (IMC) powder hardened within 5 min after mixing with ammonium phosphate buffer. After setting, in vitro dr...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1997-01-01 00:00:00
abstract:OBJECTIVE:To characterize the structure and to evaluate the cytotoxicity of cellulose nanowhiskers (CNW) prepared from cotton linters. METHODS:A series of CNW dispersions was prepared by hydrolyzing cotton linters with sulfuric acid. The structure of CNW was characterized by scanning electron microscopy (SEM), transmi...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-2012-0697
更新日期:2012-01-01 00:00:00
abstract::A multidirectional pin-on-plate reciprocating machine was used to compare the wear performance of UHMWPE sliding against cast cobalt chrome (CoCr) plates that were either untreated or coated with Amorphous Diamond Like Carbon (ADLC). The test conditions were based on a 1/5 scale model representative of in vivo motion ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2001-01-01 00:00:00
abstract::The properties of blood flow in the outflow cannula of an axial blood pump play a critical role in potential thrombus formation and vascular injury. In this study, an in vitro flow visualization technique using particle image velocimetry (PIV) was applied to investigate the flow characteristics in the outflow cannula ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-130791
更新日期:2014-01-01 00:00:00
abstract::Polylactic acid (PLA)/styrene-ethylene-butylene-styrene (SEBS) composites were prepared by melt blending. Differential scanning calorimetry (DSC) and wide angle X-ray diffraction (WXRD) were used to characterize PLA and PLA/SEBS composites in terms of their melting behavior and crystallization. Curves from thermal gra...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151300
更新日期:2015-01-01 00:00:00
abstract:OBJECTIVE:Normal pregnancy is associated with profound alterations in the maternal cardiovascular system and PPG represents a sensitive and convenient technique capable of tracking changes in the pulsatile function of arteries. The aim of this study was to investigate the effects of maternal cardiovascular alterations ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-130801
更新日期:2014-01-01 00:00:00
abstract::The aim of the present study was to determine the degradability of aliphatic polyurethanes, based on a different amount of synthetic, atactic poly[(R,S)-3-hydroxybutyrate] (a-PHB), in hydrolytic (phosphate buffer) and oxidative (H2O2/CoCl2) solutions. The soft segments were built with atactic poly[(R,S)-3-hydroxybutyr...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151262
更新日期:2015-01-01 00:00:00
abstract::This study presents a novel spatial registration method of Image-guided neurosurgery system (IGNS) based on stereo-vision. Images of the patient's head are captured by a video camera, which is calibrated and tracked by an optical tracking system. Then, a set of sparse facial data points are reconstructed from them by ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151391
更新日期:2015-01-01 00:00:00
abstract::Crystalline hydroxyapatite (HA) powder was coated on titanium substrate by radio frequency (RF) magnetron sputtering. The coating was homogeneous thin film and the thickness was 1microm. Crystallinity of the HA coating was low and Ca/P ratio was high as 3.0. Particle sizes were 40 to approximately 100 nm, and the crys...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2000-01-01 00:00:00
abstract::Recent advances of fundamental research on the in vitro generation of red blood cells (RBCs) from hematopoietic stem cells in the laboratory open new possibilities of the utilization of cultured RBCs in transfusion medicine. We study the economic challenge of the setup and development of the mass industrial production...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-141251
更新日期:2015-01-01 00:00:00
abstract::Metal patch test is often used in clinical settings when metal-induced contact dermatitis is suspected. However, the transdermal permeation behavior of metal ions from the patch test remains unclear. Current patch tests using high concentrations of metal salt solutions have some side effects, e.g. acute skin reactions...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151543
更新日期:2015-01-01 00:00:00
abstract:BACKGROUND:The most common cause of coronary artery disease (CAD) is vascular damage with the cholesterol built-up and other materials on the inner arterial wall, known as atherosclerosis. OBJECTIVE:This paper aims to investigate the effect of stenosis on the hemodynamics in the four suspected coronary artery disease ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-191067
更新日期:2019-01-01 00:00:00
abstract::The method used in this paper is developed to estimate the degree of viscoelasticity of the blood vessel wall in a noninvasive mechanical method. In this proposed method, we can obtain an output waveform connected with mechanical behavior of blood vessels by using Ultrasonic Doppler Effect Sensory (UDES). Characterizi...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1994-01-01 00:00:00
abstract::In order to explore the effects of hydrogen sulfide (H2S) on myocardial fibrosis in diabetic rats and its underlying mechanisms, intraperitoneal injections of streptozotocin were used to establish the diabetes models and sodium hydrosulfide (NaHS) was used as an exogenous donor of H2S. Eight weeks later, Van Gieson st...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151508
更新日期:2015-01-01 00:00:00
abstract::Numerous constitutive models describing the mechanical properties of tendons have been proposed during the past few decades. However, few were widely used owing to the lack of implementation in the general finite element (FE) software, and very few systematic studies have been done on selecting the most appropriate pa...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-2011-0653
更新日期:2011-01-01 00:00:00
abstract::In this investigation, ultrasonic parameters of kidney stones are measured, in vitro, using a double probe ultrasonic-through-transmission technique. Due to the complex chemical structure of these stones, a large variation in the values of the ultrasonic parameters is found. A correlation between ultrasonic properties...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1992-07-01 00:00:00
abstract:BACKGROUND:The periodontal ligament (PDL), which maintains homeostasis in the periodontium, is a group of specialized connective tissue fibers attached to both the cementum and alveolar bone. Regeneration of periodontium with PDL cells has been investigated, and the chemical and molecular structures of scaffolds contro...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-171709
更新日期:2018-01-01 00:00:00
abstract:BACKGROUND:Age is the most important risk factor for primary osteoarthritis (OA). Members of the TGF-β superfamily play a crucial role in chondrocyte differentiation and maintenance of healthy articular cartilage. OBJECTIVE:We have investigated whether age-related changes in TGF-β superfamily signaling components play...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-140976
更新日期:2014-01-01 00:00:00
abstract::Shape memory alloys (SMA) are being increasingly used in various industrial applications as actuators, connectors, or damping materials. In the medical field, superelastic devices such as eyeglass frames, stents or guide catheters have come to market in the recent years. The design of SMA devices has usually been base...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1996-01-01 00:00:00
abstract::Muscular rigidity and atrophy caused by long-term underactivity usually lead to foot drop, strephenopodia, foot extorsion or some other complications for the lower limb movement disorders or lower limb surgery sufferers. The ankle-foot orthosis can help patients conduct the right ankle motion mode training, inhibit sp...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151356
更新日期:2015-01-01 00:00:00