Abstract:
OBJECTIVES:This study investigated the influence of resin composite preheating temperature, light curing regimen (mode and duration) on post-gel shrinkage strain (PGSS) and degree of conversion (DC) of a restorative resin composite. METHODS:A hybrid resin composite preheated to three different temperatures (37 degrees C, 54 degrees C and 68 degrees C) was cured using a high intensity light emitting diode (LED) curing unit. The light source was used in 40- and 20-second continuous mode as well as soft start mode. The resin composite was monitored for PGSS during curing and 10 minutes following light irradiation using strain gauges. DC was measured using FTIR spectrometer. The results were analyzed using two-way ANOVA followed by the Duncan's Multiple Range Test for pairwise comparisons. The significance level was set at p < or = 0.05. RESULTS:Preheating of the resin composite significantly increased its PGSS and DC. The soft start groups revealed significantly lower PGSS values compared to the 20- and 40-second groups without altering the DC. CONCLUSIONS:Preheating of resin composite prior to curing increased its DC but also increased its PGSS. The soft-start mode decreased the PGSS of resin composite without altering the DC.
journal_name
Oper Dentjournal_title
Operative dentistryauthors
El-Korashy DIdoi
10.2341/09-072-Lsubject
Has Abstractpub_date
2010-03-01 00:00:00pages
172-9issue
2eissn
0361-7734issn
1559-2863journal_volume
35pub_type
杂志文章abstract::Most manufacturers of dental adhesives have both a total-etch adhesive and a simplified self-etching adhesive available on the market. This study measured the enamel microtensile bond strengths of five pairs of enamel adhesives as a function of enamel roughness. The proximal surfaces of 25 extracted mandibular molars ...
journal_title:Operative dentistry
pub_type: 临床试验,杂志文章,随机对照试验
doi:
更新日期:2005-07-01 00:00:00
abstract:OBJECTIVE:This study evaluated the differences in enamel color change, surface hardness, elastic modulus, and surface roughness between treatments with four bleaching gels containing carbamide peroxide (two at 10% and one each at 35%, and 45%) and two bleaching gels containing hydrogen peroxide (two at 40%). METHODS:E...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/15-010-L
更新日期:2016-01-01 00:00:00
abstract::On occasion we receive manuscripts that we would like to publish, but do not have the page room to include in the print journal. For the full article, please go to www.jopdentonline.org or enter the provided address into your address bar. ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/1559-2863-42.6.680
更新日期:2017-11-01 00:00:00
abstract::Recently, manufacturers introduced presterilized, single-use, plastic light-curing tips to be used either routinely or on patients with known or questionable communicable health concerns. The purpose of this study was to examine the effect of these single-use tips on light transmission compared to conventional fiber-o...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1998-07-01 00:00:00
abstract::In the direct treatment of cervical lesions and to improve the impression-making procedure prior to fabricating indirect restorations, exposure of the gingival sulcus and control of hemorrhage or gingival fluid seepage are a prerequisite. For gingival displacement, cords impregnated with medicaments are widely used. I...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2002-07-01 00:00:00
abstract::The aim of this study was to determine whether using a silane-containing universal adhesive as a silane primer in glass-ceramic/resin cement systems affects biaxial flexural strength (BFS) and bonded interface integrity after loading. Glass-ceramic (IPS e.max CAD, Ivoclar/Vivadent, Schaan, Liechtenstein) disc-shaped s...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/17-356-L
更新日期:2019-03-01 00:00:00
abstract:PURPOSE:To investigate the effect of different light-curing units and depths on the degree of conversion (DC) through Fourier transform infrared spectroscopy (FTIR) and Knoop Hardness Number (KHN) of a silorane-based composite resin (Filtek LS, 3M ESPE, St Paul, MN, USA) (LS). MATERIALS AND METHODS:LS specimens mounte...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/12-479
更新日期:2014-05-01 00:00:00
abstract::This study investigated the effect of two base materials with different elastic moduli (F2000 and Vitrebond) on the fracture load of machinable ceramic inlays. Standardized MOD cavities were prepared in 18 human maxillary first or second premolars. The teeth were randomly assigned to three groups of six premolars each...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/05-3
更新日期:2006-03-01 00:00:00
abstract::This study evaluated the in vivo effects of bleaching agents containing 10% carbamide peroxide (Platinum/Colgate) or 7.5% hydrogen peroxide (Day White 2Z/Discus Dental) on mutans Streptococcus during dental bleaching. The products were applied on 30 volunteers who needed dental bleaching. In each volunteer, one of the...
