Real-time technique for conversion of skin temperature into skin blood flow: human skin as a low-pass filter for thermal waves.

abstract：:A three-dimensional finite element model is developed for the simulation of the sound transmission through the human auditory periphery consisting of the external ear canal, middle ear and cochlea. The cochlea is modelled as a straight duct divided into two fluid-filled scalae by the basilar membrane (BM) having an or...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wang X,Wang L,Zhou J,Hu Y

更新日期：2014-08-01 00:00:00

abstract：OBJECTIVE:Develop a finite element (FE) model of a skull to perform biomechanical studies of maxillary expansion using bone anchors (BA). MATERIALS AND METHODS:A skull model was developed and assigned material properties based on Hounsfield unit (HU) values of cone-beam computerized tomography (CBCT) images. A 3 mm di...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Fang Y,Lagravère MO,Carey JP,Major PW,Toogood RR

更新日期：2007-04-01 00:00:00

abstract：:It is still unclear how a vertebral fracture should be stabilised and strengthened without endangering the remaining intact bone of the augmented vertebra or the adjacent vertebrae. Numerical modelling may provide insight. To date, however, few finite element (FE) spine models have been developed which are both multi-...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dabirrahmani D,Becker S,Hogg M,Appleyard R,Baroud G,Gillies M

更新日期：2012-01-01 00:00:00

abstract：:A two-dimensional time-dependent computational fluid dynamics model of the Circle of Willis has been developed. To simulate, not only the peripheral resistance of the cerebrovascular tree but also its auto-regulation function, a new "active" boundary condition has been defined and developed using control theory to pro...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ferrandez A,David T,Brown MD

更新日期：2002-02-01 00:00:00

abstract：:The mechanical properties of soft biological tissues in general and early stage engineered tissues in particular limit the feasibility of conventional tensile tests for their mechanical characterisation. Furthermore, the most important mode in development of deep tissue injury (DTI) is compression. Therefore, an inver...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Cox MA,Gawlitta D,Driessen NJ,Oomens CW,Baaijens FP

更新日期：2008-10-01 00:00:00

abstract：:Big data and its approaches are generally helpful for healthcare and biomedical sectors for predicting the disease. For trivial symptoms, the difficulty is to meet the doctors at any time in the hospital. Thus, big data provides essential data regarding the diseases on the basis of the patient's symptoms. For several ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ampavathi A,Saradhi TV

更新日期：2021-01-11 00:00:00

abstract：:The aim of this paper is to use a poroviscohyperelastic (PVHE) model, which is developed based on the porohyperelastic (PHE) model to explore the mechanical deformation properties of single chondrocytes. Both creep and relaxation responses are investigated by using finite element analysis models of micropipette aspira...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Nguyen TD,Oloyede A,Gu Y

更新日期：2016-01-01 00:00:00

abstract：:The study of the topological organisation of myocardial cells is a basic requirement for understanding the mechanical design of the normal and pathological heart. Anatomical observations show that cardiac muscle tissue has a highly specialized architecture. We have made new quantitative measurements of fibre orientati...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ohayon J,Usson Y,Jouk PS,Cai H

更新日期：1999-01-01 00:00:00

abstract：:Blunt and rotational head impacts due to vehicular collisions, falls and contact sports cause relative motion between the brain and skull. This increases the normal and shear stresses in the (skull/brain) interface region consisting of cerebrospinal fluid (CSF) and subarachnoid space (SAS) trabeculae. The relative mot...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Zoghi-Moghadam M,Sadegh AM

更新日期：2009-02-01 00:00:00

abstract：:The extracellular matrix (ECM) provides structural and biochemical support to cells and tissues, which is a critical factor for modulating cell dynamic behavior and intercellular communication. In order to further understand the mechanisms of the interactive relationship between cell and the ECM, we developed a three-...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dong S,Huang Z,Tang L,Zhang X,Zhang Y,Jiang Y

更新日期：2017-07-01 00:00:00

abstract：:This paper analyses the mechanical behaviour of a new reinforced anatomical post-systems (RAPS) for endodontic restoration. The composite restorative material (CRM) completely fills the root canal (as do the commonly used cast metal posts) and multiple prefabricated composite posts (PCPs) are employed as reinforcement...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Maceri F,Martignoni M,Vairo G

更新日期：2009-02-01 00:00:00

abstract：:Microarchitectural finite element models have become a key tool in the analysis of trabecular bone. Robust, accurate, and validated constitutive models would enhance confidence in predictive applications of these models and in their usefulness as accurate assays of tissue properties. Human trabecular bone specimens fr...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Baumann AP,Shi X,Roeder RK,Niebur GL

更新日期：2016-01-01 00:00:00

abstract：:The display of three-dimensional angiograms can benefit from the knowledge of quantitative shape features such as tangent and curvature of the centerline of vessels. These can be obtained from a curve-like skeleton representation. If connectivity and topology are preserved, and if geometrical constraints such as smoot...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Yi D,Hayward V

更新日期：2002-10-01 00:00:00

abstract：:The clinical importance of measuring local pulse wave velocity (PWV), has encouraged researchers to develop several local methods to estimate it. In this work, we proposed a new method, the sum-of-squares method [Formula: see text], that allows the estimations of PWV by using simultaneous measurements of blood pressur...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Abdessalem KB,Flaud P,Zobaidi S

更新日期：2018-01-01 00:00:00

abstract：:It is challenging to measure the finger's kinematics of underlying bones in vivo. This paper presents a new method of finger kinematics measurement, using a geometric finger model and several markers deliberately stuck on skin surface. Using a multiple-view camera system, the optimal motion parameters of finger model ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Chang CW,Kuo LC,Jou IM,Su FC,Sun YN

