Masking of High-Translucency Zirconia for Various Cores.

Abstract:

:Various core materials with different shades affect the final color of high-translucency monolithic zirconia restorations. The blue core shows the greatest color difference in final zirconia restorations followed by metal, A3 dentin-shade resin core, and white core.

journal_name

Oper Dent

journal_title

Operative dentistry

authors

Jung J,Roh BD,Kim JH,Shin Y

doi

10.2341/19-238-L

subject

Has Abstract

pub_date

2020-12-21 00:00:00

eissn

0361-7734

issn

1559-2863

pii

449739

pub_type

杂志文章
  • The effect of energy application sequence on the microtensile bond strength of different C-factor cavity preparations.

    abstract::This study investigated the effect of three equivalent radiant exposure energy application sequences (EASs): high intensity power (HIP: 1,177 mW/cm2, 40 seconds), low intensity power (LOP: 573 mW/cm2, 71 seconds) and ramp (RMP: 650 mW/cm2, 5 seconds, then the irradiance increases to 1047 mW/cm2, 37 seconds) on the mic...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/06-30

    authors: Maghaireh G,Bouschlicher MR,Qian F,Armstrong SR

    更新日期:2007-03-01 00:00:00

  • Effect of Light-Curing Exposure Time, Shade, and Thickness on the Depth of Cure of Bulk Fill Composites.

    abstract:PURPOSE:To investigate the effect of different light exposure times, shades, and thicknesses on the depth of cure (DOC) of bulk fill composites. METHODS AND MATERIALS:Two bulk fill composites, Tetric EvoCeram Bulk Fill (TBF) and Sonic Fill (SF), and a conventional composite, Filtek Supreme Ultra (FSU), were evaluated....

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/16-057-L

    authors: Rodriguez A,Yaman P,Dennison J,Garcia D

    更新日期:2017-09-01 00:00:00

  • Repair of non-carious amalgam margin defects.

    abstract::This study investigated the microleakage associated with the repair of non-carious amalgam defects using flowable resin composite. Occlusal amalgam preparations were accomplished on 36 non-carious mandibular molars. A standardized 40-micron marginal defect was made by condensing amalgam against a mylar matrix strip. S...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Roberts HW,Charlton DG,Murchison DF

    更新日期:2001-05-01 00:00:00

  • Online Only Articles.

    abstract::On occasion we receive manuscripts that we would like to publish, but do not have the page room to include in the print journal. For the full article, please go to www.jopdentonline.org or enter the provided address into your address bar. ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/1559-2863-43.5.561

    authors:

    更新日期:2018-09-01 00:00:00

  • Effects of pre-soaked retraction cords on the microcirculation of the human gingival margin.

    abstract::In the direct treatment of cervical lesions and to improve the impression-making procedure prior to fabricating indirect restorations, exposure of the gingival sulcus and control of hemorrhage or gingival fluid seepage are a prerequisite. For gingival displacement, cords impregnated with medicaments are widely used. I...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Fazekas A,Csempesz F,Csabai Z,Vág J

    更新日期:2002-07-01 00:00:00

  • In vivo occlusal wear of posterior composite restorations.

    abstract::The available and proposed methods for determining the in vivo occlusal wear values of classes 1 and 2 restorations made of resinfilled composite materials are critically reviewed. A methodology to be used to address the fundamental question of the link between the wear of the in vivo restorations and the relevant mec...

    journal_title:Operative dentistry

    pub_type: 杂志文章,评审

    doi:

    authors: Lewis G

    更新日期:1991-03-01 00:00:00

  • Minimally invasive treatment for esthetic management of severe dental fluorosis: a case report.

    abstract::Dental fluorosis is a developmental disturbance of enamel caused by excessive fluoride on ameloblasts during enamel formation. Patients often present to the dentist with a main goal of improving their esthetic appearance. This case report describes a minimally invasive technique for treating a severe case of enamel fl...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/12-238-S

    authors: Wang Y,Sa Y,Liang S,Jiang T

    更新日期:2013-07-01 00:00:00

  • Impact of Recently Developed Universal Adhesives on Tensile Bond Strength to Computer-aided Design/Manufacturing Ceramics.

