Abstract:
BACKGROUND:The periodontal ligament (PDL), which maintains homeostasis in the periodontium, is a group of specialized connective tissue fibers attached to both the cementum and alveolar bone. Regeneration of periodontium with PDL cells has been investigated, and the chemical and molecular structures of scaffolds control the adhesion and differentiation of cells. Therefore, the development of adequate materials for PDL-derived cells is essential to regenerate the periodontium. OBJECTIVE:We evaluated the suitable passage time for PDL-derived cells and investigated the behaviors of PDL-derived cells grown on hydroxyapatite (HAp) scaffolds coated with type I and type III collagen. METHODS:PDL-derived cells were isolated with enzyme from the upper molars of male Wister rats. After characterization of HAp, type I collagen, and type III collagen, PDL-derived cells at passage 2 were seeded onto collagen-coated HAp. Cell adhesion, proliferative potential, and osteoconductivity were analyzed with immunostaining, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays, Alizarin S staining, and real-time polymerase chain reaction. RESULTS:Type I and III collagens were successfully coated on HAp. Gene expression analysis revealed that passage 2 was suitable for maintaining differentiation potential. Proliferative potential and cell adhesion were significantly higher on type III collagen than on HAp alone or type I collagen. In contrast, the osteoconductivity of type III collagen was significantly lower than those of HAp and type I collagen. CONCLUSION:PDL-derived cells on type I collagen differentiated into osteogenic cells and formed hard tissues. However, type III collagen enhanced the adhesion of PDL-derived cells and inhibited mineralization.
journal_name
Biomed Mater Engjournal_title
Bio-medical materials and engineeringauthors
Fujita K,Nozaki K,Horiuchi N,Yamashita K,Miura H,Nagai Adoi
10.3233/BME-171709subject
Has Abstractpub_date
2018-01-01 00:00:00pages
15-27issue
1eissn
0959-2989issn
1878-3619pii
BME1709journal_volume
29pub_type
杂志文章abstract::The objective of this study is to evaluate whether the accumulation model developed by Zarfl et al. (2008) could be used to predict the minimal inhibitory concentration (MIC) of a group of antibacterial fluoroquinolones (FQs) for Escherichia coli (E. coli). Our model, which is based on the "Fick-Nernst-Planck" equatio...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-141203
更新日期:2014-01-01 00:00:00
abstract::The aim of the present study was to determine the degradability of aliphatic polyurethanes, based on a different amount of synthetic, atactic poly[(R,S)-3-hydroxybutyrate] (a-PHB), in hydrolytic (phosphate buffer) and oxidative (H2O2/CoCl2) solutions. The soft segments were built with atactic poly[(R,S)-3-hydroxybutyr...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151262
更新日期:2015-01-01 00:00:00
abstract::Aqueous poly(vinyl alcohol) solutions were frozen at -20 degrees C for 6-12 h, and subsequently thawed for 1-2 h. The above mentioned process repeated for 1-3 times. After the specimen was dehydrated in vacuum, a kind of artificial articular cartilage--PVA-hydrogel--was developed. The micromorphology of PVA-hydrogel h...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1998-01-01 00:00:00
abstract::The present review surveys studies on physical-chemical properties and biological response of living tissues to NiTi (Nitinol) carried out recently, aiming at an understanding of the place of this material among the implant alloys in use. Advantages of shape memory and superelasticity are analyzed in respect to functi...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章,评审
doi:
更新日期:2002-01-01 00:00:00
abstract:BACKGROUND:The use of helmets was considered to be one of the important prevention strategies employed on construction sites. The shock absorption performance of a construction (or industrial) helmet is its most important performance parameter. Industrial helmets will experience cumulative structural damage when being ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-201132
更新日期:2021-01-01 00:00:00
abstract::Reoperation of aldehyde tanned bioprotheses due to calcific degeneration remains their major drawback. Based on experiments studying mechanisms and factors that influence the time phase, extent and progression of calcification and evaluating the efficiency of anticalcification treatments and the effects of surface see...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2004-01-01 00:00:00
abstract:BACKGROUND:Patients use mouthwashes in addition to mechanical cleaning during orthodontic treatment. The effects of mouthwashes on the archwires have not been examined yet. OBJECTIVE:To compare the corrosion resistance of four different arch wires and corrosion effects of different mouthwashes to formulate a biocompat...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-161607
