Breast cancer early diagnosis based on hybrid strategy.

abstract：:To evaluate the deterioration in the superelasticity of Ti-coated NiTi orthodontic wires, titanium was coated onto wires to form a 1-microm thick film using radio frequency magnetron sputtering. In superelasticity cycle tests, the sigma5.0 value (the stress at 5.0% strain) of a Ti-coated wire was lower than that of a ...

journal_title：Bio-medical materials and engineering

authors： Ozeki K,Yuhta T,Aoki H,Asaoka T,Daisaku T,Fukui Y

更新日期：2003-01-01 00:00:00

abstract：:In recent years, there is an increasing utilization and demand to use magnetic fields in bioengineering applications due to its beneficial effects. Although in the last decade more attention has been given by tribologists to the electromagnetic processes taking place between sliding surfaces, which influence the tribo...

journal_title：Bio-medical materials and engineering

authors： Zaki M,Aljinaidi A,Hamed M

更新日期：2003-01-01 00:00:00

abstract：:In this study, design optimization of a tooth implant-supported fixed prosthesis was investigated theoretically. A three-dimensional finite element analysis was utilized to simulate the stress distribution and deformation, with an emphasis on the material selection for various parts of the prosthesis. This mandibular ...

journal_title：Bio-medical materials and engineering

authors： Dargahi J,Najarian S,Talebi M

更新日期：2005-01-01 00:00:00

abstract：:Previous literatures have indicated that hypothalamic paraventricular nucleus (PVN) neurons are important for regulating the level of sympathetic and vagal nervous activity. Sympathovagal balance is closely related to heart rate variability (HRV). However, it still requires further elucidation regarding the effect of ...

journal_title：Bio-medical materials and engineering

authors： Deng X,Feng X,Li S,Gao Y,Yu B,Li G

更新日期：2015-01-01 00:00:00

abstract：:A robust method for inducing bone-formation without an autograft has not been established. Currently, both platelet-rich plasma (PRP) and bone morphogenetic protein (BMP) have been widely investigated for their clinical use in such cases. However, their synergistic effect is still controversial and previously shown di...

journal_title：Bio-medical materials and engineering

authors： Yoshida K,Sumita Y,Marukawa E,Harashima M,Asahina I

更新日期：2013-01-01 00:00:00

abstract：:The present review surveys studies on physical-chemical properties and biological response of living tissues to NiTi (Nitinol) carried out recently, aiming at an understanding of the place of this material among the implant alloys in use. Advantages of shape memory and superelasticity are analyzed in respect to functi...

journal_title：Bio-medical materials and engineering

authors： Shabalovskaya SA

更新日期：2002-01-01 00:00:00

abstract：:The effect of carbonate in reducing the crystal size of precipitated hydroxyapatite by approximately an order of magnitude has not been used previously in the preparation of gel monoliths for the fabrication of carbonate hydroxyapatite ceramics. The aim of this study was to devise a method whereby gel monoliths of car...

journal_title：Bio-medical materials and engineering

authors： Barralet JE,Best SM,Bonfield W

更新日期：1996-01-01 00:00:00

abstract：:Stroke is a major cause of death and disability throughout the world. Subtotal occlusion of the carotid artery is an important risk factor for stroke. Carotid artery stenting (CAS) is increasingly being used for treatment of carotid artery stenosis. There are many reports on treating carotid artery stenosis by CAS; ho...

journal_title：Bio-medical materials and engineering

authors： Zhang C,Wang Z,Zheng H,Qiu Y,He X,Yang H,Liu W

更新日期：2012-01-01 00:00:00

abstract：:In order to explore the effects of hydrogen sulfide (H2S) on myocardial fibrosis in diabetic rats and its underlying mechanisms, intraperitoneal injections of streptozotocin were used to establish the diabetes models and sodium hydrosulfide (NaHS) was used as an exogenous donor of H2S. Eight weeks later, Van Gieson st...

journal_title：Bio-medical materials and engineering

authors： Xiao T,Zeng O,Luo J,Wu Z,Li F,Yang J

更新日期：2015-01-01 00:00:00

abstract：:A surface plasmon resonance (SPR)-based biosensor was developed for specific detection of nine common respiratory virus, including influenza A and influenza B, H1N1, respiratory syncytial virus (RSV), parainfluenza virus 1-3 (PIV1, 2, 3), adenovirus, and severe acute respiratory syndrome coronavirus (SARS). The SPR bi...

