The mechanical-chemical attachment between the artificial articular cartilage (PVA-hydrogel) and metal substrate (or underlying bone).

abstract：:Hyaluronic acid (HA) was used as an internal phase additive to improve the loading efficiency of ofloxacin, a hydrophilic drug encapsulated by hydrophobic polylactic-co-glycolic acid (PLGA) materials, through a double emulsion (water-in-oil-in-water) solvent extraction/evaporation method. Results from laser distributi...

journal_title：Bio-medical materials and engineering

authors： Wu G,Chen L,Li H,Wang YJ

更新日期：2014-01-01 00:00:00

abstract：:The interactions between carbon nanotubes and important biomolecules, above all collagen molecules, have not been studied in detail. This situation is partly due to the fact that CNT are solid entities, while most of the biomolecules can be prepared in solution. We used turbidity as a means of evaluating the interacti...

journal_title：Bio-medical materials and engineering

authors： Kuboki Y,Terada M,Kitagawa Y,Abe S,Uo M,Watari F

更新日期：2009-01-01 00:00:00

abstract：:The effect of hydroxyapatite sol (HAm) which is composed of unheating hydroxyapatite microcrystal particle on cell proliferation and alkaline phophatase activity in osteoblastic MC3T3-E1 cells, was examined in the presence or absence of fetal calfe serum (FCS) in the medium. In the absence of FCS, HAm inhibited the ce...

journal_title：Bio-medical materials and engineering

authors： Iwakami T,Imai T

更新日期：2002-01-01 00:00:00

abstract：:Dry emulsion containing curcumin (DE-CUR) was prepared for oral delivery of poorly water-soluble curcumin, and its oral bioavailability and antiasthmatic efficacy was evaluated. After comparison of the solubility of curcumin in various oils, Plurol® Oleique CC497 was selected to be the oil phase due to its higher solu...

journal_title：Bio-medical materials and engineering

authors： Jang DJ,Kim ST,Oh E,Lee K

更新日期：2014-01-01 00:00:00

abstract：:A multidirectional pin-on-plate reciprocating machine was used to compare the wear performance of UHMWPE sliding against cast cobalt chrome (CoCr) plates that were either untreated or coated with Amorphous Diamond Like Carbon (ADLC). The test conditions were based on a 1/5 scale model representative of in vivo motion ...

journal_title：Bio-medical materials and engineering

authors： Jones VC,Barton DC,Auger DD,Hardaker C,Stone MH,Fisher J

更新日期：2001-01-01 00:00:00

abstract：:The debris generated by the progressive wear of total joint replacement (TJR) devices is considered a primary cause of osteolysis, bone resorption, and premature failure of artificial hips and knees. The vast majority of this debris originates from the UHMWPE articulating surfaces caused by tribological interaction wi...

journal_title：Bio-medical materials and engineering

authors： Davidson JA,Poggie RA,Mishra AK

更新日期：1994-01-01 00:00:00

abstract：BACKGROUND:Platelet-rich plasma (PRP) has been used to solubilize freeze-dried chitosan (CS) formulations to form injectable implants for tissue repair. OBJECTIVE:To determine whether the in vitro performance of the formulations depends on the type of PRP preparation used to solubilize CS. METHODS:Formulations contai...

journal_title：Bio-medical materials and engineering

authors： Ghazi Zadeh L,Chevrier A,Lamontagne M,Buschmann MD,Hoemann CD,Lavertu M

更新日期：2019-01-01 00:00:00

abstract：:Level set method has been widely used in medical image analysis, but it has difficulties when being used in the segmentation of left ventricular (LV) boundaries on echocardiography images because the boundaries are not very distinguish, and the signal-to-noise ratio of echocardiography images is not very high. In this...

journal_title：Bio-medical materials and engineering

authors： Zhang Y,Gao Y,Li H,Teng Y,Kang Y

更新日期：2015-01-01 00:00:00

abstract：:A fracture mechanics approach has been adopted in the present study to investigate the fracture toughness behavior of three commercial composite resins for dental use named Clearfil photo posterior, P-50 and Occlusin. The resins have been cast in to ring-shaped specimens for the determination of individual fracture to...

journal_title：Bio-medical materials and engineering

authors： Higo Y,Damri D,Nunomura S,Kumada K,Sawa N,Hanaoka K,Teranaka T,Iwamoto T

更新日期：1991-01-01 00:00:00

abstract：:To select tag single nucleotide polymorphisms (SNPs) within and around human p75 neurotrophin receptor (p75NTR) gene in Chinese Han population, the sequence involving p75NTR gene as well as the upstream and downstream of the gene was identified according to the data from National Center for Biotechnology Information (...

