Reversal of dentin bonding to bleached teeth.

Abstract:

:Many studies have shown a considerable reduction in enamel bond strength of resin composite restorations when the bonding procedure is carried out immediately after bleaching. These studies claim that a certain waiting period is needed prior to restoration to reach the original bond strength values prior to bleaching. This study determined the effect of anti-oxidant applications on the bond strength values of resin composites to bleached dentin. Ninety human teeth extracted for orthodontic purposes were used in this study. The labial surface of each tooth was ground and flattened until dentin appeared. The polished surfaces were subjected to nine different treatments: 1) bleaching with gel (35% Rembrandt Virtuoso); 2) bleaching with gel + 10% sodium ascorbate (SA); 3) bleaching with gel + 10% butylhydroxyanisole (BHA); 4) bleaching with sol (35% hydrogen peroxide); 5) bleaching with sol + 10% sodium ascorbate; 6) bleaching with sol + 10% BHA; 7) bleaching with gel + immersed in artificial saliva for seven days; 8) bleaching with sol + immersed in artificial saliva for seven days; 9) no treatment. After bonding application, the resin composite in standard dimensions was applied to all specimens. The teeth were stored in distilled water at 37 degrees C for 24 hours and a universal testing machine determined their resistance to shear bond strength. The data was evaluated using ANOVA and Duncan tests. Bond strength in the bleached dentin group significantly decreased compared to the control group. On the other hand, the antioxidant treatment had a reversal effect on the bond strength to dentin. After the bleaching treatment, the 10% sodium ascorbate application was effective in reversing bond strength. In the samples where antioxidant was applied after the bleaching process, bonding strength in dentin tissue was at the same level as those teeth kept in artificial saliva for seven days.

journal_name

Oper Dent

journal_title

Operative dentistry

authors

Kaya AD,Türkün M

keywords:

subject

Has Abstract

pub_date

2003-11-01 00:00:00

pages

825-9

issue

6

eissn

0361-7734

issn

1559-2863

journal_volume

28

pub_type

临床试验,杂志文章,随机对照试验
  • Interfacial Evaluation of CAD/CAM Resin Inlays on the Cavity Floor Using Swept-source Optical Coherence Tomography.

    abstract:CLINICAL RELEVANCE:When a resin nanoceramic inlay is cemented using self-adhesive cement, a universal dentin adhesive can be applied to the prepared cavity. The application of the adhesive before self-adhesive cement placement provides similar or better interfacial adaptation than without the adhesive. SUMMARY:Purpose...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/19-141-L

    authors: Han SH,Shimada Y,Sadr A,Tagami J,Yang SE

    更新日期:2020-11-01 00:00:00

  • Adherence of plaque components to different restorative materials.

    abstract::This study compared the amount of artificial plaque synthesized in vitro by Streptococcus sobrinus on various dental materials using radioisotopes. In particular, plaque-retaining capacities of new types of ceramics were the focus of this study. Specimens were fabricated from the following materials (one amalgam alloy...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Kawai K,Urano M

    更新日期:2001-07-01 00:00:00

  • Effect of light activation mode on the incompatibility between one-bottle adhesives and light-cured composites: an in vitro shear bond strength study.

    abstract::This study examined the effect of different light activation modes for light-cured resin-based composites on the shear bond strength to dentin of two one-bottle adhesives with differing acidity. In this experimental study, a flat middle dentin surface was prepared on 110 extracted sound molars using a 600-grit polish ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/08-048-L

    authors: Shafiei F,Saffarpour A,Moradmand M,Alavi AA

    更新日期:2009-09-01 00:00:00

  • Influence of adhesive application duration on dentin bond strength of single-application bonding systems.

    abstract::This study examined the relationship between the bond agent application duration and the dentin bond strength of several single-application bonding systems. The restorative material/ bonding systems used were Reactmer, with its single-application bonding system Reactmer Bond (RB, Shofu Inc, Kyoto, Japan); Palfique Est...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Miyazaki M,Tsubota K,Onose H,Hinoura K

    更新日期:2002-05-01 00:00:00

  • Comparison of two methods of measuring dye penetration in restoration microleakage studies.

    abstract::This study compared the slice method of measuring microleakage to the whole-wall method. Forty-eight Class V direct metal restorations were placed in the buccal and lingual surfaces of 24 human molars. Following thermocycling and storage in 2% methylene blue stain for 12 hours, the teeth were sectioned and the restora...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Williams PT,Schramke D,Stockton L

