Barcoll hardness of different resin-based composites cured by halogen or light emitting diode (LED).

Abstract:

:The clinical performance of light curing resin composites is greatly influenced by the quality of the light-curing unit (LCU). Halogen LCUs are commonly used for curing composite materials. However, they have some drawbacks. The development of new, blue, super bright light emitting diodes (LED LCU) of 470-nm wavelength with high light irradiance comes as an alternative to standard halogen LCUs of 450-470-nm wavelengths. This study evaluated the surface hardness of the different resin-based composites (flowable, hybrid and packable resin composites) cured by LED LCU or halogen LCU. A Teflon mold 10-mm in diameter and 2-mm in depth was made to obtain five disk-shaped specimens for each experimental group. Then, the specimens were cured by an LED LCU or halogen LCU for 40 seconds. The hardness of the upper and lower surfaces was measured with a Barcoll hardness-measuring instrument. The statistical analysis was performed using one-way analysis of variance (ANOVA) and Duncan test at a p=0.05 significance level. The results of the hardness test indicated that the hardness of resin composites cured by an LED LCU were greater than those cured by a halogen LCU. Additionally, for all resin-based composites, the hardness values for the upper surfaces were higher than the lower surfaces. However, for both results no statistically significant differences were observed (p>0.05).

journal_name

Oper Dent

journal_title

Operative dentistry

authors

Bala O,Uçtasli MB,Tüz MA

keywords:

subject

Has Abstract

pub_date

2005-01-01 00:00:00

pages

69-74

issue

1

eissn

0361-7734

issn

1559-2863

journal_volume

30

pub_type

杂志文章
  • Accuracy of ceramic restorations made using an in-office optical scanning technique: an in vitro study.

    abstract::The present in vitro study concerns determination of the pre-cementation gap width of all-ceramic crowns made using an in-office digital-impression technique and subsequent computer-aided design/computer-aided manufacturing (CAD/CAM) production. Two chairside video camera systems were used: the Lava Oral scanner and C...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/12-309-L

    authors: Tidehag P,Ottosson K,Sjögren G

    更新日期:2014-05-01 00:00:00

  • Cuspal Deflection in Premolar Teeth Restored with Bulk-Fill Resin-Based Composite Materials.

    abstract::The present study investigated the effect of three high-viscosity bulk-fill resin-based composite materials on cuspal deflection in natural teeth. Thirty-two sound maxillary premolar teeth with large slot mesio-occlusal-distal cavities were distributed into four groups (n=8). Three groups were restored with bulk-fill ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/16-072-L

    authors: Elsharkasi MM,Platt JA,Cook NB,Yassen GH,Matis BA

    更新日期:2018-01-01 00:00:00

  • Six-month Follow-up of the Effect of Nonvital Bleaching on IL-1β and RANK-L: A Randomized Clinical Trial.

    abstract:OBJECTIVES:It has been reported that bleaching generates an increase in the activity of osteoclasts in vitro. We quantified the RANK-L and IL-1β biomarkers in a double-blind, randomized clinical trial evaluating the in vivo effect of hydrogen peroxide (35%) and peroxide carbamide (37%) six months after whitening. METH...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/18-023-C

    authors: Bersezio C,Estay J,Sáez M,Sánchez F,Vernal R,Fernández E

    更新日期:2019-11-01 00:00:00

  • Efficiency of the polymer bur SmartPrep compared with conventional tungsten carbide bud bur in dentin caries excavation.

    abstract::SmartPrep is a rotating instrument for dentin caries excavation made from a special polymer. The manufacturer's product information stated that SmartPrep removes carious dentin selectively. This in vitro study compared the efficiency of SmartPrep with conventional tungsten carbide bud burs. Fifty extracted teeth were ...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/05-24

    authors: Dammaschke T,Rodenberg TN,Schäfer E,Ott KH

    更新日期:2006-03-01 00:00:00

  • Microleakage resistance of minimally invasive Class I flowable composite restorations.

    abstract::Minimally invasive flowable composite Class I restorations are widely used. However, flowable composites are characterized by low filler contents, modified resin formulations, low moduli of elasticity, low viscosity, generally poor mechanical properties, and decreased long-term stability. The purpose of this study was...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/11-106-L

    authors: Bonilla ED,Stevenson RG,Caputo AA,White SN

    更新日期:2012-05-01 00:00:00

  • Masking of High-Translucency Zirconia for Various Cores.

