Abstract：
:The reasons for placement and replacement and the longevity of amalgam restorations were recorded by 62 Italian private practitioners. The survey compiled 1935 amalgam restorations inserted due to primary caries (59%) and failed restorations (41%). The clinical diagnosis of secondary caries constituted 59% of failures of amalgam restorations. The age of 46% of the restorations needing replacement was noted. The median longevity was 4.7 years.
journal_name
Oper Dentjournal_title
Operative dentistryauthors
Mjör IA,Toffenetti Fkeywords:
subject
Has Abstractpub_date
1992-03-01 00:00:00pages
70-3issue
2eissn
0361-7734issn
1559-2863journal_volume
17pub_type
杂志文章abstract：PURPOSE:To evaluate the effect of different strategies for post cementation on the pullout bond strength of a double-tapered glass fiber post cemented into a root canal. MATERIALS AND METHODS:The root canals of 70 single-rooted bovine teeth (16 mm-length) were prepared to 9 mm using the preparation drill of a double-t...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/08-113
更新日期：2009-07-01 00:00:00
abstract：:The present in vitro study concerns determination of the pre-cementation gap width of all-ceramic crowns made using an in-office digital-impression technique and subsequent computer-aided design/computer-aided manufacturing (CAD/CAM) production. Two chairside video camera systems were used: the Lava Oral scanner and C...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/12-309-L
更新日期：2014-05-01 00:00:00
abstract：:The purpose of this study was to compare the long-term survivals of two low-copper and three high-copper amalgam alloys, and to analyze four clinical factors for their possible effects on the restoration survivals. Some 1476 polished restorations were placed in hospital patients by a large number of operators and asse...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1991-09-01 00:00:00
abstract：OBJECTIVES:This study investigated the influence of resin composite preheating temperature, light curing regimen (mode and duration) on post-gel shrinkage strain (PGSS) and degree of conversion (DC) of a restorative resin composite. METHODS:A hybrid resin composite preheated to three different temperatures (37 degrees...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/09-072-L
更新日期：2010-03-01 00:00:00
abstract：:This study compared the degree of marginal leakage of a compomer in Class V cavities of human primary molars prepared by a conventional dental bur and air abrasion with or without acid etching. Fifty-six non-carious extracted primary molars were randomly divided into four groups (n=14) to be prepared by four technique...
journal_title：Operative dentistry
pub_type： 临床试验,杂志文章,随机对照试验
doi：
更新日期：2005-03-01 00:00:00
abstract：:This study compared the slice method of measuring microleakage to the whole-wall method. Forty-eight Class V direct metal restorations were placed in the buccal and lingual surfaces of 24 human molars. Following thermocycling and storage in 2% methylene blue stain for 12 hours, the teeth were sectioned and the restora...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：2002-11-01 00:00:00
abstract：:This study investigated the reasons for placement and replacement of dental restorations in the United States Navy Dental Corps. The relationship between restoration longevity and the reasons for replacement of restorations was also studied. Data on newly placed dental restorations were collected from restorative dent...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1993-09-01 00:00:00
abstract：:The purpose of this study was to determine if air thinning three dentin adhesives would affect bond strength to dentin. Ninety human molars were mounted in acrylic and the occlusal surfaces ground to expose a flat dentin surface. Thirty teeth were randomly assigned to one of the following dentin bonding agent/composit...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1995-07-01 00:00:00
abstract：OBJECTIVE:To evaluate, through the application of different dentin bonding systems, the influence of wetness on shear bond strength in enamel. METHODS:This study evaluated three etch-and-rinse adhesive systems (Scotchbond MP [used with and without primer]; Singlebond; and Prime&Bond 2.1) and two self-etching adhesive ...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/10-163-L
更新日期：2011-05-01 00:00:00
abstract：CLINICAL RELEVANCE:Pigments in tooth structures affect the diffusion of H2O2 through enamel and dentin. The bleaching methodology can be impacted. SUMMARY:Objective: The aim of this study was to evaluate the influence of the presence of pigments in tooth structures on the trans-enamel and trans-dentin diffusion of hyd...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/19-013-L
更新日期：2020-11-01 00:00:00
abstract：OBJECTIVES:To evaluate the effect of minocycline and chlorhexidine pretreatment of acid-etched dentin on the longevity of resin-dentin bond strength (μTBS) and nanoleakage of two-step etch-and-rinse adhesives. METHODS:Before application of Prime & Bond NT and Adper Single Bond 2 in occlusal dentin, the dentin surfaces...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/15-023-L
更新日期：2016-09-01 00:00:00
abstract：:This study compared the amount of artificial plaque synthesized in vitro by Streptococcus sobrinus on various dental materials using radioisotopes. In particular, plaque-retaining capacities of new types of ceramics were the focus of this study. Specimens were fabricated from the following materials (one amalgam alloy...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：2001-07-01 00:00:00
abstract：OBJECTIVE:This study evaluated the importance of enamel at the cervical margin for support and retention of a class II composite restoration in relation to fracture strength, fracture mode, and leakage. METHODS:Sixty-five newly extracted teeth were randomly divided into five groups. Within each group, standardized cla...
