abstract：:Woodpeckers can withstand a fierce impact during pecking without any brain injury. Although directly involved in the whole pecking, the role of the jaw apparatus played in the impact-resistant process of woodpeckers is still not fully clear. We employed finite element analysis, impact tests in vivo, and post-traumatic...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Xu P,Ni Y,Lu S,Liu S,Zhou X,Fan Y

更新日期：2021-01-13 00:00:00

abstract：:Big data and its approaches are generally helpful for healthcare and biomedical sectors for predicting the disease. For trivial symptoms, the difficulty is to meet the doctors at any time in the hospital. Thus, big data provides essential data regarding the diseases on the basis of the patient's symptoms. For several ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ampavathi A,Saradhi TV

更新日期：2021-01-11 00:00:00

abstract：:The decompensated univentricular circulation is identified as one of the most challenging conditions and the application of the mechanical circulatory support (MCS) devices is proposed as therapeutic option for Fontan failure. Modelling methodologies are reported to identify the optimized types, extent and duration of...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Rubtsova E,Markov A,Selishchev S,Karimov JH,Telyshev D

更新日期：2021-01-11 00:00:00

abstract：:This study evaluated the polymerization shrinkage stress of three tooth preparation designs for indirect ceramic overlay by finite element analysis: isthmus preparation (IST); without isthmus preparation (wIST); and non-retentive preparation (nRET). The models were created based in prepared dental typodonts and were d...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： de Andrade GS,Pinto ABA,Tribst JPM,Chun EP,Borges ALS,de Siqueira Ferreira Anzaloni Saavedra G

更新日期：2021-01-07 00:00:00

abstract：:The change in maximum total point motion (ΔMTPM) is used to predict long-term risk of tibial baseplate loosening, however, effects of registration error on ΔMTPM have not been quantified for marker-based and model-based radiostereometric analysis (RSA). Registration errors for marker-based and model-based RSA were app...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Niesen AE,Hull ML

更新日期：2021-01-05 00:00:00

abstract：:Musculoskeletal research questions regarding the prevention or rehabilitation of the hand can be addressed using inverse dynamics simulations when experiments are not possible. To date, no complete human hand model implemented in a holistic human body model has been fully developed. The aim of this work was to develop...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Engelhardt L,Melzner M,Havelkova L,Fiala P,Christen P,Dendorfer S,Simon U

更新日期：2020-12-10 00:00:00

abstract：:Pedestrians are the most vulnerable road user and represent about 23% of the road traffic deaths in the world. A finite element (FE) model corresponding to a 5th percentile female pedestrian (F05-PS) was developed by morphing the Global Human Body Models Consortium (GHBMC) 50th percentile male pedestrian (M50-PS) mode...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Pak W,Meng Y,Schap J,Koya B,Gayzik FS,Untaroiu CD

更新日期：2020-12-01 00:00:00

abstract：:Anterior percutaneous endoscopic cervical discectomy (APECD) is a common treatment for cervical spondylotic radiculopathy (CSR). In this study, the effects of various channel diameters and approach angles on cervical vertebrae on postoperative outcomes in APECD surgery were explored. A finite element model of intact c...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Sun MS,Yuchi CX,Cai XY,Du CF,Mo ZJ

更新日期：2020-12-01 00:00:00

abstract：:The normalcy index (NI) has been implemented by several studies as a simple index for quantitatively analyzing diffident gait abnormalities, such as children with cerebral palsy and idiopathic toe-walkers. However, whether the NI can be used in anterior cruciate ligament (ACL) deficiency with different types of menisc...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Liu X,Huang H,Ren S,Rong Q,Ao Y

更新日期：2020-11-01 00:00:00

abstract：:In order to have research on the deformation characteristics and mechanical properties of human red blood cells (RBCs), finite element models of RBC optical tweezers stretching and atomic force microscope (AFM) indentation were established. Non-linear elasticity of cell membrane was determined by using the neo-Hookean...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wang Y,Sang J,Ao R,Ma Y,Fu B

