Linking mutated primary structure of adrenoleukodystrophy protein with X-linked adrenoleukodystrophy.

abstract：:An effective way to avoid invading or injuring the subjects is to use the musculoskeletal model when studying the dynamic properties of muscles in vivo. So, we put forward a joint coordinate system-based method, which mainly focuses on the coordinate's transformation of corresponding muscle attachment points, respecti...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Tang G,Zhang XA,Zhang LL,Wang HS,Nie WZ,Wang CT

更新日期：2011-07-01 00:00:00

abstract：:There are few previous studies on the elastic properties of ureter and most have been limited to essentially one-dimensional deformation measurements. The object of this study was, therefore, to identify regional variations in the multiaxial behaviour of rabbit ureter, subjected to in vitro inflation/extension testing...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Sokolis DP

更新日期：2014-11-01 00:00:00

abstract：:The change in maximum total point motion (ΔMTPM) is used to predict long-term risk of tibial baseplate loosening, however, effects of registration error on ΔMTPM have not been quantified for marker-based and model-based radiostereometric analysis (RSA). Registration errors for marker-based and model-based RSA were app...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Niesen AE,Hull ML

更新日期：2021-01-05 00:00:00

abstract：:A two-dimensional, biomechanical computer model was developed, using the software package Working Model(TM), to simulate the postural control of seated individuals. Both able-bodied and spinal cord-injured subjects were represented. The model incorporated active control of the upper body through full-state feedback. S...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Kamper D,Barin K,Parnianpour M,Hemami H,Weed H

更新日期：2000-01-01 00:00:00

abstract：:This article develops a two prion population model that simulates prion trafficking between an infected dendritic cell and a neuron. The situation when the two cells are connected by a tunnelling nanotube (TNT) is simulated. Two mechanisms of prion transport are considered: lateral diffusion in the TNT membrane and ac...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Kuznetsov IA,Kuznetsov AV

更新日期：2014-11-01 00:00:00

abstract：:The purpose of this study was to identify one or more performance-based criteria that may be used to generate predictive optimal control simulations of submaximal pedaling. Two-legged pedaling simulations were generated based on minimizing muscle activation, muscle stress, metabolic energy, time derivative of muscle f...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Gidley AD,Marsh AP,Umberger BR

更新日期：2019-01-01 00:00:00

abstract：:The aim of this study was to investigate and present a new mapping method to describe muscle pain sensitivity based on the assessment of pressure pain threshold (PPT) over the trapezius muscle. PPT data were recorded from 36 points in 20 healthy males using a standardised grid. Points were clustered using the K-means ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Binderup AT,Arendt-Nielsen L,Madeleine P

更新日期：2010-12-01 00:00:00

abstract：:The rate of bone loss is subject to considerable variation between individuals. With the 'mechanostat' model of Frost, genetic variations in bone mechanoresponsiveness are modelled by different mechanostat 'setpoints'--which may also change with age or disease. In this paper, the following setpoints are used: epsilonm...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Mulvihill BM,Prendergast PJ

更新日期：2008-10-01 00:00:00

abstract：:Most recent finite element models that represent muscles are generic or subject-specific models that use complex, constitutive laws. Identification of the parameters of such complex, constitutive laws could be an important limit for subject-specific approaches. The aim of this study was to assess the possibility of mo...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Gras LL,Mitton D,Crevier-Denoix N,Laporte S

更新日期：2012-01-01 00:00:00

abstract：:Ageing influences gait patterns which in turn can affect the balance control of human locomotion. Entropy-based regularity and complexity measures have been highly effective in analysing a broad range of physiological signals. Minimum toe clearance (MTC) is an event during the swing phase of the gait cycle and is high...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Karmakar C,Khandoker A,Begg R,Palaniswami M