    abstract::Various core materials with different shades affect the final color of high-translucency monolithic zirconia restorations. The blue core shows the greatest color difference in final zirconia restorations followed by metal, A3 dentin-shade resin core, and white core. ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/19-238-L

    authors: Jung J,Roh BD,Kim JH,Shin Y

    更新日期:2020-12-21 00:00:00

  • Combination of Acetaminophen/Codeine Analgesics Does Not Avoid Bleaching-Induced Tooth Sensitivity: A Randomized, Triple-Blind Two-Center Clinical Trial.

    abstract::Bleaching-induced tooth sensitivity (TS) is highly prevalent. OBJECTIVE:This study aimed to determine if the combination of opioids and nonopioids analgesics (Tylex) may provide a better analgesic effect. METHOD:A triple-blind, parallel, randomized two-center clinical trial was conducted with 105 healthy patients wh...

    journal_title:Operative dentistry

    pub_type: 杂志文章,多中心研究,随机对照试验

    doi:10.2341/17-092-C

    authors: Coppla FM,Rezende M,de Paula E,Farago PV,Loguercio AD,Kossatz S,Reis A

    更新日期:2018-03-01 00:00:00

  • Chromatic influence of value resin composites.

    abstract::The current study evaluated the chromatic influence of high, medium and low value composites on a dentin composite substrate (A2 shade) using spectrophotometric analysis. The specimens were divided into the following four groups: a) control (CG), entirely composed of dentin composite (n = 5); b) high value (GHV), dent...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/09-44-L

    authors: Schmeling M,Meyer-Filho A,de Andrada MA,Baratieri LN

    更新日期:2010-01-01 00:00:00

  • Sudden Onset of Subcutaneous Air Emphysema After the Application of Air to a Maxillary Premolar Located in a Nonsurgical Field.

    abstract::Although rare, subcutaneous air emphysema can occur during dental procedures such as endodontic treatment, surgical extractions, and preparing a tooth for an indirect or direct dental restoration. We report the development of a subcutaneous air emphysema that was introduced through the periodontal ligament of an untre...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/15-155-S

    authors: Van Tubergen EA,Tindle D,Fox GM

    更新日期:2017-09-01 00:00:00

  • Composite photopolymerization with diode laser.

    abstract::Under clinical conditions, the time needed for the proper light curing of luting composites or the multi-incremental buildup of a large restoration with halogen curing units is quite extensive. Due to the development of high power curing devices, such as argon lasers and plasma arc lights and, in order to decrease cur...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/06-79

    authors: Knezevic A,Ristic M,Demoli N,Tarle Z,Music S,Negovetic Mandic V

    更新日期:2007-05-01 00:00:00

  • Treatment of Dentin Hypersensitivity Using Nano-Hydroxyapatite Pastes: A Randomized Three-Month Clinical Trial.

    abstract:OBJECTIVES:This randomized clinical trial tested the three-month desensitizing effect of two protocols using nano-hydroxyapatite formulations compared with Pro-Argin and fluoride varnish. METHODS:Twenty-eight subjects with 137 teeth presenting dentin exposure with a minimal hypersensitivity of four on the visual analo...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/15-145-C

    authors: Wang L,Magalhães AC,Francisconi-Dos-Rios LF,Calabria MP,Araújo D,Buzalaf M,Lauris J,Pereira JC

    更新日期:2016-07-01 00:00:00

  • Retentiveness of metal coping luted to teeth of uremic patients undergoing hemodialysis using five different luting cements.

    abstract:OBJECTIVES:This study aimed to assess the retention of metal copings luted to uremic teeth with five different luting agents. METHODS:A total of 35 sound natural molars was collected from uremic patients and randomly assigned into five groups (n=7). The teeth were prepared for metal copings using diamond tips and wate...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/12-523-LR2

    authors: Ghazy MH,Aboumadina MM,Mahmoud SH

    更新日期:2014-05-01 00:00:00

  • A Conservative Approach to Ceramic Veneers: A Case Report.

    abstract::Bonding to enamel has been shown to provide reliable results, and thus conservative tooth preparations are key to the success of ceramic bonded restorations. The wax-up is the first diagnostic tool available to evaluate discrepancies between current and ideal tooth proportions. The clinician's diagnostic mock-up provi...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/19-051-T

    authors: Jurado C,Watanabe H,Tinoco JV,Valenzuela HU,Perez GG,Tsujimoto A

    更新日期:2020-05-01 00:00:00

  • Multidisciplinary Treatment of Complicated Crown-Root Fractures: A Case Study.