    更新日期:2002-11-01 00:00:00

  • Restoration of occlusal vertical dimension in dental erosion caused by gastroesophageal reflux: case report.

    abstract::The authors describe a minimally invasive procedure for occlusal rehabilitation in a young patient presenting with mild mandibular prognathism and loss of occlusal vertical dimension caused by dental erosion from chronic gastroesophageal reflux. ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/09-110T

    authors: Reston EG,Closs LQ,Busato AL,Broliato GA,Tessarollo FR

    更新日期:2010-01-01 00:00:00

  • Cast gold molar proximal 1/2 crown.

    abstract::The molar proximal half-crown cast gold restoration may be an ideal choice for the conservative treatment of teeth with only one compromised proximal aspect. ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/10-T1

    authors: Otterholt DE

    更新日期:2010-03-01 00:00:00

  • Factors affecting light transmission of single-use, plastic light-curing tips.

    abstract::Recently, manufacturers introduced presterilized, single-use, plastic light-curing tips to be used either routinely or on patients with known or questionable communicable health concerns. The purpose of this study was to examine the effect of these single-use tips on light transmission compared to conventional fiber-o...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Rueggeberg FA,Caughman WF

    更新日期:1998-07-01 00:00:00

  • Online Only Articles.

    abstract::On occasion we receive manuscripts that we would like to publish, but do not have the page room to include in the print journal. For the full article, please go to www.jopdentonline.org or enter the provided address into your address bar. ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/1559-2863-43.5.561

    authors:

    更新日期:2018-09-01 00:00:00

  • Effect of Polishing Systems on Surface Roughness and Topography of Monolithic Zirconia.

    abstract::This study evaluated the effect of different chairside polishing systems on the surface roughness and topography of monolithic zirconia. Thirty-five monolithic zirconia specimens (Lava PLUS, 3M ESPE) were fabricated and divided into five groups of seven and polished with the following: Group 1 (WZ)-Dura white stone fo...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/15-064-L

    authors: Goo CL,Yap A,Tan K,Fawzy AS

    更新日期:2016-07-01 00:00:00

  • Microleakage and marginal hybrid layer formation of compomer restorations.

    abstract::The tested hypotheses of this study were that dentin enamel bonding agents (DBAs) proposed for compomers create a hybrid layer (HL) that seals the margins of Class V restorations and HL is free from voids or gaps on both enamel and dentin margins. For purposes of this study, Class V restorations (n = 70) were made in ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Prati C,Nucci C,Toledano M,García-Godoy F,Breschi L,Chersoni S

    更新日期:2004-01-01 00:00:00

  • Clinical comparison of bur- and laser-prepared minimally invasive occlusal resin composite restorations: two-year follow-up.

    abstract::This study evaluated the two-year clinical performance of two minimally invasive cavity preparation techniques, bur and laser, in Class I occlusal resin composite restorations. Twenty-seven patients, each having at least one pair of occlusal caries, were enrolled in this study. For each patient, one of the cavities wa...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/09-339-C

    authors: Yazici AR,Baseren M,Gorucu J

    更新日期:2010-09-01 00:00:00

  • Barcoll hardness of different resin-based composites cured by halogen or light emitting diode (LED).

    abstract::The clinical performance of light curing resin composites is greatly influenced by the quality of the light-curing unit (LCU). Halogen LCUs are commonly used for curing composite materials. However, they have some drawbacks. The development of new, blue, super bright light emitting diodes (LED LCU) of 470-nm wavelengt...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Bala O,Uçtasli MB,Tüz MA

    更新日期:2005-01-01 00:00:00

  • Inactivation of matrix-bound matrix metalloproteinases by cross-linking agents in acid-etched dentin.

    abstract:OBJECTIVES:Published transmission electron microscopy analysis of in vitro resin-dentin bonds shows that, after 44 months, almost 70% of collagen fibrils from the hybrid layer disappear. Matrix metalloproteinases (MMPs) play an important role in that process and are thought to be the main factor responsible for the sol...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/12-425-L

    authors: Scheffel DL,Hebling J,Scheffel RH,Agee K,Turco G,de Souza Costa CA,Pashley D

    更新日期:2014-03-01 00:00:00

  • Buonocore Memorial Lecture. Dentin caries: progression and clinical management.

