Abstract:
:The purpose of this study was to evaluate the 1-year results of the dentin bond (DBS)/viscous resin liner combinations Amalgambond Plus, Tenure/Panavia, Syntac/Dual Cem, and All-Bond 2/Liner F in reducing microleakage in class 5 cavity preparations restored with an admixed or a spherical amalgam alloy and to compare these results to the previously reported short-term (4-day) data from this same study. Class 5 cavity preparations with occlusal margins in enamel and gingival margins in cementum were prepared on extracted human molar teeth. Prepared teeth were distributed randomly into 12 treatment groups (n = 10) consisting of the various DBS/ liners, Copalite, and no liner for each alloy. Samples were stored in saline for 12 months, thermocycled, and stained with dye. Restorations were sectioned and microleakage scored. The DBS/liner combinations, with the exception of Syntac/Dual Cem, had significantly less microleakage with both alloys than Copalite or no liner. Comparing short-term to long-term results within the DBS/liners, only Tenure/ Panavia with Tytin had a significant increase in microleakage scores. These data indicate DBS/ liner combinations can provide significant protection against microleakage under high-copper amalgam alloys for up to 1 year.
journal_name
Oper Dentjournal_title
Operative dentistryauthors
Meiers JC,Turner EWsubject
Has Abstractpub_date
1998-01-01 00:00:00pages
30-5issue
1eissn
0361-7734issn
1559-2863journal_volume
23pub_type
杂志文章abstract::This study examined the effect of different light activation modes for light-cured resin-based composites on the shear bond strength to dentin of two one-bottle adhesives with differing acidity. In this experimental study, a flat middle dentin surface was prepared on 110 extracted sound molars using a 600-grit polish ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/08-048-L
更新日期:2009-09-01 00:00:00
abstract::This study evaluated the pulp biocompatability of a new light-cured composite resin which was placed in etched glass-ionomer-lined cavities of monkey teeth. The pulpal response to this material was less than that to zinc-oxide eugenol cement in each observation period. Therefore this material seems to meet acceptable ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1991-07-01 00:00:00
abstract::This study compared the degree of marginal leakage of a compomer in Class V cavities of human primary molars prepared by a conventional dental bur and air abrasion with or without acid etching. Fifty-six non-carious extracted primary molars were randomly divided into four groups (n=14) to be prepared by four technique...
journal_title:Operative dentistry
pub_type: 临床试验,杂志文章,随机对照试验
doi:
更新日期:2005-03-01 00:00:00
abstract:PURPOSE:The present study aimed to investigate a novel adhesive system containing 0.2% chlorhexidine digluconate (CHX) for its ability to improve the stability of the adhesive interface compared with the use of 2% CHX as a therapeutic primer. Furthermore, the study aimed to confirm the inhibitory properties of these CH...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/12-239-L
更新日期:2013-11-01 00:00:00
abstract:OBJECTIVES:Published transmission electron microscopy analysis of in vitro resin-dentin bonds shows that, after 44 months, almost 70% of collagen fibrils from the hybrid layer disappear. Matrix metalloproteinases (MMPs) play an important role in that process and are thought to be the main factor responsible for the sol...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/12-425-L
更新日期:2014-03-01 00:00:00
abstract::The aims of this study were to investigate 1) the influence of cleansing methods after saliva contamination and 2) aging conditions (thermocycling and water storage) on zirconia shear bond strength (SBS) with a resin cement. One hundred and eighty zirconia specimens were sandblasted with 50 μm aluminum oxide particles...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/13-323-L
更新日期:2015-03-01 00:00:00
abstract::The stronger the ceramic material, the longer the restoration stays in the mouth. The current study evaluated the two-year clinical performance of a strong ceramic system, IPS Empress II, with increased strength on onlay/inlay restorations of molars. Teeth from 35 patients, including three premolars and 32 molars, wer...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/08-97
更新日期:2009-07-01 00:00:00
abstract::This article reviews the literature concerning the pulpal effects of composite resin restorations. A number of aspects are addressed, including the composite resin materials themselves, bacterial leakage, acid-etch technique, and dentin bonding procedures. Guidelines for pulpal protection are discussed. ...