journal_title：Operative dentistry
pub_type： 杂志文章,随机对照试验
doi：10.2341/10-126-L
更新日期：2011-03-01 00:00:00
abstract：OBJECTIVES:To evaluate the clinical behavior of one-piece complete-coverage crowns and fixed partial dentures (FPDs) on teeth with vertical preparation without finish line biologically oriented preparation technique (BOPT). METHODS AND MATERIALS:This prospective study included 52 patients requiring treatment with rest...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/17-124-C
更新日期：2018-09-01 00:00:00
abstract：:The authors describe a minimally invasive procedure for occlusal rehabilitation in a young patient presenting with mild mandibular prognathism and loss of occlusal vertical dimension caused by dental erosion from chronic gastroesophageal reflux. ...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/09-110T
更新日期：2010-01-01 00:00:00
abstract：:Dentin bridging of 150 mechanically exposed monkey pulps to two adhesive resins [BondWell LC (BW); Clearfil Liner Bond II (LB)] and a calcium hydroxide cement [Dycal (DY)] were histopathologically evaluated at 3, 7, 14, 30, and 60 days after operation (n = 10). The dentin bridge structure was three-dimensionally recon...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：2000-05-01 00:00:00
abstract：OBJECTIVES::The use of high-viscosity glass-ionomer cements (HVGICs) for atraumatic restorative treatment (ART) restorations is widely practiced with the advent of various HVGICs. However, the bonding of the latter to caries-affected dentin (CAD) should be validated, especially because it is the common substrate left a...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/17-154-L
更新日期：2018-11-01 00:00:00
abstract：:Standardized class 4 cavities were prepared in bovine incisors and restored with a microfilled composite resin. The composite restorations were retained either by acid etching technique (AET) alone or by acid etching technique in combination with a self-threading retentive pin. Pins covered with a bonding/opaquer coat...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1994-05-01 00:00:00
abstract：OBJECTIVE:The aim of this study was to investigate the clinical performance and to validate the Lesion Activity Assessment (LAA) in conjunction with the International Caries Detection and Assessment System (ICDAS) for occlusal caries diagnosis in permanent teeth. METHODS:Patients with erupted or partially erupted thir...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/13-332-C
更新日期：2015-09-01 00:00:00
abstract：:Marginal adaptation to cylindrical dentin preparations of five commercially available dental composites--Charisma, Estelite, Herculite, Pertac, and Silux Plus--and seven experimental dental composites containing prepolymerized filler was evaluated by measurement of the wall-to-wall polymerization contraction gaps. The...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1997-11-01 00:00:00
abstract：:This study compared the clinical performance of a polyacid-modified resin composite and a resin-modified glass-ionomer restorative material over two years. Thirty-four pairs of restorations of Compoglass and Fuji II LC were placed in caries-free cervical erosion/abfraction lesions without tooth preparation. Restoratio...
journal_title：Operative dentistry
pub_type： 临床试验,杂志文章,随机对照试验
doi：
更新日期：2001-01-01 00:00:00
abstract：CLINICAL RELEVANCE:New dual-cure bulk-fill composites show promise for uniform degree of conversion and microhardness throughout the entire depth of direct restorations. SUMMARY: ...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/19-074-L
更新日期：2020-07-01 00:00:00
abstract：:Dental fluorosis is a developmental disturbance of enamel caused by excessive fluoride on ameloblasts during enamel formation. Patients often present to the dentist with a main goal of improving their esthetic appearance. This case report describes a minimally invasive technique for treating a severe case of enamel fl...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/12-238-S
更新日期：2013-07-01 00:00:00
abstract：:This study compares volumetric changes and rates of shrinkage during different stages of polymerization of dental resin composites and compomers exposed to the same total energy by using two different combinations of power density and exposure duration. A hybrid composite and its equivalent flowable and a compomer and...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：2003-09-01 00:00:00
abstract：:The aim of this investigation was to verify the influence of 3 light curing units on the degree of conversion, using different irradiation conditions: 1) manufacturers' recommended times of photo-activation, 2) standardizing total energy density among the units and 3) standardizing energy density at the 450-490 nm wav...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/05-81
更新日期：2006-07-01 00:00:00
abstract：:A technique of restoring Class II posterior restorations with resin-based composite and a pre-polymerized composite insert was presented. This technique is intended to aid the practitioner in obtaining tight, broad, proximal contacts without having to purchase special instruments or materials. This method is not time-...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：2004-07-01 00:00:00
abstract：:SUMMARY The purpose of this study was to evaluate the influence the width of the occlusal isthmus and inlay material had on the stress distribution, displacement, and fracture resistance of upper human premolars. For this in vitro test, 35 intact upper premolars (UPM) were selected and five were kept intact for the co...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/13-092-L
更新日期：2014-07-01 00:00:00
abstract：:The current study compared the marginal adaptation of Class II open-sandwich restorations with a RMGIC versus a dual-cure composite as dentin substitute. Class II cavities were prepared on 50 extracted human third molars. The teeth were randomly assigned to two groups of 25 teeth to compare one dual cure composite (Mu...
journal_title：Operative dentistry
pub_type： 杂志文章,随机对照试验
doi：10.2341/08-29
更新日期：2009-03-01 00:00:00
abstract：:This study was designed to compare strength, elastic modulus (stiffness), and hardness for five composite resin materials that are used for laboratory-fabricated posterior composite restorations. Ten specimens of each material were processed according to the manufacturer's instructions. Statistical analysis indicated ...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1994-11-01 00:00:00
abstract：:Under clinical conditions, the time needed for the proper light curing of luting composites or the multi-incremental buildup of a large restoration with halogen curing units is quite extensive. Due to the development of high power curing devices, such as argon lasers and plasma arc lights and, in order to decrease cur...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/06-79
更新日期：2007-05-01 00:00:00