更新日期：2020-11-01 00:00:00

abstract：:Marker-based motion capture presents the problem of gaps, which are traditionally processed using motion capture software, requiring intensive manual input. We propose and study an automated method of gap-filling that uses inverse kinematics (IK) to close the loop of an iterative process to minimize error, while nearl...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Camargo J,Ramanathan A,Csomay-Shanklin N,Young A

更新日期：2020-11-01 00:00:00

abstract：:To explore which TLIF techniques are advantageous in reducing the risk of complications and conducive to bone fusion under the vibration. The L1-L5 finite element lumbar model was modified to simulate three different TLIF techniques (a unilateral standard cage, a crescent-shaped cage, and bilateral standard cages). Th...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wang QD,Guo LX

更新日期：2020-10-13 00:00:00

abstract：:Remodelling and adaptation of bone within the pelvis is believed to be influenced by the mechanical strains generated during locomotion. Variation in the cortical bone thickness observed in the prenatal ilium has been linked to the musculoskeletal loading associated with in utero movements; for example the development...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Watson PJ,Fagan MJ,Dobson CA

更新日期：2020-10-01 00:00:00

abstract：:The aim of this study was to develop a generic musculoskeletal model of a healthy 10-year-old child and examine the effects of geometric scaling on the calculated values of lower-limb muscle forces during gait. Subject-specific musculoskeletal models of five healthy children were developed from in vivo MRI data, and t...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Hainisch R,Kranzl A,Lin YC,Pandy MG,Gfoehler M

更新日期：2020-09-17 00:00:00

abstract：:Transcatheter aortic valve replacement (TAVR) strongly depends on the calcification patterns, which may lead to a malapposition of the stented valve and complication onsets in terms of structure kinematics and paravalvular leakage (PVL). From one anatomical-resembling model of the aortic root, six configurations with ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Luraghi G,Matas JFR,Beretta M,Chiozzi N,Iannetti L,Migliavacca F

更新日期：2020-09-14 00:00:00

abstract：:Accident statistics show that more than 80% of car-to-pedestrian collisions (CPC) occur when pedestrians cross the road. It is very important to establish a finite element model with natural walking posture to study the kinematics and injury mechanism of pedestrians. In this study, a finite element model of six-year-o...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Li H,Li K,Huang Y,Lv W,Cui S,He L,Ruan JS,Wang C

更新日期：2020-09-02 00:00:00

abstract：:Design optimization for cementless hip prosthesis signifies one of the key topics of research to improve its performances. However, majority of the studies have not considered the presence of uncertainties while it has been shown that a deterministic optimization leads to an unreliable design. In this paper, a multi-o...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dammak K,El Hami A

更新日期：2020-09-01 00:00:00

abstract：:Most of musculoskeletal models (MSKM) estimate the tibiofemoral joint reaction load at a single point or do not support large lower-limb ranges. This study aimed to adapt a generic MSKM that allows large knee and hip flexions to compute medial and lateral tibiofemoral contact forces (TFCF) during gait and squat tasks....

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Bedo BLS,Catelli DS,Lamontagne M,Santiago PRP

更新日期：2020-08-01 00:00:00

abstract：:Modeling tumor growth in biological systems is a challenging problem with important consequences for diagnosis and treatment of various forms of cancer. This growth process requires large simulation complexity due to evolving biological and chemical processes in living tissue and interactions of cellular and vascular ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Puzyrev V,Łoś M,Gurgul G,Calo V,Dzwinel W,Paszyński M

更新日期：2019-12-01 00:00:00

abstract：:When designing any rehabilitation, sportswear or exoskeleton device the mechanical behaviour of the body segment must be known, specifically the skin, because an excessive tissue strain may lead to ulceration and bedsores. To date, it is not known if the kinematic variability between subjects have an effect on the ski...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Barrios-Muriel J,Romero Sánchez F,Alonso Sánchez FJ,Rodríguez Salgado D

