Abstract：
:This study tested the null hypothesis that there no difference between two-step and one-step self-etch adhesives in their compatibility with these composites. The microtensile bond strengths (microTBS) of two two-step systems (Clearfil SE Bond, Kuraray and Tyrian SPE/One-Step Plus, BISCO) were compared with two one-step systems (Xeno III, Dentsply DeTrey and Brush&Bond, Parkell) for their coupling to a dual-cured composite. Silver tracer penetration of the four adhesives bonded to a light-cured or a chemical-cured composite was examined using TEM. Significant differences in microTBSs between composite curing modes were seen only in the one-step adhesives. For one-step self-etch adhesives bonded to the chemical-cured composite, TEM revealed signs of frank composite uncoupling along the adhesive-composite interface, which may be attributed to the adverse chemical interaction between the acidic adhesive and the composite. In addition, "water trees" that represent channels of increased permeability with the polymerized adhesive layer were also observed in the one-step adhesives. Both features were absent along the resin-dentin interfaces when chemical-cured composites were coupled to the two-step self-etch adhesives.
journal_name
Oper Dentjournal_title
Operative dentistryauthors
Cheong C,King NM,Pashley DH,Ferrari M,Toledano M,Tay FRkeywords:
subject
Has Abstractpub_date
2003-11-01 00:00:00pages
747-55issue
6eissn
0361-7734issn
1559-2863journal_volume
28pub_type
杂志文章abstract：:This study evaluated the effect of polishing after one-day storage in water on the gap formation around a Class V restoration completely bordered by enamel (coronal cavity) using one resin-modified glass ionomer, one compomer and one conventional glass ionomer as a control. The study also examined gap formation of the...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：2002-01-01 00:00:00
abstract：:Marginal adaptation to cylindrical dentin preparations of five commercially available dental composites--Charisma, Estelite, Herculite, Pertac, and Silux Plus--and seven experimental dental composites containing prepolymerized filler was evaluated by measurement of the wall-to-wall polymerization contraction gaps. The...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1997-11-01 00:00:00
abstract：OBJECTIVES:This study aimed to assess the retention of metal copings luted to uremic teeth with five different luting agents. METHODS:A total of 35 sound natural molars was collected from uremic patients and randomly assigned into five groups (n=7). The teeth were prepared for metal copings using diamond tips and wate...
journal_title：Operative dentistry
pub_type： 杂志文章,随机对照试验
doi：10.2341/12-523-LR2
更新日期：2014-05-01 00:00:00
abstract：OBJECTIVES:The aim of this study was to quantify the internal void volume formation in commercially available, resin composites inserted using conventional or sonic insertion methods, and analyzed using three-dimensional (3D) micro-computed tomography (μCT). METHODS AND MATERIALS:Four resin composites were evaluated: ...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/16-331-L
更新日期：2018-03-01 00:00:00
abstract：:Most manufacturers of dental adhesives have both a total-etch adhesive and a simplified self-etching adhesive available on the market. This study measured the enamel microtensile bond strengths of five pairs of enamel adhesives as a function of enamel roughness. The proximal surfaces of 25 extracted mandibular molars ...
