Rx for caries prevention: time line for home care. A software aid for communication of patient instructions for management of dental caries.

Abstract:

:Treatment of a caries active patient requires the clinician to be knowledgeable in the restorative and risk management issues with which these patients often present. Modifications of risk factors that promote dental caries play an important part in the long-term restorative success in these patients. Patient compliance to recommendations addressing modifiable caries risk factors for maintenance of oral health is important to long-term caries risk management. Effective dentist-patient or hygienist-patient communication is a first step to encouraging a proactive role by the patient. Others have reported verbal communication accompanied by written communication to result in better compliance compared to verbal communication, alone (Tagliacozzo & Ima, 1970; MacDonald, MacDonald & Phoenix, 1977; Baker & others, 1991; Harvey & Plumridge, 1991; Vukmir & others, 1993; Makoul, Arntson & Schofield, 1995). Further evidence shows that medical patients who misunderstand their treatment plans and associated instructions usually exhibit poor compliance to following directions (Cargil, 1992; Counsell, Geddis & Smith, 1993; Vukmir & others, 1993; Makoul & others, 1995; Mayeaux & others, 1996). Computer-generated (printed) instructions were shown to significantly increase compliance to emergency room instructions when compared to verbal or verbal + hand-written instructions (Vukmir & others, 1993). Written instructions for use in management of dental caries have not been widely addressed in the literature (Fuller & Harding, 1991; Benn & others, 1997). This report presents a novel computer-generated, graphic approach to written communication that recognizes the patient's need to be reminded that home care consists of daily cyclic events. The objective of this approach is to promote communication with and comprehension by a wider population range than what might be affected by text-only instructions. The software for this method is pre-loaded with recommendations that can be modified by the dentist or hygienist and can be easily adapted as part of a comprehensive disease management program used in the office.

journal_name

Oper Dent

journal_title

Operative dentistry

authors

Newitter DA,Meiers JC,Kazemi RB

keywords:

subject

Has Abstract

pub_date

2002-03-01 00:00:00

pages

204-7

issue

2

eissn

0361-7734

issn

1559-2863

journal_volume

27

pub_type

杂志文章
  • Two-year clinical performance of a polyacid-modified resin composite and a resin-modified glass-ionomer restorative material.

    abstract::This study compared the clinical performance of a polyacid-modified resin composite and a resin-modified glass-ionomer restorative material over two years. Thirty-four pairs of restorations of Compoglass and Fuji II LC were placed in caries-free cervical erosion/abfraction lesions without tooth preparation. Restoratio...

    journal_title:Operative dentistry

    pub_type: 临床试验,杂志文章,随机对照试验

    doi:

    authors: Brackett WW,Browning WD,Ross JA,Brackett MG

    更新日期:2001-01-01 00:00:00

  • Effect of time and polymerization cycle on the degree of conversion of a resin composite.

    abstract::The aim of this investigation was to verify the influence of 3 light curing units on the degree of conversion, using different irradiation conditions: 1) manufacturers' recommended times of photo-activation, 2) standardizing total energy density among the units and 3) standardizing energy density at the 450-490 nm wav...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/05-81

    authors: Schneider LF,Consani S,Ogliari F,Correr AB,Sobrinho LC,Sinhoreti MA

    更新日期:2006-07-01 00:00:00

  • Effect of residual water on dentin bond strength and hybridization of a one-bottle adhesive system.

    abstract::This research investigated the effects of wet and dry conditions of phosphoric acid etched dentin on resin bonding and determined the optimum moisture condition for resin bonding using an ethanol-based one-bottle adhesive system. Bovine dentin surfaces were etched with 35% phosphoric acid and rinsed with water. Under ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Nakaoki Y,Nikaido T,Burrow MF,Tagami J

    更新日期:2002-11-01 00:00:00

  • Effect of Different Light Sources and Enamel Preconditioning on Color Change, H2O2 Penetration, and Cytotoxicity in Bleached Teeth.

    abstract::This study evaluated the effects of acid etching of the enamel and the combination of different light sources (halogen light, light-emitting diodes [LEDs], and LED/Laser) and the bleaching product on color change, penetration of hydrogen peroxide (H2O2), and cytotoxicity over time. The color change (ΔE) and the amount...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/14-364-L

    authors: Gonçalves RS,Costa CA,Soares DG,dos Santos PH,Cintra LT,Briso AL

    更新日期:2016-01-01 00:00:00

  • Amalgam Strength Resistance to Various Contaminants.

    abstract:PURPOSE::The purpose of this study was to quantify the relative strength tolerance of 1-day and 30-day amalgam following saturation contamination with water, saliva, blood, and handpiece lubricant oil during condensation. METHODS AND MATERIALS::Valiant PhD XT amalgam was tested with 300 shear-strength (N=15) and 120 c...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/18-091-L

    authors: Roggenkamp C,Choi B,Chung J,Parhizkar R,Pham A,Robles R

    更新日期:2019-03-01 00:00:00

  • Bonding of photo and dual-cure adhesives to root canal dentin.