journal_title:Operative dentistry
pub_type: 杂志文章,评审
doi:
更新日期:1989-01-01 00:00:00
abstract:OBJECTIVES:To evaluate the effect of application protocol in resin-enamel microshear bond strength (μSBS), in situ degree of conversion, and etching pattern of three universal adhesive systems. METHODS AND MATERIALS:Sixty-three extracted third molars were sectioned in four parts (buccal, lingual, and proximals) and di...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/15-213-L
更新日期:2016-09-01 00:00:00
abstract::This study determined the relationship between marginal adaptation to dentin cavity preparations, tensile bond strength of the restorations, and mechanical properties of the composites. Contraction gaps, tensile bond strengths, flexural strengths, and Young's modulus of eight commercial resin composites were determine...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1999-11-01 00:00:00
abstract:OBJECTIVES:This study evaluated the bond strength of luting systems for bonding glass fiber posts to root canal dentin. The hypothesis tested was that there are no differences in bond strength of glass fiber posts luted with different cement systems. METHODS:Forty bovine incisors were randomly assigned to five differe...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/11-035-L
更新日期:2012-01-01 00:00:00
abstract:OBJECTIVE:This clinical study aimed to assess the efficacies of mineral trioxide aggregate (MTA) and calcium hydroxide [Ca(OH)2] in the treatment of deep carious lesions by the direct complete caries removal technique. METHODS AND MATERIALS:A total of 100 permanent molar/premolar teeth were capped with either Ca(OH)2 ...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/16-110-C
更新日期:2017-09-01 00:00:00
abstract:PURPOSE::The purpose of this study was to quantify the relative strength tolerance of 1-day and 30-day amalgam following saturation contamination with water, saliva, blood, and handpiece lubricant oil during condensation. METHODS AND MATERIALS::Valiant PhD XT amalgam was tested with 300 shear-strength (N=15) and 120 c...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/18-091-L
更新日期:2019-03-01 00:00:00
abstract::A core foundation system is frequently used in endodontically treated teeth that suffer excessive loss of the coronal portion of their structure. The volumetric shrinkage of core foundation resins may create marginal gaps that influence the bonding ability and longevity of a restored tooth. Little is known about how a...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2005-09-01 00:00:00
abstract:OBJECTIVES:To evaluate the efficacy of a new light-cured anesthetic gel for pain control in adults undergoing rubber dam isolation for the restorative treatment of noncarious cervical lesions (NCCLs). METHODS AND MATERIALS:This study was a randomized, split-mouth, triple-blind, controlled trial. The sample comprised 5...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/18-130-C
更新日期:2020-03-01 00:00:00
abstract::The clinical performance of light curing resin composites is greatly influenced by the quality of the light-curing unit (LCU). Halogen LCUs are commonly used for curing composite materials. However, they have some drawbacks. The development of new, blue, super bright light emitting diodes (LED LCU) of 470-nm wavelengt...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2005-01-01 00:00:00
abstract:PURPOSE:This study evaluated the effect of thermocycling on the microtensile bond strength of four adhesive luting agents to GN-I CAD-CAM ceramic. The hypothesis tested was that thermocycling did not affect bonding effectiveness, irrespective of the luting agents used. MATERIALS AND METHODS:Ceramic specimens of two di...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/06-106
更新日期:2007-07-01 00:00:00
abstract::This study investigated the effect of nonrinse conditioners (ie, Ketac Nano Primer [KNP] and GC Self Conditioner [SC]) used as substrate pretreatment and their respective paste-paste resin-modified glass-ionomer cement (RMGIC) (ie, Ketac Nano [KN] and Fuji Filling LC [FF]) on microtensile bond strength to dentin and m...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/14-030-L
更新日期:2015-05-01 00:00:00
abstract::Various core materials with different shades affect the final color of high-translucency monolithic zirconia restorations. The blue core shows the greatest color difference in final zirconia restorations followed by metal, A3 dentin-shade resin core, and white core. ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/19-238-L
更新日期:2020-12-21 00:00:00
abstract::The role of silanes in the bonding of resin luting agents to glass-fiber posts (GFPs) is a controversial topic, and the question still remains whether post silanization is able to improve the retention of GFPs luted into root canals. Thus, this study was designed to determine whether evidence exists to justify silaniz...
