Abstract:
:The present in vitro study concerns determination of the pre-cementation gap width of all-ceramic crowns made using an in-office digital-impression technique and subsequent computer-aided design/computer-aided manufacturing (CAD/CAM) production. Two chairside video camera systems were used: the Lava Oral scanner and Cadent's iTero scanner. Digital scans were made of a first molar typodont tooth that was suitably prepared for an all-ceramic crown. The digital impressions were sent via the Internet to commercial dental laboratories, where the crowns were made. Also, an impression of the typodont tooth was made, poured, and scanned in order to evaluate the pre-cementation gap of crowns produced from scanning stone dies. These methods and systems were evaluated by creating replicas of the intermediate space using an addition-cured silicone, and the gap widths were determined using a measuring microscope. Hot-pressed leucite-reinforced glass-ceramic crowns were selected as a reference. The mean value for the marginal measuring points of the control was 170 μm, and the values for all the evaluated crowns ranged from 107 to 128 μm. Corresponding figures for the internal measuring points were 141-210 μm and 115-237 μm, respectively. Based on the findings in the present study, an in-office digital-impression technique can be used to fabricate CAD/CAM ceramic single crowns with a marginal and internal accuracy that is on the same level as that of a conventional hot-pressed glass-ceramic crown. In the present study, however, slight differences could be seen between the two types of ceramic crowns studied with respect to the internal fit obtained.
journal_name
Oper Dentjournal_title
Operative dentistryauthors
Tidehag P,Ottosson K,Sjögren Gdoi
10.2341/12-309-Lsubject
Has Abstractpub_date
2014-05-01 00:00:00pages
308-16issue
3eissn
0361-7734issn
1559-2863journal_volume
39pub_type
杂志文章abstract::A fundamental issue of restorative treatment is assessing the different conditions of cases not only from tooth-to-tooth but also from the activity of each caries lesion and the size of the cavity. In addition, restorative treatment is sometimes carried out for prosthetic and cosmetic purposes and involves cutting sou...
journal_title:Operative dentistry
pub_type:
doi:
更新日期:2002-05-01 00:00:00
abstract::A literature review was conducted on adhesive Class I and II restorations and nondestructive in vitro tests using the PubMed/Medline database for the 1995-2010 period. The first part of this review has presented and critically appraised selected literature dealing with the quality and in vitro behavior of adhesive Cla...
journal_title:Operative dentistry
pub_type: 杂志文章,评审
doi:10.2341/12-020B-LIT
更新日期:2013-09-01 00:00:00
abstract::On occasion we receive manuscripts that we would like to publish, but do not have the page room to include in the print journal. For the full article, please go to www.jopdentonline.org or enter the provided address into your address bar. ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/1559-2863-43.3.335
更新日期:2018-05-01 00:00:00
abstract:PURPOSE:This study evaluated the effect of thermocycling on the microtensile bond strength of four adhesive luting agents to GN-I CAD-CAM ceramic. The hypothesis tested was that thermocycling did not affect bonding effectiveness, irrespective of the luting agents used. MATERIALS AND METHODS:Ceramic specimens of two di...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/06-106
更新日期:2007-07-01 00:00:00
abstract::The nature of the hybrid layer (HL) following chemical treatment has not been resolved. The effects of chemical treatments and polishing on HL morphology and composition were investigated using micro-Raman spectroscopy and SEM. Polished and unpolished SingleBond adhesive/dentin (a/d) interfaces from the same tooth wer...
