Effects of delayed polishing on gap formation of cervical restorations.

Abstract:

:This study evaluated the effect of polishing after one-day storage in water on the gap formation around a Class V restoration completely bordered by enamel (coronal cavity) using one resin-modified glass ionomer, one compomer and one conventional glass ionomer as a control. The study also examined gap formation of these materials in two different cervical restorations-a cervical cavity incisally bordered by enamel and cervically bordered by dentin and a root surface cavity completely bordered by dentin. When the specimens of the two types of glass-ionomer material were polished immediately after the setting procedure, 100-120 gaps around the coronal restorative cavity were observed. In contrast, only 10-20 gaps were observed when the specimens were polished after one-day storage. Significant differences in the two glass-ionomer restorative materials were observed between immediate polishing and polishing after one-day storage. The compomer not show this pattern. Restorations placed in enamel/dentin and all-dentin gave results similar to those in all-enamel.

journal_name

Oper Dent

journal_title

Operative dentistry

authors

Irie M,Suzuki K

keywords:

subject

Has Abstract

pub_date

2002-01-01 00:00:00

pages

59-65

issue

1

eissn

0361-7734

issn

1559-2863

journal_volume

27

pub_type

杂志文章
  • Analysis of the degree of conversion of LED and halogen lights using micro-Raman spectroscopy.

    abstract::This study determined the degree of conversion of two LED (light-emitting diodes) (Elipar FreeLight [FL], 3M ESPE; GC e-Light [EL], GC), a high intensity (Elipar TriLight [TL], 3M ESPE) and a very high intensity (Astralis 10 [AS], Ivoclar Vivadent) halogen light. The degree of conversion of these lights was compared t...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Soh MS,Yap AU,Yu T,Shen ZX

    更新日期:2004-09-01 00:00:00

  • Endodontic Access Effect on Full Contour Zirconia and Lithium Disilicate Failure Resistance.

    abstract:OBJECTIVES:To evaluate the effect of endodontic access on the failure load resistance of both adhesively and conventionally luted, full-contour monolithic yttria-stabilized zirconium dioxide (Y-TZP) and adhesively luted lithium disilicate (LD) crowns cemented on prepared teeth. METHODS AND MATERIALS:Seventy-two human ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/18-231-L

    authors: Mallya J,DuVall N,Brewster J,Roberts H

    更新日期:2020-05-01 00:00:00

  • Clinical performance of ormocer, nanofilled, and nanoceramic resin composites in Class I and Class II restorations: a three-year evaluation.

    abstract:PURPOSE:This prospective long-term clinical trial evaluated and compared the three-year clinical performance of an ormocer, a nanofilled, and a nanoceramic resin composite with that of a microhybrid composite placed in Class I and Class II cavities. METHODS:Forty patients, each with four Class I and II restorations un...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/12-313-C

    authors: Mahmoud SH,El-Embaby AE,AbdAllah AM

    更新日期:2014-01-01 00:00:00

  • Effects of secondary curing on indirect posterior composite resins.

    abstract::This study was designed to compare strength, elastic modulus (stiffness), and hardness for five composite resin materials that are used for laboratory-fabricated posterior composite restorations. Ten specimens of each material were processed according to the manufacturer's instructions. Statistical analysis indicated ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Reinhardt JW,Boyer DB,Stephens NH

    更新日期:1994-11-01 00:00:00

  • Novel Microscalpels for Removing Proximal Composite Resin Overhangs on Class II Restorations.

    abstract:INTRODUCTION:Limited access to interdental spaces complicates removal of excess material when placing class II composite resin restorations. Evidence-based recommendations on interproximal finishing are rare. We present novel microscalpels for this indication. The aim of the study was to test their fracture strength an...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/16-012-L

    authors: Wolff D,Schick S,Staehle HJ,Frese C

    更新日期:2017-05-01 00:00:00

  • Lesion Activity Assessment (LAA) in Conjunction With International Caries Detection and Assessment System (ICDAS) for Occlusal Caries Diagnosis in Permanent Teeth.