journal_title：Bio-medical materials and engineering

authors： Shi L,Sun Q,He J,Xu H,Liu C,Zhao C,Xu Y,Wu C,Xiang J,Gu D,Long J,Lan H

更新日期：2015-01-01 00:00:00

abstract：:Skilled behavior is difficult or impossible to articulate explicitly by the performers. Likewise biomechanical models of skilled motor actions are often limited by the lack of knowledge of the underlying mechanisms. A 'behavioral cloning' technique is described, based on a trained artificial neural network (ANN), that...

journal_title：Bio-medical materials and engineering

authors： Andrews BJ,Davoodi R,Kamnik R,Bajd T

更新日期：1998-01-01 00:00:00

abstract：:A number of materials have been considered as sources of grafts to repair bone defects. Here, we examined the possibility of creating in situ-forming gels from sodium carboxymethylcellulose (CMC) and poly(ethyleneimine) (PEI) for use as an in vivo carrier of demineralized bone matrix (DBM). The interaction between ani...

journal_title：Bio-medical materials and engineering

authors： Kim KS,Kang YM,Lee JY,Kim ES,Kim CH,Min BH,Lee HB,Kim JH,Kim MS

更新日期：2009-01-01 00:00:00

abstract：:Porous polyethylene (PP or Medpor) is an alloplastic material worldwide used for craniofacial reconstruction. Although several clinical studies are available, there is a lack as regard the genetic effects. Because PP is always fixed on bone and the mechanism by which PP acts on osteoblasts is unknown, we therefore att...

journal_title：Bio-medical materials and engineering

authors： Palmieri A,Pezzetti F,Brunelli G,Martinelli M,Scapoli L,Arlotti M,Masiero E,Carinci F

更新日期：2008-01-01 00:00:00

abstract：:Longitudinal stent compression (LSC) is a new failure mode not previously observed in coronary stents. This phenomenon occurs when the physician tries to cross the deployed stent with other devices. While this phenomenon has been observed with a number of stent designs, it seems more common with the Element stent. A c...

journal_title：Bio-medical materials and engineering

authors： Hsiao HM,Yeh CT,Chiu YH,Wang C,Chen CP

更新日期：2014-01-01 00:00:00

abstract：:In this study, a computer-aided detection (CAD) system was developed for the detection of lung nodules in computed tomography images. The CAD system consists of four phases, including two-dimensional and three-dimensional preprocessing phases. In the feature extraction phase, four different groups of features are extr...

journal_title：Bio-medical materials and engineering

authors： Demir Ö,Yılmaz Çamurcu A

更新日期：2015-01-01 00:00:00

abstract：:In this work, we present an evolutive trabecular model for bone remodeling based on a boundary detection algorithm accounting for both biology and applied mechanical forces, known to be an important factor in bone evolution. A finite element (FE) numerical model using the Abaqus/Standard® software was used with a UMAT...

journal_title：Bio-medical materials and engineering

authors： Spingarn C,Wagner D,Rémond Y,George D

更新日期：2017-01-01 00:00:00

abstract：:Poly(propylene fumarate-co-ethylene glycol) random (PPF-1) and block (PPF-2) copolymer oligomers were prepared. Comparing the setting characteristics of PPF-1 and PPF-2 with comonomer n-vinyl pyrrolidone (n-VP) and swelling characteristics of cured PPF-1 and PPF-2, lower setting temperature and setting time was observ...

journal_title：Bio-medical materials and engineering

authors： Jayabalan M,Thomas V,Sreelatha PK

更新日期：2000-01-01 00:00:00

abstract：:Hydroxyapatite has been rubbed against ultra-high-molecular-weight-polyethylene (UHMWPE) under calcium-containg aqueous solutions. Further, hardness tests were carried out in air and in calcium-containing solutions whose pH ranged from pH 5 to pH 9. Hardness was found to vary with pH with a peak at around pH 7, i.e. -...

journal_title：Bio-medical materials and engineering

authors： Mazeau G,Czernuszka JT

更新日期：2001-01-01 00:00:00

abstract：:Magnesium has attracted a lot of attention as a new class of biodegradable material. The surface properties of magnesium in simulated body fluid (SBF) were investigated in the current research work. Cast magnesium samples with different surface characteristics were prepared which were then placed in SBF for 2, 4 and 8...

journal_title：Bio-medical materials and engineering

authors： Sana A,Malik I,Mujahid M,Akram MA,Adeel Umer M

更新日期：2019-01-01 00:00:00

abstract：:Hydroxyapatite was coated with 1 microm thickness on titanium columns of a length of 10 mm, an outer diameter of 4.0 mm by radio frequency magnetron sputtering. The hydroxyapatite coating titanium columns were implanted in the diaphysis of femora of 3 adult dogs, and push-out test was carried out after 2, 4 and 12 wee...

