Experimental exploration of mouse kidney imaging with the SR PCI technology.

abstract：BACKGROUND:Scallop shell powder is called bioshell calcium oxide (BiSCaO), which is known to possess deodorizing properties and broad antimicrobial activity against various pathogenic microbes, including viruses, bacteria, spores, and fungi. OBJECTIVE:This study aims to investigate the applications of BiSCaO suspensio...

journal_title：Bio-medical materials and engineering

authors： Takayama T,Ishihara M,Sato Y,Nakamura S,Fukuda K,Murakami K,Yokoe H

更新日期：2020-01-01 00:00:00

abstract：:The hip stem design based upon X-ray films requires sufficient information in order to customize for the patient. If the errors are resulted from rotating angles, more X-ray films may carry out the solution. The present study aimed to realize the improvement of multiple X-ray films for hip stem design. Eight X-ray fil...

journal_title：Bio-medical materials and engineering

authors： Wei HW,Chung MY,Huang VW,Cheng CK

更新日期：2004-01-01 00:00:00

abstract：:Two surface analytical spectroscopic techniques (namely, angular-dependent X-ray photoelectron spectroscopy and static secondary ion mass spectrometry) were used to characterize the nature and composition of the surface and near-surface layers formed on three biomedical polymers (namely, low-density polyethylene, expa...

journal_title：Bio-medical materials and engineering

authors： Lewis G,Newman J,Katz W

更新日期：1995-01-01 00:00:00

abstract：:The present review surveys studies on physical-chemical properties and biological response of living tissues to NiTi (Nitinol) carried out recently, aiming at an understanding of the place of this material among the implant alloys in use. Advantages of shape memory and superelasticity are analyzed in respect to functi...

journal_title：Bio-medical materials and engineering

authors： Shabalovskaya SA

更新日期：2002-01-01 00:00:00

abstract：OBJECTIVES:Chondrocytes hypertrophy is a physiological process observed in endochondral ossification during development until adolescence in human. It can also be observed during pathophysiological conditions such as osteoarthritis. Hypertrophic chondrocytes synthesise collagen X and express matrix metalloproteinase 13...

journal_title：Bio-medical materials and engineering

authors： Filip A,Bianchi A,Mainard D,Lacolley P,Magdalou J,Mercier N

更新日期：2015-01-01 00:00:00

abstract：BACKGROUND:Electrospinning is a highly effective method in order to generate nano-scaled fibers. In conventional electrospinning technique, geometry of nanofibers are mostly random due to the chaotic behavior of polymer jet. OBJECTIVE:Purpose of this study is to produce aligned nanofibers from PVP polymers with advanc...

journal_title：Bio-medical materials and engineering

authors： Karayeğen G,Koçum IC,Çökeli Ler Serdaroğlu D,Doğan M

更新日期：2018-01-01 00:00:00

abstract：:Metal patch test is often used in clinical settings when metal-induced contact dermatitis is suspected. However, the transdermal permeation behavior of metal ions from the patch test remains unclear. Current patch tests using high concentrations of metal salt solutions have some side effects, e.g. acute skin reactions...

journal_title：Bio-medical materials and engineering

authors： Sugiyama T,Uo M,Wada T,Hongo T,Omagari D,Komiyama K,Oikawa M,Kusama M,Mori Y

更新日期：2015-01-01 00:00:00

abstract：:High order partial least squares (HOPLS) is a novel data processing method. It is highly suitable for building prediction model which has tensor input and output. The objective of this study is to build a prediction model of the relationship between sinoatrial node field potential and high glucose using HOPLS. The thr...

journal_title：Bio-medical materials and engineering

authors： Feng Y,Cao H,Zhang Y

更新日期：2015-01-01 00:00:00

abstract：:The bonding strength of porcelains to metals depends on the oxide layer between the porcelain and the metal. Oxidation of a metal surface increases the bonding strength, whereas excessive oxidation decreases it. Titanium and its alloys are gaining acceptance for dental use since they exhibit excellent biocompatibility...

journal_title：Bio-medical materials and engineering

authors： Oshida Y,Hashem A

更新日期：1993-01-01 00:00:00

abstract：:Low-dose computed tomography reconstruction is an important issue in the medical imaging domain. Sparse-view has been widely studied as a potential strategy. Compressed sensing (CS) method has shown great potential to reconstruct high-quality CT images from sparse-view projection data. Nonetheless, low-contrast struct...

