Abstract:
:Poly(propylene fumarate-co-ethylene glycol) random (PPF-1) and block (PPF-2) copolymer oligomers were prepared. Comparing the setting characteristics of PPF-1 and PPF-2 with comonomer n-vinyl pyrrolidone (n-VP) and swelling characteristics of cured PPF-1 and PPF-2, lower setting temperature and setting time was observed with the former leading to higher swelling coefficient and lower cross link density in the cured PPF-1. Due to the high swelling coefficient and low setting exothermic temperature associated with PPF-1, the bone cement was prepared from PPF-1, n-VP and hydroxyapatite (HAP). The in vitro degradation studies reveal lesser weight loss and deformation of PPF-1/n-VP/HAP based cured resin in Ringer's solution and phosphate buffered saline in comparison with that of PPF-1/n-VP cured resin. Though the bone cement composite has adequate mechanical properties with HAP, the compressive strength and modulus of the composite aged in Ringer's solution and PBS reduced appreciably which is due to extensive hydration and plasticization by the PEG unit. However, the bone-binding and bond strength of the bone cement determined as the load for separation of bones was found to be similar to that of fast setting calcium phosphate-atelocollagen (5%) bone cement. The bone cement PPF-1/n-VP/HAP could be used as scaffold for correcting the bone defects.
journal_name
Biomed Mater Engjournal_title
Bio-medical materials and engineeringauthors
Jayabalan M,Thomas V,Sreelatha PKsubject
Has Abstractpub_date
2000-01-01 00:00:00pages
57-71issue
2eissn
0959-2989issn
1878-3619journal_volume
10pub_type
杂志文章abstract::As an injectable scaffold material for bone tissue engineering, calcium phosphate cement (CPC) has good biocompatibility, self-setting, and osteoconduction properties. Alginate-microencapsulated seed cells can pick up the degradation speed and bioactivity of CPC. The aim of this study was to explore the osteogenic abi...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-130875
更新日期:2014-01-01 00:00:00
abstract::The aim of this work was to investigate the effect of 2.4 MeV proton irradiation on the dielectric property of polyethylene terephthalate (PET) microfibre nondestructively. The dielectric constant εd of single-microfibre has been measured as-such applying laser diffraction technique. Applying this methodology εd is fo...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-130947
更新日期:2014-01-01 00:00:00
abstract::In recent years, there is an increasing utilization and demand to use magnetic fields in bioengineering applications due to its beneficial effects. Although in the last decade more attention has been given by tribologists to the electromagnetic processes taking place between sliding surfaces, which influence the tribo...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2003-01-01 00:00:00
abstract::The thrust of the present work is the demonstration of the feasibility of using an enzyme-linked immunosorbent assay (ELISA) for the detection and quantification of a monoclonal antibody human serum. The antibodies used, 7E3 and D3GP3, have been proposed as platelet receptor blockers, being directed specifically again...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1994-01-01 00:00:00
abstract::Crystalline hydroxyapatite (HA) powder was coated on titanium substrate by radio frequency (RF) magnetron sputtering. The coating was homogeneous thin film and the thickness was 1microm. Crystallinity of the HA coating was low and Ca/P ratio was high as 3.0. Particle sizes were 40 to approximately 100 nm, and the crys...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2000-01-01 00:00:00
abstract::To select tag single nucleotide polymorphisms (SNPs) within and around human p75 neurotrophin receptor (p75NTR) gene in Chinese Han population, the sequence involving p75NTR gene as well as the upstream and downstream of the gene was identified according to the data from National Center for Biotechnology Information (...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-141213
更新日期:2014-01-01 00:00:00
abstract:BACKGROUND:Access to peripheral veins is necessary for sample collection, transfusion and infusion of fluids or medications. The peripheral intravenous catheterization (PIVC) procedure is the introduction of a short catheter into a peripheral vein and can be problematic, leading to multiple failed attempts. PURPOSE:To...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章,评审
doi:10.3233/BME-120735
更新日期:2013-01-01 00:00:00
