Chimerism analysis following nonmyeloablative stem cell transplantation using a new cell subset separation method: Robosep.

abstract：:A layer of L-glycine-molecule-imprinted polyaniline (LMIP-PANI) polymer film has been modified on a carbon fiber electrode for the determination of L-glycine standard samples and L-glycine in cerebrospinal fluid of wistar mice. It has been found that a linear relationship exists between current and concentration for t...

journal_title：Bio-medical materials and engineering

authors： Zeng H,Wang D,Yu J

更新日期：2014-01-01 00:00:00

abstract：:In this study, biocompatibility of 17-4 PH stainless steel foam for biomedical implant applications was investigated. 17-4 PH stainless steel foams having porosities in the range of 40-82% with an average pore size of around 600 μm were produced by space holder-sintering technique. Sintered foams were precipitation ha...

journal_title：Bio-medical materials and engineering

authors： Mutlu I,Oktay E

更新日期：2011-01-01 00:00:00

abstract：:Age-related macular degeneration (ARMD) and intraocular neovascular diseases have been treated clinically by anti-VEGF antibody drug bevacizumab. However, the use of bevacizumab in the treatment of retinal neovascular diseases has been limited due to the short half-life and frequent injections. In this research, novel...

journal_title：Bio-medical materials and engineering

authors： Hu CC,Chaw JR,Chen CF,Liu HW

更新日期：2014-01-01 00:00:00

abstract：BACKGROUND:Retearing mechanism after transosseous equivalent (TOE) rotator cuff repair has not been fully clarified yet. OBJECTIVE:The purposes of this study were to compare the stress distribution pattern in the tendon stump between knotted and knotless TOE repair and to investigate the role of suture tension applied...

journal_title：Bio-medical materials and engineering

authors： Sano H,Tokunaga M,Noguchi M,Inawashiro T,Irie T,Abe H,Yokobori AT

更新日期：2017-01-01 00:00:00

abstract：:The bonding strength of porcelains to metals depends on the oxide layer between the porcelain and the metal. Oxidation of a metal surface increases the bonding strength, whereas excessive oxidation decreases it. Titanium and its alloys are gaining acceptance for dental use since they exhibit excellent biocompatibility...

journal_title：Bio-medical materials and engineering

authors： Oshida Y,Hashem A

更新日期：1993-01-01 00:00:00

abstract：:Few studies have stressed on the sensitivity of stress distribution in different mechanical properties of the articular cartilage and subchondral bone. The purpose of this study was to establish parametric variations of mechanical factors individually and examine how these biomechanical effects influenced the cartilag...

journal_title：Bio-medical materials and engineering

authors： Wang Y,Wei HW,Yu TC,Cheng CK

更新日期：2007-01-01 00:00:00

abstract：:A crucial role during the implementation of volume visualization is to identify the optimal transfer function, since the vital information and structure can be highlighted and revealed. The boundary of the volume is shared by respective portion of the two materials formed out of it, which causes undesirable thickening...

journal_title：Bio-medical materials and engineering

authors： Yang F,Zhang L,Lu W,Zuo W,Wang K,Zhang H,Li Y

更新日期：2014-01-01 00:00:00

abstract：:A size-based blood cell sorting model with a micro-fence structure is proposed in the frame of immersed boundary and lattice Boltzmann method (IB-LBM). The fluid dynamics is obtained by solving the discrete lattice Boltzmann equation, and the cells motion and deformation are handled by the immersed boundary method. A ...

journal_title：Bio-medical materials and engineering

authors： Wei Q,Xu YQ,Tian FB,Gao TX,Tang XY,Zu WH

更新日期：2014-01-01 00:00:00

abstract：:A robust method for inducing bone-formation without an autograft has not been established. Currently, both platelet-rich plasma (PRP) and bone morphogenetic protein (BMP) have been widely investigated for their clinical use in such cases. However, their synergistic effect is still controversial and previously shown di...

journal_title：Bio-medical materials and engineering

authors： Yoshida K,Sumita Y,Marukawa E,Harashima M,Asahina I

更新日期：2013-01-01 00:00:00

abstract：:The present review surveys studies on physical-chemical properties and biological response of living tissues to NiTi (Nitinol) carried out recently, aiming at an understanding of the place of this material among the implant alloys in use. Advantages of shape memory and superelasticity are analyzed in respect to functi...

journal_title：Bio-medical materials and engineering

authors： Shabalovskaya SA

更新日期：2002-01-01 00:00:00

abstract：:Poly(propylene fumarate-co-ethylene glycol) random (PPF-1) and block (PPF-2) copolymer oligomers were prepared. Comparing the setting characteristics of PPF-1 and PPF-2 with comonomer n-vinyl pyrrolidone (n-VP) and swelling characteristics of cured PPF-1 and PPF-2, lower setting temperature and setting time was observ...