journal_title：Bio-medical materials and engineering

authors： Qi H,Chen Z,Guo J,Zhou L

更新日期：2015-01-01 00:00:00

abstract：:Robotized endoscope holder in laparoscopic surgeries allows surgeons to control the endoscope without the assistants' intervention. In this paper, a new method is proposed for the automatic 3D-tracking of laparoscopic instruments in real-time to provide more convenient interactions between surgeons and the robotized e...

journal_title：Bio-medical materials and engineering

authors： Zhao Z

更新日期：2014-01-01 00:00:00

abstract：BACKGROUND:Great potential of cellular therapies has generated extensive research in the field of cells harvesting and culturing. Transplantation of cell cultures has been used in a variety of therapeutic programs but in many cases it appeared that biomaterial scaffold or sheath would enhance cells regenerative potenti...

journal_title：Bio-medical materials and engineering

authors： Marycz K,Szarek D,Grzesiak J,Wrzeszcz K

更新日期：2014-01-01 00:00:00

abstract：:DMPC and DSPC liposomes were prepared via thin film hydration method followed by sonication. Propranolol solution was incorporated into liposomes at hydration stage. TEM images showed the sizes of DSPC and DMPC were around 88 and 137 nm, respectively. The highest encapsulation ratio of propranolol was approximately 70...

journal_title：Bio-medical materials and engineering

authors： Teong B,Kuo SM,Chen CH,Chen YK,Cheng ZJ,Huang HH

更新日期：2014-01-01 00:00:00

abstract：:Resorbable ceramics can promote the bony integration of implants. Their rate of degradation should ideally be synchronized with bone regeneration. This study examined the effect of rapidly resorbable calcium phosphate ceramics 602020, GB14, 305020 on adherence, proliferation and morphology of human bone-derived cells ...

journal_title：Bio-medical materials and engineering

authors： Radetzki F,Wohlrab D,Zeh A,Delank KS,Mendel T,Berger G,Syrowatka F,Mayr O,Bernstein A

更新日期：2011-01-01 00:00:00

abstract：:Polycrystalline diamond (PCD) exhibits excellent abrasive characteristics and is commonly used as loose grains for precision machining of hard ceramics and other materials that are difficult to grind and polish. In the present study, we investigated using bonded PCD for polishing dental porcelain, for which a lustrous...

journal_title：Bio-medical materials and engineering

authors： Nakamura Y,Sato H,Ohtsuka M,Hojo S

更新日期：2010-01-01 00:00:00

abstract：:Hyaluronic acid (HA) was used as an internal phase additive to improve the loading efficiency of ofloxacin, a hydrophilic drug encapsulated by hydrophobic polylactic-co-glycolic acid (PLGA) materials, through a double emulsion (water-in-oil-in-water) solvent extraction/evaporation method. Results from laser distributi...

journal_title：Bio-medical materials and engineering

authors： Wu G,Chen L,Li H,Wang YJ

更新日期：2014-01-01 00:00:00

abstract：:Mechanical testing has been performed to characterize the locking strength of Morse taper locks used for reconstruction of large bone defects. Taper joint pairs were locked with a series of compressive loads increasing from 500 to 3500 N. Following each load application the taper locks were distracted with either an a...

journal_title：Bio-medical materials and engineering

authors： Duda GN,Elias JJ,Valdevit A,Chao EY

更新日期：1997-01-01 00:00:00

abstract：BACKGROUND:Platelet-rich plasma (PRP) has been used to solubilize freeze-dried chitosan (CS) formulations to form injectable implants for tissue repair. OBJECTIVE:To determine whether the in vitro performance of the formulations depends on the type of PRP preparation used to solubilize CS. METHODS:Formulations contai...

journal_title：Bio-medical materials and engineering

authors： Ghazi Zadeh L,Chevrier A,Lamontagne M,Buschmann MD,Hoemann CD,Lavertu M

更新日期：2019-01-01 00:00:00

abstract：:A novel technique and product for carpal tunnel microscopic surgical procedures using a modified medical device containing a head as a surgical scalpel under light guidance were designed and studied. The novel design of the medical device was developed and applied in a new carpal tunnel microscopic surgical procedure ...

journal_title：Bio-medical materials and engineering

authors： Chiang MC,Huang CC

更新日期：2015-01-01 00:00:00

abstract：:The method used in this paper is developed to estimate the degree of viscoelasticity of the blood vessel wall in a noninvasive mechanical method. In this proposed method, we can obtain an output waveform connected with mechanical behavior of blood vessels by using Ultrasonic Doppler Effect Sensory (UDES). Characterizi...

