In vitro performance of Class I and II composite restorations: a literature review on nondestructive laboratory trials--part II.

Abstract:

:A literature review was conducted on adhesive Class I and II restorations and nondestructive in vitro tests using the PubMed/Medline database for the 1995-2010 period. The first part of this review has presented and critically appraised selected literature dealing with the quality and in vitro behavior of adhesive Class II restorations using photoelasticity, finite element analysis, and microleakage study protocols. This second part reviews additional parameters, which are deformation and fracture resistance to cyclic loading, shrinkage stress and tooth deformation following restoration placement, bond strength (microtensile, tensile, and shear tests), and marginal and internal adaptation. In addition, a "relevance score" has been proposed that aims to classify the different study protocols according, firstly, to the resulting quality, quantity, and consistency of the evidence and then, secondly, to their potential clinical relevance, as estimated by their ability to simulate oral and biomechanical strains. The highest clinical relevance was attributed to marginal and internal adaptation studies, following cyclic loading in a moist environement. However, a combination of in vitro protocols will have an even greater predictive potential and has to be considered as a crucial preclinical research approach with which to investigate the numerous restorative configurations that cannot be efficiently and rapidly tested in vivo.

journal_name

Oper Dent

journal_title

Operative dentistry

authors

Dietschi D,Argente A,Krejci I,Mandikos M

doi

10.2341/12-020B-LIT

subject

Has Abstract

pub_date

2013-09-01 00:00:00

pages

E182-200

issue

5

eissn

0361-7734

issn

1559-2863

journal_volume

38

pub_type

杂志文章,评审
  • Clinical comparison of bur- and laser-prepared minimally invasive occlusal resin composite restorations: two-year follow-up.

    abstract::This study evaluated the two-year clinical performance of two minimally invasive cavity preparation techniques, bur and laser, in Class I occlusal resin composite restorations. Twenty-seven patients, each having at least one pair of occlusal caries, were enrolled in this study. For each patient, one of the cavities wa...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/09-339-C

    authors: Yazici AR,Baseren M,Gorucu J

    更新日期:2010-09-01 00:00:00

  • Pulpal response to a new light-cured composite placed in etched glass-ionomer lined cavities.

    abstract::This study evaluated the pulp biocompatability of a new light-cured composite resin which was placed in etched glass-ionomer-lined cavities of monkey teeth. The pulpal response to this material was less than that to zinc-oxide eugenol cement in each observation period. Therefore this material seems to meet acceptable ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Hosoda H,Inokoshi S,Shimada Y,Harnirattisai C,Otsuki M

    更新日期:1991-07-01 00:00:00

  • Effect of dual cure composite as dentin substitute on marginal integrity of class II open-sandwich restorations.

    abstract::The current study compared the marginal adaptation of Class II open-sandwich restorations with a RMGIC versus a dual-cure composite as dentin substitute. Class II cavities were prepared on 50 extracted human third molars. The teeth were randomly assigned to two groups of 25 teeth to compare one dual cure composite (Mu...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/08-29

    authors: Koubi S,Raskin A,Dejou J,About I,Tassery H,Camps J,Proust JP

    更新日期:2009-03-01 00:00:00

  • Microleakage of compomer restorations in primary teeth after preparation with bur or air abrasion.

    abstract::This study compared the degree of marginal leakage of a compomer in Class V cavities of human primary molars prepared by a conventional dental bur and air abrasion with or without acid etching. Fifty-six non-carious extracted primary molars were randomly divided into four groups (n=14) to be prepared by four technique...

    journal_title:Operative dentistry

    pub_type: 临床试验,杂志文章,随机对照试验

    doi:

    authors: Aysegül O,Nurhan O,Haluk B,Dilek T

    更新日期:2005-03-01 00:00:00

  • Factors associated with microleakage in Class II resin composite restorations.

    abstract::This in vitro study investigated the correlation between factors related to cavosurface marginal adaptation and microleakage in Class II cavities restored with a light- or chemical-activated resin composite. Standardized cavities were prepared in 40 molars that were randomly divided between both materials. Each of the...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/06-16

    authors: Idriss S,Abduljabbar T,Habib C,Omar R

    更新日期:2007-01-01 00:00:00

  • Amelogenesis imperfecta: a conservative and progressive adhesive treatment concept.