更新日期：2013-01-01 00:00:00

abstract：:The article presents advanced computer simulations aimed at the accurate modelling of human tibio-femoral joints (TFJs) in terms of anatomy, physiological loading and constitutive behaviour of the tissues. The main objective of this research is to demonstrate the implications that the implementation of different artic...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Mattei L,Campioni E,Accardi MA,Dini D

更新日期：2014-01-01 00:00:00

abstract：:The decompensated univentricular circulation is identified as one of the most challenging conditions and the application of the mechanical circulatory support (MCS) devices is proposed as therapeutic option for Fontan failure. Modelling methodologies are reported to identify the optimized types, extent and duration of...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Rubtsova E,Markov A,Selishchev S,Karimov JH,Telyshev D

更新日期：2021-01-11 00:00:00

abstract：:Preoperative planning, or intraoperative navigation of hip surgery, including joint-preserving procedures such as osteotomy or joint-replacing procedures such as total arthroplasty, needs to be performed with a high degree of accuracy to ensure a successful outcome. The ability to precisely localise the hip joint rota...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Kang MJ,Sadri H,Stern R,Magnenat-Thalmann N,Hoffmeyer P,Ji HS

更新日期：2011-01-01 00:00:00

abstract：:Computer models of the human face have the potential to be used as powerful tools in surgery simulation and animation development applications. While existing models accurately represent various anatomical features of the face, the representation of the skin and soft tissues is very simplified. A computer model of the...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Flynn C,Stavness I,Lloyd J,Fels S

更新日期：2015-01-01 00:00:00

abstract：:Osteoporosis (OP) is common with advancing age. Several studies have shown a strong correlation between OP and otosclerosis. However, no studies have investigated OP of the malleus, incus or stapes in the human middle ear, its effect on middle ear transfer function. Here, we investigate whether these three ossicles de...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Zhou L,Shen N,Feng M,Liu H,Duan M,Huang X

更新日期：2019-10-01 00:00:00

abstract：:Both inter-lamellar and intra-lamellar failures of the annulus have been described as potential modes of disc herniation. Attempts to characterize initial lamellar failure of the annulus have involved tensile testing of small tissue samples. The purpose of this study was to evaluate a method of measuring local surface...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Karakolis T,Callaghan JP

更新日期：2015-01-01 00:00:00

abstract：:The present paper describes a geometrically and physically nonlinear continuum model to study the mechanical behaviour of passive and active skeletal muscle. The contraction is described with a Huxley type model. A Distributed Moments approach is used to convert the Huxley partial differential equation in a set of ord...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Gielen AW,Oomens CW,Bovendeerd PH,Arts T,Janssen JD

更新日期：2000-01-01 00:00:00

abstract：:In this review, we provide an overview of the simulation techniques employed for modelling the flow of red blood cells (RBCs) in blood plasma. The scope of this review omits the fluid modelling aspect while focusing on other key components in the RBC-plasma model such as (1) describing the RBC deformation with shell-b...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ju M,Ye SS,Namgung B,Cho S,Low HT,Leo HL,Kim S

更新日期：2015-01-01 00:00:00

abstract：:The goal and clinical relevance of this work was the development of closed formulas that are correct and simple enough for a fast decision making by the orthodontist in the daily praxis. This paper performs a parametric three-dimensional finite element linear analysis on a maxillary central incisor with a root of para...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Provatidis CG

更新日期：2002-04-01 00:00:00

abstract：:The rate of bone loss is subject to considerable variation between individuals. With the 'mechanostat' model of Frost, genetic variations in bone mechanoresponsiveness are modelled by different mechanostat 'setpoints'--which may also change with age or disease. In this paper, the following setpoints are used: epsilonm...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Mulvihill BM,Prendergast PJ

更新日期：2008-10-01 00:00:00

abstract：:This study is aimed at setting a method of experimental parameter estimation for large-deforming nonlinear viscoelastic continuous fibre-reinforced composite material model. Specifically, arterial tissue was investigated during experimental research and parameter estimation studies, due to medical, scientific and soci...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Sunbuloglu E,Bozdag E,Toprak T,Islak C

更新日期：2013-01-01 00:00:00

abstract：:A numerical pressure loss model previously used for adult human airways has been modified to simulate the inhalation pressure distribution in a healthy 9-month-old infant lung morphology model. Pressure distributions are calculated for air as well as helium and xenon mixtures with oxygen to investigate the effects of ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Gouinaud L,Katz I,Martin A,Hazebroucq J,Texereau J,Caillibotte G

更新日期：2015-01-01 00:00:00

abstract：:Work-related musculoskeletal disorders (WMSDs) have become increasingly common among dentists and initiate a series of events that could result in a career ending. This study aims to construct a system for predicting and preventing WMSD among dentists. We used Bayesian network (BN) that describes the mutual relationsh...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Thanathornwong B,Suebnukarn S,Songpaisan Y,Ouivirach K

更新日期：2014-01-01 00:00:00

abstract：:A clear and rigorous definition of muscle moment-arms in the context of musculoskeletal systems modelling is presented, using classical mechanics and screw theory. The definition provides an alternative to the tendon excursion method, which can lead to incorrect moment-arms if used inappropriately due to its dependenc...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ingram D,Engelhardt C,Farron A,Terrier A,Müllhaupt P

更新日期：2015-01-01 00:00:00

abstract：:The biomechanical effect of tensioning the lumbar fasciae (LF) on the stability of the spine during sagittal plane motion was analysed using a validated finite element model of the normal lumbosacral spine (L4-S1). To apply the tension in the LF along the direction of the fibres, a local coordinate was allocated using...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Choi HW,Kim YE

更新日期：2017-10-01 00:00:00