    abstract:OBJECTIVE:The aim of this study was to investigate the clinical performance and to validate the Lesion Activity Assessment (LAA) in conjunction with the International Caries Detection and Assessment System (ICDAS) for occlusal caries diagnosis in permanent teeth. METHODS:Patients with erupted or partially erupted thir...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/13-332-C

    authors: Cotta F,de Castilho LS,Moreira AN,Paiva SM,Ferreira EF,Ferreira LC,Magalhães CS

    更新日期:2015-09-01 00:00:00

  • Influence of Nd:YAG laser irradiation on an adhesive restorative procedure.

    abstract::Hard tissue modification by means of laser irradiation is becoming popular in dentistry, since it promotes assorted responses between the tooth and the restorative material. Some studies on the bond strength of adhesive systems to Nd:YAG irradiated teeth have shown distinctive behaviors when irradiation was applied be...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/05-110

    authors: Franke M,Taylor AW,Lago A,Fredel MC

    更新日期:2006-09-01 00:00:00

  • Dentin permeability: sealing the dentin in crown preparations.

    abstract::Provisional restorations of full crown preparations may permit more microleakage of bacteria and their products than the final castings do. However, most investigations of the sealing qualities of cemented castings have reported that they too permit dye leakage. One approach to the problem is to seal the dentin with d...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Pashley EL,Comer RW,Simpson MD,Horner JA,Pashley DH,Caughman WF

    更新日期:1992-01-01 00:00:00

  • Hypoplastic enamel treatment in permanent anterior teeth of a child.

    abstract::In some patients with labial white stains involving the enamel and dentin, bleaching associated with a restorative procedure using composites may be an appropriate treatment alternative. Although bleaching makes the teeth and the stain whiter, the staining is less evident and easier to restore. Restorative procedures ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/12-284-T

    authors: Carvalho LD,Bernardon JK,Bruzi G,Andrada MA,Vieira LC

    更新日期:2013-07-01 00:00:00

  • Effect of mechanical properties of resin composites on the efficacy of the dentin bonding system.

    abstract::This study determined the relationship between marginal adaptation to dentin cavity preparations, tensile bond strength of the restorations, and mechanical properties of the composites. Contraction gaps, tensile bond strengths, flexural strengths, and Young's modulus of eight commercial resin composites were determine...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Hasegawa T,Itoh K,Koike T,Yukitani W,Hisamitsu H,Wakumoto S,Fujishima A

    更新日期:1999-11-01 00:00:00

  • Marginal and internal adaptation of bulk-filled Class I and Cuspal coverage direct resin composite restorations.

    abstract::This in vitro study compared the marginal and internal adaptation of bulk-filled Class I and cuspal coverage direct resin composite restorations filled with different types of adhesive restorative systems and different thicknesses of bonding agent. Seventy-two intact, caries-free, freshly extracted human molars were r...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/06-157

    authors: Stavridakis MM,Kakaboura AI,Ardu S,Krejci I

    更新日期:2007-09-01 00:00:00

  • Longevity of low- and high-copper amalgams analyzed by preparation class, tooth site, patient age, and operator.

    abstract::The purpose of this study was to compare the long-term survivals of two low-copper and three high-copper amalgam alloys, and to analyze four clinical factors for their possible effects on the restoration survivals. Some 1476 polished restorations were placed in hospital patients by a large number of operators and asse...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Smales RJ

    更新日期:1991-09-01 00:00:00

  • The effect of microabrasion on restorative materials and tooth surface.

    abstract::The effect of microabrasion on human enamel has been well documented; however, no information is available on its effect on dentin or restorative materials. The purpose of this study was to evaluate the effect of the microabrasion technique on the surface roughness of restorative materials and enamel and dentin surfac...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Chan DC,Lemke KC,Howell ML,Barghi N

    更新日期:1996-03-01 00:00:00

  • Buonocore Memorial Lecture. Dentin caries: progression and clinical management.

    abstract::A fundamental issue of restorative treatment is assessing the different conditions of cases not only from tooth-to-tooth but also from the activity of each caries lesion and the size of the cavity. In addition, restorative treatment is sometimes carried out for prosthetic and cosmetic purposes and involves cutting sou...