journal_title：Bio-medical materials and engineering

authors： Wang YT,Lu XM,Shu YH,Xiao L,Chen KT

更新日期：2014-01-01 00:00:00

abstract：:Microarray data has small samples and high dimension, and it contains a significant amount of irrelevant and redundant genes. This paper proposes a hybrid ensemble method based on double disturbance to improve classification performance. Firstly, original genes are ranked through reliefF algorithm and part of the gene...

journal_title：Bio-medical materials and engineering

authors： Chen T,Xue H,Hong Z,Cui M,Zhao H

更新日期：2015-01-01 00:00:00

abstract：:The biological, biochemical, mechanical, and structural properties of artificial scaffolds for tissue engineering are known to be of great importance. Therefore, in this study a hydrogel derived scaffold with biomechanical and structural properties similar to native articular cartilage was synthesized. The gelatine-ba...

journal_title：Bio-medical materials and engineering

authors： Zehbe R,Libera J,Gross U,Schubert H

更新日期：2005-01-01 00:00:00

abstract：:Arrhythmia diagnosis is very significant to ensure human health. In this paper, a new model is developed for arrhythmia diagnosis. A salient feature of the algorithm is a synergistic combination of statistical and fuzzy set-based techniques. It is distribution-free and is realized in an unsupervised mode. Arrhythmia d...

journal_title：Bio-medical materials and engineering

authors： Li F,Zheng D,Zhao T

更新日期：2015-01-01 00:00:00

abstract：:In this investigation, ultrasonic parameters of kidney stones are measured, in vitro, using a double probe ultrasonic-through-transmission technique. Due to the complex chemical structure of these stones, a large variation in the values of the ultrasonic parameters is found. A correlation between ultrasonic properties...

journal_title：Bio-medical materials and engineering

authors： Singh VR,Dhawan JB

更新日期：1992-07-01 00:00:00

abstract：:Bioelectrical impedance phase angle has been recommended as a tool to assess nutrition state, but there are no measuring devices have been specially designed for hospital residents. In this study, a system was established for the measurement of bioelectrical impedance phase angle. The electrical composition, calculati...

journal_title：Bio-medical materials and engineering

authors： Zhang G,Huo X,Wu C,Zhang C,Duan Z

更新日期：2014-01-01 00:00:00

abstract：:The 5(and 6)-carboxyfluorescein diacetate (C-FDA) is used for a rapid and continuous counting of living cells. Nonfluorescent C-FDA is converted into fluorescent 5(and 6)-carboxyfluorescein (C-F) by the reaction with esterase, which is an enzyme of living cells. The conversion makes it possible to count the number of ...

journal_title：Bio-medical materials and engineering

authors： Sugata K,Ohnishi T,Matsumoto K

更新日期：1991-01-01 00:00:00

abstract：:Recognition of lung cancer cells is very important to the clinical diagnosis of lung cancer. In this paper we present a novel method to extract the structure characteristics of lung cancer cells and automatically recognize their types. Firstly soft mathematical morphology methods are used to enhance the grayscale imag...

journal_title：Bio-medical materials and engineering

authors： Chen YC,Hu KH,Li FZ,Li SY,Su WF,Huang ZY,Hu YX

更新日期：2006-01-01 00:00:00

abstract：BACKGROUND:Accelerated hydrothermal aging has long been one of the most widely accepted quality control tests for simulating low-temperature degradation (LTD) in zirconia-containing implants used in total hip arthroplasty (THA). However, it is still unclear how much consistency there is between the experimental predict...

journal_title：Bio-medical materials and engineering

authors： Tateiwa T,Takahashi Y,Pezzotti G,Shishido T,Masaoka T,Sano K,Yamamoto K

更新日期：2020-01-01 00:00:00

abstract：BACKGROUND:Previously we found that a group of phosphorylated proteins (SIBLINGs) in bone binds with the Ti-device, and increases the early bone formation around the Ti-implants remarkably. From these results, we explained the biochemical mechanism of a strong bond between living bone and Ti, which was discovered by Br...

journal_title：Bio-medical materials and engineering

authors： Song Q,Yagami K,Furusawa T,Takita H,Kurasaki M,Tokura S,Morimoto K,Sammons R,Iku S,Kuboki Y

更新日期：2020-01-01 00:00:00

abstract：BACKGROUND:Electrospinning is a highly effective method in order to generate nano-scaled fibers. In conventional electrospinning technique, geometry of nanofibers are mostly random due to the chaotic behavior of polymer jet. OBJECTIVE:Purpose of this study is to produce aligned nanofibers from PVP polymers with advanc...

journal_title：Bio-medical materials and engineering

authors： Karayeğen G,Koçum IC,Çökeli Ler Serdaroğlu D,Doğan M

更新日期：2018-01-01 00:00:00

abstract：BACKGROUND:Adhesive resin composite, which is used to bond orthodontic bracket to tooth surface is exposed to the influence of wear by tooth brushing and wear may influence loosening of the bracket. OBJECTIVE:The aim of this study was to evaluate in vitro the effect of tooth brushing on the adhesion strength of orthod...