    abstract:OBJECTIVES:The aim of this investigation was to test the tensile bond strength (TBS) between different computer-aided-design/manufacturing (CAD/CAM) ceramics after conditioning using different universal adhesive systems and resin composite cement. METHODS AND MATERIALS:Substrates of four CAD/CAM ceramics-1) VITABLOCS ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/18-017-L

    authors: Liebermann A,Detzer J,Stawarczyk B

    更新日期:2019-07-01 00:00:00

  • Cuspal Deflection in Premolar Teeth Restored with Bulk-Fill Resin-Based Composite Materials.

    abstract::The present study investigated the effect of three high-viscosity bulk-fill resin-based composite materials on cuspal deflection in natural teeth. Thirty-two sound maxillary premolar teeth with large slot mesio-occlusal-distal cavities were distributed into four groups (n=8). Three groups were restored with bulk-fill ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/16-072-L

    authors: Elsharkasi MM,Platt JA,Cook NB,Yassen GH,Matis BA

    更新日期:2018-01-01 00:00:00

  • Dynamic Viscoelastic Characterization of Bulk-fill Resin-based Composites and Their Conventional Counterparts.

    abstract::This study compared the viscoelastic properties of restorative and flowable bulk-fill resin-based composites (RBCs) with their conventional counterparts and evaluated the impact of aqueous solutions on viscoelastic properties. The materials examined included three conventional RBCs (Filtek Z350, Tetric N Ceram, and Be...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/19-005-L

    authors: Yap AU,Eweis AH,Yahya NA

    更新日期:2020-03-01 00:00:00

  • A suggested method for mixing direct filling restorative gallium alloy.

    abstract::Good wettability is one of the desirable physical properties of mercury-free gallium-based alloys (Gallium Alloy GF). However, wettability, while providing good adhesion to the cavity wall, has the adverse effect of causing stickiness to the inside of the capsule during mixing, and also to the metal hand instruments u...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Momoi Y,Asami Y,Ozawa M,Kohno A

    更新日期:1996-01-01 00:00:00

  • Influence of light activation on the volumetric change of core foundation resins.

    abstract::A core foundation system is frequently used in endodontically treated teeth that suffer excessive loss of the coronal portion of their structure. The volumetric shrinkage of core foundation resins may create marginal gaps that influence the bonding ability and longevity of a restored tooth. Little is known about how a...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Uekusa S,Miyazaki M,Rikuta A,Kurokawa H,Moore BK

    更新日期:2005-09-01 00:00:00

  • Bonding of Adhesive Luting Agents to Caries-affected Dentin Induced by a Microcosm Biofilm Model.

    abstract:OBJECTIVES:To evaluate the bond strength of adhesive luting agents applied to caries-affected dentin (CAD). METHODS:Thirty-six noncarious human third molars were abraded to expose an occlusal dentin surface. Caries lesions were induced in half of the samples using a microcosm biofilm model. Biofilm was cultivated unde...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/14-169-L

    authors: Peixoto AC,Bicalho AA,Isolan CP,Maske TT,Moraes RR,Cenci MS,Soares CJ,Faria-e-Silva AL

    更新日期:2015-05-01 00:00:00

  • Effect of Minocycline on the Durability of Dentin Bonding Produced with Etch-and-Rinse Adhesives.

    abstract:OBJECTIVES:To evaluate the effect of minocycline and chlorhexidine pretreatment of acid-etched dentin on the longevity of resin-dentin bond strength (μTBS) and nanoleakage of two-step etch-and-rinse adhesives. METHODS:Before application of Prime & Bond NT and Adper Single Bond 2 in occlusal dentin, the dentin surfaces...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/15-023-L

    authors: Loguercio AD,Stanislawczuk R,Malaquias P,Gutierrez MF,Bauer J,Reis A

    更新日期:2016-09-01 00:00:00

  • Marginal and internal adaptation of stratified compomer-composite Class II restorations.