journal_title：Operative dentistry
pub_type： 临床试验,杂志文章,随机对照试验
doi：
更新日期：2005-07-01 00:00:00
abstract：:The development of adhesive agents for bonding composite to dentin has rapidly evolved in recent years. It is postulated that dentin bond strengths in the range of 17 MPa are sufficient to resist the polymerization shrinkage of composite resins. The purpose of this study was to evaluate the shear bond strengths of the...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1995-03-01 00:00:00
abstract：:The bulk-filling of deep, wide dental cavities is faster and easier than traditional incremental restoration. However, the extent of cure at the bottom of the restoration should be carefully examined in combination with the polymerization contraction and gap formation that occur during the restorative procedure. The a...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/13-324-L
更新日期：2015-03-01 00:00:00
abstract：CLINICAL RELEVANCE:Computer-aided design/computer-aided manufacturing (CAD/CAM) composite resins are susceptible to degradation by dietary solvents. Dietary counselling is prudent when placing such CAD/CAM restorations. SUMMARY:This study determined the effect of dietary solvents on the surface roughness (Ra) of direc...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/19-070-L
更新日期：2020-07-01 00:00:00
abstract：OBJECTIVES::To evaluate the effect of a remineralizing gel combining fluoride and calcium silicate/phosphate or a sodium fluoride gel on bleached enamel microhardness, color, and wear susceptibility. METHODS AND MATERIALS::Two hundred forty bovine enamel-dentin samples were prepared. Baseline analysis of Knoop microha...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/17-150-L
更新日期：2019-01-01 00:00:00
abstract：CLINICAL RELEVANCE:When a resin nanoceramic inlay is cemented using self-adhesive cement, a universal dentin adhesive can be applied to the prepared cavity. The application of the adhesive before self-adhesive cement placement provides similar or better interfacial adaptation than without the adhesive. SUMMARY:Purpose...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/19-141-L
更新日期：2020-11-01 00:00:00
abstract：:Dentin bridging of 150 mechanically exposed monkey pulps to two adhesive resins [BondWell LC (BW); Clearfil Liner Bond II (LB)] and a calcium hydroxide cement [Dycal (DY)] were histopathologically evaluated at 3, 7, 14, 30, and 60 days after operation (n = 10). The dentin bridge structure was three-dimensionally recon...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：2000-05-01 00:00:00
abstract：:A fundamental issue of restorative treatment is assessing the different conditions of cases not only from tooth-to-tooth but also from the activity of each caries lesion and the size of the cavity. In addition, restorative treatment is sometimes carried out for prosthetic and cosmetic purposes and involves cutting sou...
journal_title：Operative dentistry
pub_type：
doi：
更新日期：2002-05-01 00:00:00
abstract：:Amalgam has been used in the restoration of structurally compromised posterior teeth for many years. When placing large amalgam restorations, replacement of weak cusps with restorative material is recommended to prevent tooth fracture. This recommendation can be modified with new guidelines using modern adhesive techn...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/11-082-T
更新日期：2012-07-01 00:00:00
abstract：OBJECTIVES:This study evaluated the bond strength of luting systems for bonding glass fiber posts to root canal dentin. The hypothesis tested was that there are no differences in bond strength of glass fiber posts luted with different cement systems. METHODS:Forty bovine incisors were randomly assigned to five differe...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/11-035-L
更新日期：2012-01-01 00:00:00
abstract：:This study determined the influence of light curing protocols and matrix type on the margin quality and marginal seal of Class II resin-based composite restorations. In extracted human molars, box-shaped MOD cavities with 1 mm wide interproximal bevels were prepared with cervical margins located at least 1 mm coronal ...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/04-194
更新日期：2006-01-01 00:00:00
abstract：:The aim of the present study was to evaluate the effect of composite resin contamination with powdered and unpowdered latex gloves on the shear bond strength of etch-and-rinse and two-step self-etch adhesive systems. Standard flat dentin surfaces were prepared on the facial aspect of 120 bovine incisors and randomly a...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/11-088-L
更新日期：2012-09-01 00:00:00
abstract：STATEMENT OF THE PROBLEM:Precise shade matching can be one of the most difficult tasks for the dentist and some variables may influence the process of shade comparison. PURPOSE OF THE STUDY:This study tested the differences in shade perception between genders, the influence of the observer's clinical experience, and t...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/10-057-C
更新日期：2012-05-01 00:00:00
abstract：:The aim of this review was to compile recent evidence related to nanofilled resin composite materials regarding the properties and clinical performance. Special attention was given to mechanical properties, such as strength, hardness, abrasive wear, water sorption, and solubility. The clinical performance of nanocompo...