journal_title:Operative dentistry
pub_type: 临床试验,杂志文章,随机对照试验
doi:
更新日期:2005-07-01 00:00:00
abstract::Minimally invasive flowable composite Class I restorations are widely used. However, flowable composites are characterized by low filler contents, modified resin formulations, low moduli of elasticity, low viscosity, generally poor mechanical properties, and decreased long-term stability. The purpose of this study was...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/11-106-L
更新日期:2012-05-01 00:00:00
abstract:UNLABELLED:This study evaluated the microtensile bond strength (μ-TBS) of low-shrinkage composites with their corresponding adhesive systems, Filtek Silorane/Silorane adhesive (SIL, 3M ESPE AG, Seefeld, Germany) and Aelite LS/One-Step Plus (AL, BISCO Inc, Schaumburg, IL, USA) in cavities with different C-factors. Filte...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/10-105-L
更新日期:2011-05-01 00:00:00
abstract:OBJECTIVES:To evaluate the clinical behavior of one-piece complete-coverage crowns and fixed partial dentures (FPDs) on teeth with vertical preparation without finish line biologically oriented preparation technique (BOPT). METHODS AND MATERIALS:This prospective study included 52 patients requiring treatment with rest...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/17-124-C
更新日期:2018-09-01 00:00:00
abstract:CLINICAL RELEVANCE:Pigments in tooth structures affect the diffusion of H2O2 through enamel and dentin. The bleaching methodology can be impacted. SUMMARY:Objective: The aim of this study was to evaluate the influence of the presence of pigments in tooth structures on the trans-enamel and trans-dentin diffusion of hyd...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/19-013-L
更新日期:2020-11-01 00:00:00
abstract:OBJECTIVES::To evaluate the effect of a remineralizing gel combining fluoride and calcium silicate/phosphate or a sodium fluoride gel on bleached enamel microhardness, color, and wear susceptibility. METHODS AND MATERIALS::Two hundred forty bovine enamel-dentin samples were prepared. Baseline analysis of Knoop microha...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/17-150-L
更新日期:2019-01-01 00:00:00
abstract:CLINICAL RELEVANCE:Computer-aided design/computer-aided manufacturing (CAD/CAM) composite resins are susceptible to degradation by dietary solvents. Dietary counselling is prudent when placing such CAD/CAM restorations. SUMMARY:This study determined the effect of dietary solvents on the surface roughness (Ra) of direc...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/19-070-L
更新日期:2020-07-01 00:00:00
abstract::Treatment of a caries active patient requires the clinician to be knowledgeable in the restorative and risk management issues with which these patients often present. Modifications of risk factors that promote dental caries play an important part in the long-term restorative success in these patients. Patient complian...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2002-03-01 00:00:00
abstract:OBJECTIVE:To study the interfacial ultra-morphology formed by "all-in-one" self-etch adhesives. METHODS:Forty-nine extracted molars were assigned to one of five all-in-one adhesives: Adper Prompt L-Pop (AP, 3M ESPE); Clearfil S3 Bond (S3, Kuraray); G-Bond (GB, GC America); iBond (iB, Heraeus Kulzer) and Xeno IV (XE, D...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/07-133
更新日期:2008-09-01 00:00:00
abstract::This study determined the influence of light curing protocols and matrix type on the margin quality and marginal seal of Class II resin-based composite restorations. In extracted human molars, box-shaped MOD cavities with 1 mm wide interproximal bevels were prepared with cervical margins located at least 1 mm coronal ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/04-194
更新日期:2006-01-01 00:00:00
abstract::Marginal adaptation to cylindrical dentin preparations of five commercially available dental composites--Charisma, Estelite, Herculite, Pertac, and Silux Plus--and seven experimental dental composites containing prepolymerized filler was evaluated by measurement of the wall-to-wall polymerization contraction gaps. The...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1997-11-01 00:00:00
