Interfacial Evaluation of CAD/CAM Resin Inlays on the Cavity Floor Using Swept-source Optical Coherence Tomography.

Abstract:

CLINICAL RELEVANCE:When a resin nanoceramic inlay is cemented using self-adhesive cement, a universal dentin adhesive can be applied to the prepared cavity. The application of the adhesive before self-adhesive cement placement provides similar or better interfacial adaptation than without the adhesive. SUMMARY:Purpose: The first objective of this study was to determine whether the luting material used for computer-aided design and computer-aided manufacture resin nanoceramic inlays affected interfacial adaptation. The second objective was to investigate whether application of a universal dentin adhesive before cementation affected interfacial adaptation. The final objective was to compare the inlay-side and dentin-side interfaces in the cement space.Methods and Materials: Seventy-four class I cavities were prepared on extracted human third molars. Cavities were optically scanned, and resin nanoceramic inlays were milled using Lava Ultimate blocks (3M ESPE). For the control groups, the fabricated inlays were cemented using Panavia V5 (Kuraray Noritake) or FujiCem 2 (GC). For the experimental groups, the teeth were randomly divided into groups I and II. Group I contained four subgroups using different luting materials; in all subgroups, the inlays were cemented and dual cured without pretreatment. Group II contained six subgroups in which inlays were cemented and dual cured after application of a universal dentin adhesive. After thermocycling, interfacial adaptation was measured using swept-source optical coherence tomography (SS-OCT) imaging and statistically compared among groups.Results: Interfacial adaptation was different depending on the luting material used (p<0.05). After application of a universal adhesive, some subgroups showed improved interfacial adaptation (p<0.05). In the comparison of inlay-side and dentin-side interfaces, no difference was found in interfacial adaptation (p>0.05).Conclusions: Interfacial adaptation for resin nanoceramic inlays differed with luting material. For some self-adhesive cements, application of a universal adhesive before cementation improved interfacial adaptation.

journal_name

Oper Dent

journal_title

Operative dentistry

authors

Han SH,Shimada Y,Sadr A,Tagami J,Yang SE

doi

10.2341/19-141-L

subject

Has Abstract

pub_date

2020-11-01 00:00:00

pages

664-676

issue

6

eissn

0361-7734

issn

1559-2863

pii

444421

journal_volume

45

pub_type

杂志文章
  • Degree of conversion of luting resins around ceramic inlays in natural deep cavities: a micro-Raman spectroscopy analysis.

    abstract::This study evaluated the degree of conversion (%DC) of luting agents around ceramic inlays placed in deep natural cavities. Thirty-six cylindrical Class I cavities (diameter = 4 mm, depth = 4 mm) were prepared in freshly extracted human teeth and randomly divided according to the luting materials used for luting CAD/C...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/10-012-L

    authors: Lohbauer U,Pelka M,Belli R,Schmitt J,Mocker E,Jandt KD,Müller FA

    更新日期:2010-09-01 00:00:00

  • Fluoride release from fluoride-containing materials.

    abstract::This in vitro study evaluated the amount of fluoride released from fluoride-containing materials over a period of 28 days. Six disk samples (2.06 +/- 0.06 cm2) were prepared of each material and divided at random into seven groups: Group 1: Chelon-Fil; Group 2: Chelon-Silver; Group 3: VariGlass; Group 4: Dyract; Group...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: de Araujo FB,García-Godoy F,Cury JA,Conceição EN

    更新日期:1996-09-01 00:00:00

  • Can Silanization Increase the Retention of Glass-fiber posts? A Systematic Review and Meta-analysis of In Vitro Studies.

    abstract::The role of silanes in the bonding of resin luting agents to glass-fiber posts (GFPs) is a controversial topic, and the question still remains whether post silanization is able to improve the retention of GFPs luted into root canals. Thus, this study was designed to determine whether evidence exists to justify silaniz...

    journal_title:Operative dentistry

    pub_type: 杂志文章,meta分析

    doi:10.2341/14-330-O

    authors: Moraes AP,Sarkis-Onofre R,Moraes RR,Cenci MS,Soares CJ,Pereira-Cenci T

    更新日期:2015-11-01 00:00:00

  • Fracture Toughness Analysis of Ceramic and Resin Composite CAD/CAM Material.

    abstract:OBJECTIVES:To evaluate and compare the fracture toughness of dental CAD/CAM materials of different material classes intended for in-office milling (glass ceramics, hybrid, resin composites) and the influence of aging on this property. METHODS AND MATERIALS:The fracture toughness (critical intensity factor, KIc) values...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/18-161-L

    authors: Hampe R,Theelke B,Lümkemann N,Eichberger M,Stawarczyk B

    更新日期:2019-07-01 00:00:00

  • Laser Influence on Dental Sensitivity Compared to Other Light Sources Used During In-office Dental Bleaching: Systematic Review and Meta-analysis.