    journal_title:Operative dentistry

    pub_type:

    doi:

    authors: Bjørndal L

    更新日期:2002-05-01 00:00:00

  • Two-year clinical comparison of a microfilled and a hybrid resin-based composite in non-carious Class V lesions.

    abstract::The purpose of this double-blind clinical trial was to compare the retention rate in noncarious Class V lesions of two resin-based composite restorative materials with contrasting stiffness. Isolation with retraction cord, pressed paper triangles, and cotton rolls was used to closely mimic the procedures generally use...

    journal_title:Operative dentistry

    pub_type: 临床试验,杂志文章,随机对照试验

    doi:

    authors: Browning WD,Brackett WW,Gilpatrick RO

    更新日期:2000-01-01 00:00:00

  • Fit of veneers made by CAD-CAM and platinum foil methods.

    abstract::Veneers were fabricated by CEREC CAD-CAM and the platinum foil techniques for standardized preparations on 10 artificial teeth. Mesial preparation contacts were broken, but distal contacts remained intact. The veneers were cemented in a standardized manner to their teeth. The veneers and their attached cement were emb...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Suh PS,Johnson R,White SN

    更新日期:1997-05-01 00:00:00

  • Amalgam Strength Resistance to Various Contaminants.

    abstract:PURPOSE::The purpose of this study was to quantify the relative strength tolerance of 1-day and 30-day amalgam following saturation contamination with water, saliva, blood, and handpiece lubricant oil during condensation. METHODS AND MATERIALS::Valiant PhD XT amalgam was tested with 300 shear-strength (N=15) and 120 c...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/18-091-L

    authors: Roggenkamp C,Choi B,Chung J,Parhizkar R,Pham A,Robles R

    更新日期:2019-03-01 00:00:00

  • Effect of Polishing Systems on Surface Roughness and Topography of Monolithic Zirconia.

    abstract::This study evaluated the effect of different chairside polishing systems on the surface roughness and topography of monolithic zirconia. Thirty-five monolithic zirconia specimens (Lava PLUS, 3M ESPE) were fabricated and divided into five groups of seven and polished with the following: Group 1 (WZ)-Dura white stone fo...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/15-064-L

    authors: Goo CL,Yap A,Tan K,Fawzy AS

    更新日期:2016-07-01 00:00:00

  • Reversal of dentin bonding to bleached teeth.

    abstract::Many studies have shown a considerable reduction in enamel bond strength of resin composite restorations when the bonding procedure is carried out immediately after bleaching. These studies claim that a certain waiting period is needed prior to restoration to reach the original bond strength values prior to bleaching....

    journal_title:Operative dentistry

    pub_type: 临床试验,杂志文章,随机对照试验

    doi:

    authors: Kaya AD,Türkün M

    更新日期:2003-11-01 00:00:00

  • Accuracy of ceramic restorations made using an in-office optical scanning technique: an in vitro study.

    abstract::The present in vitro study concerns determination of the pre-cementation gap width of all-ceramic crowns made using an in-office digital-impression technique and subsequent computer-aided design/computer-aided manufacturing (CAD/CAM) production. Two chairside video camera systems were used: the Lava Oral scanner and C...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/12-309-L

    authors: Tidehag P,Ottosson K,Sjögren G

    更新日期:2014-05-01 00:00:00

  • Effect of preheating resin composite and light-curing units on the microleakage of Class II restorations submitted to thermocycling.

    abstract::This in vitro study evaluated microleakage in Class II cavities restored with dental composite and varying light-curing units and the temperature of the composite when subjected to a thermocycling test. Ninety cavities were prepared on the proximal surfaces of bovine teeth and randomly divided according to the light-c...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/10-226-LR1

    authors: dos Santos RE,Lima AF,Soares GP,Ambrosano GM,Marchi GM,Lovadino JR,Aguiar FH

    更新日期:2011-01-01 00:00:00

  • Microleakage of dentin/amalgam alloy bonding agents: results after 1 year.

    abstract::The purpose of this study was to evaluate the 1-year results of the dentin bond (DBS)/viscous resin liner combinations Amalgambond Plus, Tenure/Panavia, Syntac/Dual Cem, and All-Bond 2/Liner F in reducing microleakage in class 5 cavity preparations restored with an admixed or a spherical amalgam alloy and to compare t...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Meiers JC,Turner EW