更新日期：2013-01-01 00:00:00

abstract：:In order to improve the reliability of children's models, the aim of this study was to determine the subject-specific masses and 3D locations of the centres of mass (CoM) of body segments using biplanar X-rays. Previous methods, validated on upper leg segments, were applied to the whole body. Six children and six adul...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Sandoz B,Laporte S,Skalli W,Mitton D

更新日期：2010-12-01 00:00:00

abstract：:In electromagnetic dosimetry, anatomical human models are commonly obtained by segmentation of magnetic resonance imaging or computed tomography scans. In this paper, a human head model extracted from thermal infrared images is examined in terms of its applicability to specific absorption rate (SAR) calculations. Sinc...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Gasmelseed A

更新日期：2011-07-01 00:00:00

abstract：:An appropriate method of application of the hip-joint force and stress analysis of the pelvic bone, in particular the acetabulum, is necessary to investigate the changes in load transfer due to implantation and to calculate the reference stimulus for bone remodelling simulations. The purpose of the study is to develop...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ghosh R,Pal B,Ghosh D,Gupta S

更新日期：2015-01-01 00:00:00

abstract：:This study deals with recent researches undertaken by the authors in the field of hydrodynamics of human swimming. The aim of this numerical study was to investigate the flow around the entire swimmer's body. The results presented in this article focus on the combination of a 3D computational fluid dynamics code and t...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Popa CV,Arfaoui A,Fohanno S,Taïar R,Polidori G

更新日期：2014-01-01 00:00:00

abstract：:The biomechanical effect of tensioning the lumbar fasciae (LF) on the stability of the spine during sagittal plane motion was analysed using a validated finite element model of the normal lumbosacral spine (L4-S1). To apply the tension in the LF along the direction of the fibres, a local coordinate was allocated using...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Choi HW,Kim YE

更新日期：2017-10-01 00:00:00

abstract：:The normalcy index (NI) has been implemented by several studies as a simple index for quantitatively analyzing diffident gait abnormalities, such as children with cerebral palsy and idiopathic toe-walkers. However, whether the NI can be used in anterior cruciate ligament (ACL) deficiency with different types of menisc...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Liu X,Huang H,Ren S,Rong Q,Ao Y

更新日期：2020-11-01 00:00:00

abstract：:Blunt and rotational head impacts due to vehicular collisions, falls and contact sports cause relative motion between the brain and skull. This increases the normal and shear stresses in the (skull/brain) interface region consisting of cerebrospinal fluid (CSF) and subarachnoid space (SAS) trabeculae. The relative mot...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Zoghi-Moghadam M,Sadegh AM

更新日期：2009-02-01 00:00:00

abstract：:Three non-Newtonian blood viscosity models plus the Newtonian one are analysed for a patient-specific thoracic aorta anatomical model under steady-state flow conditions via wall shear stress (WSS) distribution, non-Newtonian importance factors, blood viscosity and shear rate. All blood viscosity models yield a consist...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Caballero AD,Laín S

更新日期：2015-08-01 00:00:00

abstract：:Numerical modelling of the cardiovascular system is becoming an important tool for assessing the influence of heart disease and treatment therapies. In the current study, we present an approach for modelling the interaction between the heart and the circulatory system. This was accomplished by creating animal-specific...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wenk JF,Ge L,Zhang Z,Soleimani M,Potter DD,Wallace AW,Tseng E,Ratcliffe MB,Guccione JM

更新日期：2013-01-01 00:00:00

abstract：:The aim of this study was to present a new training algorithm using artificial neural networks called multi-objective least absolute shrinkage and selection operator (MOBJ-LASSO) applied to the classification of dynamic gait patterns. The movement pattern is identified by 20 characteristics from the three components o...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Andrade A,Costa M,Paolucci L,Braga A,Pires F,Ugrinowitsch H,Menzel HJ