    abstract:CLINICAL RELEVANCE:The use of laser light during bleaching will not reduce the incidence or severity of sensitivity and will not increase the degree of color change compared with nonlaser light sources. SUMMARY:Objective: To evaluate whether the use of laser during in-office bleaching promotes a reduction in dental se...

    journal_title:Operative dentistry

    pub_type: 杂志文章,meta分析

    doi:10.2341/19-064-L

    authors: Casado B,Pellizzer EP,Souto Maior JR,Lemos C,Vasconcelos B,Moraes S

    更新日期:2020-11-01 00:00:00

  • Effect of bleaching on fracture toughness of resin composites.

    abstract::This study determined the effect of bleaching agents on the fracture toughness of composite materials. Four nanofilled resin composites were evaluated: Filtek Supreme Plus, Tetric EvoCeram, Premise and Esthet-X. Four concentrations of bleaching agents were tested: Opalescence PF 10%, 20%, 35% and 45%. Fifty specimens ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/08-120-L

    authors: Cho SD,Bulpakdi P,Matis BA,Platt JA

    更新日期:2009-11-01 00:00:00

  • Administration of ascorbic acid to prevent bleaching-induced tooth sensitivity: a randomized triple-blind clinical trial.

    abstract::This study evaluated the effect of ascorbic acid, 500 mg every eight hours, on bleaching-induced tooth sensitivity. A triple-blind, parallel design, and placebo-controlled randomized clinical trial was conducted on 39 adults. The pills (placebo or ascorbic acid) were administered three times per day for 48 hours; the ...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/12-483-C

    authors: de Paula EA,Kossatz S,Fernandes D,Loguercio AD,Reis A

    更新日期:2014-03-01 00:00:00

  • Load capability of excessively flared teeth restored with fiber-reinforced composite posts and all-ceramic crowns.

    abstract::This investigation evaluated the stabilizing effect of glass fiber reinforced posts (FRP) luted with self-adhesive universal cement on the fracture resistance of excessively flared endodontically treated teeth (ETT). Values were compared to teeth with no ferrule, 2 mm ferrule and resin cement for luting with 2 mm ferr...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/05-142

    authors: Naumann M,Preuss A,Frankenberger R

    更新日期:2006-11-01 00:00:00

  • Influence of ceramic thickness and ceramic materials on fracture resistance of posterior partial coverage restorations.

    abstract::This study evaluated the influence of ceramic thickness and ceramic materials on fracture resistance of posterior partial coverage ceramic restorations. Forty extracted molars were allocated into four groups (n=10) to test for two variables: 1) the thickness of ceramic (1 mm or 2 mm) and 2) the ceramic materials (a li...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/12-459-L

    authors: Bakeman EM,Rego N,Chaiyabutr Y,Kois JC

    更新日期:2015-03-01 00:00:00

  • Effect of light intensity and exposure duration on cure of resin composite.

    abstract::Of the many factors under their control, clinicians can manipulate light-exposure duration but must deal with a set intensity of light emitted from the dental curing unit. This research investigates the interdependence of exposure duration and source intensity on resin cure at various depths within a simulated light-c...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Rueggeberg FA,Caughman WF,Curtis JW Jr

    更新日期:1994-01-01 00:00:00

  • Reasons for placement and replacement of dental restorations in the United States Navy Dental Corps.

    abstract::This study investigated the reasons for placement and replacement of dental restorations in the United States Navy Dental Corps. The relationship between restoration longevity and the reasons for replacement of restorations was also studied. Data on newly placed dental restorations were collected from restorative dent...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: York AK,Arthur JS

    更新日期:1993-09-01 00:00:00

  • Influence of Conditioning Time of Universal Adhesives on Adhesive Properties and Enamel-Etching Pattern.

    abstract:OBJECTIVES:To evaluate the effect of application protocol in resin-enamel microshear bond strength (μSBS), in situ degree of conversion, and etching pattern of three universal adhesive systems. METHODS AND MATERIALS:Sixty-three extracted third molars were sectioned in four parts (buccal, lingual, and proximals) and di...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/15-213-L

    authors: Cardenas AM,Siqueira F,Rocha J,Szesz AL,Anwar M,El-Askary F,Reis A,Loguercio A

    更新日期:2016-09-01 00:00:00

  • Relationship between nanoleakage and microtensile bond strength at the resin-dentin interface.

    abstract::To evaluate the correlation between microtensile dentin bond strength (microTBS) and silver ion penetration, two total-etch 3-step and one self-etch 2-step system were investigated. OptiBond FL adhesive was applied to flat occlusal dentin on six non-carious human molars, and a resin composite "crown" was formed in 2 m...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Guzmán-Armstrong S,Armstrong SR,Qian F