    abstract:OBJECTIVE:The aim of this study was to present a case report of a patient affected by amelogenesis imperfecta showing a possible minimal and conservative adhesive treatment approach. CLINICAL PROCEDURE:A treatment philosophy of amelogenesis imperfecta is illustrated by means of a case report of a 14-year-old boy who c...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/11-437-S

    authors: Ardu S,Duc O,Krejci I,Perroud R

    更新日期:2013-05-01 00:00:00

  • Restoration of Severely Compromised Teeth With Modern Operative Techniques.

    abstract::This case report illustrates how to restore severely compromised teeth with direct composite restorations. The size of the restorations presented is often considered by dentists as being a contraindication for direct composites. Hence, the technique is explained step by step, addressing the crucial points. ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/15-001-T

    authors: Lenhard M

    更新日期:2016-09-01 00:00:00

  • An in vitro comparison of different cementation strategies on the pull-out strength of a glass fiber post.

    abstract:PURPOSE:To evaluate the effect of different strategies for post cementation on the pullout bond strength of a double-tapered glass fiber post cemented into a root canal. MATERIALS AND METHODS:The root canals of 70 single-rooted bovine teeth (16 mm-length) were prepared to 9 mm using the preparation drill of a double-t...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/08-113

    authors: Amaral M,Santini MF,Wandscher V,Amaral R,Valandro LF

    更新日期:2009-07-01 00:00:00

  • Effects of carbamide peroxide on the staining susceptibility of tooth-colored restorative materials.

    abstract::This study investigated the effects of an at-home bleaching gel containing 15% carbamide peroxide on the susceptibility of tooth-colored restorative materials to different staining solutions. The tooth-colored restoratives used in this study were a nano resin composite (Filtek Z350), a packable resin composite (Filtek...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/08-42

    authors: Yu H,Pan X,Lin Y,Li Q,Hussain M,Wang Y

    更新日期:2009-01-01 00:00:00

  • The effect of sandblasting and different primers on shear bond strength between yttria-tetragonal zirconia polycrystal ceramic and a self-adhesive resin cement.

    abstract:PURPOSE:To evaluate the effect of zirconia primers, air-abrasion, and tribochemical surface treatment methods on the shear bond strength between yttria-tetragonal zirconia polycrystal (Y-TZP) ceramic and self-adhesive resin cement. METHODS AND MATERIALS:Y-TZP ceramic surfaces were ground flat with 600-grit silicon car...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/13-149-L

    authors: Yi YA,Ahn JS,Park YJ,Jun SH,Lee IB,Cho BH,Son HH,Seo DG

    更新日期:2015-01-01 00:00:00

  • Antibacterial activity of dentin bonding systems, resin-modified glass ionomers, and polyacid-modified composite resins.

    abstract::The antibacterial effects of the dentin bonding systems Syntac, ProBOND, Gluma 3-Step, the resin-modified glass ionomers Photac-Fil, Fuji Lining LC, Fuji II LC, and the polyacid-modified composite resins VariGlass, Geristore, and Infinity were evaluated using the cariogenic bacteria S mutans, L salivarius, S sobrinus,...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Meiers JC,Miller GA

    更新日期:1996-11-01 00:00:00

  • Effect of power density on shrinkage of dental resin materials.

    abstract::This study compares volumetric changes and rates of shrinkage during different stages of polymerization of dental resin composites and compomers exposed to the same total energy by using two different combinations of power density and exposure duration. A hybrid composite and its equivalent flowable and a compomer and...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Oberholzer TG,Pameijer CH,Grobler SR,Rossouw RJ

    更新日期:2003-09-01 00:00:00

  • Comparison of two-step versus four-step composite finishing/polishing disc systems: evaluation of a new two-step composite polishing disc system.

    abstract:OBJECTIVE:The purpose of this study was to evaluate surface finish and gloss of a two-step composite finishing/polishing (F/P) disc system compared with two multistep systems on five composites. METHODS:Seventy-five disc-shaped composite specimens (D=10.0 mm, 2 mm thick, n=15 per composite) were made of microfill (Dur...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/10-162-L

    authors: da Costa JB,Goncalves F,Ferracane JL

    更新日期:2011-03-01 00:00:00

  • Cracked tooth syndrome in an unrestored maxillary premolar: a case report.