    abstract::Traumatic dental injuries usually occur among children and adolescents, with maxillary central incisors as the most often affected teeth. Complicated crown-root fractures are particularly challenging for esthetic and functional rehabilitation and often require a multidisciplinary approach. A 21-year-old male patient c...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/15-080-T

    authors: Stojanac IL,Bajkin BV,Premovic MT,Ramic BD,Petrovic LM

    更新日期:2016-11-01 00:00:00

  • Lesion Activity Assessment (LAA) in Conjunction With International Caries Detection and Assessment System (ICDAS) for Occlusal Caries Diagnosis in Permanent Teeth.

    abstract:OBJECTIVE:The aim of this study was to investigate the clinical performance and to validate the Lesion Activity Assessment (LAA) in conjunction with the International Caries Detection and Assessment System (ICDAS) for occlusal caries diagnosis in permanent teeth. METHODS:Patients with erupted or partially erupted thir...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/13-332-C

    authors: Cotta F,de Castilho LS,Moreira AN,Paiva SM,Ferreira EF,Ferreira LC,Magalhães CS

    更新日期:2015-09-01 00:00:00

  • Effect of LED curing modes on cusp deflection and hardness of composite restorations.

    abstract::This in vitro study measured cusp deflection associated with MOD resin composite restorations in maxillary premolars with different curing light modes. Soft-start polymerization may reduce cusp deflection by reducing polymerization shrinkage stress. Forty maxillary premolars were mounted in stone and slot MOD cavities...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:

    authors: Alomari QD,Mansour YF

    更新日期:2005-11-01 00:00:00

  • Effect of light intensity and exposure duration on cure of resin composite.

    abstract::Of the many factors under their control, clinicians can manipulate light-exposure duration but must deal with a set intensity of light emitted from the dental curing unit. This research investigates the interdependence of exposure duration and source intensity on resin cure at various depths within a simulated light-c...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Rueggeberg FA,Caughman WF,Curtis JW Jr

    更新日期:1994-01-01 00:00:00

  • Effect of time and polymerization cycle on the degree of conversion of a resin composite.

    abstract::The aim of this investigation was to verify the influence of 3 light curing units on the degree of conversion, using different irradiation conditions: 1) manufacturers' recommended times of photo-activation, 2) standardizing total energy density among the units and 3) standardizing energy density at the 450-490 nm wav...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/05-81

    authors: Schneider LF,Consani S,Ogliari F,Correr AB,Sobrinho LC,Sinhoreti MA

    更新日期:2006-07-01 00:00:00

  • Repair of dimethacrylate-based composite restorations by a silorane-based composite: a one-year randomized clinical trial.

    abstract:PURPOSE:To investigate clinical performance of a low-shrinkage silorane-based composite resin when used for repairing conventional dimethacrylate-based composite restorations. BACKGROUND:Despite the continued development of resin-based materials, polymerization shrinkage and shrinkage stress still require improvement....

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/11-121-C

    authors: Popoff DA,Santa Rosa TT,Ferreira RC,Magalhães CS,Moreira AN,Mjör IA

    更新日期:2012-09-01 00:00:00

  • Two-year clinical comparison of a microfilled and a hybrid resin-based composite in non-carious Class V lesions.

    abstract::The purpose of this double-blind clinical trial was to compare the retention rate in noncarious Class V lesions of two resin-based composite restorative materials with contrasting stiffness. Isolation with retraction cord, pressed paper triangles, and cotton rolls was used to closely mimic the procedures generally use...

    journal_title:Operative dentistry

    pub_type: 临床试验,杂志文章,随机对照试验

    doi:

    authors: Browning WD,Brackett WW,Gilpatrick RO

    更新日期:2000-01-01 00:00:00

  • Nanoleakage at the dentin adhesive interface vs microtensile bond strength.

    abstract::Excessive etching of the dentin may decrease bond strength because the adhesive may fail to completely infiltrate to the base of the over-etched demineralized collagen network. The purpose of the present study was to evaluate the influence of increasing etching times on the microtensile bond strength of Single Bond an...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Paul SJ,Welter DA,Ghazi M,Pashley D

    更新日期:1999-05-01 00:00:00

  • Inactivation of matrix-bound matrix metalloproteinases by cross-linking agents in acid-etched dentin.

    abstract:OBJECTIVES:Published transmission electron microscopy analysis of in vitro resin-dentin bonds shows that, after 44 months, almost 70% of collagen fibrils from the hybrid layer disappear. Matrix metalloproteinases (MMPs) play an important role in that process and are thought to be the main factor responsible for the sol...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/12-425-L

    authors: Scheffel DL,Hebling J,Scheffel RH,Agee K,Turco G,de Souza Costa CA,Pashley D