    更新日期:2003-01-01 00:00:00

  • The effect of flowable materials on the microleakage of Class II composite restorations that extend apical to the cemento-enamel junction.

    abstract::This in vitro study investigated the effects of a thin layer of flowable composite or compomer on microleakage occurring in Class II packable and nanofilled composite restorations that extend apical to the cemento-enamel junction (CEJ). The current study also investigated any differences in microleakage that occur bet...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/08-91

    authors: Sadeghi M,Lynch CD

    更新日期:2009-05-01 00:00:00

  • The use of resin composite pins to improve retention of Class IV resin composite restorations.

    abstract::This study evaluated the effect of an intracoronal resin composite pin on Class IV resin composite restorations. A control group of 16 bovine teeth was prepared with standardized conventional Class IV preparations. For an experimental group, 16 similar Class IV preparations were made, with the addition of an intracoro...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Roberts HW,Hermesch CB,Charlton DG

    更新日期:2000-07-01 00:00:00

  • Effect of rinse time on microleakage between composite and etched enamel.

    abstract::This study compared microleakage of composite bonded to etched flattened enamel in seven groups of five extracted maxillary molars. The facial enamel of the molars was ground flat and etched for 20 seconds with 37% phosphoric acid gel. In one group, etching gel was not rinsed but dried only. In four groups, gel was ri...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Summitt JB,Chan DC,Dutton FB,Burgess JO

    更新日期:1993-01-01 00:00:00

  • Coronal fractures in posterior teeth.

    abstract::Coronal fractures of posterior teeth are not rare in clinical practice. Most of the time they constitute a restorational problem for the clinician, since they usually end below the free gingival crest. Two hundred coronal fractures of posterior teeth were examined in this study, with respect to several factors. Some o...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Lagouvardos P,Sourai P,Douvitsas G

    更新日期:1989-01-01 00:00:00

  • Effect of Different Light Sources and Enamel Preconditioning on Color Change, H2O2 Penetration, and Cytotoxicity in Bleached Teeth.

    abstract::This study evaluated the effects of acid etching of the enamel and the combination of different light sources (halogen light, light-emitting diodes [LEDs], and LED/Laser) and the bleaching product on color change, penetration of hydrogen peroxide (H2O2), and cytotoxicity over time. The color change (ΔE) and the amount...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/14-364-L

    authors: Gonçalves RS,Costa CA,Soares DG,dos Santos PH,Cintra LT,Briso AL

    更新日期:2016-01-01 00:00:00

  • Effect of Sonic Resin Composite Delivery on Void Formation Assessed by Micro-computed Tomography.

    abstract:OBJECTIVES:The aim of this study was to quantify the internal void volume formation in commercially available, resin composites inserted using conventional or sonic insertion methods, and analyzed using three-dimensional (3D) micro-computed tomography (μCT). METHODS AND MATERIALS:Four resin composites were evaluated: ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/16-331-L

    authors: Hirata R,Pacheco RR,Caceres E,Janal MN,Romero MF,Giannini M,Coelho PG,Rueggeberg FA

    更新日期:2018-03-01 00:00:00

  • Assessing the surface roughness of a posterior resin composite: effect of surface sealing.

    abstract::This study assessed the in vitro influence of surface sealing on the surface roughness of a posterior resin composite before and after toothbrushing. Thirty specimens (13 mm diameter x 1 mm high) were fabricated from Filtek-P60 resin composite and randomly assigned to three groups (n = 10): a non-sealed control and tw...

    journal_title:Operative dentistry

    pub_type: 临床试验,杂志文章,随机对照试验

    doi:

    authors: Takeuchi CY,Orbegoso Flores VH,Palma Dibb RG,Panzeri H,Lara EH,Dinelli W

    更新日期:2003-05-01 00:00:00

  • The Effect of Resin-modified Glass-ionomer Cement Base and Bulk-fill Resin Composite on Cuspal Deformation.

    abstract:OBJECTIVES:This study investigated cuspal deformation in teeth restored with different types of adhesive materials with and without a base. METHODS:Mesio-occluso-distal slot cavities of moderately large dimension were prepared on extracted maxillary premolars (n=24). Teeth were assigned to one of four groups and resto...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/14-331-L

    authors: Nguyen KV,Wong RH,Palamara J,Burrow MF

    更新日期:2016-03-01 00:00:00

  • Effect of a ferrule and increased clinical crown length on the in vitro fracture resistance of premolars restored using two dowel-and-core systems.