journal_title：Bio-medical materials and engineering

authors： Jayabalan M,Thomas V,Sreelatha PK

更新日期：2000-01-01 00:00:00

abstract：:Based upon previous research on the relation between hip prosthesis designs and strain distributions in a proximal femur model, a prototype of a "physiological" hip prosthesis was designed and manufactured. Strain gauge measurements on a dry femur before and after implantation of this prosthesis were made in different...

journal_title：Bio-medical materials and engineering

authors： Vander Sloten J,Labey L,Van Audekercke R,Van der Perre G

更新日期：1993-04-01 00:00:00

abstract：:Recognition of lung cancer cells is very important to the clinical diagnosis of lung cancer. In this paper we present a novel method to extract the structure characteristics of lung cancer cells and automatically recognize their types. Firstly soft mathematical morphology methods are used to enhance the grayscale imag...

journal_title：Bio-medical materials and engineering

authors： Chen YC,Hu KH,Li FZ,Li SY,Su WF,Huang ZY,Hu YX

更新日期：2006-01-01 00:00:00

abstract：:Fifty two ceramic femoral heads have been investigated after implantation. All heads had articulated against ultra high molecular weight polyethylene (UHMWPE) cups. Examination of the heads shows changes in sphericity and surface roughness due to the wear. The behaviour of these retrieved heads after clinical use conf...

journal_title：Bio-medical materials and engineering

authors： Fernández-Fairén M,Sala P,Gil FJ

更新日期：2006-01-01 00:00:00

abstract：:A number of materials have been considered as sources of grafts to repair bone defects. Here, we examined the possibility of creating in situ-forming gels from sodium carboxymethylcellulose (CMC) and poly(ethyleneimine) (PEI) for use as an in vivo carrier of demineralized bone matrix (DBM). The interaction between ani...

journal_title：Bio-medical materials and engineering

authors： Kim KS,Kang YM,Lee JY,Kim ES,Kim CH,Min BH,Lee HB,Kim JH,Kim MS

更新日期：2009-01-01 00:00:00

abstract：:Facial nerve paralysis is a common disease due to nerve damage. Most approaches for evaluating the degree of facial paralysis rely on a set of different facial movements as commanded by doctors. Therefore, automatic recognition of the patterns of facial movement is fundamental to the evaluation of the degree of facial...

journal_title：Bio-medical materials and engineering

authors： Wang T,Dong J,Sun X,Zhang S,Wang S

更新日期：2014-01-01 00:00:00

abstract：:Biocompatible metals have been suggested as revolutionary biomaterials for bone-grafting therapies. Although metals and their alloys are widely and successfully used in producing biomedical implants due to their good mechanical properties and corrosion resistance, they have a lack in bioactivity. Therefore coating of ...

journal_title：Bio-medical materials and engineering

authors： Saleh MM,Touny AH,Al-Omair MA,Saleh MM

更新日期：2016-05-12 00:00:00

abstract：:Dry emulsion containing curcumin (DE-CUR) was prepared for oral delivery of poorly water-soluble curcumin, and its oral bioavailability and antiasthmatic efficacy was evaluated. After comparison of the solubility of curcumin in various oils, Plurol® Oleique CC497 was selected to be the oil phase due to its higher solu...

journal_title：Bio-medical materials and engineering

authors： Jang DJ,Kim ST,Oh E,Lee K

更新日期：2014-01-01 00:00:00

abstract：:Hyaluronic acid (HA) was used as an internal phase additive to improve the loading efficiency of ofloxacin, a hydrophilic drug encapsulated by hydrophobic polylactic-co-glycolic acid (PLGA) materials, through a double emulsion (water-in-oil-in-water) solvent extraction/evaporation method. Results from laser distributi...

journal_title：Bio-medical materials and engineering

authors： Wu G,Chen L,Li H,Wang YJ

更新日期：2014-01-01 00:00:00

abstract：:To obtain an appropriate model for the simulation of the biomechanical behavior of brain tissue and the deformation of ventricles, in particular, we have developed a novel computerized plain strain finite element model. For optimum results, a multiple loading solutions approach using various tissue parameters for the ...

journal_title：Bio-medical materials and engineering

authors： Farmanzad F,Najarian S,Eslamee MR,Seddighi AS

更新日期：2007-01-01 00:00:00

abstract：BACKGROUND:Adhesive resin composite, which is used to bond orthodontic bracket to tooth surface is exposed to the influence of wear by tooth brushing and wear may influence loosening of the bracket. OBJECTIVE:The aim of this study was to evaluate in vitro the effect of tooth brushing on the adhesion strength of orthod...

