Abstract：
OBJECTIVES:To evaluate the effect of minocycline and chlorhexidine pretreatment of acid-etched dentin on the longevity of resin-dentin bond strength (μTBS) and nanoleakage of two-step etch-and-rinse adhesives. METHODS:Before application of Prime & Bond NT and Adper Single Bond 2 in occlusal dentin, the dentin surfaces were treated with 37% phosphoric acid, rinsed, air-dried, and rewetted with water (control group), 2% minocycline, or 2% chlorexidine digluconate. Composite buildups were constructed incrementally, and specimens were longitudinally sectioned to obtain bonded sticks (0.8 mm2) to be tested in tension (0.5 mm/min) immediately or after 24 months of water storage. For nanoleakage, two specimens of each tooth/period were immersed in the silver nitrate solution, photo-developed, and polished with SiC paper for analysis under energy-dispersive X-ray spectroscopy/scanning electron microscopy. RESULTS:Reductions of the μTBS and increases in the nanoleakage were observed for both adhesives when the rewetting procedure was performed with water. Stable bonds were observed for the 2% minocycline and 2% chlorexidine digluconate groups after 24 months. CONCLUSIONS:The use of 2% minocycline as pretreatment of acid-etched dentin is one alternative to retard the degradation of resin-dentin interfaces over a 24-month period as well as 2% chlorexidine digluconate.
journal_name
Oper Dentjournal_title
Operative dentistryauthors
Loguercio AD,Stanislawczuk R,Malaquias P,Gutierrez MF,Bauer J,Reis Adoi
10.2341/15-023-Lsubject
Has Abstractpub_date
2016-09-01 00:00:00pages
511-519issue
5eissn
0361-7734issn
1559-2863journal_volume
41pub_type
杂志文章abstract：:This research investigated the effects of wet and dry conditions of phosphoric acid etched dentin on resin bonding and determined the optimum moisture condition for resin bonding using an ethanol-based one-bottle adhesive system. Bovine dentin surfaces were etched with 35% phosphoric acid and rinsed with water. Under ...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：2002-11-01 00:00:00
abstract：:A fundamental issue of restorative treatment is assessing the different conditions of cases not only from tooth-to-tooth but also from the activity of each caries lesion and the size of the cavity. In addition, restorative treatment is sometimes carried out for prosthetic and cosmetic purposes and involves cutting sou...
journal_title：Operative dentistry
pub_type：
doi：
更新日期：2002-05-01 00:00:00
abstract：OBJECTIVES:To evaluate the effect of different surface treatments on the bond strength to a composite and a polymer-infiltrated ceramic CAD/CAM block after six-month artificial aging. METHODS AND MATERIALS:Two types of CAD/CAM blocks (Cerasmart, GC; Enamic, Vita Zahnfabrik) were cut in slabs of 4-mm thickness, divided...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/15-263-L
更新日期：2017-01-01 00:00:00
abstract：:The purpose of this study was to determine if air thinning three dentin adhesives would affect bond strength to dentin. Ninety human molars were mounted in acrylic and the occlusal surfaces ground to expose a flat dentin surface. Thirty teeth were randomly assigned to one of the following dentin bonding agent/composit...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1995-07-01 00:00:00
abstract：:V-shaped cervical cavities prepared in monkey teeth were restored with several dentin bonding systems, and the in vivo resin-dentin interfacial structures were observed under the scanning electron microscope using an argon-ion etching technique. The hybrid layer could be clearly observed; its depth was dependent on th...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1995-09-01 00:00:00
abstract：:The aim of this study was to compare five all-in-one bonding agents with respect to microleakage, microtensile bond strength (μTBS), degree of conversion (DC) and the impact of cavity configuration. The materials tested were Adper Easy Bond, Clearfil S3 Bond, iBond, Optibond All-in-One, Xeno IV, and Adper Single Bond ...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/14-185-LR1
更新日期：2015-09-01 00:00:00
abstract：:The development of adhesive agents for bonding composite to dentin has rapidly evolved in recent years. It is postulated that dentin bond strengths in the range of 17 MPa are sufficient to resist the polymerization shrinkage of composite resins. The purpose of this study was to evaluate the shear bond strengths of the...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1995-03-01 00:00:00
abstract：:The authors describe a minimally invasive procedure for occlusal rehabilitation in a young patient presenting with mild mandibular prognathism and loss of occlusal vertical dimension caused by dental erosion from chronic gastroesophageal reflux. ...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/09-110T
更新日期：2010-01-01 00:00:00
abstract：:Good wettability is one of the desirable physical properties of mercury-free gallium-based alloys (Gallium Alloy GF). However, wettability, while providing good adhesion to the cavity wall, has the adverse effect of causing stickiness to the inside of the capsule during mixing, and also to the metal hand instruments u...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1996-01-01 00:00:00
abstract：:This study compared the clinical performance of a polyacid-modified resin composite and a resin-modified glass-ionomer restorative material over two years. Thirty-four pairs of restorations of Compoglass and Fuji II LC were placed in caries-free cervical erosion/abfraction lesions without tooth preparation. Restoratio...