abstract::No data are available on the direct acute vascular effect of dental bonding materials on the dental pulp. This study investigated the effects of the components of a composite resin-bonding system on pulpal vascular diameter. Three groups of 10 male Sprague-Dawley rats (weighing 330 +/- 51 g) were used for this investi...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2000-09-01 00:00:00
abstract::This study compared the clinical performance of a nanofilled resin composite for posterior restorations with 2 microhybrid and 1 packable composite after 12 months of clinical service. Forty-two patients with at least 5 Class I or II restorations under occlusion were enrolled in this study. A total of 148 restorations...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/05-103
更新日期:2006-07-01 00:00:00
abstract::This study evaluated in vitro the necessity of retention grooves in approximal boxes in class 2 preparations with faciolingually wide occlusal extensions (occlusal isthmus width 1.8 mm). Thirty-six class 2 mesio-occlusal cavities were prepared in sound human maxillary premolar teeth and divided into three groups of 12...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1993-03-01 00:00:00
abstract:OBJECTIVES:To evaluate the beam profile and the spectral output of monowave and polywave light-emitting diodes (LEDs) and their influence on the degree of conversion (DC) of bulk fill composites. METHODS:A monowave LED (Smartlite Focus, Dentsply) and a polywave LED (Valo Cordless, Ultradent) were characterized using a...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/16-164-L
更新日期:2017-07-01 00:00:00
abstract::This study investigated the effects of an at-home bleaching gel containing 15% carbamide peroxide on the susceptibility of tooth-colored restorative materials to different staining solutions. The tooth-colored restoratives used in this study were a nano resin composite (Filtek Z350), a packable resin composite (Filtek...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/08-42
更新日期:2009-01-01 00:00:00
abstract:PURPOSE:To investigate clinical performance of a low-shrinkage silorane-based composite resin when used for repairing conventional dimethacrylate-based composite restorations. BACKGROUND:Despite the continued development of resin-based materials, polymerization shrinkage and shrinkage stress still require improvement....
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/11-121-C
更新日期:2012-09-01 00:00:00
abstract:OBJECTIVE:The aim of the study was to compare in Class V composite restorations marginal leakage measurements obtained with microcomputed tomography (micro-CT) and scanning electron microscopy (SEM) observations. METHODS:Class V cavities were prepared on 10 human molars and restored using Optibond FL (Kerr, Orange, CA...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/14-022-L
更新日期:2015-07-01 00:00:00
abstract::The effect of microabrasion on human enamel has been well documented; however, no information is available on its effect on dentin or restorative materials. The purpose of this study was to evaluate the effect of the microabrasion technique on the surface roughness of restorative materials and enamel and dentin surfac...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1996-03-01 00:00:00
abstract::This in vitro study compared the marginal and internal adaptation of bulk-filled Class I and cuspal coverage direct resin composite restorations filled with different types of adhesive restorative systems and different thicknesses of bonding agent. Seventy-two intact, caries-free, freshly extracted human molars were r...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/06-157
更新日期:2007-09-01 00:00:00
abstract::This study examined the relationship between the bond agent application duration and the dentin bond strength of several single-application bonding systems. The restorative material/ bonding systems used were Reactmer, with its single-application bonding system Reactmer Bond (RB, Shofu Inc, Kyoto, Japan); Palfique Est...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2002-05-01 00:00:00
abstract::This in vitro study measured cusp deflection associated with MOD resin composite restorations in maxillary premolars with different curing light modes. Soft-start polymerization may reduce cusp deflection by reducing polymerization shrinkage stress. Forty maxillary premolars were mounted in stone and slot MOD cavities...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:
更新日期:2005-11-01 00:00:00