abstract::High order partial least squares (HOPLS) is a novel data processing method. It is highly suitable for building prediction model which has tensor input and output. The objective of this study is to build a prediction model of the relationship between sinoatrial node field potential and high glucose using HOPLS. The thr...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151482
更新日期:2015-01-01 00:00:00
abstract::Reoperation of aldehyde tanned bioprotheses due to calcific degeneration remains their major drawback. Based on experiments studying mechanisms and factors that influence the time phase, extent and progression of calcification and evaluating the efficiency of anticalcification treatments and the effects of surface see...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2004-01-01 00:00:00
abstract::Two different types of colloidal lipid particles are presented and compared as innovative carrier systems. Size distribution and storage stability of formulations produced by hot high pressure homogenisation in lab and medium scale production were investigated by laser diffractometry (LD) and photon correlation spectr...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2005-01-01 00:00:00
abstract:BACKGROUND:Stenting has been proposed as an effective treatment to restore blood flow in obstructed arteries by plaques. Although several modified designs for stents have been suggested, most designs have the risk of disturbing blood flow. OBJECTIVE:The main objective is to propose a stent design to attain a uniform l...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-171691
更新日期:2017-01-01 00:00:00
abstract::The mechanical behavior of three styrenic thermoplastic block copolymer elastomers with applied surgical sutures was studied by uniaxial tensile testing. The materials exhibited oriented cylindrical microstructure. Distinct macroscopic deformation mechanisms have been observed upon stretching of samples with vertical ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-130843
更新日期:2014-01-01 00:00:00
abstract:BACKGROUND:Physical activity plays a tremendous role in determining bone mechanical behavior, which is superimposed to gravidity. OBJECTIVE:Compare the geometric and material responses of the rat femur to a high intensity treadmill running training of a relatively short duration, as assessed by 3-point mechanical test...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-171684
更新日期:2017-01-01 00:00:00
abstract::Currently, clinicians face choices of restoration including amalgams (mercury-based, gallium-based alloys, or mercury-free silver-based substitutes), composite resins, ceramics, and gold alloy. In order to choose an appropriate restorative material, many parameters are involved; they include preparation time requireme...
journal_title:Bio-medical materials and engineering
pub_type: 历史文章,杂志文章,评审
doi:
更新日期:1996-01-01 00:00:00
abstract::Intraocular lenses (IOL) made of polymethyl methacrylate (PMMA) lack an important yellowish pigment useful as a filter in the visual process and in the protection of the retina from short wavelength light. It was found that the PMMA used for IOL manufacturing can be tinted by dry exposure to mercury near-UV emitting l...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1994-01-01 00:00:00
abstract::In this study, biocompatibility of 17-4 PH stainless steel foam for biomedical implant applications was investigated. 17-4 PH stainless steel foams having porosities in the range of 40-82% with an average pore size of around 600 μm were produced by space holder-sintering technique. Sintered foams were precipitation ha...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-2011-0671
更新日期:2011-01-01 00:00:00
abstract::Microarray data has small samples and high dimension, and it contains a significant amount of irrelevant and redundant genes. This paper proposes a hybrid ensemble method based on double disturbance to improve classification performance. Firstly, original genes are ranked through reliefF algorithm and part of the gene...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151499
更新日期:2015-01-01 00:00:00
abstract::This study presents a novel spatial registration method of Image-guided neurosurgery system (IGNS) based on stereo-vision. Images of the patient's head are captured by a video camera, which is calibrated and tracked by an optical tracking system. Then, a set of sparse facial data points are reconstructed from them by ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151391
更新日期:2015-01-01 00:00:00
abstract:BACKGROUND:Cuff electrodes have been widely used chronically in different clinical applications. Advancements have been made in selective stimulation by using multi-contact cuff electrodes. Steering anodic current is a strategy to increase selectivity by reshaping and localizing electric fields. There are two configura...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151281
