Muscle moment-arms: a key element in muscle-force estimation.

abstract：:The drug-eluting stent (DES) has become the gold standard worldwide for the treatment of cardiovascular diseases. In recent years, an innovative variation of the DES with micro-sized drug reservoirs has been introduced. It allows programmable drug delivery with both spatial and temporal control and has several potenti...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Hsiao HM,Chiu YH

更新日期：2013-01-01 00:00:00

abstract：:The behavior of blood cells and vessel compliance significantly influence hemodynamic parameters, which are closely related to the development of aortic dissection. Here the two-phase non-Newtonian model and the fluid-structure interaction (FSI) method are coupled to simulate blood flow in a patient-specific dissected...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Qiao Y,Zeng Y,Ding Y,Fan J,Luo K,Zhu T

更新日期：2019-05-01 00:00:00

abstract：:Biomechanical imaging techniques have been developed for soft tissue characterisation and detection of breast tumours. Harmonic motion imaging (HMI) uses a focused ultrasound technology to generate a harmonic radiation force in a localised region inside a soft tissue. The resulting dynamic response is used to map the ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Zhao X,Pelegri AA

更新日期：2014-01-01 00:00:00

abstract：:Dialyser manufacturers only provide limited information about mass removal under well-defined flow and solute conditions in commercially available dialysers for hemodialysis. This computational study aimed at assessing the solute transport efficiency in a dialyser for different geometries (fiber lengths and diameters)...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Eloot S,Vierendeels J,Verdonck P

更新日期：2006-12-01 00:00:00

abstract：:Much attention has been devoted to how playground swing amplitudes are built up by swinger techniques, i.e. body actions. However, very little attention has been given to the requirements that such swinger techniques place on the swinger himself. The purpose of this study was to find out whether different swinger tech...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Linge SO

更新日期：2012-01-01 00:00:00

abstract：:In this study we aim at investigating the applicability of underwater 3D motion capture based on submerged video cameras in terms of 3D accuracy analysis and trajectory reconstruction. Static points with classical direct linear transform (DLT) solution, a moving wand with bundle adjustment and a moving 2D plate with Z...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Silvatti AP,Cerveri P,Telles T,Dias FA,Baroni G,Barros RM

更新日期：2013-01-01 00:00:00

abstract：:In this paper, we introduce a new general method for kinematic analysis of rigid multi body systems subject to holonomic constraints. The method extends the standard analysis of kinematically determinate rigid multi body systems to the over-determinate case. This is accomplished by introducing a constrained optimisati...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Andersen MS,Damsgaard M,Rasmussen J

更新日期：2009-08-01 00:00:00

abstract：:At present, computer assisted surgery systems help orthopaedic surgeons both plan and perform surgical procedures. To enable these systems to function, it is crucial to have at one's disposal 3D models of anatomical structures, surgical tools and prostheses (if required). This paper analyses and compares three methods...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Filippi S,Motyl B,Bandera C

更新日期：2009-02-01 00:00:00

abstract：:This paper presents a biomechanical analysis of the cervical C5-C6 functional spine unit before and after the anterior cervical discectomy and fusion. The aim of this work is to study the influence of the medical procedure and its instrumentation on range of motion and stress distribution. First, a three-dimensional f...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Fernandes PC,Fernandes PR,Folgado JO,Levy Melancia J

更新日期：2012-01-01 00:00:00

abstract：:Three-dimensional finite element models of the thoracolumbar junction (T12-L2) and isolated L1 vertebra were developed to investigate the role of material properties and loading conditions on vertebral stresses and strains to predict fracture risk. The geometry of the vertebrae was obtained from computed tomography im...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Erdem I,Truumees E,van der Meulen MC

更新日期：2013-01-01 00:00:00

abstract：:The clinical importance of measuring local pulse wave velocity (PWV), has encouraged researchers to develop several local methods to estimate it. In this work, we proposed a new method, the sum-of-squares method [Formula: see text], that allows the estimations of PWV by using simultaneous measurements of blood pressur...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Abdessalem KB,Flaud P,Zobaidi S

更新日期：2018-01-01 00:00:00

abstract：:The phenotype expression in X-linked adrenoleukodystrophy is one of the most intriguing issues of the disease, because there is no general correlation between the type of ABCD1 gene mutation and the clinical phenotype. In this study, we use the cross-impact analysis to build a descriptively quantitative relationship b...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Yan S,Wu G

更新日期：2010-06-01 00:00:00

abstract：:The purpose of this study was to identify one or more performance-based criteria that may be used to generate predictive optimal control simulations of submaximal pedaling. Two-legged pedaling simulations were generated based on minimizing muscle activation, muscle stress, metabolic energy, time derivative of muscle f...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Gidley AD,Marsh AP,Umberger BR

更新日期：2019-01-01 00:00:00

abstract：:The purpose of this study is to develop a system capable of performing calculation of temporal gait parameters using two low-cost wireless accelerometers and artificial intelligence-based techniques as part of a larger research project for conducting human gait analysis. Ten healthy subjects of different ages particip...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： López-Nava IH,Muñoz-Meléndez A,Pérez Sanpablo AI,Alessi Montero A,Quiñones Urióstegui I,Núñez Carrera L

更新日期：2016-01-01 00:00:00

abstract：:The aim of this study was to present a new training algorithm using artificial neural networks called multi-objective least absolute shrinkage and selection operator (MOBJ-LASSO) applied to the classification of dynamic gait patterns. The movement pattern is identified by 20 characteristics from the three components o...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Andrade A,Costa M,Paolucci L,Braga A,Pires F,Ugrinowitsch H,Menzel HJ