更新日期：2015-01-01 00:00:00

abstract：:The labrum contributes to passive glenohumeral joint stability. Cadaveric studies have demonstrated that this has position and load dependency, which has not been quantified under physiological loads. This study aims to validate subject-specific finite element (FE) models against in vitro measurements of joint stabili...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Klemt C,Nolte D,Grigoriadis G,Di Federico E,Reilly P,Bull AMJ

更新日期：2017-11-01 00:00:00

abstract：:Understanding of cancellous bone permeability is lacking despite its importance in designing tissue engineering scaffolds for bone regeneration and orthopaedic surgery that relies on infiltration of bone cement into porous cancellous bone. We employed micro-computational fluid dynamics to investigate permeability for ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Teo JC,Teoh SH

更新日期：2012-01-01 00:00:00

abstract：:Biomechanical imaging techniques have been developed for soft tissue characterisation and detection of breast tumours. Harmonic motion imaging (HMI) uses a focused ultrasound technology to generate a harmonic radiation force in a localised region inside a soft tissue. The resulting dynamic response is used to map the ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Zhao X,Pelegri AA

更新日期：2014-01-01 00:00:00

abstract：:Musculoskeletal research questions regarding the prevention or rehabilitation of the hand can be addressed using inverse dynamics simulations when experiments are not possible. To date, no complete human hand model implemented in a holistic human body model has been fully developed. The aim of this work was to develop...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Engelhardt L,Melzner M,Havelkova L,Fiala P,Christen P,Dendorfer S,Simon U

更新日期：2020-12-10 00:00:00

abstract：:Electrocardiogram (ECG) signals are difficult to interpret, and clinicians must undertake a long training process to learn to diagnose diabetes from subtle abnormalities in these signals. To facilitate these diagnoses, we have developed a technique based on the heart rate variability signal obtained from ECG signals. ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Acharya UR,Faust O,Sree SV,Ghista DN,Dua S,Joseph P,Ahamed VI,Janarthanan N,Tamura T

更新日期：2013-01-01 00:00:00

abstract：:Musculoskeletal finite element analysis (FEA) has been essential to research in orthopaedic biomechanics. The generation of a volumetric mesh is often the most challenging step in a FEA. Hexahedral meshing tools that are based on a multi-block approach rely on the manual placement of building blocks for their mesh gen...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ramme AJ,Shivanna KH,Magnotta VA,Grosland NM

更新日期：2011-10-01 00:00:00

abstract：:Abnormal haemodynamic parameters are associated with atheroma plaque progression and instability in coronary arteries. Flow recirculation, shear stress and pressure gradient are understood to be important pathogenic mediators in coronary disease. The effect of freedom of coronary artery movement on these parameters is...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Javadzadegan A,Yong AS,Chang M,Ng MK,Behnia M,Kritharides L

更新日期：2017-02-01 00:00:00

abstract：:This article is focused on the role of anisotropic elasticity in the simulation of the load distribution in a human mandible, due to a lateral bite on the leftmost premolar. Based on experimental evidence, orthotropy of the elastic properties of the bone tissue has been adopted. The trajectories of anisotropic elastic...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Kober C,Erdmann B,Hellmich C,Sader R,Zeilhofer HF

更新日期：2006-04-01 00:00:00

abstract：:In this study we aim at investigating the applicability of underwater 3D motion capture based on submerged video cameras in terms of 3D accuracy analysis and trajectory reconstruction. Static points with classical direct linear transform (DLT) solution, a moving wand with bundle adjustment and a moving 2D plate with Z...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Silvatti AP,Cerveri P,Telles T,Dias FA,Baroni G,Barros RM

更新日期：2013-01-01 00:00:00

abstract：:Dialyser manufacturers only provide limited information about mass removal under well-defined flow and solute conditions in commercially available dialysers for hemodialysis. This computational study aimed at assessing the solute transport efficiency in a dialyser for different geometries (fiber lengths and diameters)...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Eloot S,Vierendeels J,Verdonck P

更新日期：2006-12-01 00:00:00