Abstract：
:An experimental and computational investigation of the self-tapping ability of carbon fibre reinforced polyetheretherketone (CFR-PEEK) has been conducted. Six CFR-PEEK suture anchor designs were investigated using PEEK-OPTIMA® Reinforced, a medical grade of CFR-PEEK. Experimental tests were conducted to investigate the maximum axial force and torque required for self-taping insertion of each anchor design. Additional experimental tests were conducted for some anchor designs using pilot holes. Computational simulations were conducted to determine the maximum stress in each anchor design at various stages of insertion. Simulations also were performed to investigate the effect of wall thickness in the anchor head. The maximum axial force required to insert a self-tapping CFR-PEEK suture anchor did not exceed 150 N for any anchor design. The maximum torque required to insert a self-tapping CFR-PEEK suture anchor did not exceed 0.8 Nm. Computational simulations reveal significant stress concentrations in the region of the anchor tip, demonstrating that a re-design of the tip geometry should be performed to avoid fracture during self-tapping, as observed in the experimental component of this study. This study demonstrates the ability of PEEK-OPTIMA Reinforced suture anchors to self-tap polyurethane foam bone analogue. This provides motivation to further investigate the self-tapping ability of CFR-PEEK suture anchors in animal/cadaveric bone. An optimised design for CFR-PEEK suture anchors offers the advantages of radiolucency, and mechanical properties similar to bone with the ability to self-tap. This may have positive implications for reducing surgery times and the associated costs with the procedure.
journal_name
J Biomater Appljournal_title
Journal of biomaterials applicationsauthors
Feerick EM,Wilson J,Jarman-Smith M,Ó'Brádaigh CM,McGarry JPdoi
10.1177/0885328214535274subject
Has Abstractpub_date
2014-10-01 00:00:00pages
502-13issue
4eissn
0885-3282issn
1530-8022pii
0885328214535274journal_volume
29pub_type
杂志文章abstract：:In this work, the role of shock wave-induced increase of bone morphogenetic proteins in modulating the osteogenic properties of osteoblast-like cells seeded on a bioactive scaffold was investigated using gremlin as a bone morphogenetic protein antagonist. Bone-like glass-ceramic scaffolds, based on a silicate experime...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328214541974
更新日期：2014-11-01 00:00:00
abstract：PURPOSE:A functionalized graphene oxide-based thermosensitive hydrogel loaded with docetaxel for intratumoral delivery was designed to enhance therapeutic efficacy and alleviate system toxicity. METHODS:First, graphene oxide was functionalized with chitosan to acquire high stability in physiological solutions. And the...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328215619583
更新日期：2016-03-01 00:00:00
abstract：:A range of crystalline and nano-sized carbonate- and silicate-substituted hydroxyapatite has been successfully produced by using continuous hydrothermal flow synthesis technology. Ion-substituted calcium phosphates are better candidates for bone replacement applications (due to improved bioactivity) as compared to pha...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328212460289
更新日期：2013-09-01 00:00:00
abstract：:Phenylalanine ethyl ester (PAE)-alginate (Alg) conjugate (PAE-Alg, PEA) was synthesized and formation of an amide bond between PAE and Alg was confirmed by Fourier transformed-infrared and (1)H nuclear magnetic resonance spectroscopy. The degree of PAE substitution was 3.5-4.7 (PAE group per hundred sugar residues of ...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328216630497
更新日期：2016-07-01 00:00:00
abstract：:Silicate-based cements have been developed as a class of bioactive and biodegradable bone cements owing to their good in vitro bioactivity and ability to dissolve in a simulated body fluid. Until recently, however, the in vivo evidence of their ability to support bone regeneration is still scarce. In the present study...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328217715428
更新日期：2017-08-01 00:00:00
abstract：:Bone tissue is dependent on an efficient blood supply to ensure delivery of nutrients and oxygen. One method to acquire a vascular-engineered bone tissue could be the use of an angiogenic gene-activated scaffold. In the current study, porous chitosan/hydroxyapatite (C/HA) scaffolds were fabricated via freeze-drying wi...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328214544769
更新日期：2014-11-01 00:00:00
abstract：:Biomaterials and devices have been used in a variety of applications ranging from disposable extracorporeal devices and soft and hard tissue augmentation, to total artificial internal organs. However, there are risks and failures in each application which are a result of undesirable biological interactions. This artic...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/088532829300800104