    abstract::A fundamental issue of restorative treatment is assessing the different conditions of cases not only from tooth-to-tooth but also from the activity of each caries lesion and the size of the cavity. In addition, restorative treatment is sometimes carried out for prosthetic and cosmetic purposes and involves cutting sou...

    journal_title:Operative dentistry

    pub_type:

    doi:

    authors: Bjørndal L

    更新日期:2002-05-01 00:00:00

  • Influence of Tooth Pigmentation on H2O2 Diffusion and Its Cytotoxicity After In-office Tooth Bleaching.

    abstract:CLINICAL RELEVANCE:Pigments in tooth structures affect the diffusion of H2O2 through enamel and dentin. The bleaching methodology can be impacted. SUMMARY:Objective: The aim of this study was to evaluate the influence of the presence of pigments in tooth structures on the trans-enamel and trans-dentin diffusion of hyd...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/19-013-L

    authors: de Oliveira Duque CC,Soares DG,Briso A,Ortecho-Zuta U,de Oliveira Ribeiro RA,Hebling J,de Souza Costa CA

    更新日期:2020-11-01 00:00:00

  • Effect of Thermocycling, Degree of Conversion, and Cavity Configuration on the Bonding Effectiveness of All-in-One Adhesives.

    abstract::The aim of this study was to compare five all-in-one bonding agents with respect to microleakage, microtensile bond strength (μTBS), degree of conversion (DC) and the impact of cavity configuration. The materials tested were Adper Easy Bond, Clearfil S3 Bond, iBond, Optibond All-in-One, Xeno IV, and Adper Single Bond ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/14-185-LR1

    authors: El-Damanhoury HM,Gaintantzopoulou M

    更新日期:2015-09-01 00:00:00

  • Effect of cyclic loading on the microtensile bond strengths of total-etch and self-etch adhesives.

    abstract:OBJECTIVE:To evaluate the effect of mechanical loading on the microtensile bond strength (MTBS) of five adhesive systems to dentin. METHODS:Flat dentin surfaces from human molars were divided into five groups and bonded with total-etch self-priming adhesives (Single Bond, Prime&Bond NT and Prime&Bond XP), two-step sel...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/04-161

    authors: Toledano M,Osorio R,Albaladejo A,Aguilera FS,Tay FR,Ferrari M

    更新日期:2006-01-01 00:00:00

  • Influence of bonded amalgam restorations on the fracture strength of teeth.

    abstract::This study evaluated the effect of bonded amalgam on the fracture strength of teeth using five adhesive systems: Panavia 21, Amalgambond Plus, Imperva Dual Bond, All-Bond 2 Primer/Bonding Resin, and All-Bond 2 Primer/Liner F. Intact teeth and amalgam lined with Copalite were used as control groups. Large MOD preparati...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Oliveira JP,Cochran MA,Moore BK

    更新日期:1996-05-01 00:00:00

  • Rigidity and retention of ceramic root canal posts.

    abstract::Ceramic root-canal posts offer potential advantages over other types with respect to aesthetics and biocompatibility. Any post must be sufficiently rigid and retentive to withstand functional forces. Ceraposts (1.2 mm coronal diameter, ceramic, tapering, smooth posts) and Paraposts (1.25 mm, stainless-steel, parallel,...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Purton DG,Love RM,Chandler NP

    更新日期:2000-05-01 00:00:00

  • Factors associated with microleakage in Class II resin composite restorations.

    abstract::This in vitro study investigated the correlation between factors related to cavosurface marginal adaptation and microleakage in Class II cavities restored with a light- or chemical-activated resin composite. Standardized cavities were prepared in 40 molars that were randomly divided between both materials. Each of the...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/06-16

    authors: Idriss S,Abduljabbar T,Habib C,Omar R

    更新日期:2007-01-01 00:00:00

  • Cytotoxicity evaluation of single component dentin bonding agents.

    abstract::This study evaluated the cytotoxicity of four single component dentin bonding agents: Syntac Single Component, Prime & Bond 2.1, Single Bond and One Up Bond F. The test materials were applied on dentin discs of dentin barrier models in the same way as in the clinical procedures recommended by each manufacturer. Cell v...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Vajrabhaya LO,Pasasuk A,Harnirattisai C

