Subject-specific body segment parameters' estimation using biplanar X-rays: a feasibility study.

abstract：:Soft tissue modelling has gained a great deal of importance, for a large part due to its application in surgical training simulators for minimally invasive surgery (MIS). This article provides a structured overview of different continuum-mechanical models that have been developed over the years. It aims at facilitatin...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Famaey N,Vander Sloten J

更新日期：2008-08-01 00:00:00

abstract：:Pedestrians are the most vulnerable road user and represent about 23% of the road traffic deaths in the world. A finite element (FE) model corresponding to a 5th percentile female pedestrian (F05-PS) was developed by morphing the Global Human Body Models Consortium (GHBMC) 50th percentile male pedestrian (M50-PS) mode...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Pak W,Meng Y,Schap J,Koya B,Gayzik FS,Untaroiu CD

更新日期：2020-12-01 00:00:00

abstract：:Microarchitectural finite element models have become a key tool in the analysis of trabecular bone. Robust, accurate, and validated constitutive models would enhance confidence in predictive applications of these models and in their usefulness as accurate assays of tissue properties. Human trabecular bone specimens fr...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Baumann AP,Shi X,Roeder RK,Niebur GL

更新日期：2016-01-01 00:00:00

abstract：:In order to investigate injury mechanisms, and to provide directions for road safety system improvements, the HUMOS project has lead to the development of a 3D finite element model of the human body in driving position. The model geometry was obtained from a 50th percentile adult male. It includes the description of a...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Behr M,Arnoux PJ,Serre T,Bidal S,Kang HS,Thollon L,Cavallero C,Kayvantash K,Brunet C

更新日期：2003-08-01 00:00:00

abstract：:This work presents a biomechanical study of myringosclerosis (MS), an abnormal condition of the ear that produces calcification of the lamina propria of the eardrum. The study researched the transfer of sound to the stapes depending on the localization, dimension and calcification degree of the MS plaques. Results wer...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Berdich K,Gentil F,Parente M,Garbe C,Santos C,Paço J,Natal Jorge RM,Martins P,Faur N

更新日期：2016-02-01 00:00:00

abstract：:The primary stem stability is an essential factor for success of cementless hip stems. A correct choice of the stem geometry can improve the stem stability and, consequently, increase the life time of a hip implant. In this work, it is proposed a computational model for shape optimization of cementless hip stems. The ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Fernandes PR,Folgado J,Ruben RB

更新日期：2004-02-01 00:00:00

abstract：:An efficient wavelet-based feature selection (FS) method is proposed in this paper for subject recognition using ground reaction force measurements. Our approach relies on a local fuzzy evaluation measure with respect to patterns that reveal the adequacy of data coverage for each feature. Furthermore, FS is driven by ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Moustakidis SP,Theocharis JB,Giakas G

更新日期：2012-01-01 00:00:00

abstract：:An approach was developed to evaluate the load transfer mechanism in the temporomandibular joint (TMJ) area before, during and after mandibular ramus elongation by distraction osteogenesis (DO). In a concerted approach using computer tomography, magnetic resonance imaging (MRI), and finite element analysis, three-dime...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Cattaneo PM,Kofod T,Dalstra M,Melsen B

更新日期：2005-06-01 00:00:00

abstract：:The objective of this investigation was to develop probabilistic finite element (FE) models of the anterior longitudinal ligament (ALL) and posterior longitudinal ligament (PLL) of the cervical spine that incorporate the natural variability of biological specimens. In addition to the model development, a rigorous vali...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Francis WL,Eliason TD,Thacker BH,Paskoff GR,Shender BS,Nicolella DP

更新日期：2014-01-01 00:00:00

abstract：:An appropriate method of application of the hip-joint force and stress analysis of the pelvic bone, in particular the acetabulum, is necessary to investigate the changes in load transfer due to implantation and to calculate the reference stimulus for bone remodelling simulations. The purpose of the study is to develop...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ghosh R,Pal B,Ghosh D,Gupta S

更新日期：2015-01-01 00:00:00

abstract：:The aim of this study was to demonstrate that external loading due to daily activities, including mastication, speech and involuntary open-close cycles of the jaw contributes to the internal architecture of the mandible. A bone remodelling algorithm that regulates the bone density as a function of stress and loading c...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Chou HY,Satpute D,Müftü A,Mukundan S,Müftü S

更新日期：2015-01-01 00:00:00

abstract：:The extracellular matrix (ECM) provides structural and biochemical support to cells and tissues, which is a critical factor for modulating cell dynamic behavior and intercellular communication. In order to further understand the mechanisms of the interactive relationship between cell and the ECM, we developed a three-...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dong S,Huang Z,Tang L,Zhang X,Zhang Y,Jiang Y

更新日期：2017-07-01 00:00:00

abstract：:Local oxygen lack in arterial walls (hypoxia) plays a very important role in the initiation, progression and development of intimal hyperplasia (IH) and thrombosis. Aiming to find out whether a helical-type artery bypass graft (ABG) is hypoxia beneficial, a numerical study was carried out to compare oxygen transport b...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Zheng T,Wen J,Jiang W,Deng X,Fan Y

更新日期：2014-04-01 00:00:00

abstract：:Mechanical loading of soft tissues covering bony prominences can cause skeletal muscle damage, ultimately resulting in a severe pressure ulcer termed deep tissue injury (DTI). Deformation plays an important role in the aetiology of DTI. Therefore, it is essential to minimise internal muscle deformations in subjects at...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Loerakker S,Solis LR,Bader DL,Baaijens FP,Mushahwar VK,Oomens CW