更新日期:2016-11-25 00:00:00
abstract::The interaction between implant materials and bone cells or oral epithelial (OE) cells contributes to the clinical success of dental implants. The functional activity of cells in contact with an implant is determined by its surface properties. Before cells attach, extracellular matrix (ECM) in the serum deposits on th...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章,评审
doi:
更新日期:2004-01-01 00:00:00
abstract::The stability of the Co-Cr-Mo dental alloy immersed in artificial salivas (pH 6.7) was investigated over 24 h. Three artificial salivas have been studied: saline saliva (saliva I); saline saliva buffered with phosphate ions (saliva II) and saliva II plus mucin molecules (saliva III). For all the systems, open circuit ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-141241
更新日期:2015-01-01 00:00:00
abstract:BACKGROUND:Platelet-rich plasma (PRP) has been used to solubilize freeze-dried chitosan (CS) formulations to form injectable implants for tissue repair. OBJECTIVE:To determine whether the in vitro performance of the formulations depends on the type of PRP preparation used to solubilize CS. METHODS:Formulations contai...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-191058
更新日期:2019-01-01 00:00:00
abstract::The method of formation of bioactive calcium-phosphate coating on medical titanium alloy Ti-6Al-4V (3.5-5.3% V; 5.3-6.8% Al; balance -Ti) by plasma electrolytic oxidation (PEO) has been developed. Evaluation of osteogenerating properties of the coating at fractures of the shaft of the femur on Wistar line laboratory r...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-161608
更新日期:2016-01-01 00:00:00
abstract:BACKGROUND:Adhesive resin composite, which is used to bond orthodontic bracket to tooth surface is exposed to the influence of wear by tooth brushing and wear may influence loosening of the bracket. OBJECTIVE:The aim of this study was to evaluate in vitro the effect of tooth brushing on the adhesion strength of orthod...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-161592
更新日期:2016-09-28 00:00:00
abstract::Alginate hydrogels have been used widely in tissue engineering for cell encapsulation for several reasons: low toxicity, the ability to gel under gentle condition and compatibility with cells. In this study, we determined the effect of different concentrations of alginate on encapsulation of 3T3 fibroblast cells at tw...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-2011-0665
更新日期:2011-01-01 00:00:00
abstract::Electroencephalograph (EEG) signals feature extraction and processing is one of the most difficult and important part in the brain-computer interface (BCI) research field. EEG signals are generally unstable, complex and have low signal-noise ratio, which is difficult to be analyzed and processed. To solve this problem...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-141113
更新日期:2014-01-01 00:00:00
abstract::In this study, a computer-aided detection (CAD) system was developed for the detection of lung nodules in computed tomography images. The CAD system consists of four phases, including two-dimensional and three-dimensional preprocessing phases. In the feature extraction phase, four different groups of features are extr...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151418
更新日期:2015-01-01 00:00:00
abstract::Recent advances of fundamental research on the in vitro generation of red blood cells (RBCs) from hematopoietic stem cells in the laboratory open new possibilities of the utilization of cultured RBCs in transfusion medicine. We study the economic challenge of the setup and development of the mass industrial production...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-141251
更新日期:2015-01-01 00:00:00
abstract::Stroke is a major cause of death and disability throughout the world. Subtotal occlusion of the carotid artery is an important risk factor for stroke. Carotid artery stenting (CAS) is increasingly being used for treatment of carotid artery stenosis. There are many reports on treating carotid artery stenosis by CAS; ho...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-2012-0687
更新日期:2012-01-01 00:00:00
abstract::The aim of this study was to assess the characteristics of the CaP/Col composites, in powder and fiber form, via scanning electron microscopy (SEM), pH and calcium release evaluation after immersion in SBF and to evaluate the performance of these materials on the bone repair process in a tibial bone defect model. For ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-161581
更新日期:2016-08-12 00:00:00