journal_title：Bio-medical materials and engineering

authors： Durgesh BH,Alhijji S,Hashem MI,Al Kheraif AA,Durgesh P,Elsharawy M,Vallittu PK

更新日期：2016-09-28 00:00:00

abstract：:In this work composite materials, based on quartz fibers and epoxy resins, were employed with the aim to restore damaged teeth. The composite materials were chosen because they show biomechanical features very similar to that of the dentine, the main constituent of the tooth. Extracted teeth were rebuilt with two diff...

journal_title：Bio-medical materials and engineering

authors： Visco AM,Calabrese L,Campo N,Torrisi L,Oteri G,Lo Giudice G,Cicciù D

更新日期：2006-01-01 00:00:00

abstract：:The in vivo and in vitro drug release profiles from a self-setting bioactive CaO-SiO2-P2O5 glass bone cement containing indomethacin as a model drug were investigated. The cement containing 2% and 5% indomethacin (IMC) powder hardened within 5 min after mixing with ammonium phosphate buffer. After setting, in vitro dr...

journal_title：Bio-medical materials and engineering

authors： Otsuka M,Nakahigashi Y,Matsuda Y,Kokubo T,Yoshihara S,Fujita H,Nakamura T

更新日期：1997-01-01 00:00:00

abstract：:DNA-binding proteins are involved and play a crucial role in a lot of important biological processes. Hence, the identification of the DNA-binding proteins is a challenging and significant problem. In order to reveal the intrinsic information correlated to DNA-binding, nine classes of candidate features based on diffe...

journal_title：Bio-medical materials and engineering

authors： Guan C,Niu X,Shi F,Yang K,Li N

更新日期：2015-01-01 00:00:00

abstract：:Two different types of colloidal lipid particles are presented and compared as innovative carrier systems. Size distribution and storage stability of formulations produced by hot high pressure homogenisation in lab and medium scale production were investigated by laser diffractometry (LD) and photon correlation spectr...

journal_title：Bio-medical materials and engineering

authors： Saupe A,Wissing SA,Lenk A,Schmidt C,Müller RH

更新日期：2005-01-01 00:00:00

abstract：:The aim of this study is to design a statistical segmentation technique to allow extraction of grey matter, white matter and cerebral spinal fluid volumes from diffusion tensor imaging. Four channel maps of the DTI are used as the input features, which provide more information for brain tissue segmentation compared wi...

journal_title：Bio-medical materials and engineering

authors： Wen Y,He L

更新日期：2014-01-01 00:00:00

abstract：:Three patterned systems aiming at the control of mammalian cell behavior are presented. The determinant feature common to these systems is the spatial distribution of extracellular matrix (ECM) proteins (mainly collagen) on polymer substrates. This distribution differs from one system to another with respect to the sc...

journal_title：Bio-medical materials and engineering

authors： Dupont-Gillain CC,Alaerts JA,Dewez JL,Rouxhet PG

更新日期：2004-01-01 00:00:00

abstract：BACKGROUND:In order to manufacture pharmaceutical products, real-time monitoring in the manufacturing process is necessary, but large equipment cost is required to achieve it. OBJECTIVE:The aim of this research is to use ultra-violet-visible spectroscopy along with chemometrics procedure to simultaneously carry out qu...

journal_title：Bio-medical materials and engineering

authors： Peerapattana J,Hattori Y,Otsuka M

更新日期：2019-01-01 00:00:00

abstract：BACKGROUND:Previously we found that a group of phosphorylated proteins (SIBLINGs) in bone binds with the Ti-device, and increases the early bone formation around the Ti-implants remarkably. From these results, we explained the biochemical mechanism of a strong bond between living bone and Ti, which was discovered by Br...

journal_title：Bio-medical materials and engineering

authors： Song Q,Yagami K,Furusawa T,Takita H,Kurasaki M,Tokura S,Morimoto K,Sammons R,Iku S,Kuboki Y

更新日期：2020-01-01 00:00:00

abstract：:Experimental results on the platelet adhesion, and CHO cell adhesion and growth onto nonionic surfactant which is composed of a long alkyl chain (n = 12-18) as the hydrophobic part, and a polyethyleneoxide (PEO) segment (n = 10-23) as the hydrophilic part coated and air-plasma treated PSf surfaces are presented in ter...

journal_title：Bio-medical materials and engineering

authors： Khang G,Jeong BJ,Lee HB,Park JB

更新日期：1995-01-01 00:00:00