    abstract::This study evaluated the regional tensile bond strength of a dual-cure resin composite core material to root canal dentin using photo and dual-cure adhesives and different modes of polymerization. Nineteen extracted premolars were decoronated and their root canals prepared to a depth of 8 mm and a width of 1.4 mm usin...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Foxton RM,Nakajima M,Tagami J,Miura H

    更新日期:2003-09-01 00:00:00

  • Online Only Articles.

    abstract::On occasion we receive manuscripts that we would like to publish, but do not have the page room to include in the print journal. For the full article, please go to www.jopdentonline.org or enter the provided address into your address bar. ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/1559-2863-42.6.680

    authors:

    更新日期:2017-11-01 00:00:00

  • Clinical evaluation of a resin-modified glass-ionomer adhesive system.

    abstract::One hundred cervical caries-free, nonundercut lesions were restored in 13 patients of mean age 60.5 years, using Silux Plus or Estio LC resin composite bonded with Fuji Bond LC. Patients were recalled at 6 months and 1 year. A 1-year cumulative retention rate of 98% was recorded, while marginal staining was absent. ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Burrow MF,Tyas MJ

    更新日期:1998-11-01 00:00:00

  • Administration of ascorbic acid to prevent bleaching-induced tooth sensitivity: a randomized triple-blind clinical trial.

    abstract::This study evaluated the effect of ascorbic acid, 500 mg every eight hours, on bleaching-induced tooth sensitivity. A triple-blind, parallel design, and placebo-controlled randomized clinical trial was conducted on 39 adults. The pills (placebo or ascorbic acid) were administered three times per day for 48 hours; the ...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/12-483-C

    authors: de Paula EA,Kossatz S,Fernandes D,Loguercio AD,Reis A

    更新日期:2014-03-01 00:00:00

  • Effect of fractured or sectioned fragments on the fracture strength of different reattachment techniques.

    abstract::This study evaluated the effect of fractured or sectioned fragments on the fracture strength recovery of four techniques used for reattachment and resin composite buildups. Ninety-one sound, permanent lower central incisors were used. Half the teeth were fractured in the incisal-proximal edge; the other half had the i...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Loguercio AD,Mengarda J,Amaral R,Kraul A,Reis A

    更新日期:2004-05-01 00:00:00

  • Assessing the surface roughness of a posterior resin composite: effect of surface sealing.

    abstract::This study assessed the in vitro influence of surface sealing on the surface roughness of a posterior resin composite before and after toothbrushing. Thirty specimens (13 mm diameter x 1 mm high) were fabricated from Filtek-P60 resin composite and randomly assigned to three groups (n = 10): a non-sealed control and tw...

    journal_title:Operative dentistry

    pub_type: 临床试验,杂志文章,随机对照试验

    doi:

    authors: Takeuchi CY,Orbegoso Flores VH,Palma Dibb RG,Panzeri H,Lara EH,Dinelli W

    更新日期:2003-05-01 00:00:00

  • Bond durability of composite luting agents to ceramic when exposed to long-term thermocycling.

    abstract:PURPOSE:This study evaluated the effect of thermocycling on the microtensile bond strength of four adhesive luting agents to GN-I CAD-CAM ceramic. The hypothesis tested was that thermocycling did not affect bonding effectiveness, irrespective of the luting agents used. MATERIALS AND METHODS:Ceramic specimens of two di...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/06-106

    authors: Peumans M,Hikita K,De Munck J,Van Landuyt K,Poitevin A,Lambrechts P,Van Meerbeek B

    更新日期:2007-07-01 00:00:00

  • Labeled vs actual concentration of bleaching agents.

    abstract::The purpose of this study was to determine if the actual concentration of bleaching agents available in four different countries were the same as the label indicated and within the recommendations of the International Standard on Tooth Whitening. The method recommended for assaying peroxide by the United States Pharma...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/11-367-L

    authors: Matis BA,Matis JI,Wang Y,Monteiro S,Al-Qunaian TA,Millard R

    更新日期:2013-05-01 00:00:00

  • Treatment of Dentin Hypersensitivity Using Nano-Hydroxyapatite Pastes: A Randomized Three-Month Clinical Trial.

    abstract:OBJECTIVES:This randomized clinical trial tested the three-month desensitizing effect of two protocols using nano-hydroxyapatite formulations compared with Pro-Argin and fluoride varnish. METHODS:Twenty-eight subjects with 137 teeth presenting dentin exposure with a minimal hypersensitivity of four on the visual analo...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/15-145-C

    authors: Wang L,Magalhães AC,Francisconi-Dos-Rios LF,Calabria MP,Araújo D,Buzalaf M,Lauris J,Pereira JC