    abstract::Cracked tooth syndrome is known to occur most frequently in heavily restored teeth. Nevertheless, when the symptoms occur in intact teeth, there is difficulty in obtaining a correct diagnosis because it is difficult for the dentist to find where the crack is located. This clinical report describes the diagnostic proce...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/13-257

    authors: Batalha-Silva S,Gondo R,Stolf SC,Baratieri LN

    更新日期:2014-09-01 00:00:00

  • Effect of Minocycline on the Durability of Dentin Bonding Produced with Etch-and-Rinse Adhesives.

    abstract:OBJECTIVES:To evaluate the effect of minocycline and chlorhexidine pretreatment of acid-etched dentin on the longevity of resin-dentin bond strength (μTBS) and nanoleakage of two-step etch-and-rinse adhesives. METHODS:Before application of Prime & Bond NT and Adper Single Bond 2 in occlusal dentin, the dentin surfaces...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/15-023-L

    authors: Loguercio AD,Stanislawczuk R,Malaquias P,Gutierrez MF,Bauer J,Reis A

    更新日期:2016-09-01 00:00:00

  • Influence of Conditioning Time of Universal Adhesives on Adhesive Properties and Enamel-Etching Pattern.

    abstract:OBJECTIVES:To evaluate the effect of application protocol in resin-enamel microshear bond strength (μSBS), in situ degree of conversion, and etching pattern of three universal adhesive systems. METHODS AND MATERIALS:Sixty-three extracted third molars were sectioned in four parts (buccal, lingual, and proximals) and di...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/15-213-L

    authors: Cardenas AM,Siqueira F,Rocha J,Szesz AL,Anwar M,El-Askary F,Reis A,Loguercio A

    更新日期:2016-09-01 00:00:00

  • The influence of elastic modulus of inlay materials on stress distribution and fracture of premolars.

    abstract::SUMMARY The purpose of this study was to evaluate the influence the width of the occlusal isthmus and inlay material had on the stress distribution, displacement, and fracture resistance of upper human premolars. For this in vitro test, 35 intact upper premolars (UPM) were selected and five were kept intact for the co...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/13-092-L

    authors: Costa A,Xavier T,Noritomi P,Saavedra G,Borges A

    更新日期:2014-07-01 00:00:00

  • Establishing proximal contacts with pre-polymerized composite inserts.

    abstract::A technique of restoring Class II posterior restorations with resin-based composite and a pre-polymerized composite insert was presented. This technique is intended to aid the practitioner in obtaining tight, broad, proximal contacts without having to purchase special instruments or materials. This method is not time-...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Dunn WJ

    更新日期:2004-07-01 00:00:00

  • Degree of conversion of luting resins around ceramic inlays in natural deep cavities: a micro-Raman spectroscopy analysis.

    abstract::This study evaluated the degree of conversion (%DC) of luting agents around ceramic inlays placed in deep natural cavities. Thirty-six cylindrical Class I cavities (diameter = 4 mm, depth = 4 mm) were prepared in freshly extracted human teeth and randomly divided according to the luting materials used for luting CAD/C...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/10-012-L

    authors: Lohbauer U,Pelka M,Belli R,Schmitt J,Mocker E,Jandt KD,Müller FA

    更新日期:2010-09-01 00:00:00

  • The influence of surface standardization of lithium disilicate glass ceramic on bond strength to a dual resin cement.

    abstract::In vitro studies to assess bond strength between resins and ceramics have used surfaces that have been ground flat to ensure standardization; however, in patients, ceramic surfaces are irregular. The effect of a polished and unpolished ceramic on bond strength needs to be investigated. Sixty ceramic specimens (20×5×2 ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/11-009-L

    authors: Brum R,Mazur R,Almeida J,Borges G,Caldas D

    更新日期:2011-09-01 00:00:00

  • Impact of Recently Developed Universal Adhesives on Tensile Bond Strength to Computer-aided Design/Manufacturing Ceramics.

    abstract:OBJECTIVES:The aim of this investigation was to test the tensile bond strength (TBS) between different computer-aided-design/manufacturing (CAD/CAM) ceramics after conditioning using different universal adhesive systems and resin composite cement. METHODS AND MATERIALS:Substrates of four CAD/CAM ceramics-1) VITABLOCS ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/18-017-L

    authors: Liebermann A,Detzer J,Stawarczyk B

    更新日期:2019-07-01 00:00:00

  • Effect of fractured or sectioned fragments on the fracture strength of different reattachment techniques.