更新日期:2015-01-01 00:00:00
abstract::The first metatarsophalangeal (MTP) joint is a critical component for normal walking. The present study aimed to investigate the effects of restricting the flexion-extension motion of the first MTP joint on human walking gait. Ten male participants were recruited to perform walking trials under barefoot (BF) and the f...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-141073
更新日期:2014-01-01 00:00:00
abstract:BACKGROUND:Adipose tissue engineering has been studied as an alternative to current options for breast reconstruction, such as lipofilling, flap reconstruction, and silicone implants. Previously, we demonstrated that a poly(L-lactic acid) mesh containing a collagen sponge, containing neither cells nor growth factors, c...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-201103
更新日期:2020-01-01 00:00:00
abstract::A novel technique and product for carpal tunnel microscopic surgical procedures using a modified medical device containing a head as a surgical scalpel under light guidance were designed and studied. The novel design of the medical device was developed and applied in a new carpal tunnel microscopic surgical procedure ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151303
更新日期:2015-01-01 00:00:00
abstract::Gabexate mesilate is a non-peptide protease inhibitor, developed in Japan, which is used in the treatment of acute pancreatitis and disseminated intravascular coagulation. This compound is readily hydrolyzed as it has ester bonds in its structure. It is now out of patent in Japan and there are many generic versions on...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-2010-0611
更新日期:2010-01-01 00:00:00
abstract::Recognition of lung cancer cells is very important to the clinical diagnosis of lung cancer. In this paper we present a novel method to extract the structure characteristics of lung cancer cells and automatically recognize their types. Firstly soft mathematical morphology methods are used to enhance the grayscale imag...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2006-01-01 00:00:00
abstract::Three patterned systems aiming at the control of mammalian cell behavior are presented. The determinant feature common to these systems is the spatial distribution of extracellular matrix (ECM) proteins (mainly collagen) on polymer substrates. This distribution differs from one system to another with respect to the sc...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2004-01-01 00:00:00
abstract::To evaluate the deterioration in the superelasticity of Ti-coated NiTi orthodontic wires, titanium was coated onto wires to form a 1-microm thick film using radio frequency magnetron sputtering. In superelasticity cycle tests, the sigma5.0 value (the stress at 5.0% strain) of a Ti-coated wire was lower than that of a ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2003-01-01 00:00:00
abstract::Using a wet method, we have synthesized octacalcium phosphate carbonate, in which HPO42- in octacalcium phosphate is replaced with CO32-. The physical, crystal, and chemical properties of this new material were compared to octacalcium phosphate, Ca-deficient hydroxyapatite, and Ca-deficient carbonate apatite using X-r...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-171651
更新日期:2017-01-01 00:00:00
abstract::The fretting corrosion of five materials for implant suprastructures (cast-titanium, machined-titanium, gold alloy, silver-palladium alloy and chromium-nickel alloy), was investigated in vitro, the materials being galvanically coupled to a titanium ball-and-socket-joint with tetrafluoroethylene under mechanical load. ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2003-01-01 00:00:00
abstract:OBJECTIVE:Normal pregnancy is associated with profound alterations in the maternal cardiovascular system and PPG represents a sensitive and convenient technique capable of tracking changes in the pulsatile function of arteries. The aim of this study was to investigate the effects of maternal cardiovascular alterations ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-130801
更新日期:2014-01-01 00:00:00
abstract::We have developed a novel multicomponent nano-hydroxyapatite-poly(D,L-lactide-co-glycolide)-collagen biomaterial (nHAP-PLGA-collagen) with mechanical properties similar to human cancellous bone. To demonstrate the bone forming capacity of nHAP-PLGA-collagen prior to in vivo experiments, nHAP-PLGA-collagen films and 3D...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-171703
更新日期:2017-01-01 00:00:00