journal_title：Bio-medical materials and engineering

authors： Durgesh BH,Alhijji S,Hashem MI,Al Kheraif AA,Durgesh P,Elsharawy M,Vallittu PK

更新日期：2016-09-28 00:00:00

abstract：:Since adhesive technology was introduced into dental field, metal-based restoration has been gradually replaced by metal-free restoration. Using the adhesive technology, minimum invasive technique has been possible in daily clinical practice as well as esthetic tooth-colored restorations have become very popular all o...

journal_title：Bio-medical materials and engineering

authors： Nagano F,Selimovic D,Noda M,Ikeda T,Tanaka T,Miyamoto Y,Koshiro K,Sano H

更新日期：2009-01-01 00:00:00

abstract：BACKGROUND:Gait analysis, such as portable gait rhythmogram (PGR), provides objective information that helps in the quantitative evaluation of human locomotion. OBJECTIVE:The purpose of this study was to assess the reliability of PGR in post-stroke patients. METHODS:Two raters (A and B) examined 48 post-stroke patien...

journal_title：Bio-medical materials and engineering

authors： Miyata R,Matsumoto S,Miura S,Kawamura K,Uema T,Miyara K,Niibo A,Hoei T,Ogura T,Shimodozono M

更新日期：2020-01-01 00:00:00

abstract：:Skilled behavior is difficult or impossible to articulate explicitly by the performers. Likewise biomechanical models of skilled motor actions are often limited by the lack of knowledge of the underlying mechanisms. A 'behavioral cloning' technique is described, based on a trained artificial neural network (ANN), that...

journal_title：Bio-medical materials and engineering

authors： Andrews BJ,Davoodi R,Kamnik R,Bajd T

更新日期：1998-01-01 00:00:00

abstract：:Biocompatible metals have been suggested as revolutionary biomaterials for bone-grafting therapies. Although metals and their alloys are widely and successfully used in producing biomedical implants due to their good mechanical properties and corrosion resistance, they have a lack in bioactivity. Therefore coating of ...

journal_title：Bio-medical materials and engineering

authors： Saleh MM,Touny AH,Al-Omair MA,Saleh MM

更新日期：2016-05-12 00:00:00

abstract：:Acrylic resins have been used in many different applications in dentistry, especially in the fabrication of provisional fixed partial dentures. Ideally, a provisional crown and bridge material should be easy to handle and should protect teeth against physical, chemical, and thermal injuries. Some of the problems assoc...

journal_title：Bio-medical materials and engineering

authors： Panyayong W,Oshida Y,Andres CJ,Barco TM,Brown DT,Hovijitra S

更新日期：2002-01-01 00:00:00

abstract：:In order to explore the effects of hydrogen sulfide (H2S) on myocardial fibrosis in diabetic rats and its underlying mechanisms, intraperitoneal injections of streptozotocin were used to establish the diabetes models and sodium hydrosulfide (NaHS) was used as an exogenous donor of H2S. Eight weeks later, Van Gieson st...

journal_title：Bio-medical materials and engineering

authors： Xiao T,Zeng O,Luo J,Wu Z,Li F,Yang J

更新日期：2015-01-01 00:00:00

abstract：BACKGROUND:Stenting has been proposed as an effective treatment to restore blood flow in obstructed arteries by plaques. Although several modified designs for stents have been suggested, most designs have the risk of disturbing blood flow. OBJECTIVE:The main objective is to propose a stent design to attain a uniform l...

journal_title：Bio-medical materials and engineering

authors： Beigzadeh B,Mirmohammadi SA,Ayatollahi MR

更新日期：2017-01-01 00:00:00

abstract：OBJECTIVE:To study the comprehensive biomechanical properties of the cancellous bone of distal femur through a series of mechanical tests, and provide relevant subjects with the basic technical data. BACKGROUND:The study on bone mechanics is a commonly used approach to evaluate the biomechanical competency of bone. Th...

journal_title：Bio-medical materials and engineering

authors： Du C,Ma H,Ruo M,Zhang Z,Yu X,Zeng Y

更新日期：2006-01-01 00:00:00

abstract：:As an injectable scaffold material for bone tissue engineering, calcium phosphate cement (CPC) has good biocompatibility, self-setting, and osteoconduction properties. Alginate-microencapsulated seed cells can pick up the degradation speed and bioactivity of CPC. The aim of this study was to explore the osteogenic abi...

journal_title：Bio-medical materials and engineering

authors： Wang J,Qiao P,Dong L,Li F,Xu T,Xie Q

更新日期：2014-01-01 00:00:00