Fibre Orientation in Human Fetal Heart and Ventricular Mechanics : A Small Perturbation Analysis.

abstract：:Convective transports in the vertebral end plate (VEP) play a significant role in the homeostasis of the spine. A few studies hypothesised that the hydraulic resistance or effective permeability of the VEP could be dependant upon fluid-flow direction. Results were influenced by species, region of interest within the e...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Swider P,Accadbled F,Laffosse JM,Sales de Gauzy J

更新日期：2012-01-01 00:00:00

abstract：:The extracellular matrix (ECM) provides structural and biochemical support to cells and tissues, which is a critical factor for modulating cell dynamic behavior and intercellular communication. In order to further understand the mechanisms of the interactive relationship between cell and the ECM, we developed a three-...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dong S,Huang Z,Tang L,Zhang X,Zhang Y,Jiang Y

更新日期：2017-07-01 00:00:00

abstract：:Marker-based motion capture presents the problem of gaps, which are traditionally processed using motion capture software, requiring intensive manual input. We propose and study an automated method of gap-filling that uses inverse kinematics (IK) to close the loop of an iterative process to minimize error, while nearl...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Camargo J,Ramanathan A,Csomay-Shanklin N,Young A

更新日期：2020-11-01 00:00:00

abstract：:Accident statistics show that more than 80% of car-to-pedestrian collisions (CPC) occur when pedestrians cross the road. It is very important to establish a finite element model with natural walking posture to study the kinematics and injury mechanism of pedestrians. In this study, a finite element model of six-year-o...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Li H,Li K,Huang Y,Lv W,Cui S,He L,Ruan JS,Wang C

更新日期：2020-09-02 00:00:00

abstract：:Factors related to micromovements at bone-implant interface have been studied because they are considered adverse to osseointegration. Simplifications are commonly observed in these FEA evaluations. The aim of this study was to clarify the influence of FEA parameters (boundary conditions and bone properties) on the st...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dos Santos MBF,Meloto GO,Bacchi A,Correr-Sobrinho L

更新日期：2017-06-01 00:00:00

abstract：:The aim of this study was to evaluate the stress distributions and deformations of the temporomandibular joint (TMJ) during different periods before and after sagittal split ramus osteotomy (SSRO). A three-dimensional finite element model of the mandible and TMJ was established, based on the preoperative CT of a patie...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Liu Z,Shu J,Zhang Y,Fan Y

更新日期：2018-08-01 00:00:00

abstract：:The display of three-dimensional angiograms can benefit from the knowledge of quantitative shape features such as tangent and curvature of the centerline of vessels. These can be obtained from a curve-like skeleton representation. If connectivity and topology are preserved, and if geometrical constraints such as smoot...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Yi D,Hayward V

更新日期：2002-10-01 00:00:00

abstract：:Pelvic disorders can be associated with changes in the biomechanical properties in the muscle, ligaments and/or connective tissue form fascia and ligaments. In this sense, the study of their mechanical behavior is important to understand the structure and function of these biological soft tissues. The aim of this stud...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Silva MET,Brandão S,Parente MPL,Mascarenhas T,Natal Jorge RM

更新日期：2017-06-01 00:00:00

abstract：:Musculoskeletal research questions regarding the prevention or rehabilitation of the hand can be addressed using inverse dynamics simulations when experiments are not possible. To date, no complete human hand model implemented in a holistic human body model has been fully developed. The aim of this work was to develop...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Engelhardt L,Melzner M,Havelkova L,Fiala P,Christen P,Dendorfer S,Simon U

更新日期：2020-12-10 00:00:00

abstract：:Numerical modelling of the cardiovascular system is becoming an important tool for assessing the influence of heart disease and treatment therapies. In the current study, we present an approach for modelling the interaction between the heart and the circulatory system. This was accomplished by creating animal-specific...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wenk JF,Ge L,Zhang Z,Soleimani M,Potter DD,Wallace AW,Tseng E,Ratcliffe MB,Guccione JM

更新日期：2013-01-01 00:00:00

abstract：:The multispiked connecting scaffold (MSC-scaffold) prototype is an essential innovation in the fixation of components of resurfacing arthroplasty (RA) endoprostheses, providing their entirely non-cemented and bone-tissue-preserving fixation in peri-articular bone. An FE study is proposed to evaluate the influence of g...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Uklejewski R,Winiecki M,Patalas A,Rogala P

更新日期：2018-07-01 00:00:00

abstract：:An appropriate method of application of the hip-joint force and stress analysis of the pelvic bone, in particular the acetabulum, is necessary to investigate the changes in load transfer due to implantation and to calculate the reference stimulus for bone remodelling simulations. The purpose of the study is to develop...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ghosh R,Pal B,Ghosh D,Gupta S

更新日期：2015-01-01 00:00:00

abstract：:In this article, we discuss an application of a fictitious domain method to the numerical simulation of the mechanical process induced by press-fitting cementless femoral implants in total hip replacement surgeries. Here, the primary goal is to demonstrate the feasibility of the method and its advantages over competin...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Kallivokas LF,Na SW,Ghattas O,Jaramaz B

更新日期：2012-01-01 00:00:00

abstract：:At present, computer assisted surgery systems help orthopaedic surgeons both plan and perform surgical procedures. To enable these systems to function, it is crucial to have at one's disposal 3D models of anatomical structures, surgical tools and prostheses (if required). This paper analyses and compares three methods...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Filippi S,Motyl B,Bandera C

更新日期：2009-02-01 00:00:00

abstract：:Dialyser manufacturers only provide limited information about mass removal under well-defined flow and solute conditions in commercially available dialysers for hemodialysis. This computational study aimed at assessing the solute transport efficiency in a dialyser for different geometries (fiber lengths and diameters)...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Eloot S,Vierendeels J,Verdonck P