journal_title：Operative dentistry
pub_type： 临床试验,杂志文章,随机对照试验
doi：
更新日期：2001-01-01 00:00:00
abstract：:This study evaluated the regional tensile bond strength of a dual-cure resin composite core material to root canal dentin using photo and dual-cure adhesives and different modes of polymerization. Nineteen extracted premolars were decoronated and their root canals prepared to a depth of 8 mm and a width of 1.4 mm usin...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：2003-09-01 00:00:00
abstract：:The purpose of this study was to determine if the actual concentration of bleaching agents available in four different countries were the same as the label indicated and within the recommendations of the International Standard on Tooth Whitening. The method recommended for assaying peroxide by the United States Pharma...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/11-367-L
更新日期：2013-05-01 00:00:00
abstract：:The bulk-filling of deep, wide dental cavities is faster and easier than traditional incremental restoration. However, the extent of cure at the bottom of the restoration should be carefully examined in combination with the polymerization contraction and gap formation that occur during the restorative procedure. The a...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/13-324-L
更新日期：2015-03-01 00:00:00
abstract：OBJECTIVES:Whitening efficacy has been related to hydrogen peroxide (HP) diffusion into tooth structure. However, little information is available relating rheological properties to whitening efficacy. The purpose was to evaluate the whitening efficacy and HP penetration level of a 10% HP gel at three different viscosit...
journal_title：Operative dentistry
pub_type： 杂志文章,随机对照试验
doi：10.2341/17-099-L
更新日期：2018-05-01 00:00:00
abstract：OBJECTIVE::The study aimed to evaluate teaching trends and use of materials in direct posterior restorations during a 13-year period in an Israeli dental school. METHODS::Data registered in computerized files, relating to posterior restorations performed in the student clinic during the past 13 years (2004-2016), were...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/17-361-C
更新日期：2018-11-01 00:00:00
abstract：:This study investigated the effect of nonrinse conditioners (ie, Ketac Nano Primer [KNP] and GC Self Conditioner [SC]) used as substrate pretreatment and their respective paste-paste resin-modified glass-ionomer cement (RMGIC) (ie, Ketac Nano [KN] and Fuji Filling LC [FF]) on microtensile bond strength to dentin and m...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/14-030-L
更新日期：2015-05-01 00:00:00
abstract：:Excessive etching of the dentin may decrease bond strength because the adhesive may fail to completely infiltrate to the base of the over-etched demineralized collagen network. The purpose of the present study was to evaluate the influence of increasing etching times on the microtensile bond strength of Single Bond an...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1999-05-01 00:00:00
abstract：:The aim of the present study was to evaluate the effect of composite resin contamination with powdered and unpowdered latex gloves on the shear bond strength of etch-and-rinse and two-step self-etch adhesive systems. Standard flat dentin surfaces were prepared on the facial aspect of 120 bovine incisors and randomly a...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/11-088-L
更新日期：2012-09-01 00:00:00
abstract：:The reasons for placement and replacement and the longevity of amalgam restorations were recorded by 62 Italian private practitioners. The survey compiled 1935 amalgam restorations inserted due to primary caries (59%) and failed restorations (41%). The clinical diagnosis of secondary caries constituted 59% of failures...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1992-03-01 00:00:00
abstract：OBJECTIVES:This study investigated cuspal deformation in teeth restored with different types of adhesive materials with and without a base. METHODS:Mesio-occluso-distal slot cavities of moderately large dimension were prepared on extracted maxillary premolars (n=24). Teeth were assigned to one of four groups and resto...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/14-331-L
更新日期：2016-03-01 00:00:00
abstract：:The available and proposed methods for determining the in vivo occlusal wear values of classes 1 and 2 restorations made of resinfilled composite materials are critically reviewed. A methodology to be used to address the fundamental question of the link between the wear of the in vivo restorations and the relevant mec...