    abstract::Different approaches have been proposed to improve the adaptation of Class II restorations, including applying low-elasticity modulus base liners. This in vitro fatigue test (or study) evaluated the influence of the compomer base-lining configuration on restoration adaptation. Direct Class II MOD box-shaped composite ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Dietschi D,Bindi G,Krejci I,Davidson C

    更新日期:2002-09-01 00:00:00

  • Effect of Bleaching Gel Viscosity on Tooth Whitening Efficacy and Pulp Chamber Penetration: An In Vitro Study.

    abstract:OBJECTIVES:Whitening efficacy has been related to hydrogen peroxide (HP) diffusion into tooth structure. However, little information is available relating rheological properties to whitening efficacy. The purpose was to evaluate the whitening efficacy and HP penetration level of a 10% HP gel at three different viscosit...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/17-099-L

    authors: Kwon SR,Pallavi F,Shi Y,Oyoyo U,Mohraz A,Li Y

    更新日期:2018-05-01 00:00:00

  • Influence of ceramic thickness and ceramic materials on fracture resistance of posterior partial coverage restorations.

    abstract::This study evaluated the influence of ceramic thickness and ceramic materials on fracture resistance of posterior partial coverage ceramic restorations. Forty extracted molars were allocated into four groups (n=10) to test for two variables: 1) the thickness of ceramic (1 mm or 2 mm) and 2) the ceramic materials (a li...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/12-459-L

    authors: Bakeman EM,Rego N,Chaiyabutr Y,Kois JC

    更新日期:2015-03-01 00:00:00

  • Review of the effectiveness of various tooth whitening systems.

    abstract::This review compares nine published studies conducted at the Indiana University School of Dentistry. Twenty-five products in four different systems were evaluated using the Trubyte Bioform Color Ordered Shade Guide and a Chroma Meter. The dentist-prescribed overnight bleaching delta mean shade guide value (DSGV) 10 we...

    journal_title:Operative dentistry

    pub_type: 杂志文章,评审

    doi:10.2341/08-74

    authors: Matis BA,Cochran MA,Eckert G

    更新日期:2009-03-01 00:00:00

  • Effect of residual water on dentin bond strength and hybridization of a one-bottle adhesive system.

    abstract::This research investigated the effects of wet and dry conditions of phosphoric acid etched dentin on resin bonding and determined the optimum moisture condition for resin bonding using an ethanol-based one-bottle adhesive system. Bovine dentin surfaces were etched with 35% phosphoric acid and rinsed with water. Under ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Nakaoki Y,Nikaido T,Burrow MF,Tagami J

    更新日期:2002-11-01 00:00:00

  • Hypoplastic enamel treatment in permanent anterior teeth of a child.

    abstract::In some patients with labial white stains involving the enamel and dentin, bleaching associated with a restorative procedure using composites may be an appropriate treatment alternative. Although bleaching makes the teeth and the stain whiter, the staining is less evident and easier to restore. Restorative procedures ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/12-284-T

    authors: Carvalho LD,Bernardon JK,Bruzi G,Andrada MA,Vieira LC

    更新日期:2013-07-01 00:00:00

  • The effect of light curing source on the residual yellowing of resin composites.

    abstract:PURPOSE:This study evaluated the amount of residual yellow in cured resin composites when polymerizing with either a quartz-tungsten-halogen (QTH) or blue light-emitting diode (LED). MATERIAL AND METHODS:Twelve shades (bleaching to conventional shades) of microfill, hybrid and microhybrid resin composite specimens (n ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/06-129

    authors: Brackett MG,Brackett WW,Browning WD,Rueggeberg FA

    更新日期:2007-09-01 00:00:00

  • Coronal fractures in posterior teeth.

    abstract::Coronal fractures of posterior teeth are not rare in clinical practice. Most of the time they constitute a restorational problem for the clinician, since they usually end below the free gingival crest. Two hundred coronal fractures of posterior teeth were examined in this study, with respect to several factors. Some o...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Lagouvardos P,Sourai P,Douvitsas G

    更新日期:1989-01-01 00:00:00

  • The Effect of Resin-modified Glass-ionomer Cement Base and Bulk-fill Resin Composite on Cuspal Deformation.