    更新日期:2016-07-01 00:00:00

  • Shear bond strengths of composite to dentin using six dental adhesive systems.

    abstract::The development of adhesive agents for bonding composite to dentin has rapidly evolved in recent years. It is postulated that dentin bond strengths in the range of 17 MPa are sufficient to resist the polymerization shrinkage of composite resins. The purpose of this study was to evaluate the shear bond strengths of the...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Triolo PT Jr,Swift EJ Jr,Barkmeier WW

    更新日期:1995-03-01 00:00:00

  • The Effect of Phosphoric Acid Pre-etching Times on Bonding Performance and Surface Free Energy with Single-step Self-etch Adhesives.

    abstract:OBJECTIVE:The purpose of this study was to evaluate the effect of phosphoric acid pre-etching times on shear bond strength (SBS) and surface free energy (SFE) with single-step self-etch adhesives. METHODS:The three single-step self-etch adhesives used were: 1) Scotchbond Universal Adhesive (3M ESPE), 2) Clearfil tri-S...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/15-221-L

    authors: Tsujimoto A,Barkmeier WW,Takamizawa T,Latta MA,Miyazaki M

    更新日期:2016-07-01 00:00:00

  • Influence of ceramic thickness and ceramic materials on fracture resistance of posterior partial coverage restorations.

    abstract::This study evaluated the influence of ceramic thickness and ceramic materials on fracture resistance of posterior partial coverage ceramic restorations. Forty extracted molars were allocated into four groups (n=10) to test for two variables: 1) the thickness of ceramic (1 mm or 2 mm) and 2) the ceramic materials (a li...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/12-459-L

    authors: Bakeman EM,Rego N,Chaiyabutr Y,Kois JC

    更新日期:2015-03-01 00:00:00

  • Effects of carbamide peroxide on the staining susceptibility of tooth-colored restorative materials.

    abstract::This study investigated the effects of an at-home bleaching gel containing 15% carbamide peroxide on the susceptibility of tooth-colored restorative materials to different staining solutions. The tooth-colored restoratives used in this study were a nano resin composite (Filtek Z350), a packable resin composite (Filtek...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/08-42

    authors: Yu H,Pan X,Lin Y,Li Q,Hussain M,Wang Y

    更新日期:2009-01-01 00:00:00

  • Fracture resistance of extensive amalgam restorations retained by pins, amalgapins and amalgam bonding agents.

    abstract::This in-vitro study compared the resistance of extensive amalgam restorations retained by either four Regular TMS Link Plus pins, four amalgapins, Amalgambond Plus, Amalgambond Plus with HPA, Scotchbond Multi-Purpose Plus, PQ Amalgam, Panavia F 2.0, All-Bond 2 or Resinomer. Ninety caries-free third molars were embedde...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/08-5

    authors: Imbery TA,Coudron J,Moon PC

    更新日期:2008-11-01 00:00:00

  • The effect of sandblasting and different primers on shear bond strength between yttria-tetragonal zirconia polycrystal ceramic and a self-adhesive resin cement.

    abstract:PURPOSE:To evaluate the effect of zirconia primers, air-abrasion, and tribochemical surface treatment methods on the shear bond strength between yttria-tetragonal zirconia polycrystal (Y-TZP) ceramic and self-adhesive resin cement. METHODS AND MATERIALS:Y-TZP ceramic surfaces were ground flat with 600-grit silicon car...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/13-149-L

    authors: Yi YA,Ahn JS,Park YJ,Jun SH,Lee IB,Cho BH,Son HH,Seo DG

    更新日期:2015-01-01 00:00:00

  • Degree of Conversion Contributes to Dentin Bonding Durability of Contemporary Universal Adhesives.

    abstract:CLINICAL RELEVANCE:The degree of conversion of contemporary universal adhesives positively correlates with the bond strength to dentin. The correlation is more marked after thermocycling, suggesting that a high degree of conversion is required for long-term dentin bonding durability. SUMMARY:Purpose: The objectives of...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/19-165-L

    authors: Tichy A,Hosaka K,Abdou A,Nakajima M,Tagami J

    更新日期:2020-09-01 00:00:00

  • Impact of Recently Developed Universal Adhesives on Tensile Bond Strength to Computer-aided Design/Manufacturing Ceramics.

    abstract:OBJECTIVES:The aim of this investigation was to test the tensile bond strength (TBS) between different computer-aided-design/manufacturing (CAD/CAM) ceramics after conditioning using different universal adhesive systems and resin composite cement. METHODS AND MATERIALS:Substrates of four CAD/CAM ceramics-1) VITABLOCS ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/18-017-L

    authors: Liebermann A,Detzer J,Stawarczyk B

    更新日期:2019-07-01 00:00:00

  • Effects of secondary curing on indirect posterior composite resins.