journal_title:Operative dentistry
pub_type: 临床试验,杂志文章,随机对照试验
doi:
更新日期:2004-11-01 00:00:00
abstract::The current study compared the marginal adaptation of Class II open-sandwich restorations with a RMGIC versus a dual-cure composite as dentin substitute. Class II cavities were prepared on 50 extracted human third molars. The teeth were randomly assigned to two groups of 25 teeth to compare one dual cure composite (Mu...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/08-29
更新日期:2009-03-01 00:00:00
abstract::This investigation evaluated the stabilizing effect of glass fiber reinforced posts (FRP) luted with self-adhesive universal cement on the fracture resistance of excessively flared endodontically treated teeth (ETT). Values were compared to teeth with no ferrule, 2 mm ferrule and resin cement for luting with 2 mm ferr...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/05-142
更新日期:2006-11-01 00:00:00
abstract::Of the many factors under their control, clinicians can manipulate light-exposure duration but must deal with a set intensity of light emitted from the dental curing unit. This research investigates the interdependence of exposure duration and source intensity on resin cure at various depths within a simulated light-c...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1994-01-01 00:00:00
abstract::This study evaluated (1) the effect of known reductions in the output of curing lights on the depth of cure of various resins as determined by hardness measurements, and (2) the ability of the clinician to detect reduced light output by use of an explorer to compare the hardness of the top and bottom surfaces of resin...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1994-03-01 00:00:00
abstract:OBJECTIVE:The purpose of this study was to evaluate surface finish and gloss of a two-step composite finishing/polishing (F/P) disc system compared with two multistep systems on five composites. METHODS:Seventy-five disc-shaped composite specimens (D=10.0 mm, 2 mm thick, n=15 per composite) were made of microfill (Dur...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/10-162-L
更新日期:2011-03-01 00:00:00
abstract::This in vitro study evaluated the amount of fluoride released from fluoride-containing materials over a period of 28 days. Six disk samples (2.06 +/- 0.06 cm2) were prepared of each material and divided at random into seven groups: Group 1: Chelon-Fil; Group 2: Chelon-Silver; Group 3: VariGlass; Group 4: Dyract; Group...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1996-09-01 00:00:00
abstract:PURPOSE:To investigate the effect of different light exposure times, shades, and thicknesses on the depth of cure (DOC) of bulk fill composites. METHODS AND MATERIALS:Two bulk fill composites, Tetric EvoCeram Bulk Fill (TBF) and Sonic Fill (SF), and a conventional composite, Filtek Supreme Ultra (FSU), were evaluated....
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/16-057-L
更新日期:2017-09-01 00:00:00
abstract::This study tested the null hypothesis that there no difference between two-step and one-step self-etch adhesives in their compatibility with these composites. The microtensile bond strengths (microTBS) of two two-step systems (Clearfil SE Bond, Kuraray and Tyrian SPE/One-Step Plus, BISCO) were compared with two one-st...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2003-11-01 00:00:00
abstract:OBJECTIVE:The aim of this study was to evaluate the two-year clinical performance of Class III, IV, and V composite restorations using a two-step etch-and-rinse adhesive system (2-ERA) and three one-step self-etching adhesive systems (1-SEAs). MATERIAL AND METHODS:Two hundred Class III, IV, and V composite restoration...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/11-397-C
更新日期:2013-05-01 00:00:00
abstract:OBJECTIVE:The purpose of this study was to evaluate the strengthening effect of resin composite, cured by a modified layering protocol, for teeth with simulated coronal fracture and weakened immature roots. METHODS:Fifty maxillary teeth were decoronated and their apices sectioned to standardize the length to 12 mm. Pr...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/12-525L
更新日期:2014-05-01 00:00:00
abstract::This study evaluated the shear bond strength of repairs made with a composite (Herculite/Kerr) when two different surface treatment methods and two new generation bond materials were used. The bonding surfaces were prepared by sanding with 500-grit aluminum oxide sandpaper or air abrading with 25-micron aluminum oxide...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2003-03-01 00:00:00
abstract::This in vitro study evaluated the wear resistance of resin composite polymerized using four different light-curing systems. For this, a well-defined cylindrical cavity preparation (4.0 mm in diameter x 3.0 mm in depth) was made in a ceramic block (n=4 per material/light condition). Uncured material, either a universal...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2002-07-01 00:00:00