更新日期：1993-07-01 00:00:00
abstract：:Chitosan-glutaraldehyde microparticles were produced by emulsion crosslinking method to be used as drug delivery system for polyphenols from Thymus serpyllum L. aqueous extract. The effect of preparation conditions, chitosan concentration (1.5-3% w/v), and glutaraldehyde/chitosan (GA/Ch) mass ratio (0.15-1.20) on wate...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328215598940
更新日期：2015-11-01 00:00:00
abstract：:The development and improvement of medical devices and artificial organs is critically dependent on the realisation of the importance of the interactions between materials and body tissues. In this regard, the evaluation of biocompatibility assumes paramount importance. This paper reviews the hematological aspects of ...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章,评审
doi：10.1177/088532829701200104
更新日期：1997-07-01 00:00:00
abstract：:Cellulose acetate phthalate and Pluronic F-127 combined together (70:30 wt:wt) create a rigid, surface-eroding association polymer. To impart flexibility into the polymer system and allow for a drug delivery film that can contour to varying wound shapes, plasticizers were added. Triethyl citrate or tributyl citrate wa...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328213480979
更新日期：2014-01-01 00:00:00
abstract：:The aim of the in vitro study was a comparison of an allogenic (ABSM) and a xenogenic bone substitute material (XBSM) with and without injectable platelet-rich fibrin (ABSM-i-PRF & XBSM-i-PRF) on cell characteristics of human osteoblasts (HOB). Here, ABSM and XBSM (+ i-PRF = test; - i-PRF = control) were incubated wit...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328220914407
更新日期：2020-07-01 00:00:00
abstract：:The production of large quantities of functional vascularized bone tissue ex vivo still represent an unmet clinical challenge. Microcarriers offer a potential solution to scalable manufacture of bone tissue due to their high surface area-to-volume ratio and the capacity to be assembled using a modular approach. Microc...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328217720812
更新日期：2017-09-01 00:00:00
abstract：:The process of molecular self-assembly plays a crucial role in formulation of polymeric nanoparticulated drug delivery carriers as it creates the possibility for enhanced drug encapsulation and carrier surface engineering. This study aimed to develop a novel self-assembled polymeric micelles for targeted delivery in t...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328214549612
更新日期：2015-01-01 00:00:00
abstract：:Single nanofibers with chemical and functional properties consistent with artery extracellular matrix nanofibers were produced by electrospinning. Using weight ratios to mimic artery extracellular matrix, five materials were tested: (1) Collagen type I, (2) Collagen type I + Collagen type III, (3) Collagen type I + po...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328213477893
更新日期：2014-01-01 00:00:00
abstract：:Calcium phosphate fillers have been shown to increase cement osteoconductivity, but have caused drawbacks in cement properties. Hydroxyapatite and Brushite were introduced in an acrylic two-solution cement at varying concentrations. Novel composite bone cements were developed and characterized using rheology, injectab...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328214544770
更新日期：2014-11-01 00:00:00
abstract：:Pluronic® F127 is a biocompatible, injectable, and thermoresponsive polymer with promising biomedical applications. In this study, a chemically modified form, i.e., Pluronic ALA-L with tailored degradation rate, was tested as an encapsulation vehicle for osteoblastic cells. UV cross-linking of the modified polymer res...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328211427774
更新日期：2013-03-01 00:00:00
abstract：:The objective of the present study was to incorporate strontium into calcium phosphate cement combined with a lower single-dose local administration of bone morphogenetic protein-2 to enhance its in vivo biodegradation and bone tissue growth. After the creation of a rodent critical-sized femoral metaphyseal bone defec...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328218765847
更新日期：2018-07-01 00:00:00
abstract：:Antenna coupling microwave plasma enables a highly oxidative treatment of the outmost surface of polypropylene (PP) nonwoven fabric within a short time period. Subsequently, grafting copolymerization with acrylic acid (AAc) makes the plasma-treated fabric durably hydrophilic and excellent in water absorbency. With hig...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1106/088532802030478
更新日期：2002-10-01 00:00:00