    更新日期:2014-03-01 00:00:00

  • Degree of conversion and hardness of a silorane-based composite resin: effect of light-curing unit and depth.

    abstract:PURPOSE:To investigate the effect of different light-curing units and depths on the degree of conversion (DC) through Fourier transform infrared spectroscopy (FTIR) and Knoop Hardness Number (KHN) of a silorane-based composite resin (Filtek LS, 3M ESPE, St Paul, MN, USA) (LS). MATERIALS AND METHODS:LS specimens mounte...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/12-479

    authors: Torres SA,Silva GC,Maria DA,Campos WR,Magalhães CS,Moreira AN

    更新日期:2014-05-01 00:00:00

  • Structural Integrity Evaluation of Large MOD Restorations Fabricated With a Bulk-Fill and a CAD/CAM Resin Composite Material.

    abstract:AIMS:To evaluate the effect of two composite restorative techniques (direct bulk fill vs indirect CAD/CAM) on the fracture resistance and mode of fracture of extended mesio-occlusal-distal (MOD) cavity preparations. METHODS:Fifty-one sound human mandibular third molars were divided into three groups (n=17). Extended b...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/18-013-L

    authors: Papadopoulos C,Dionysopoulos D,Tolidis K,Kouros P,Koliniotou-Koumpia E,Tsitrou EA

    更新日期:2019-05-01 00:00:00

  • Rx for caries prevention: time line for home care. A software aid for communication of patient instructions for management of dental caries.

    abstract::Treatment of a caries active patient requires the clinician to be knowledgeable in the restorative and risk management issues with which these patients often present. Modifications of risk factors that promote dental caries play an important part in the long-term restorative success in these patients. Patient complian...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Newitter DA,Meiers JC,Kazemi RB

    更新日期:2002-03-01 00:00:00

  • Restoration of occlusal vertical dimension in dental erosion caused by gastroesophageal reflux: case report.

    abstract::The authors describe a minimally invasive procedure for occlusal rehabilitation in a young patient presenting with mild mandibular prognathism and loss of occlusal vertical dimension caused by dental erosion from chronic gastroesophageal reflux. ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/09-110T

    authors: Reston EG,Closs LQ,Busato AL,Broliato GA,Tessarollo FR

    更新日期:2010-01-01 00:00:00

  • The influence of elastic modulus of inlay materials on stress distribution and fracture of premolars.

    abstract::SUMMARY The purpose of this study was to evaluate the influence the width of the occlusal isthmus and inlay material had on the stress distribution, displacement, and fracture resistance of upper human premolars. For this in vitro test, 35 intact upper premolars (UPM) were selected and five were kept intact for the co...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/13-092-L

    authors: Costa A,Xavier T,Noritomi P,Saavedra G,Borges A

    更新日期:2014-07-01 00:00:00

  • Fit of veneers made by CAD-CAM and platinum foil methods.

    abstract::Veneers were fabricated by CEREC CAD-CAM and the platinum foil techniques for standardized preparations on 10 artificial teeth. Mesial preparation contacts were broken, but distal contacts remained intact. The veneers were cemented in a standardized manner to their teeth. The veneers and their attached cement were emb...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Suh PS,Johnson R,White SN

    更新日期:1997-05-01 00:00:00

  • Impact of Silane-containing Universal Adhesive on the Biaxial Flexural Strength of a Resin Cement/Glass-ceramic System.

    abstract::The aim of this study was to determine whether using a silane-containing universal adhesive as a silane primer in glass-ceramic/resin cement systems affects biaxial flexural strength (BFS) and bonded interface integrity after loading. Glass-ceramic (IPS e.max CAD, Ivoclar/Vivadent, Schaan, Liechtenstein) disc-shaped s...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/17-356-L

    authors: Murillo-Gómez F,Wanderley RB,De Goes MF

    更新日期:2019-03-01 00:00:00

  • Tooth regeneration in operative dentistry.

    abstract::For many years, operative dentistry has been using regenerative approaches to treat dental disease. The use of calcium hydroxide to stimulate reparative or reactionary dentin is clearly an example of such a therapeutic strategy. The advent of tissue engineering is allowing dentistry to move forward in the use of regen...

    journal_title:Operative dentistry

    pub_type: 杂志文章,评审

    doi:10.2341/06-000

    authors: Nör JE

    更新日期:2006-11-01 00:00:00