The effect of counter-ions on the ion selectivity of potassium and sodium ions in nanopores.

abstract：:Level set method has been widely used in medical image analysis, but it has difficulties when being used in the segmentation of left ventricular (LV) boundaries on echocardiography images because the boundaries are not very distinguish, and the signal-to-noise ratio of echocardiography images is not very high. In this...

journal_title：Bio-medical materials and engineering

authors： Zhang Y,Gao Y,Li H,Teng Y,Kang Y

更新日期：2015-01-01 00:00:00

abstract：BACKGROUND:Introduction of a new generation of artificial ligaments for ACL reconstruction, the Ligament Augmentation and Reconstruction System (LARS), gives promising clinical results [1]. The current literature supports the use of LARS from short to medium term. To go even further to improve the biocompatibility of t...

journal_title：Bio-medical materials and engineering

authors： Lessim S,Migonney V,Thoreux P,Lutomski D,Changotade S

更新日期：2013-01-01 00:00:00

abstract：:This work evaluated the effects of UV irradiation, plasma radiation, steam and 70% ethanol treatments on the sterilization and integrity of auto-crosslinked hyaluronic acid (HA-ACP) scaffolds structured in microparticles and sponges aiming in vivo applications for regenerative medicine of bone tissue. The integrity of...

journal_title：Bio-medical materials and engineering

authors： Shimojo AA,de Souza Brissac IC,Pina LM,Lambert CS,Santana MH

更新日期：2015-01-01 00:00:00

abstract：OBJECTIVE:To study the comprehensive biomechanical properties of the cancellous bone of distal femur through a series of mechanical tests, and provide relevant subjects with the basic technical data. BACKGROUND:The study on bone mechanics is a commonly used approach to evaluate the biomechanical competency of bone. Th...

journal_title：Bio-medical materials and engineering

authors： Du C,Ma H,Ruo M,Zhang Z,Yu X,Zeng Y

更新日期：2006-01-01 00:00:00

abstract：:Commercially pure titanium (CPT) substrate was subjected to porcelain firing and bond strengths under three-point bending mode (span length: 15 mm; crosshead speed: 0.5 mm/min) were evaluated. Experimental variables included surface treatments of CPT and porcelain firing schedules. Variables for the surface treatments...

journal_title：Bio-medical materials and engineering

authors： Oshida Y,Fung LW,Isikbay SC

更新日期：1997-01-01 00:00:00

abstract：:To select tag single nucleotide polymorphisms (SNPs) within and around human p75 neurotrophin receptor (p75NTR) gene in Chinese Han population, the sequence involving p75NTR gene as well as the upstream and downstream of the gene was identified according to the data from National Center for Biotechnology Information (...

journal_title：Bio-medical materials and engineering

authors： Wang YT,Lu XM,Shu YH,Xiao L,Chen KT

更新日期：2014-01-01 00:00:00

abstract：:A size-based blood cell sorting model with a micro-fence structure is proposed in the frame of immersed boundary and lattice Boltzmann method (IB-LBM). The fluid dynamics is obtained by solving the discrete lattice Boltzmann equation, and the cells motion and deformation are handled by the immersed boundary method. A ...

journal_title：Bio-medical materials and engineering

authors： Wei Q,Xu YQ,Tian FB,Gao TX,Tang XY,Zu WH

更新日期：2014-01-01 00:00:00

abstract：:A driver's response to a front-coming vehicle collision consists of braking reaction time and braking behavior. The purpose was to investigate drivers' responses at different speeds, relative distances, and particularly the behavior on the accelerator at the collision moment. Twelve young men participated in driving s...

journal_title：Bio-medical materials and engineering

authors： Gao Z,Li C,Hu H,Zhao H,Chen C,Yu H

更新日期：2015-01-01 00:00:00

abstract：:The interaction between implant materials and bone cells or oral epithelial (OE) cells contributes to the clinical success of dental implants. The functional activity of cells in contact with an implant is determined by its surface properties. Before cells attach, extracellular matrix (ECM) in the serum deposits on th...

journal_title：Bio-medical materials and engineering

authors： Goto T,Yoshinari M,Kobayashi S,Tanaka T

更新日期：2004-01-01 00:00:00

abstract：BACKGROUND:Age is the most important risk factor for primary osteoarthritis (OA). Members of the TGF-β superfamily play a crucial role in chondrocyte differentiation and maintenance of healthy articular cartilage. OBJECTIVE:We have investigated whether age-related changes in TGF-β superfamily signaling components play...

journal_title：Bio-medical materials and engineering

authors： van der Kraan PM

更新日期：2014-01-01 00:00:00

abstract：:Most drug delivery systems as treatment modalities for osteomyelitis have not been evaluated for resistant infections. Tigecycline (TG) is an antimicrobial agent that could be used in the treatment of multi-drug-resistant orthopedic infections. The objective of this in vitro study has been to determine what dosage of ...