    更新日期:2003-07-01 00:00:00

  • Influence of Conditioning Time of Universal Adhesives on Adhesive Properties and Enamel-Etching Pattern.

    abstract:OBJECTIVES:To evaluate the effect of application protocol in resin-enamel microshear bond strength (μSBS), in situ degree of conversion, and etching pattern of three universal adhesive systems. METHODS AND MATERIALS:Sixty-three extracted third molars were sectioned in four parts (buccal, lingual, and proximals) and di...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/15-213-L

    authors: Cardenas AM,Siqueira F,Rocha J,Szesz AL,Anwar M,El-Askary F,Reis A,Loguercio A

    更新日期:2016-09-01 00:00:00

  • Class II composite restorations: importance of cervical enamel in vitro.

    abstract:OBJECTIVE:This study evaluated the importance of enamel at the cervical margin for support and retention of a class II composite restoration in relation to fracture strength, fracture mode, and leakage. METHODS:Sixty-five newly extracted teeth were randomly divided into five groups. Within each group, standardized cla...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/10-126-L

    authors: Laegreid T,Gjerdet NR,Vult von Steyern P,Johansson AK

    更新日期:2011-03-01 00:00:00

  • Enamel Surface Changes After Exposure to Bleaching Gels Containing Carbamide Peroxide or Hydrogen Peroxide.

    abstract:OBJECTIVE:This study evaluated the differences in enamel color change, surface hardness, elastic modulus, and surface roughness between treatments with four bleaching gels containing carbamide peroxide (two at 10% and one each at 35%, and 45%) and two bleaching gels containing hydrogen peroxide (two at 40%). METHODS:E...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/15-010-L

    authors: Cvikl B,Lussi A,Moritz A,Flury S

    更新日期:2016-01-01 00:00:00

  • Prospective Clinical Study of Zirconia Full-coverage Restorations on Teeth Prepared With Biologically Oriented Preparation Technique on Gingival Health: Results After Two-year Follow-up.

    abstract:OBJECTIVES:To evaluate the clinical behavior of one-piece complete-coverage crowns and fixed partial dentures (FPDs) on teeth with vertical preparation without finish line biologically oriented preparation technique (BOPT). METHODS AND MATERIALS:This prospective study included 52 patients requiring treatment with rest...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/17-124-C

    authors: Agustín-Panadero R,Serra-Pastor B,Fons-Font A,Solá-Ruíz MF

    更新日期:2018-09-01 00:00:00

  • Degree of conversion and hardness of a silorane-based composite resin: effect of light-curing unit and depth.

    abstract:PURPOSE:To investigate the effect of different light-curing units and depths on the degree of conversion (DC) through Fourier transform infrared spectroscopy (FTIR) and Knoop Hardness Number (KHN) of a silorane-based composite resin (Filtek LS, 3M ESPE, St Paul, MN, USA) (LS). MATERIALS AND METHODS:LS specimens mounte...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/12-479

    authors: Torres SA,Silva GC,Maria DA,Campos WR,Magalhães CS,Moreira AN

    更新日期:2014-05-01 00:00:00

  • Effect of LED curing modes on cusp deflection and hardness of composite restorations.

    abstract::This in vitro study measured cusp deflection associated with MOD resin composite restorations in maxillary premolars with different curing light modes. Soft-start polymerization may reduce cusp deflection by reducing polymerization shrinkage stress. Forty maxillary premolars were mounted in stone and slot MOD cavities...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:

    authors: Alomari QD,Mansour YF

    更新日期:2005-11-01 00:00:00

  • Placement and replacement of amalgam restorations in Italy.

    abstract::The reasons for placement and replacement and the longevity of amalgam restorations were recorded by 62 Italian private practitioners. The survey compiled 1935 amalgam restorations inserted due to primary caries (59%) and failed restorations (41%). The clinical diagnosis of secondary caries constituted 59% of failures...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Mjör IA,Toffenetti F

    更新日期:1992-03-01 00:00:00

  • Cumulative assessment of factors leading to restorative decisions in an educational environment. A graphical demonstration using an in vitro case.

    abstract::Even though accuracy and inter-examiner variation assessments of borderline restorative items have been previously reported, no attempt has been made to replicate the effect of cumulative, sequential diagnostic and treatment planning decisions. This study assesses the cumulative effect of factors indicating restorativ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Maupomé G

    更新日期:2000-07-01 00:00:00