abstract::This work evaluated the effects of UV irradiation, plasma radiation, steam and 70% ethanol treatments on the sterilization and integrity of auto-crosslinked hyaluronic acid (HA-ACP) scaffolds structured in microparticles and sponges aiming in vivo applications for regenerative medicine of bone tissue. The integrity of...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151558
更新日期:2015-01-01 00:00:00
abstract::To obtain an appropriate model for the simulation of the biomechanical behavior of brain tissue and the deformation of ventricles, in particular, we have developed a novel computerized plain strain finite element model. For optimum results, a multiple loading solutions approach using various tissue parameters for the ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2007-01-01 00:00:00
abstract::Microarray data has small samples and high dimension, and it contains a significant amount of irrelevant and redundant genes. This paper proposes a hybrid ensemble method based on double disturbance to improve classification performance. Firstly, original genes are ranked through reliefF algorithm and part of the gene...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151499
更新日期:2015-01-01 00:00:00
abstract::The ion selective transport plays an important role in the function of cell membranes, and promotes the application of artificial permeable membranes. This phenomenon has been studied in case for different diameters and functional groups of nanopores. In this work, we focus on the effect of anions on cation selectivit...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-130822
更新日期:2014-01-01 00:00:00
abstract::The in vivo and in vitro drug release profiles from a self-setting bioactive CaO-SiO2-P2O5 glass bone cement containing indomethacin as a model drug were investigated. The cement containing 2% and 5% indomethacin (IMC) powder hardened within 5 min after mixing with ammonium phosphate buffer. After setting, in vitro dr...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1997-01-01 00:00:00
abstract::The debris generated by the progressive wear of total joint replacement (TJR) devices is considered a primary cause of osteolysis, bone resorption, and premature failure of artificial hips and knees. The vast majority of this debris originates from the UHMWPE articulating surfaces caused by tribological interaction wi...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1994-01-01 00:00:00
abstract::Local strains acting across an area of skin loaded uniaxially in vivo are converted to stresses using the standard elastic formulae. The stress values are compared to those obtained using the classical Bossinesq and Michell stress functions. The results indicate that these functions are capable of describing the respo...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1994-01-01 00:00:00
abstract:BACKGROUND:Accelerated hydrothermal aging has long been one of the most widely accepted quality control tests for simulating low-temperature degradation (LTD) in zirconia-containing implants used in total hip arthroplasty (THA). However, it is still unclear how much consistency there is between the experimental predict...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-201083
更新日期:2020-01-01 00:00:00
abstract:OBJECTIVES:Chondrocytes hypertrophy is a physiological process observed in endochondral ossification during development until adolescence in human. It can also be observed during pathophysiological conditions such as osteoarthritis. Hypertrophic chondrocytes synthesise collagen X and express matrix metalloproteinase 13...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-141252
更新日期:2015-01-01 00:00:00
abstract::Hydroxyapatite is widely utilized as a component in dental hygiene agents. The ability to adsorb and remove dental plaque adhering to tooth surfaces is recognized as an important property of hydroxyapatite particles. In this study, the adsorptive ability of hydroxyapatite was evaluated based on its adsorptive amount a...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1999-01-01 00:00:00
abstract::Correlation-based feature selection (CFS) using neighborhood mutual information (NMI) and particle swarm optimization (PSO) are combined into an ensemble technique in this paper. Based on this observation, an efficient gene selection algorithm, denoted by NMICFS-PSO, is proposed. Several cancer recognition tasks are g...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-130897
更新日期:2014-01-01 00:00:00
abstract::An alternative non-vascular extracellular material was obtained by decellularisation of porcine urinary bladder and examined for its potential as scaffold for vascular tissue engineering. Analysis using Scanning Electron Microscopy (SEM), Atomic Force Microscopy (AFM) and Laser Scanning Microscopy (LSCM) showed a poro...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-2009-0598
更新日期:2009-01-01 00:00:00