abstract：:The aim of this study was to evaluate the possibility of metal complex formation between sodium-phosphorylated chitosan (PCTS) and ZnO. The polymer-metal complex formation was investigated in terms of thermal degradation. The structure deduction of the PCTS/ZnO complex was investigated by means of Fourier transform in...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328211408371
更新日期：2012-11-01 00:00:00
abstract：:The controlled release of insulin from a series of biodegradable hybrid hydrogel network containing dextran derivative of allyl isocyanate (dex-AI) and poly (D,L) lactide diacrylate macromer (PDLLAM) over a wide range of composition ratio was investigated. Laser confocal scanning microscope was used to understand the ...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1106/088532802024248
更新日期：2002-04-01 00:00:00
abstract：:The carcinogenic potential of asbestos has led to the development of non-asbestos materials for use as casting ring liners. Cellulose paper are replacing asbestos paper. The brass die and crown were made to produce full crowns. The standardized wax pattern was replicated twenty-nine times. Two grooves were marked on t...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/088532820001400406
更新日期：2000-04-01 00:00:00
abstract：:Staphylococcus epidermidis plays a major role in capsular contractures of silicone breast implants. This in vitro study evaluates the antibacterial effect of copper on S. epidermidis in silicone implants. Specimens of a silicone material used for breast augmentation (Cu0) and specimens coated with different copper con...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328212441957
更新日期：2013-08-01 00:00:00
abstract：:A multifunctional targeted nanoplatform combining photothermal therapy and chemotherapy has emerged as a promising strategy for comprehensive therapies of breast cancer. In this study, we constructed human epidermal growth factor receptor 2 (Her2)-targeted gold nanoshelled poly(lactic-co-glycolic acid) hybrid nanocaps...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328220929616
更新日期：2020-09-01 00:00:00
abstract：:Magnesium-based alloys exhibit biodegradable, biocompatible and excellent mechanical properties which enable them to serve as ideal candidate biomedical materials. In particular, their biodegradable ability helps patients to avoid a second surgery. The corrosion rate, however, is too rapid to sustain the healing proce...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章,评审
doi：10.1177/0885328219834656
更新日期：2019-05-01 00:00:00
abstract：:The effect of hybrid material-graphene flakes with Fe3O4 nanospheres (GO-Fe3O4), graphene oxide (GO) and magnetite nanospheres (Fe3O4) in rotating magnetic field on mammalian cells metabolism has been studied. Several reports shown that exposure to magnetic field may have influence on cellular membrane permeability. T...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328216628762
更新日期：2016-04-01 00:00:00
abstract：:This study's aim consists of evaluating the adhesion and proliferation of mesenchymal stem cells (MSCs) derived from rat bone marrow on nanoparticle Titanium (Ti) surface. Hence, passage 3 MSCs were, respectively, seeded on nanoparticle Ti and pure Ti surfaces and then cultured for 32 h. Cell morphology and viability ...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328211414750
更新日期：2013-01-01 00:00:00
abstract：:Osteo-odonto-keratoprostheses, incorporating dental laminate material as an anchoring skirt around a central poly(methyl methacrylate) (PMMA) optic, have been used to replace the cornea for many years. However, there are many intricacies associated with the use of autologous dental laminate material, surgical complexi...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328220972219
更新日期：2020-11-11 00:00:00
abstract：:Two series of glasses of general formula (2-p) SiO2.1.1Na2O.CaO.pP2O5.xZnO (p=0.10, 0.20; x=0.0, 0.16, 0.35, and 0.78) have been analyzed for physico-chemical surface features before and after contact with simulated body fluid, morphological characteristics, and osteoblast-like cells behavior when cultured on them. Th...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328207079731
更新日期：2008-05-01 00:00:00
abstract：:NiTi alloy is used as a biomaterial due to its pseudoelastic behaviour. It exhibits a great potential in dental and orthopedic applications where constant correcting loads are required. In order to use such materials, it is necessary to investigate the effect of the cyclic straining upon the transformation stresses an...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/088532829801200304
更新日期：1998-01-01 00:00:00
abstract：:Sodium alginate is an effective biomaterial for tissue engineering applications. Non-purified alginate is contaminated with protein, lipopolysaccharide, DNA, and RNA, which could elicit adverse immunological reactions. We developed a purification protocol to generate biocompatible alginate based on (a) activated charc...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328216645952
更新日期：2016-10-01 00:00:00