更新日期：2015-01-01 00:00:00

abstract：:To analyze the biomechanical effect of syndesmotic screw through three and four cortices, a total of 12 finite element models simulating healthy ankles, tibiofibular syndesmosis injured ankles, and post-operative ankles by screw fixations through three or four cortices were built. A set of biomechanical data were obta...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Li H,Chen Y,Qiang M,Zhang K,Jiang Y,Zhang Y,Jia X

更新日期：2018-04-01 00:00:00

abstract：:The aim of this study is to evaluate the fracture union or non-union for a specific patient that presented oblique fractures in tibia and fibula, using a mechanistic-based bone healing model. Normally, this kind of fractures can be treated through an intramedullary nail using two possible configurations that depends o...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Alierta JA,Pérez MA,Seral B,García-Aznar JM

更新日期：2016-09-01 00:00:00

abstract：:Adolescent Idiopathic Scoliosis (AIS) is a 3D spinal deformity characterized by curvature and rotation of the spine. Markerless surface topography (ST) analysis has been proposed for diagnosing and monitoring AIS to reduce the X-ray radiation exposure to patients. This method captures scans of the cosmetic deformity o...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ghaneei M,Ekyalimpa R,Westover L,Parent EC,Adeeb S

更新日期：2019-05-01 00:00:00

abstract：:When designing any rehabilitation, sportswear or exoskeleton device the mechanical behaviour of the body segment must be known, specifically the skin, because an excessive tissue strain may lead to ulceration and bedsores. To date, it is not known if the kinematic variability between subjects have an effect on the ski...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Barrios-Muriel J,Romero Sánchez F,Alonso Sánchez FJ,Rodríguez Salgado D

更新日期：2019-11-01 00:00:00

abstract：:Accident statistics show that more than 80% of car-to-pedestrian collisions (CPC) occur when pedestrians cross the road. It is very important to establish a finite element model with natural walking posture to study the kinematics and injury mechanism of pedestrians. In this study, a finite element model of six-year-o...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Li H,Li K,Huang Y,Lv W,Cui S,He L,Ruan JS,Wang C

更新日期：2020-09-02 00:00:00

abstract：:Microarchitectural finite element models have become a key tool in the analysis of trabecular bone. Robust, accurate, and validated constitutive models would enhance confidence in predictive applications of these models and in their usefulness as accurate assays of tissue properties. Human trabecular bone specimens fr...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Baumann AP,Shi X,Roeder RK,Niebur GL

更新日期：2016-01-01 00:00:00

abstract：:The presence of a spiral arterial blood flow pattern in humans has been widely accepted. It is believed that this spiral component of the blood flow alters arterial haemodynamics in both positive and negative ways. The purpose of this study was to determine the effect of spiral flow on haemodynamic changes in aorta-re...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Javadzadegan A,Simmons A,Barber T

更新日期：2016-01-01 00:00:00

abstract：:In almost all finite element (FE) studies in dentistry, virtual forces are applied directly to dentures. The purpose of this study was to develop a FE model with non-linear contact simulation using an antagonist as force transmitter and to compare this with a similar model that uses direct force transmission. Furtherm...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Rand A,Stiesch M,Eisenburger M,Greuling A

更新日期：2017-08-01 00:00:00

abstract：:The aim of this paper is to use a poroviscohyperelastic (PVHE) model, which is developed based on the porohyperelastic (PHE) model to explore the mechanical deformation properties of single chondrocytes. Both creep and relaxation responses are investigated by using finite element analysis models of micropipette aspira...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Nguyen TD,Oloyede A,Gu Y

更新日期：2016-01-01 00:00:00

abstract：:The effect on the signal amplitude of ultrasonic waves propagating along cortical bone plates was modelled using a 2D Finite Difference code. Different healing stages, represented by modified fracture geometries were introduced to the plate model. A simple transverse and oblique fracture filled with water was introduc...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dodd SP,Miles AW,Gheduzzi S,Humphrey VF,Cunningham JL

更新日期：2007-10-01 00:00:00

abstract：:Big data and its approaches are generally helpful for healthcare and biomedical sectors for predicting the disease. For trivial symptoms, the difficulty is to meet the doctors at any time in the hospital. Thus, big data provides essential data regarding the diseases on the basis of the patient's symptoms. For several ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ampavathi A,Saradhi TV

更新日期：2021-01-11 00:00:00

abstract：:Cell migration relies on traction forces in order to propel a cell. Several computational models have been developed that help explain the trajectory that cells take during migration, but little attention has been placed on traction forces during this process. Here, we investigated the spatiotemporal dynamics of cell ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Han SJ,Sniadecki NJ

更新日期：2011-05-01 00:00:00

abstract：:Polyurethane (PU) foam is a material often used in biomechanical experiments and demands for the definition of crushable foam plasticity (CFP) in numerical simulations of the primary stability and deformation of implants, to describe the crushing behaviour appropriately. Material data of PU foams with five different d...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Schulze C,Vogel D,Sander M,Bader R

更新日期：2019-01-01 00:00:00

abstract：:Most of musculoskeletal models (MSKM) estimate the tibiofemoral joint reaction load at a single point or do not support large lower-limb ranges. This study aimed to adapt a generic MSKM that allows large knee and hip flexions to compute medial and lateral tibiofemoral contact forces (TFCF) during gait and squat tasks....

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Bedo BLS,Catelli DS,Lamontagne M,Santiago PRP

更新日期：2020-08-01 00:00:00

abstract：:In order to have research on the deformation characteristics and mechanical properties of human red blood cells (RBCs), finite element models of RBC optical tweezers stretching and atomic force microscope (AFM) indentation were established. Non-linear elasticity of cell membrane was determined by using the neo-Hookean...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wang Y,Sang J,Ao R,Ma Y,Fu B

更新日期：2020-11-01 00:00:00