    abstract:OBJECTIVES:This study investigated cuspal deformation in teeth restored with different types of adhesive materials with and without a base. METHODS:Mesio-occluso-distal slot cavities of moderately large dimension were prepared on extracted maxillary premolars (n=24). Teeth were assigned to one of four groups and resto...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/14-331-L

    authors: Nguyen KV,Wong RH,Palamara J,Burrow MF

    更新日期:2016-03-01 00:00:00

  • Amalgam Strength Resistance to Various Contaminants.

    abstract:PURPOSE::The purpose of this study was to quantify the relative strength tolerance of 1-day and 30-day amalgam following saturation contamination with water, saliva, blood, and handpiece lubricant oil during condensation. METHODS AND MATERIALS::Valiant PhD XT amalgam was tested with 300 shear-strength (N=15) and 120 c...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/18-091-L

    authors: Roggenkamp C,Choi B,Chung J,Parhizkar R,Pham A,Robles R

    更新日期:2019-03-01 00:00:00

  • A Conservative Approach to Ceramic Veneers: A Case Report.

    abstract::Bonding to enamel has been shown to provide reliable results, and thus conservative tooth preparations are key to the success of ceramic bonded restorations. The wax-up is the first diagnostic tool available to evaluate discrepancies between current and ideal tooth proportions. The clinician's diagnostic mock-up provi...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/19-051-T

    authors: Jurado C,Watanabe H,Tinoco JV,Valenzuela HU,Perez GG,Tsujimoto A

    更新日期:2020-05-01 00:00:00

  • Exploring the nature of acid-resistant hybrid layer with wet bonding.

    abstract::The nature of the hybrid layer (HL) following chemical treatment has not been resolved. The effects of chemical treatments and polishing on HL morphology and composition were investigated using micro-Raman spectroscopy and SEM. Polished and unpolished SingleBond adhesive/dentin (a/d) interfaces from the same tooth wer...

    journal_title:Operative dentistry

    pub_type: 临床试验,杂志文章,随机对照试验

    doi:

    authors: Wang Y,Spencer P

    更新日期:2004-11-01 00:00:00

  • Rx for caries prevention: time line for home care. A software aid for communication of patient instructions for management of dental caries.

    abstract::Treatment of a caries active patient requires the clinician to be knowledgeable in the restorative and risk management issues with which these patients often present. Modifications of risk factors that promote dental caries play an important part in the long-term restorative success in these patients. Patient complian...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Newitter DA,Meiers JC,Kazemi RB

    更新日期:2002-03-01 00:00:00

  • Fit of veneers made by CAD-CAM and platinum foil methods.

    abstract::Veneers were fabricated by CEREC CAD-CAM and the platinum foil techniques for standardized preparations on 10 artificial teeth. Mesial preparation contacts were broken, but distal contacts remained intact. The veneers were cemented in a standardized manner to their teeth. The veneers and their attached cement were emb...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Suh PS,Johnson R,White SN

    更新日期:1997-05-01 00:00:00

  • Fluoride release from fluoride-containing materials.

    abstract::This in vitro study evaluated the amount of fluoride released from fluoride-containing materials over a period of 28 days. Six disk samples (2.06 +/- 0.06 cm2) were prepared of each material and divided at random into seven groups: Group 1: Chelon-Fil; Group 2: Chelon-Silver; Group 3: VariGlass; Group 4: Dyract; Group...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: de Araujo FB,García-Godoy F,Cury JA,Conceição EN

    更新日期:1996-09-01 00:00:00

  • Can Silanization Increase the Retention of Glass-fiber posts? A Systematic Review and Meta-analysis of In Vitro Studies.

    abstract::The role of silanes in the bonding of resin luting agents to glass-fiber posts (GFPs) is a controversial topic, and the question still remains whether post silanization is able to improve the retention of GFPs luted into root canals. Thus, this study was designed to determine whether evidence exists to justify silaniz...

    journal_title:Operative dentistry

    pub_type: 杂志文章,meta分析

    doi:10.2341/14-330-O

    authors: Moraes AP,Sarkis-Onofre R,Moraes RR,Cenci MS,Soares CJ,Pereira-Cenci T

    更新日期:2015-11-01 00:00:00