更新日期：2019-11-01 00:00:00

abstract：:Fretting and corrosion at the taper-head interface in total hip arthroplasty has been reported as a potential cause of early failure of the implant system. The finite element (FE) method can be used to study the mechanics at the taper junction that are difficult to assess experimentally. Taper mismatch is one of the f...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Bitter T,Khan I,Marriott T,Lovelady E,Verdonschot N,Janssen D

更新日期：2019-10-01 00:00:00

abstract：:Osteoporosis (OP) is common with advancing age. Several studies have shown a strong correlation between OP and otosclerosis. However, no studies have investigated OP of the malleus, incus or stapes in the human middle ear, its effect on middle ear transfer function. Here, we investigate whether these three ossicles de...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Zhou L,Shen N,Feng M,Liu H,Duan M,Huang X

更新日期：2019-10-01 00:00:00

abstract：:Monitoring of skin blood flow oscillations related with mechanical activity of vessels is a very useful modality during diagnosis of peripheral hemodynamic disorders. In this study, we developed a new model and technique for real-time conversion of skin temperature into skin blood flow oscillations, and vice versa. Th...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Sagaidachnyi A,Fomin A,Usanov D,Skripal A

更新日期：2019-09-01 00:00:00

abstract：:Oral cancer surgery has a negative influence on the quality of life (QOL). As a result of the complex physiology involved in oral functions, estimation of surgical effects on functionality remains difficult. We present a user-friendly biomechanical simulation of tongue surgery, including closure with suturing and scar...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Kappert KDR,van Alphen MJA,van Dijk S,Smeele LE,Balm AJM,van der Heijden F

更新日期：2019-06-01 00:00:00

abstract：:The purpose of this study was to create and validate a standardized framework for the evaluation of the ankle stiffness of two designs of 3D printed ankle foot orthoses (AFOs). The creation of four finite element (FE) models allowed patient-specific quantification of the stiffness and stress distribution over their sp...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ielapi A,Lammens N,Van Paepegem W,Forward M,Deckers JP,Vermandel M,De Beule M

更新日期：2019-06-01 00:00:00

abstract：:Adolescent Idiopathic Scoliosis (AIS) is a 3D spinal deformity characterized by curvature and rotation of the spine. Markerless surface topography (ST) analysis has been proposed for diagnosing and monitoring AIS to reduce the X-ray radiation exposure to patients. This method captures scans of the cosmetic deformity o...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ghaneei M,Ekyalimpa R,Westover L,Parent EC,Adeeb S

更新日期：2019-05-01 00:00:00

abstract：:The combination of computational methods with 3D printing allows for the control of scaffolds microstructure. Lately, triply periodic minimal surfaces (TPMS) have been used to design porosity-controlled scaffolds for bone tissue engineering (TE). The goal of this work was to assess the mechanical properties of TPMS Gy...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Castro APG,Ruben RB,Gonçalves SB,Pinheiro J,Guedes JM,Fernandes PR

更新日期：2019-05-01 00:00:00

abstract：:Complexity represents the adaptability of the biological system, therefore the assessment of complexity during tasks such as walking may be particularly useful when attempting to better understand the recovery processes after stroke. The purpose of this study was to determine whether the complexity of lower extremity ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dugan EL,Combs-Miller SA

更新日期：2019-05-01 00:00:00

abstract：:The behavior of blood cells and vessel compliance significantly influence hemodynamic parameters, which are closely related to the development of aortic dissection. Here the two-phase non-Newtonian model and the fluid-structure interaction (FSI) method are coupled to simulate blood flow in a patient-specific dissected...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Qiao Y,Zeng Y,Ding Y,Fan J,Luo K,Zhu T

更新日期：2019-05-01 00:00:00

abstract：:In this study, the effects of medial collateral ligament (MCL) release and the limb correction strategies with pre-existing MCL laxity on tibiofemoral contact force distribution after high tibial osteotomy (HTO) were investigated. The medial and lateral contact forces of the knee were quantified during simulated stand...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Purevsuren T,Khuyagbaatar B,Kim K,Kim YH