    abstract::This study investigated the effect of a crown-lengthening ferrule on the fracture resistance of endodontically-treated teeth restored with two dowel-core systems. Thirty-two extracted mandibular first premolars were sectioned perpendicular to the long axis at a point 1.0 mm occlusal to the buccal cementoenamel junctio...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/06-169

    authors: Meng QF,Chen YM,Guang HB,Yip KH,Smales RJ

    更新日期:2007-11-01 00:00:00

  • Reversal of dentin bonding to bleached teeth.

    abstract::Many studies have shown a considerable reduction in enamel bond strength of resin composite restorations when the bonding procedure is carried out immediately after bleaching. These studies claim that a certain waiting period is needed prior to restoration to reach the original bond strength values prior to bleaching....

    journal_title:Operative dentistry

    pub_type: 临床试验,杂志文章,随机对照试验

    doi:

    authors: Kaya AD,Türkün M

    更新日期:2003-11-01 00:00:00

  • Effects of carbamide peroxide on the staining susceptibility of tooth-colored restorative materials.

    abstract::This study investigated the effects of an at-home bleaching gel containing 15% carbamide peroxide on the susceptibility of tooth-colored restorative materials to different staining solutions. The tooth-colored restoratives used in this study were a nano resin composite (Filtek Z350), a packable resin composite (Filtek...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/08-42

    authors: Yu H,Pan X,Lin Y,Li Q,Hussain M,Wang Y

    更新日期:2009-01-01 00:00:00

  • Microleakage and marginal hybrid layer formation of compomer restorations.

    abstract::The tested hypotheses of this study were that dentin enamel bonding agents (DBAs) proposed for compomers create a hybrid layer (HL) that seals the margins of Class V restorations and HL is free from voids or gaps on both enamel and dentin margins. For purposes of this study, Class V restorations (n = 70) were made in ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Prati C,Nucci C,Toledano M,García-Godoy F,Breschi L,Chersoni S

    更新日期:2004-01-01 00:00:00

  • Dynamic Viscoelastic Characterization of Bulk-fill Resin-based Composites and Their Conventional Counterparts.

    abstract::This study compared the viscoelastic properties of restorative and flowable bulk-fill resin-based composites (RBCs) with their conventional counterparts and evaluated the impact of aqueous solutions on viscoelastic properties. The materials examined included three conventional RBCs (Filtek Z350, Tetric N Ceram, and Be...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/19-005-L

    authors: Yap AU,Eweis AH,Yahya NA

    更新日期:2020-03-01 00:00:00

  • Effects of light activation, agent concentration, and tooth thickness on dental sensitivity after bleaching.

    abstract:UNLABELLED:Examining three bleaching systems, this in vivo clinical trial evaluated the relationship among tooth sensitivity, light activation, and agent concentration, and it correlated dental sensitivity with tooth thickness. MATERIALS AND METHODS:Eighty-seven volunteer patients were included. Inclusion criteria wer...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/12-335-C

    authors: Moncada G,Sepúlveda D,Elphick K,Contente M,Estay J,Bahamondes V,Fernandez E,Oliveira OB,Martin J

    更新日期:2013-09-01 00:00:00

  • Lesion Activity Assessment (LAA) in Conjunction With International Caries Detection and Assessment System (ICDAS) for Occlusal Caries Diagnosis in Permanent Teeth.

    abstract:OBJECTIVE:The aim of this study was to investigate the clinical performance and to validate the Lesion Activity Assessment (LAA) in conjunction with the International Caries Detection and Assessment System (ICDAS) for occlusal caries diagnosis in permanent teeth. METHODS:Patients with erupted or partially erupted thir...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/13-332-C

    authors: Cotta F,de Castilho LS,Moreira AN,Paiva SM,Ferreira EF,Ferreira LC,Magalhães CS

    更新日期:2015-09-01 00:00:00

  • Bonding ability of paste-paste glass ionomer systems to tooth structure: in vitro studies.

    abstract::This study investigated the effect of nonrinse conditioners (ie, Ketac Nano Primer [KNP] and GC Self Conditioner [SC]) used as substrate pretreatment and their respective paste-paste resin-modified glass-ionomer cement (RMGIC) (ie, Ketac Nano [KN] and Fuji Filling LC [FF]) on microtensile bond strength to dentin and m...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/14-030-L

    authors: Cook NB,Feitosa SA,Patel A,Alfawaz Y,Eckert GJ,Bottino MC

    更新日期:2015-05-01 00:00:00

  • Placement and replacement of amalgam restorations in Italy.

    abstract::The reasons for placement and replacement and the longevity of amalgam restorations were recorded by 62 Italian private practitioners. The survey compiled 1935 amalgam restorations inserted due to primary caries (59%) and failed restorations (41%). The clinical diagnosis of secondary caries constituted 59% of failures...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Mjör IA,Toffenetti F

    更新日期:1992-03-01 00:00:00