    abstract::This study evaluated the effect of fractured or sectioned fragments on the fracture strength recovery of four techniques used for reattachment and resin composite buildups. Ninety-one sound, permanent lower central incisors were used. Half the teeth were fractured in the incisal-proximal edge; the other half had the i...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Loguercio AD,Mengarda J,Amaral R,Kraul A,Reis A

    更新日期:2004-05-01 00:00:00

  • Bond strength of glass ionomers to coronal and radicular dentin.

    abstract::A study was conducted to compare the shear bond strength of a glass-ionomer cement and glass-ionomer base to coronal and radicular dentin. Two different glass ionomers were bonded to paired coronal and radicular human dentin surfaces that had received no surface treatment or had been treated passively for 20 seconds w...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Berry EA 3rd,Powers JM

    更新日期:1994-07-01 00:00:00

  • Influence of curing methods and matrix type on the marginal seal of class II resin-based composite restorations in vitro.

    abstract::This study determined the influence of light curing protocols and matrix type on the margin quality and marginal seal of Class II resin-based composite restorations. In extracted human molars, box-shaped MOD cavities with 1 mm wide interproximal bevels were prepared with cervical margins located at least 1 mm coronal ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/04-194

    authors: Hofmann N,Hunecke A

    更新日期:2006-01-01 00:00:00

  • Adherence of plaque components to different restorative materials.

    abstract::This study compared the amount of artificial plaque synthesized in vitro by Streptococcus sobrinus on various dental materials using radioisotopes. In particular, plaque-retaining capacities of new types of ceramics were the focus of this study. Specimens were fabricated from the following materials (one amalgam alloy...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Kawai K,Urano M

    更新日期:2001-07-01 00:00:00

  • Caries-preventive activity of fluoride-containing resin-based desensitizers.

    abstract:OBJECTIVE:The purpose of this study was to evaluate the effects of different desensitizing agents on the prevention of root caries when applied to root surfaces. MATERIALS AND METHODS:Thirty human roots were sectioned into quarters with a 3 × 4 mm window. A desensitizer (VX, Clinpro™ XT Varnish; SP, Seal & Protect®; o...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/11-007-L

    authors: Sohn S,Yi K,Son HH,Chang J

    更新日期:2012-05-01 00:00:00

  • Treatment of Dentin Hypersensitivity Using Nano-Hydroxyapatite Pastes: A Randomized Three-Month Clinical Trial.

    abstract:OBJECTIVES:This randomized clinical trial tested the three-month desensitizing effect of two protocols using nano-hydroxyapatite formulations compared with Pro-Argin and fluoride varnish. METHODS:Twenty-eight subjects with 137 teeth presenting dentin exposure with a minimal hypersensitivity of four on the visual analo...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/15-145-C

    authors: Wang L,Magalhães AC,Francisconi-Dos-Rios LF,Calabria MP,Araújo D,Buzalaf M,Lauris J,Pereira JC

    更新日期:2016-07-01 00:00:00

  • The effect of various surface coatings on fluoride release from glass-ionomer cement.

    abstract::To protect glass-ionomer cement from moisture contamination and dehydration during initial setting, immediate application of a surface coating agent is recommended. This study compared the effect of various surface coatings on F release from glass-ionomer cement. Twenty glass-ionomer cement (Ketac Fil Aplicap) disks (...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Castro GW,Gray SE,Buikema DJ,Reagan SE

    更新日期:1994-09-01 00:00:00

  • Dentin permeability: sealing the dentin in crown preparations.

    abstract::Provisional restorations of full crown preparations may permit more microleakage of bacteria and their products than the final castings do. However, most investigations of the sealing qualities of cemented castings have reported that they too permit dye leakage. One approach to the problem is to seal the dentin with d...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Pashley EL,Comer RW,Simpson MD,Horner JA,Pashley DH,Caughman WF

    更新日期:1992-01-01 00:00:00

  • Multidisciplinary Treatment of Complicated Crown-Root Fractures: A Case Study.

    abstract::Traumatic dental injuries usually occur among children and adolescents, with maxillary central incisors as the most often affected teeth. Complicated crown-root fractures are particularly challenging for esthetic and functional rehabilitation and often require a multidisciplinary approach. A 21-year-old male patient c...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/15-080-T

    authors: Stojanac IL,Bajkin BV,Premovic MT,Ramic BD,Petrovic LM

    更新日期:2016-11-01 00:00:00