Abstract:
:Few studies have stressed on the sensitivity of stress distribution in different mechanical properties of the articular cartilage and subchondral bone. The purpose of this study was to establish parametric variations of mechanical factors individually and examine how these biomechanical effects influenced the cartilage and subchondral bone plate stress fields in the hip joint. A finite element model including acetabulum and proximal femur was established to study the stress change associated with the thinning of cartilage, the increasing of subchondral bone modulus and the thickening of subchondral bone plate individually. The stress distributions in bone/cartilage interface were evaluated. Sensitivity of the stress magnitudes to the parametric changes was also analyzed. The results indicated that cartilage thinning has more significant effect than subchondral bone modulus increasing or thickening on the shear stress levels in subchondral bone/cartilage interface. Subchondral bone plate modulus increasing has mild effect on the shear stress in subchondral bone/cartilage interface. Cartilage thinning acts as a major influence on the development of the articular cartilage damage.
journal_name
Biomed Mater Engjournal_title
Bio-medical materials and engineeringauthors
Wang Y,Wei HW,Yu TC,Cheng CKsubject
Has Abstractpub_date
2007-01-01 00:00:00pages
241-7issue
4eissn
0959-2989issn
1878-3619journal_volume
17pub_type
杂志文章abstract::The finite element (FE) method has been widely used to investigate the mechanism of traumatic brain injuries (TBIs), because it is technically difficult to quantify the responses of the brain tissues to the impact in experiments. One of technical challenges to build a FE model of a human head is the modeling of the ce...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-171666
更新日期:2017-01-01 00:00:00
abstract::Motor imagery EEG-based BCI has advantages in the assistance of human control of peripheral devices, such as the mobile robot or wheelchair, because the subject is not exposed to any stimulation and suffers no risk of fatigue. However, the intensive training necessary to recognize the numerous classes of data makes it...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151409
更新日期:2015-01-01 00:00:00
abstract::The fretting corrosion of five materials for implant suprastructures (cast-titanium, machined-titanium, gold alloy, silver-palladium alloy and chromium-nickel alloy), was investigated in vitro, the materials being galvanically coupled to a titanium ball-and-socket-joint with tetrafluoroethylene under mechanical load. ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2003-01-01 00:00:00
abstract::The present review surveys studies on physical-chemical properties and biological response of living tissues to NiTi (Nitinol) carried out recently, aiming at an understanding of the place of this material among the implant alloys in use. Advantages of shape memory and superelasticity are analyzed in respect to functi...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章,评审
doi:
更新日期:2002-01-01 00:00:00
abstract::Electroencephalograph (EEG) signals feature extraction and processing is one of the most difficult and important part in the brain-computer interface (BCI) research field. EEG signals are generally unstable, complex and have low signal-noise ratio, which is difficult to be analyzed and processed. To solve this problem...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-141113
更新日期:2014-01-01 00:00:00
abstract:BACKGROUND:Electrospinning is a highly effective method in order to generate nano-scaled fibers. In conventional electrospinning technique, geometry of nanofibers are mostly random due to the chaotic behavior of polymer jet. OBJECTIVE:Purpose of this study is to produce aligned nanofibers from PVP polymers with advanc...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-181017
更新日期:2018-01-01 00:00:00
abstract::Poly(propylene fumarate-co-ethylene glycol) random (PPF-1) and block (PPF-2) copolymer oligomers were prepared. Comparing the setting characteristics of PPF-1 and PPF-2 with comonomer n-vinyl pyrrolidone (n-VP) and swelling characteristics of cured PPF-1 and PPF-2, lower setting temperature and setting time was observ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2000-01-01 00:00:00
abstract::Various tissue-engineered vascular grafts have been studied in order to overcome the clinical disadvantages associated with conventional prostheses. However, previous tissue-engineered vascular grafts have possessed insufficient mechanical properties and thus have generally required either preoperative cellular manipu...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-141023
更新日期:2014-01-01 00:00:00
abstract::The effect of hydroxyapatite sol (HAm) which is composed of unheating hydroxyapatite microcrystal particle on cell proliferation and alkaline phophatase activity in osteoblastic MC3T3-E1 cells, was examined in the presence or absence of fetal calfe serum (FCS) in the medium. In the absence of FCS, HAm inhibited the ce...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2002-01-01 00:00:00
abstract::To evaluate the influence of Zn on the formation of hydroxyapatite (HA), zinc-containing glass 58S4Z was prepared by substitution of CaO with 4 wt% ZnO in 58S bioactive glass, and Zn-containing simulated body fluid (ZnSBF) was prepared as soaking fluid. During the soaking, all samples could induce the deposition of HA...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2006-01-01 00:00:00
abstract::A novel technique and product for carpal tunnel microscopic surgical procedures using a modified medical device containing a head as a surgical scalpel under light guidance were designed and studied. The novel design of the medical device was developed and applied in a new carpal tunnel microscopic surgical procedure ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151303
更新日期:2015-01-01 00:00:00
abstract::Sino-atrial node cells (SANCs) play a significant role in rhythmic firing. To investigate their role in arrhythmia and interactions with the atrium, computer simulations based on cellular dynamic mathematical models are generally used. However, the large-scale computation usually makes research difficult, given the li...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151365
更新日期:2015-01-01 00:00:00
abstract::Porous polyethylene (PP or Medpor) is an alloplastic material worldwide used for craniofacial reconstruction. Although several clinical studies are available, there is a lack as regard the genetic effects. Because PP is always fixed on bone and the mechanism by which PP acts on osteoblasts is unknown, we therefore att...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2008-01-01 00:00:00