journal_title:Operative dentistry
pub_type: 杂志文章,meta分析
doi:10.2341/14-330-O
更新日期:2015-11-01 00:00:00
abstract::Hard tissue modification by means of laser irradiation is becoming popular in dentistry, since it promotes assorted responses between the tooth and the restorative material. Some studies on the bond strength of adhesive systems to Nd:YAG irradiated teeth have shown distinctive behaviors when irradiation was applied be...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/05-110
更新日期:2006-09-01 00:00:00
abstract:CLINICAL RELEVANCE:Using a material that optimizes marginal seal when using a margin elevation technique to manage deep class II cavities should enhance clinical outcomes. SUMMARY:Objectives: The purpose of this laboratory study was to perform a tridimensional interfacial gap evaluation of class II cavities with ename...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/19-161-L
更新日期:2020-09-01 00:00:00
abstract::This study compared the amount of artificial plaque synthesized in vitro by Streptococcus sobrinus on various dental materials using radioisotopes. In particular, plaque-retaining capacities of new types of ceramics were the focus of this study. Specimens were fabricated from the following materials (one amalgam alloy...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2001-07-01 00:00:00
abstract::A technique of restoring Class II posterior restorations with resin-based composite and a pre-polymerized composite insert was presented. This technique is intended to aid the practitioner in obtaining tight, broad, proximal contacts without having to purchase special instruments or materials. This method is not time-...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:2004-07-01 00:00:00
abstract:OBJECTIVES:The aim of this investigation was to test the tensile bond strength (TBS) between different computer-aided-design/manufacturing (CAD/CAM) ceramics after conditioning using different universal adhesive systems and resin composite cement. METHODS AND MATERIALS:Substrates of four CAD/CAM ceramics-1) VITABLOCS ...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/18-017-L
更新日期:2019-07-01 00:00:00
abstract::This study investigated the effect of two base materials with different elastic moduli (F2000 and Vitrebond) on the fracture load of machinable ceramic inlays. Standardized MOD cavities were prepared in 18 human maxillary first or second premolars. The teeth were randomly assigned to three groups of six premolars each...
journal_title:Operative dentistry
pub_type: 杂志文章,随机对照试验
doi:10.2341/05-3
更新日期:2006-03-01 00:00:00
abstract::The nature of the hybrid layer (HL) following chemical treatment has not been resolved. The effects of chemical treatments and polishing on HL morphology and composition were investigated using micro-Raman spectroscopy and SEM. Polished and unpolished SingleBond adhesive/dentin (a/d) interfaces from the same tooth wer...
journal_title:Operative dentistry
pub_type: 临床试验,杂志文章,随机对照试验
doi:
更新日期:2004-11-01 00:00:00
abstract::This study evaluated in vitro the necessity of retention grooves in approximal boxes in class 2 preparations with faciolingually wide occlusal extensions (occlusal isthmus width 1.8 mm). Thirty-six class 2 mesio-occlusal cavities were prepared in sound human maxillary premolar teeth and divided into three groups of 12...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:
更新日期:1993-03-01 00:00:00
abstract:OBJECTIVES:To evaluate the clinical behavior of one-piece complete-coverage crowns and fixed partial dentures (FPDs) on teeth with vertical preparation without finish line biologically oriented preparation technique (BOPT). METHODS AND MATERIALS:This prospective study included 52 patients requiring treatment with rest...
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/17-124-C
更新日期:2018-09-01 00:00:00
abstract:PURPOSE:To investigate the effect of different light exposure times, shades, and thicknesses on the depth of cure (DOC) of bulk fill composites. METHODS AND MATERIALS:Two bulk fill composites, Tetric EvoCeram Bulk Fill (TBF) and Sonic Fill (SF), and a conventional composite, Filtek Supreme Ultra (FSU), were evaluated....
journal_title:Operative dentistry
pub_type: 杂志文章
doi:10.2341/16-057-L
更新日期:2017-09-01 00:00:00