journal_title：Bio-medical materials and engineering

authors： Ozeki K,Yuhta T,Aoki H,Nishimura I,Fukui Y

更新日期：2001-01-01 00:00:00

abstract：:The finite element (FE) method has been widely used to investigate the mechanism of traumatic brain injuries (TBIs), because it is technically difficult to quantify the responses of the brain tissues to the impact in experiments. One of technical challenges to build a FE model of a human head is the modeling of the ce...

journal_title：Bio-medical materials and engineering

authors： Wu JZ,Pan CS,Wimer BM,Rosen CL

更新日期：2017-01-01 00:00:00

abstract：:Low-dose computed tomography reconstruction is an important issue in the medical imaging domain. Sparse-view has been widely studied as a potential strategy. Compressed sensing (CS) method has shown great potential to reconstruct high-quality CT images from sparse-view projection data. Nonetheless, low-contrast struct...

journal_title：Bio-medical materials and engineering

authors： Qi H,Chen Z,Guo J,Zhou L

更新日期：2015-01-01 00:00:00

abstract：:Recent advances of fundamental research on the in vitro generation of red blood cells (RBCs) from hematopoietic stem cells in the laboratory open new possibilities of the utilization of cultured RBCs in transfusion medicine. We study the economic challenge of the setup and development of the mass industrial production...

journal_title：Bio-medical materials and engineering

authors： Mercier Ythier J

更新日期：2015-01-01 00:00:00

abstract：:The in vivo and in vitro drug release profiles from a self-setting bioactive CaO-SiO2-P2O5 glass bone cement containing indomethacin as a model drug were investigated. The cement containing 2% and 5% indomethacin (IMC) powder hardened within 5 min after mixing with ammonium phosphate buffer. After setting, in vitro dr...

journal_title：Bio-medical materials and engineering

authors： Otsuka M,Nakahigashi Y,Matsuda Y,Kokubo T,Yoshihara S,Fujita H,Nakamura T

更新日期：1997-01-01 00:00:00

abstract：:Recognition of lung cancer cells is very important to the clinical diagnosis of lung cancer. In this paper we present a novel method to extract the structure characteristics of lung cancer cells and automatically recognize their types. Firstly soft mathematical morphology methods are used to enhance the grayscale imag...

journal_title：Bio-medical materials and engineering

authors： Chen YC,Hu KH,Li FZ,Li SY,Su WF,Huang ZY,Hu YX

更新日期：2006-01-01 00:00:00

abstract：:Currently, clinicians face choices of restoration including amalgams (mercury-based, gallium-based alloys, or mercury-free silver-based substitutes), composite resins, ceramics, and gold alloy. In order to choose an appropriate restorative material, many parameters are involved; they include preparation time requireme...

journal_title：Bio-medical materials and engineering

authors： Miyazaki M,Oshida Y,Xirouchaki L

更新日期：1996-01-01 00:00:00

abstract：:The goal of the study was to determine material constants of cancellous tissue in a compression test taking into account stress-strain characteristics. The nineteen test samples were resected from a femoral head of a patient qualified for a hip replacement surgery. During the compression tests, load-displacement curve...

journal_title：Bio-medical materials and engineering

authors： Kokot G,Makuch A,Skalski K,Bańczerowski J

更新日期：2018-01-01 00:00:00

abstract：BACKGROUND:Physical activity plays a tremendous role in determining bone mechanical behavior, which is superimposed to gravidity. OBJECTIVE:Compare the geometric and material responses of the rat femur to a high intensity treadmill running training of a relatively short duration, as assessed by 3-point mechanical test...

journal_title：Bio-medical materials and engineering

authors： Bozzini C,Viscor G,Kristjánsson JCR,Picasso E,Champin G,Alippi RM,Bozzini CE

更新日期：2017-01-01 00:00:00

abstract：:Some computer applications for cell characterization in medicine and biology, such as analysis of surface structure of cell wall-deficient EVC (El Tor Vibrio of Cholera), operate with cell samples taken from very small areas of interest. In order to perform texture characterization in such an application, only a few t...

journal_title：Bio-medical materials and engineering

authors： Li S,Hu K,Cai N,Su W,Xiong H,Lou Z,Lin T,Hu Y

更新日期：2001-01-01 00:00:00

abstract：:This study investigates the radiation safety of a newly designed magnetic induction sensor. This novel magnetic induction sensor uses a two-arm Archimedean spiral coil (TAASC) as the exciter. A human head model with a real anatomical structure was used to calculate the specific absorption rate (SAR) and temperature ch...

journal_title：Bio-medical materials and engineering

authors： Zhang Z,Liu P,Zhou D,Zhang L,Ding L

更新日期：2015-01-01 00:00:00