journal_title：Bio-medical materials and engineering

authors： Ignjatović NL,Ninkov P,Sabetrasekh R,Lyngstadaas SP,Uskoković DP

更新日期：2014-01-01 00:00:00

abstract：:The balance between extracellular inorganic phosphate (ePi) and extracellular inorganic pyrophosphate (ePPi) is controlled by four membrane proteins: the transporters ANK (exporting PPi outside the cells) and PiT-1 (importing ePi into the cells), and the enzymes PC-1 (generating ePPi from nucleotides) and Tissue Non-s...

journal_title：Bio-medical materials and engineering

authors： Hamade T,Bianchi A,Sebillaud S,Netter P,Jouzeau JY,Cailotto F

更新日期：2010-01-01 00:00:00

abstract：:Currently, clinicians face choices of restoration including amalgams (mercury-based, gallium-based alloys, or mercury-free silver-based substitutes), composite resins, ceramics, and gold alloy. In order to choose an appropriate restorative material, many parameters are involved; they include preparation time requireme...

journal_title：Bio-medical materials and engineering

authors： Miyazaki M,Oshida Y,Xirouchaki L

更新日期：1996-01-01 00:00:00

abstract：BACKGROUND:Great potential of cellular therapies has generated extensive research in the field of cells harvesting and culturing. Transplantation of cell cultures has been used in a variety of therapeutic programs but in many cases it appeared that biomaterial scaffold or sheath would enhance cells regenerative potenti...

journal_title：Bio-medical materials and engineering

authors： Marycz K,Szarek D,Grzesiak J,Wrzeszcz K

更新日期：2014-01-01 00:00:00

abstract：BACKGROUND:Stenting has been proposed as an effective treatment to restore blood flow in obstructed arteries by plaques. Although several modified designs for stents have been suggested, most designs have the risk of disturbing blood flow. OBJECTIVE:The main objective is to propose a stent design to attain a uniform l...

journal_title：Bio-medical materials and engineering

authors： Beigzadeh B,Mirmohammadi SA,Ayatollahi MR

更新日期：2017-01-01 00:00:00

abstract：:Shape memory alloys (SMA) are being increasingly used in various industrial applications as actuators, connectors, or damping materials. In the medical field, superelastic devices such as eyeglass frames, stents or guide catheters have come to market in the recent years. The design of SMA devices has usually been base...

journal_title：Bio-medical materials and engineering

authors： Trochu F,Brailovski V,Meunier MA,Terriault P,Qian YY

更新日期：1996-01-01 00:00:00

abstract：:Hydroxyapatite is widely utilized as a component in dental hygiene agents. The ability to adsorb and remove dental plaque adhering to tooth surfaces is recognized as an important property of hydroxyapatite particles. In this study, the adsorptive ability of hydroxyapatite was evaluated based on its adsorptive amount a...

journal_title：Bio-medical materials and engineering

authors： Niwa M,Li W,Sato T,Daisaku T,Aoki H,Aoki H

更新日期：1999-01-01 00:00:00

abstract：:DMPC and DSPC liposomes were prepared via thin film hydration method followed by sonication. Propranolol solution was incorporated into liposomes at hydration stage. TEM images showed the sizes of DSPC and DMPC were around 88 and 137 nm, respectively. The highest encapsulation ratio of propranolol was approximately 70...

journal_title：Bio-medical materials and engineering

authors： Teong B,Kuo SM,Chen CH,Chen YK,Cheng ZJ,Huang HH

更新日期：2014-01-01 00:00:00

abstract：:Electroencephalograph (EEG) signals feature extraction and processing is one of the most difficult and important part in the brain-computer interface (BCI) research field. EEG signals are generally unstable, complex and have low signal-noise ratio, which is difficult to be analyzed and processed. To solve this problem...

journal_title：Bio-medical materials and engineering

authors： Wei Y,Jun Y,Lin S,Hong L

更新日期：2014-01-01 00:00:00

abstract：:Gabexate mesilate is a non-peptide protease inhibitor, developed in Japan, which is used in the treatment of acute pancreatitis and disseminated intravascular coagulation. This compound is readily hydrolyzed as it has ester bonds in its structure. It is now out of patent in Japan and there are many generic versions on...

journal_title：Bio-medical materials and engineering

authors： Sakurai M,Abe H,Okamura N,Inoue Y,Akiyoshi T,Matsuyama K,Uchida T,Otsuka M