更新日期：2013-01-01 00:00:00

abstract：:There are few previous studies on the elastic properties of ureter and most have been limited to essentially one-dimensional deformation measurements. The object of this study was, therefore, to identify regional variations in the multiaxial behaviour of rabbit ureter, subjected to in vitro inflation/extension testing...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Sokolis DP

更新日期：2014-11-01 00:00:00

abstract：:Big data and its approaches are generally helpful for healthcare and biomedical sectors for predicting the disease. For trivial symptoms, the difficulty is to meet the doctors at any time in the hospital. Thus, big data provides essential data regarding the diseases on the basis of the patient's symptoms. For several ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ampavathi A,Saradhi TV

更新日期：2021-01-11 00:00:00

abstract：:When treating thoracolumbar burst fractures (BF), short-segment posterior fixation (SSPF) represents a less invasive alternative to the traditional long-segment posterior fixation (LSPF) approach. However, hardware failure and loss of sagittal alignment have been reported in patients treated with SSPF. Including pedic...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Elmasry S,Asfour S,Travascio F

更新日期：2017-10-01 00:00:00

abstract：:The objective of this study was to compare the performance of six validated brain finite element (FE) models to localized brain motion validation data in five experimental configurations. Model performance was measured using the objective metric CORA (CORrelation and Analysis), where higher ratings represent better co...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Miller LE,Urban JE,Stitzel JD

更新日期：2017-09-01 00:00:00

abstract：:Monitoring of skin blood flow oscillations related with mechanical activity of vessels is a very useful modality during diagnosis of peripheral hemodynamic disorders. In this study, we developed a new model and technique for real-time conversion of skin temperature into skin blood flow oscillations, and vice versa. Th...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Sagaidachnyi A,Fomin A,Usanov D,Skripal A

更新日期：2019-09-01 00:00:00

abstract：:Anterior percutaneous endoscopic cervical discectomy (APECD) is a common treatment for cervical spondylotic radiculopathy (CSR). In this study, the effects of various channel diameters and approach angles on cervical vertebrae on postoperative outcomes in APECD surgery were explored. A finite element model of intact c...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Sun MS,Yuchi CX,Cai XY,Du CF,Mo ZJ

更新日期：2020-12-01 00:00:00

abstract：:This paper simulates an axon with a region of reversed microtubule (MT) polarity, and investigates how the degree of polar mismatching in this region affects the formation of organelle traps in the axon. The model is based on modified Smith-Simmons equations governing molecular-motor-assisted transport in neurons. It ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Kuznetsov AV

更新日期：2010-12-01 00:00:00

abstract：:It is still unclear how a vertebral fracture should be stabilised and strengthened without endangering the remaining intact bone of the augmented vertebra or the adjacent vertebrae. Numerical modelling may provide insight. To date, however, few finite element (FE) spine models have been developed which are both multi-...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dabirrahmani D,Becker S,Hogg M,Appleyard R,Baroud G,Gillies M

更新日期：2012-01-01 00:00:00

abstract：:Transcatheter aortic valve replacement (TAVR) strongly depends on the calcification patterns, which may lead to a malapposition of the stented valve and complication onsets in terms of structure kinematics and paravalvular leakage (PVL). From one anatomical-resembling model of the aortic root, six configurations with ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Luraghi G,Matas JFR,Beretta M,Chiozzi N,Iannetti L,Migliavacca F

更新日期：2020-09-14 00:00:00

abstract：:The drug-eluting stent (DES) has become the gold standard worldwide for the treatment of cardiovascular diseases. In recent years, an innovative variation of the DES with micro-sized drug reservoirs has been introduced. It allows programmable drug delivery with both spatial and temporal control and has several potenti...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Hsiao HM,Chiu YH

更新日期：2013-01-01 00:00:00

abstract：:The biomechanical effect of tensioning the lumbar fasciae (LF) on the stability of the spine during sagittal plane motion was analysed using a validated finite element model of the normal lumbosacral spine (L4-S1). To apply the tension in the LF along the direction of the fibres, a local coordinate was allocated using...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Choi HW,Kim YE

更新日期：2017-10-01 00:00:00

abstract：:A three-dimensional finite element model is developed for the simulation of the sound transmission through the human auditory periphery consisting of the external ear canal, middle ear and cochlea. The cochlea is modelled as a straight duct divided into two fluid-filled scalae by the basilar membrane (BM) having an or...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wang X,Wang L,Zhou J,Hu Y

更新日期：2014-08-01 00:00:00

abstract：:The goal and clinical relevance of this work was the development of closed formulas that are correct and simple enough for a fast decision making by the orthodontist in the daily praxis. This paper performs a parametric three-dimensional finite element linear analysis on a maxillary central incisor with a root of para...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Provatidis CG

更新日期：2002-04-01 00:00:00

abstract：:A recently presented solution method for the bidomain model (Johnston et al. 2006), which involves the application of direct current for studying electrical potential in a slab of cardiac tissue, is extended here to allow the use of an applied alternating current. The advantage of using AC current, in a four-electrode...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Johnston BM,Johnston PR,Kilpatrick D

更新日期：2008-06-01 00:00:00

abstract：:This paper analyses the mechanical behaviour of a new reinforced anatomical post-systems (RAPS) for endodontic restoration. The composite restorative material (CRM) completely fills the root canal (as do the commonly used cast metal posts) and multiple prefabricated composite posts (PCPs) are employed as reinforcement...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Maceri F,Martignoni M,Vairo G

更新日期：2009-02-01 00:00:00

abstract：:In this paper, a qualitative comparison between two types of dental implants with respect to their behaviour under immediate loading is presented. This analysis has been carried out using the finite element method. Since micromotions (and not the load) are responsible of the appearance of a fibrous interface avoiding ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Pérez del Palomar A,Arruga A,Cegoñino J,Doblaré M

更新日期：2005-02-01 00:00:00