    abstract::This study was designed to compare strength, elastic modulus (stiffness), and hardness for five composite resin materials that are used for laboratory-fabricated posterior composite restorations. Ten specimens of each material were processed according to the manufacturer's instructions. Statistical analysis indicated ...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Reinhardt JW,Boyer DB,Stephens NH

    更新日期:1994-11-01 00:00:00

  • SEM evaluation of the hybrid layer after cavity preparation with Er:YAG laser.

    abstract::This study compared the thickness of the hybrid layer formed using Scotchbond Multi-Purpose Plus, Single Bond 2, Prime & Bond 2.1 and Xeno III on a dentin surface prepared with a diamond bur in a high speed handpiece or prepared with an Er:YAG laser used with two parameters of pulse energy (200 and 400 mJ) and two par...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/07-84

    authors: de Barceleiro MO,Dias KR,Sales HX,Silva BC,Barceleiro CG

    更新日期:2008-05-01 00:00:00

  • Criteria for the Replacement of Restorations: Academy of Operative Dentistry European Section.

    abstract::The replacement of a restoration is one of the most common procedures in dentistry. However, the criteria for such intervention, excluding catastrophic failure and persistent discomfort and pain, continue to be the subject of considerable debate. The decision-making process remains subjective on the part of the treati...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/15-058-O

    authors: Wilson N,Lynch CD,Brunton PA,Hickel R,Meyer-Lueckel H,Gurgan S,Pallesen U,Shearer AC,Tarle Z,Cotti E,Vanherle G,Opdam N

    更新日期:2016-09-01 00:00:00

  • Nanoleakage at the dentin adhesive interface vs microtensile bond strength.

    abstract::Excessive etching of the dentin may decrease bond strength because the adhesive may fail to completely infiltrate to the base of the over-etched demineralized collagen network. The purpose of the present study was to evaluate the influence of increasing etching times on the microtensile bond strength of Single Bond an...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Paul SJ,Welter DA,Ghazi M,Pashley D

    更新日期:1999-05-01 00:00:00

  • In vitro bonding performance of self-etch adhesives: II--ultramorphological evaluation.

    abstract:OBJECTIVE:To study the interfacial ultra-morphology formed by "all-in-one" self-etch adhesives. METHODS:Forty-nine extracted molars were assigned to one of five all-in-one adhesives: Adper Prompt L-Pop (AP, 3M ESPE); Clearfil S3 Bond (S3, Kuraray); G-Bond (GB, GC America); iBond (iB, Heraeus Kulzer) and Xeno IV (XE, D...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:10.2341/07-133

    authors: Perdigão J,Lopes MM,Gomes G

    更新日期:2008-09-01 00:00:00

  • Barcoll hardness of different resin-based composites cured by halogen or light emitting diode (LED).

    abstract::The clinical performance of light curing resin composites is greatly influenced by the quality of the light-curing unit (LCU). Halogen LCUs are commonly used for curing composite materials. However, they have some drawbacks. The development of new, blue, super bright light emitting diodes (LED LCU) of 470-nm wavelengt...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Bala O,Uçtasli MB,Tüz MA

    更新日期:2005-01-01 00:00:00

  • Two-year clinical performance of self-etching adhesive systems in composite restorations of anterior teeth.

    abstract:OBJECTIVE:The aim of this study was to evaluate the two-year clinical performance of Class III, IV, and V composite restorations using a two-step etch-and-rinse adhesive system (2-ERA) and three one-step self-etching adhesive systems (1-SEAs). MATERIAL AND METHODS:Two hundred Class III, IV, and V composite restoration...

    journal_title:Operative dentistry

    pub_type: 杂志文章,随机对照试验

    doi:10.2341/11-397-C

    authors: Barcellos DC,Batista GR,Silva MA,Pleffken PR,Rangel PM,Fernandes VV Jr,Di Nicoló R,Torres CR

    更新日期:2013-05-01 00:00:00

  • Microleakage of dentin/amalgam alloy bonding agents: results after 1 year.

    abstract::The purpose of this study was to evaluate the 1-year results of the dentin bond (DBS)/viscous resin liner combinations Amalgambond Plus, Tenure/Panavia, Syntac/Dual Cem, and All-Bond 2/Liner F in reducing microleakage in class 5 cavity preparations restored with an admixed or a spherical amalgam alloy and to compare t...

    journal_title:Operative dentistry

    pub_type: 杂志文章

    doi:

    authors: Meiers JC,Turner EW

    更新日期:1998-01-01 00:00:00