更新日期：2010-01-01 00:00:00

abstract：OBJECTIVES:to assess reliability and reproducibility of quantitative MRI (7 T) in assessing rat femoro-tibial cartilage volume. METHODS:5 healthy rat knees were scanned in vivo using a 7 T experimental imager. Sagittal high resolution 3D Gradient Echo with fat suppression sequences were performed with a dedicated home...

journal_title：Bio-medical materials and engineering

authors： Goebel JC,Bolbos R,Pinzano A,Schaeffer M,Rengle A,Galois L,Etienne S,Netter P,Loeuille D,Beuf O,Gillet P

更新日期：2008-01-01 00:00:00

abstract：:Microarray data has small samples and high dimension, and it contains a significant amount of irrelevant and redundant genes. This paper proposes a hybrid ensemble method based on double disturbance to improve classification performance. Firstly, original genes are ranked through reliefF algorithm and part of the gene...

journal_title：Bio-medical materials and engineering

authors： Chen T,Xue H,Hong Z,Cui M,Zhao H

更新日期：2015-01-01 00:00:00

abstract：:As an injectable scaffold material for bone tissue engineering, calcium phosphate cement (CPC) has good biocompatibility, self-setting, and osteoconduction properties. Alginate-microencapsulated seed cells can pick up the degradation speed and bioactivity of CPC. The aim of this study was to explore the osteogenic abi...

journal_title：Bio-medical materials and engineering

authors： Wang J,Qiao P,Dong L,Li F,Xu T,Xie Q

更新日期：2014-01-01 00:00:00

abstract：BACKGROUND:Electrospinning is a highly effective method in order to generate nano-scaled fibers. In conventional electrospinning technique, geometry of nanofibers are mostly random due to the chaotic behavior of polymer jet. OBJECTIVE:Purpose of this study is to produce aligned nanofibers from PVP polymers with advanc...

journal_title：Bio-medical materials and engineering

authors： Karayeğen G,Koçum IC,Çökeli Ler Serdaroğlu D,Doğan M

更新日期：2018-01-01 00:00:00

abstract：:NiTi alloy used in dental prosthetic fixators shows pseudoelastic behaviour and exhibits a great potential in dental and orthopaedic applications where constant correcting loads are required. In order to use such materials in dental prosthetic fixators, where the device is cyclically deformed, it is necessary to inves...

journal_title：Bio-medical materials and engineering

authors： Sabrià J,Cortada M,Giner L,Gil FJ,Fernández E,Manero JM,Planell JA

更新日期：1996-01-01 00:00:00

abstract：:The frequent occurrence of breast cancer and its serious consequences have attracted worldwide attention in recent years. Problems such as low rate of accuracy and poor self-adaptability still exist in traditional diagnosis. In order to solve these problems, an AdaBoost-SVM classification algorithm, combined with the ...

journal_title：Bio-medical materials and engineering

authors： Li P,Bi T,Huang J,Li S

更新日期：2014-01-01 00:00:00

abstract：:Longitudinal stent compression (LSC) is a new failure mode not previously observed in coronary stents. This phenomenon occurs when the physician tries to cross the deployed stent with other devices. While this phenomenon has been observed with a number of stent designs, it seems more common with the Element stent. A c...

journal_title：Bio-medical materials and engineering

authors： Hsiao HM,Yeh CT,Chiu YH,Wang C,Chen CP

更新日期：2014-01-01 00:00:00

abstract：:Hydroxyapatite has been rubbed against ultra-high-molecular-weight-polyethylene (UHMWPE) under calcium-containg aqueous solutions. Further, hardness tests were carried out in air and in calcium-containing solutions whose pH ranged from pH 5 to pH 9. Hardness was found to vary with pH with a peak at around pH 7, i.e. -...

journal_title：Bio-medical materials and engineering

authors： Mazeau G,Czernuszka JT

更新日期：2001-01-01 00:00:00

abstract：:To obtain an appropriate model for the simulation of the biomechanical behavior of brain tissue and the deformation of ventricles, in particular, we have developed a novel computerized plain strain finite element model. For optimum results, a multiple loading solutions approach using various tissue parameters for the ...

journal_title：Bio-medical materials and engineering

authors： Farmanzad F,Najarian S,Eslamee MR,Seddighi AS

更新日期：2007-01-01 00:00:00

abstract：:The 5(and 6)-carboxyfluorescein diacetate (C-FDA) is used for a rapid and continuous counting of living cells. Nonfluorescent C-FDA is converted into fluorescent 5(and 6)-carboxyfluorescein (C-F) by the reaction with esterase, which is an enzyme of living cells. The conversion makes it possible to count the number of ...

journal_title：Bio-medical materials and engineering

authors： Sugata K,Ohnishi T,Matsumoto K

更新日期：1991-01-01 00:00:00