    更新日期:1998-01-01 00:00:00

  • Effect of eugenol-containing temporary cements on bond strength of composite to enamel.

    abstract::The purpose of this study was to find out the degree to which eugenol-containing temporary cements or temporary filling materials affected shear bond strength of a dual-cure resin luting cement to acid-etched enamel. For this purpose 56 human caries-free third molars were embedded in acrylic resin and cross sectioned ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Jung M,Ganss C,Senger S

    更新日期:1998-03-01 00:00:00

  • Clinical evaluation of a nanofilled composite in posterior teeth: 12-month results.

    abstract::This study compared the clinical performance of a nanofilled resin composite for posterior restorations with 2 microhybrid and 1 packable composite after 12 months of clinical service. Forty-two patients with at least 5 Class I or II restorations under occlusion were enrolled in this study. A total of 148 restorations...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/05-103

    authors: Dresch W,Volpato S,Gomes JC,Ribeiro NR,Reis A,Loguercio AD

    更新日期:2006-07-01 00:00:00

  • Coronal fractures in posterior teeth.

    abstract::Coronal fractures of posterior teeth are not rare in clinical practice. Most of the time they constitute a restorational problem for the clinician, since they usually end below the free gingival crest. Two hundred coronal fractures of posterior teeth were examined in this study, with respect to several factors. Some o...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Lagouvardos P,Sourai P,Douvitsas G

    更新日期:1989-01-01 00:00:00

  • Two-year clinical evaluation of IPS Empress II ceramic onlays/inlays.

    abstract::The stronger the ceramic material, the longer the restoration stays in the mouth. The current study evaluated the two-year clinical performance of a strong ceramic system, IPS Empress II, with increased strength on onlay/inlay restorations of molars. Teeth from 35 patients, including three premolars and 32 molars, wer...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/08-97

    authors: Tagtekin DA,Ozyöney G,Yanikoglu F

    更新日期:2009-07-01 00:00:00

  • Composite photopolymerization with diode laser.

    abstract::Under clinical conditions, the time needed for the proper light curing of luting composites or the multi-incremental buildup of a large restoration with halogen curing units is quite extensive. Due to the development of high power curing devices, such as argon lasers and plasma arc lights and, in order to decrease cur...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/06-79

    authors: Knezevic A,Ristic M,Demoli N,Tarle Z,Music S,Negovetic Mandic V

    更新日期:2007-05-01 00:00:00

  • Enamel Microabrasion and Dental Bleaching on Teeth Presenting Severe-pitted Enamel Fluorosis: A Case Report.

    abstract::The present clinical case report describes the clinical steps of enamel microabrasion associated with dental bleaching to restore severely-pitted fluorosed teeth. The process of removing the fluorotic superficial stains started by using macroabrasion with a water-cooled fine tapered 3195 FF diamond bur. Rubber dam iso...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/18-116-T

    authors: Sundfeld D,Pavani CC,Pini N,Machado LS,Schott TC,Sundfeld RH

    更新日期:2019-11-01 00:00:00

  • Pulpal effects of composite resin restorations.

    abstract::This article reviews the literature concerning the pulpal effects of composite resin restorations. A number of aspects are addressed, including the composite resin materials themselves, bacterial leakage, acid-etch technique, and dentin bonding procedures. Guidelines for pulpal protection are discussed. ...

    journal_title:Operative dentistry

    pub_type: 杂志文章,评审

    doi:

    authors: Swift EJ Jr

    更新日期:1989-01-01 00:00:00

  • Fracture toughness of pin-retained class 4 restorations.

    abstract::Standardized class 4 cavities were prepared in bovine incisors and restored with a microfilled composite resin. The composite restorations were retained either by acid etching technique (AET) alone or by acid etching technique in combination with a self-threading retentive pin. Pins covered with a bonding/opaquer coat...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Attin T,Hellwig E,Hilgers RD,Zimmermann U

    更新日期:1994-05-01 00:00:00