journal_title：Operative dentistry
pub_type： 杂志文章,评审
doi：
更新日期：1991-03-01 00:00:00
abstract：:This study was designed to compare strength, elastic modulus (stiffness), and hardness for five composite resin materials that are used for laboratory-fabricated posterior composite restorations. Ten specimens of each material were processed according to the manufacturer's instructions. Statistical analysis indicated ...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1994-11-01 00:00:00
abstract：:The effect of microabrasion on human enamel has been well documented; however, no information is available on its effect on dentin or restorative materials. The purpose of this study was to evaluate the effect of the microabrasion technique on the surface roughness of restorative materials and enamel and dentin surfac...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1996-03-01 00:00:00
abstract：OBJECTIVE:The aim of this study was to investigate the clinical performance and to validate the Lesion Activity Assessment (LAA) in conjunction with the International Caries Detection and Assessment System (ICDAS) for occlusal caries diagnosis in permanent teeth. METHODS:Patients with erupted or partially erupted thir...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/13-332-C
更新日期：2015-09-01 00:00:00
abstract：:This study compared the slice method of measuring microleakage to the whole-wall method. Forty-eight Class V direct metal restorations were placed in the buccal and lingual surfaces of 24 human molars. Following thermocycling and storage in 2% methylene blue stain for 12 hours, the teeth were sectioned and the restora...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：2002-11-01 00:00:00
abstract：:This article outlines an atraumatic isolation approach and a conservative instrumentation sequence, followed by use of a highly viscous, rapid-setting, capsulated glass ionomer cement to manage a difficult deep proximal-cervical Class V lesion. ...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：2004-05-01 00:00:00
abstract：CLINICAL RELEVANCE:Computer-aided design/computer-aided manufacturing (CAD/CAM) composite resins are susceptible to degradation by dietary solvents. Dietary counselling is prudent when placing such CAD/CAM restorations. SUMMARY:This study determined the effect of dietary solvents on the surface roughness (Ra) of direc...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/19-070-L
更新日期：2020-07-01 00:00:00
abstract：:This study evaluated the in vivo effects of bleaching agents containing 10% carbamide peroxide (Platinum/Colgate) or 7.5% hydrogen peroxide (Day White 2Z/Discus Dental) on mutans Streptococcus during dental bleaching. The products were applied on 30 volunteers who needed dental bleaching. In each volunteer, one of the...
journal_title：Operative dentistry
pub_type： 临床试验,杂志文章,随机对照试验
doi：
更新日期：2005-07-01 00:00:00
abstract：OBJECTIVE:The purpose of this study was to evaluate the effects of different desensitizing agents on the prevention of root caries when applied to root surfaces. MATERIALS AND METHODS:Thirty human roots were sectioned into quarters with a 3 × 4 mm window. A desensitizer (VX, Clinpro™ XT Varnish; SP, Seal & Protect®; o...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/11-007-L
更新日期：2012-05-01 00:00:00
abstract：:The purpose of this study was to find out the degree to which eugenol-containing temporary cements or temporary filling materials affected shear bond strength of a dual-cure resin luting cement to acid-etched enamel. For this purpose 56 human caries-free third molars were embedded in acrylic resin and cross sectioned ...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1998-03-01 00:00:00