abstract::Low-dose computed tomography reconstruction is an important issue in the medical imaging domain. Sparse-view has been widely studied as a potential strategy. Compressed sensing (CS) method has shown great potential to reconstruct high-quality CT images from sparse-view projection data. Nonetheless, low-contrast struct...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151437
更新日期:2015-01-01 00:00:00
abstract::Bioartificial liver support provides a bridge to transplantation which is at present the only proven specific treatment for acute liver failure. In this paper, a novel multi-coaxial hollow fiber bioreactor so-called "Fibre-in-Fibre FIF Bioartificial liver device" with three compartments is experimentally and mathemati...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-130762
更新日期:2013-01-01 00:00:00
abstract::Two different types of colloidal lipid particles are presented and compared as innovative carrier systems. Size distribution and storage stability of formulations produced by hot high pressure homogenisation in lab and medium scale production were investigated by laser diffractometry (LD) and photon correlation spectr...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2005-01-01 00:00:00
abstract::Polylactic acid (PLA)/styrene-ethylene-butylene-styrene (SEBS) composites were prepared by melt blending. Differential scanning calorimetry (DSC) and wide angle X-ray diffraction (WXRD) were used to characterize PLA and PLA/SEBS composites in terms of their melting behavior and crystallization. Curves from thermal gra...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151300
更新日期:2015-01-01 00:00:00
abstract::A new training system that can adjust training intensity and indicate the center pressure of a subject was proposed by applying controlled electric current to the Magneto-Rheological damper. The experimental studying on the muscular activities were performed in lower extremities during maintaining and moving exercises...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-130811
更新日期:2014-01-01 00:00:00
abstract:BACKGROUND:Platelet-rich plasma (PRP) has been used to solubilize freeze-dried chitosan (CS) formulations to form injectable implants for tissue repair. OBJECTIVE:To determine whether the in vitro performance of the formulations depends on the type of PRP preparation used to solubilize CS. METHODS:Formulations contai...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-191058
更新日期:2019-01-01 00:00:00
abstract::High order partial least squares (HOPLS) is a novel data processing method. It is highly suitable for building prediction model which has tensor input and output. The objective of this study is to build a prediction model of the relationship between sinoatrial node field potential and high glucose using HOPLS. The thr...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-151482
更新日期:2015-01-01 00:00:00
abstract::Experimental results on the platelet adhesion, and CHO cell adhesion and growth onto nonionic surfactant which is composed of a long alkyl chain (n = 12-18) as the hydrophobic part, and a polyethyleneoxide (PEO) segment (n = 10-23) as the hydrophilic part coated and air-plasma treated PSf surfaces are presented in ter...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1995-01-01 00:00:00
abstract::Polycrystalline diamond (PCD) exhibits excellent abrasive characteristics and is commonly used as loose grains for precision machining of hard ceramics and other materials that are difficult to grind and polish. In the present study, we investigated using bonded PCD for polishing dental porcelain, for which a lustrous...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-2010-0642
更新日期:2010-01-01 00:00:00
abstract:OBJECTIVE:To characterize the structure and to evaluate the cytotoxicity of cellulose nanowhiskers (CNW) prepared from cotton linters. METHODS:A series of CNW dispersions was prepared by hydrolyzing cotton linters with sulfuric acid. The structure of CNW was characterized by scanning electron microscopy (SEM), transmi...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-2012-0697
更新日期:2012-01-01 00:00:00
abstract::In this work composite materials, based on quartz fibers and epoxy resins, were employed with the aim to restore damaged teeth. The composite materials were chosen because they show biomechanical features very similar to that of the dentine, the main constituent of the tooth. Extracted teeth were rebuilt with two diff...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2006-01-01 00:00:00
abstract::Three patterned systems aiming at the control of mammalian cell behavior are presented. The determinant feature common to these systems is the spatial distribution of extracellular matrix (ECM) proteins (mainly collagen) on polymer substrates. This distribution differs from one system to another with respect to the sc...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2004-01-01 00:00:00
abstract:BACKGROUND:Gait analysis, such as portable gait rhythmogram (PGR), provides objective information that helps in the quantitative evaluation of human locomotion. OBJECTIVE:The purpose of this study was to assess the reliability of PGR in post-stroke patients. METHODS:Two raters (A and B) examined 48 post-stroke patien...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-206007
更新日期:2020-01-01 00:00:00
abstract::A multidirectional pin-on-plate reciprocating machine was used to compare the wear performance of UHMWPE sliding against cast cobalt chrome (CoCr) plates that were either untreated or coated with Amorphous Diamond Like Carbon (ADLC). The test conditions were based on a 1/5 scale model representative of in vivo motion ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2001-01-01 00:00:00
abstract::In this study, design optimization of a tooth implant-supported fixed prosthesis was investigated theoretically. A three-dimensional finite element analysis was utilized to simulate the stress distribution and deformation, with an emphasis on the material selection for various parts of the prosthesis. This mandibular ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:2005-01-01 00:00:00
abstract::The 5(and 6)-carboxyfluorescein diacetate (C-FDA) is used for a rapid and continuous counting of living cells. Nonfluorescent C-FDA is converted into fluorescent 5(and 6)-carboxyfluorescein (C-F) by the reaction with esterase, which is an enzyme of living cells. The conversion makes it possible to count the number of ...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:
更新日期:1991-01-01 00:00:00
abstract::The ion selective transport plays an important role in the function of cell membranes, and promotes the application of artificial permeable membranes. This phenomenon has been studied in case for different diameters and functional groups of nanopores. In this work, we focus on the effect of anions on cation selectivit...
journal_title:Bio-medical materials and engineering
pub_type: 杂志文章
doi:10.3233/BME-130822
更新日期:2014-01-01 00:00:00