abstract::This in vitro study investigated the possible dehydration of dentin caused by bleaching agents. Furthermore, it tested whether protective dentin varnishes can maintain the physiological moisture of dentin during bleaching treatment. Fifty-five standardized dentin cylinders were prepared from freshly extracted bovine i...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/05-89
更新日期:2006-09-01 00:00:00
abstract:OBJECTIVES:It has been reported that bleaching generates an increase in the activity of osteoclasts in vitro. We quantified the RANK-L and IL-1β biomarkers in a double-blind, randomized clinical trial evaluating the in vivo effect of hydrogen peroxide (35%) and peroxide carbamide (37%) six months after whitening. METH...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/18-023-C
更新日期:2019-11-01 00:00:00
abstract:OBJECTIVES:This study investigated cuspal deformation in teeth restored with different types of adhesive materials with and without a base. METHODS:Mesio-occluso-distal slot cavities of moderately large dimension were prepared on extracted maxillary premolars (n=24). Teeth were assigned to one of four groups and resto...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/14-331-L
更新日期:2016-03-01 00:00:00
abstract:OBJECTIVES:People increasingly desire tooth whitening. Considering the wide range of whitening products on the market, this study evaluated the efficacy of whitening toothpastes and mouth rinses compared with the 10% carbamide peroxide (CP) whitening gel. METHODS:We obtained 120 cylindrical specimens from bovine teeth...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/11-360-L
更新日期:2013-01-01 00:00:00
abstract::The antibacterial effects of the dentin bonding systems Syntac, ProBOND, Gluma 3-Step, the resin-modified glass ionomers Photac-Fil, Fuji Lining LC, Fuji II LC, and the polyacid-modified composite resins VariGlass, Geristore, and Infinity were evaluated using the cariogenic bacteria S mutans, L salivarius, S sobrinus,...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1996-11-01 00:00:00
abstract:OBJECTIVES:This study investigated the influence of resin composite preheating temperature, light curing regimen (mode and duration) on post-gel shrinkage strain (PGSS) and degree of conversion (DC) of a restorative resin composite. METHODS:A hybrid resin composite preheated to three different temperatures (37 degrees...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/09-072-L
更新日期:2010-03-01 00:00:00
abstract::The aim of this review was to compile recent evidence related to nanofilled resin composite materials regarding the properties and clinical performance. Special attention was given to mechanical properties, such as strength, hardness, abrasive wear, water sorption, and solubility. The clinical performance of nanocompo...
journal_title:Operative dentistry
pub_type: 杂志文章,评审
doi:10.2341/17-208-T
更新日期:2018-07-01 00:00:00
abstract::This study investigated the influence of curing lights and modes on the cross-link density of dental composites. Four LED/halogen curing lights (LED-Elipar Freelight [FL], 3M-ESPE and GC e-light [EL], GC; high intensity halogen-Elipar Trilight [TL], 3M-ESPE; very high intensity halogen-Astralis 10 [AS], Ivoclar Vivade...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2004-07-01 00:00:00
abstract::One hundred non-carious, non-undercut cervical lesions were restored with Silux Plus or Estio LC and bonded with Fuji Bond LC. The restorations were evaluated yearly for retention and marginal discoloration. After five years, the overall retention rate was 96%. Of the 41 restorations examined at five years, five had c...
journal_title:Operative dentistry
pub_type: 临床试验,杂志文章
doi:
更新日期:2002-09-01 00:00:00
abstract:OBJECTIVES:This study evaluated the bond strength of luting systems for bonding glass fiber posts to root canal dentin. The hypothesis tested was that there are no differences in bond strength of glass fiber posts luted with different cement systems. METHODS:Forty bovine incisors were randomly assigned to five differe...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/11-035-L
更新日期:2012-01-01 00:00:00
abstract:CLINICAL RELEVANCE:When a resin nanoceramic inlay is cemented using self-adhesive cement, a universal dentin adhesive can be applied to the prepared cavity. The application of the adhesive before self-adhesive cement placement provides similar or better interfacial adaptation than without the adhesive. SUMMARY:Purpose...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/19-141-L
更新日期:2020-11-01 00:00:00
abstract::The present clinical case report describes the clinical steps of enamel microabrasion associated with dental bleaching to restore severely-pitted fluorosed teeth. The process of removing the fluorotic superficial stains started by using macroabrasion with a water-cooled fine tapered 3195 FF diamond bur. Rubber dam iso...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/18-116-T
更新日期:2019-11-01 00:00:00
abstract::Four resin based materials (Compolute Aplicap, ESPE; Variolink Ultra, Vivadent; C&B Metabond, Parkell and Panavia 21, Kuraray), two carboxylate cements (Poly-F Plus, Dentsply DeTrey and Durelon Maxicap, ESPE), two glass-ionomer cements (Fuji I, GC and Ketac-Cem Aplicap, ESPE), one resin-modified glass ionomer cement (...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2000-11-01 00:00:00