更新日期：2019-02-01 00:00:00

abstract：:The purpose of this study was to identify one or more performance-based criteria that may be used to generate predictive optimal control simulations of submaximal pedaling. Two-legged pedaling simulations were generated based on minimizing muscle activation, muscle stress, metabolic energy, time derivative of muscle f...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Gidley AD,Marsh AP,Umberger BR

更新日期：2019-01-01 00:00:00

abstract：:Polyurethane (PU) foam is a material often used in biomechanical experiments and demands for the definition of crushable foam plasticity (CFP) in numerical simulations of the primary stability and deformation of implants, to describe the crushing behaviour appropriately. Material data of PU foams with five different d...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Schulze C,Vogel D,Sander M,Bader R

更新日期：2019-01-01 00:00:00

abstract：:The design of child restraints is guided in part by anthropometric data describing the distributions of body dimensions of children. However, three-dimensional body shape data have not been available for children younger than three years of age. This study presents body shape models for children weighing 9-23 kg in a ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Jones MLH,Ebert SM,Reed MP,Klinich KD

更新日期：2018-11-01 00:00:00

abstract：:In the present study, the free fall impact test in accordance with the EN1078 standard for certification of bicycle helmets is replicated using numerical simulations. The impact scenario is simulated using an experimentally validated, patient-specific head model equipped with and without a bicycle helmet. Head acceler...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Sandberg M,Tse KM,Tan LB,Lee HP

更新日期：2018-09-01 00:00:00

abstract：OBJECTIVES:The purpose of the present study was to evaluate the distribution and magnitude of stresses through the bone tissue surrounding Morse taper dental implants at different positioning relative to the bone crest. MATERIALS AND METHODS:A mandibular bone model was obtained from a computed tomography scan. A three...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Macedo JP,Pereira J,Faria J,Souza JCM,Alves JL,López-López J,Henriques B

更新日期：2018-09-01 00:00:00

abstract：:The aim of this study was to evaluate the stress distributions and deformations of the temporomandibular joint (TMJ) during different periods before and after sagittal split ramus osteotomy (SSRO). A three-dimensional finite element model of the mandible and TMJ was established, based on the preoperative CT of a patie...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Liu Z,Shu J,Zhang Y,Fan Y

更新日期：2018-08-01 00:00:00

abstract：:The multispiked connecting scaffold (MSC-scaffold) prototype is an essential innovation in the fixation of components of resurfacing arthroplasty (RA) endoprostheses, providing their entirely non-cemented and bone-tissue-preserving fixation in peri-articular bone. An FE study is proposed to evaluate the influence of g...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Uklejewski R,Winiecki M,Patalas A,Rogala P

更新日期：2018-07-01 00:00:00

abstract：:The aim of the present study is to examine the impact absorption mechanism of the foot for different strike patterns (rearfoot, midfoot and forefoot) using a continuum mechanics approach. A three-dimensional finite element model of the foot was employed to estimate the stress distribution in the foot at the moment of ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Morales-Orcajo E,Becerro de Bengoa Vallejo R,Losa Iglesias M,Bayod J,Barbosa de Las Casas E

更新日期：2018-05-01 00:00:00

abstract：:To analyze the biomechanical effect of syndesmotic screw through three and four cortices, a total of 12 finite element models simulating healthy ankles, tibiofibular syndesmosis injured ankles, and post-operative ankles by screw fixations through three or four cortices were built. A set of biomechanical data were obta...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Li H,Chen Y,Qiang M,Zhang K,Jiang Y,Zhang Y,Jia X

更新日期：2018-04-01 00:00:00

abstract：:Being seated for long periods, while part of many leisure or occupational activities, can lead to discomfort, pain and sometimes health issues. The impact of prolonged sitting on the body has been widely studied in the literature, with a large number of human-body finite element models developed to simulate sitting an...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Savonnet L,Wang X,Duprey S

更新日期：2018-03-01 00:00:00