journal_title：Bio-medical materials and engineering

authors： Yoshinari H,Yokobori AT Jr,Ohkuma T

更新日期：1994-01-01 00:00:00

abstract：:In this investigation, ultrasonic parameters of kidney stones are measured, in vitro, using a double probe ultrasonic-through-transmission technique. Due to the complex chemical structure of these stones, a large variation in the values of the ultrasonic parameters is found. A correlation between ultrasonic properties...

journal_title：Bio-medical materials and engineering

authors： Singh VR,Dhawan JB

更新日期：1992-07-01 00:00:00

abstract：:The aim of this study is to design a statistical segmentation technique to allow extraction of grey matter, white matter and cerebral spinal fluid volumes from diffusion tensor imaging. Four channel maps of the DTI are used as the input features, which provide more information for brain tissue segmentation compared wi...

journal_title：Bio-medical materials and engineering

authors： Wen Y,He L

更新日期：2014-01-01 00:00:00

abstract：:The biological, biochemical, mechanical, and structural properties of artificial scaffolds for tissue engineering are known to be of great importance. Therefore, in this study a hydrogel derived scaffold with biomechanical and structural properties similar to native articular cartilage was synthesized. The gelatine-ba...

journal_title：Bio-medical materials and engineering

authors： Zehbe R,Libera J,Gross U,Schubert H

更新日期：2005-01-01 00:00:00

abstract：:In recent years, there is an increasing utilization and demand to use magnetic fields in bioengineering applications due to its beneficial effects. Although in the last decade more attention has been given by tribologists to the electromagnetic processes taking place between sliding surfaces, which influence the tribo...

journal_title：Bio-medical materials and engineering

authors： Zaki M,Aljinaidi A,Hamed M

更新日期：2003-01-01 00:00:00

abstract：:Mesenchymal stem cells (MSCs) are a common tool in regenerative medicine. The nanoscale extracellular vesicles (nEVs) secreted by these cells were recently brought up to light thanks to their therapeutic potential. In this study, we assessed the in vitro behaviour of human umbilical vein endothelial cells (HUVECs) exp...

journal_title：Bio-medical materials and engineering

authors： Dostert G,Willemin AS,Jouan-Hureaux V,Louis H,Hupont S,Gillet P,Menu P,Decot V,Moby V,Velot É

更新日期：2017-01-01 00:00:00

abstract：PURPOSE:To establish a method for mouse coronary angiography in vivo using synchrotron radiation, which is essential for physiological and pathological research on coronary diseases. METHODS:1) The imaging parameters (e.g., photon energy, spatial resolution of the detector, and injection rate of contrast agent) optima...

journal_title：Bio-medical materials and engineering

authors： Xu L,Zhang A,Du G,Xie H,Chen Y

更新日期：2014-01-01 00:00:00

abstract：:To investigate the inhibition effect of oxymatrine induces human lung cancer A549 cells apoptosis. The A549 cells were cultured for 24 h, than the various concentration of oxymatrine (2 mmol/L, 4 mmol/L, 8 mmol/L, 15 mmol/L) were added into different experimental group cells, and 5-fluorouracil were added into the pos...

journal_title：Bio-medical materials and engineering

authors： Wang B,Han Q,Zhu Y

更新日期：2015-01-01 00:00:00

abstract：BACKGROUND:Patients use mouthwashes in addition to mechanical cleaning during orthodontic treatment. The effects of mouthwashes on the archwires have not been examined yet. OBJECTIVE:To compare the corrosion resistance of four different arch wires and corrosion effects of different mouthwashes to formulate a biocompat...

journal_title：Bio-medical materials and engineering

authors： Nalbantgil D,Ulkur F,Kardas G,Culha M

更新日期：2016-11-25 00:00:00

abstract：:Biocompatible metals have been suggested as revolutionary biomaterials for bone-grafting therapies. Although metals and their alloys are widely and successfully used in producing biomedical implants due to their good mechanical properties and corrosion resistance, they have a lack in bioactivity. Therefore coating of ...

journal_title：Bio-medical materials and engineering

authors： Saleh MM,Touny AH,Al-Omair MA,Saleh MM

更新日期：2016-05-12 00:00:00

abstract：:A layer of L-glycine-molecule-imprinted polyaniline (LMIP-PANI) polymer film has been modified on a carbon fiber electrode for the determination of L-glycine standard samples and L-glycine in cerebrospinal fluid of wistar mice. It has been found that a linear relationship exists between current and concentration for t...

journal_title：Bio-medical materials and engineering

authors： Zeng H,Wang D,Yu J

更新日期：2014-01-01 00:00:00