journal_title：Operative dentistry
pub_type： 杂志文章,评审
doi：10.2341/17-208-T
更新日期：2018-07-01 00:00:00
abstract：OBJECTIVE::Computer aided design-computer aided machining (CAD-CAM) ceramic crowns are replacing ceramo-metal ones due to newly developed mechanical properties and esthetics. To obtain knowledge about their interactions due to polishing and occlusal contacts with the opposing dental enamel specimen, including surface r...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/17-153-L
更新日期：2019-01-01 00:00:00
abstract：OBJECTIVE:To study the interfacial ultra-morphology formed by "all-in-one" self-etch adhesives. METHODS:Forty-nine extracted molars were assigned to one of five all-in-one adhesives: Adper Prompt L-Pop (AP, 3M ESPE); Clearfil S3 Bond (S3, Kuraray); G-Bond (GB, GC America); iBond (iB, Heraeus Kulzer) and Xeno IV (XE, D...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/07-133
更新日期：2008-09-01 00:00:00
abstract：OBJECTIVE:The purpose of this study was to evaluate the effects of different desensitizing agents on the prevention of root caries when applied to root surfaces. MATERIALS AND METHODS:Thirty human roots were sectioned into quarters with a 3 × 4 mm window. A desensitizer (VX, Clinpro™ XT Varnish; SP, Seal & Protect®; o...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/11-007-L
更新日期：2012-05-01 00:00:00
abstract：:This study compares volumetric changes and rates of shrinkage during different stages of polymerization of dental resin composites and compomers exposed to the same total energy by using two different combinations of power density and exposure duration. A hybrid composite and its equivalent flowable and a compomer and...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：2003-09-01 00:00:00
abstract：:This investigation examined the susceptibility to staining and translucency changes of some new tooth-colored restorative materials after immersion in different beverages. The materials studied were 3M Filtek Z350XT (ZT), 3M Filtek 350XT Flowable Restorative (ZF), Shofu Beautifil Flow Plus (BF), Shofu Beautifil II (B2...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/149027-L
更新日期：2015-03-01 00:00:00
abstract：:A technique of restoring Class II posterior restorations with resin-based composite and a pre-polymerized composite insert was presented. This technique is intended to aid the practitioner in obtaining tight, broad, proximal contacts without having to purchase special instruments or materials. This method is not time-...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：2004-07-01 00:00:00
abstract：OBJECTIVE:The purpose of this study was to evaluate the influence of thermal cycling on the flexural properties and simulated wear of computer-aided design/computer-aided manufacturing (CAD/CAM) resin composites. METHODS:The six CAD/CAM resin composites used in this study were 1) Lava Ultimate CAD/CAM Restorative (LU)...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/16-046-L
更新日期：2017-01-01 00:00:00
abstract：:This article reports the case of a patient with bilateral hypodontia of the maxillary lateral incisors who was dissatisfied with the outcome of initial orthodontic treatment, highlighting the importance of a multidisciplinary interaction among Restorative Dentistry, Orthodontics, and Implantology to achieve satisfacto...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：10.2341/11-167-T
更新日期：2012-09-01 00:00:00
abstract：OBJECTIVES:Published transmission electron microscopy analysis of in vitro resin-dentin bonds shows that, after 44 months, almost 70% of collagen fibrils from the hybrid layer disappear. Matrix metalloproteinases (MMPs) play an important role in that process and are thought to be the main factor responsible for the sol...
journal_title：Operative dentistry
pub_type： 杂志文章,随机对照试验
doi：10.2341/12-425-L
更新日期：2014-03-01 00:00:00
abstract：:This study was designed to compare strength, elastic modulus (stiffness), and hardness for five composite resin materials that are used for laboratory-fabricated posterior composite restorations. Ten specimens of each material were processed according to the manufacturer's instructions. Statistical analysis indicated ...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1994-11-01 00:00:00
abstract：:This study compared the surface finish of eight different types of aesthetic restorative materials. The materials included resin-modified (Fuji II LC [FL], GC) and highly viscous (Fuji IX GP Fast [FN], GC) glass ionomer cements, a compomer (F2000 [FT], 3M-ESPE), minifilled (Z100 [ZO], 3M-ESPE) and microfilled (A110 [A...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：2004-01-01 00:00:00
abstract：:A study was conducted to compare the shear bond strength of a glass-ionomer cement and glass-ionomer base to coronal and radicular dentin. Two different glass ionomers were bonded to paired coronal and radicular human dentin surfaces that had received no surface treatment or had been treated passively for 20 seconds w...
journal_title：Operative dentistry
pub_type： 杂志文章
doi：
更新日期：1994-07-01 00:00:00