更新日期：2006-12-01 00:00:00

abstract：:In pre-surgery decisions in hospital emergency cases, fast and reliable results of the solid and fluid mechanics problems are of great interest to clinicians. In the current investigation, an iterative process based on a pressure-type boundary condition is proposed in order to reduce the computational costs of blood f...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Afkari D,Gabaldón F

更新日期：2016-01-01 00:00:00

abstract：:This work is concerned with the lubrication analysis of artificial knee joints, which plays an increasing significant role in clinical performance and longevity of components. Time-dependent elastohydrodynamic lubrication analysis for normal total knee replacement is carried out under the cyclic variation in both load...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Su Y,Yang P,Fu Z,Jin Z,Wang C

更新日期：2011-06-01 00:00:00

abstract：:The aim of this study was to develop a generic musculoskeletal model of a healthy 10-year-old child and examine the effects of geometric scaling on the calculated values of lower-limb muscle forces during gait. Subject-specific musculoskeletal models of five healthy children were developed from in vivo MRI data, and t...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Hainisch R,Kranzl A,Lin YC,Pandy MG,Gfoehler M

更新日期：2020-09-17 00:00:00

abstract：:This study is devoted to the development of a non-linear anisotropic model for the human periodontal ligament (PDL). A thorough knowledge of the behaviour of the PDL is vital in understanding the mechanics of orthodontic tooth mobility, soft tissue response and proposed treatment plans. There is considerable evidence ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Zhurov AI,Limbert G,Aeschlimann DP,Middleton J

更新日期：2007-06-01 00:00:00

abstract：:Blunt and rotational head impacts due to vehicular collisions, falls and contact sports cause relative motion between the brain and skull. This increases the normal and shear stresses in the (skull/brain) interface region consisting of cerebrospinal fluid (CSF) and subarachnoid space (SAS) trabeculae. The relative mot...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Zoghi-Moghadam M,Sadegh AM

更新日期：2009-02-01 00:00:00

abstract：:An efficient wavelet-based feature selection (FS) method is proposed in this paper for subject recognition using ground reaction force measurements. Our approach relies on a local fuzzy evaluation measure with respect to patterns that reveal the adequacy of data coverage for each feature. Furthermore, FS is driven by ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Moustakidis SP,Theocharis JB,Giakas G

更新日期：2012-01-01 00:00:00

abstract：:The current study aimed to evaluate physical training effects. For this purpose, a classifier was implemented by taking into account biomechanical features selected from force-plate measurements and a neurofuzzy algorithm for data management and relevant decision-making. Measurements included two sets of sit-to-stand ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Vannozzi G,Pecoraro F,Caserotti P,Cappozzo A

更新日期：2008-02-01 00:00:00

abstract：:Haemodynamics is believed to play an important role in the initiation, growth and rupture of intracranial aneurysms. In this context, computational haemodynamics has been extensively used in an effort to establish correlations between flow variables and clinical outcome. It is common practice in the application of Dir...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Marzo A,Singh P,Reymond P,Stergiopulos N,Patel U,Hose R

更新日期：2009-08-01 00:00:00

abstract：:This study presents the ankle ligament strains and ankle joint moments during an accidental injury event diagnosed as a grade I anterior talofibular ligament (ATaFL) sprain. A male athlete accidentally sprained his ankle while performing a cutting motion in a laboratory setting. The kinematic data were input to a thre...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wei F,Fong DT,Chan KM,Haut RC

更新日期：2015-01-01 00:00:00

abstract：:The behavior of blood cells and vessel compliance significantly influence hemodynamic parameters, which are closely related to the development of aortic dissection. Here the two-phase non-Newtonian model and the fluid-structure interaction (FSI) method are coupled to simulate blood flow in a patient-specific dissected...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Qiao Y,Zeng Y,Ding Y,Fan J,Luo K,Zhu T

更新日期：2019-05-01 00:00:00

abstract：:This study is aimed at setting a method of experimental parameter estimation for large-deforming nonlinear viscoelastic continuous fibre-reinforced composite material model. Specifically, arterial tissue was investigated during experimental research and parameter estimation studies, due to medical, scientific and soci...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Sunbuloglu E,Bozdag E,Toprak T,Islak C

更新日期：2013-01-01 00:00:00

abstract：:Numerical predictions of blood flow patterns and hemodynamic stresses in Abdominal Aortic Aneurysms (AAAs) are performed in a two-aneurysm, axisymmetric, rigid wall model using the spectral element method. Homogeneous, Newtonian blood flow is simulated under steady conditions for the range of Reynolds numbers 10 < or ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Finol EA,Amon CH

更新日期：2002-08-01 00:00:00

abstract：:Abnormal haemodynamic parameters are associated with atheroma plaque progression and instability in coronary arteries. Flow recirculation, shear stress and pressure gradient are understood to be important pathogenic mediators in coronary disease. The effect of freedom of coronary artery movement on these parameters is...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Javadzadegan A,Yong AS,Chang M,Ng MK,Behnia M,Kritharides L

更新日期：2017-02-01 00:00:00

abstract：:Remodelling and adaptation of bone within the pelvis is believed to be influenced by the mechanical strains generated during locomotion. Variation in the cortical bone thickness observed in the prenatal ilium has been linked to the musculoskeletal loading associated with in utero movements; for example the development...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Watson PJ,Fagan MJ,Dobson CA

更新日期：2020-10-01 00:00:00

abstract：:The evaluation of muscle and joint forces in vivo is still a challenge. Musculo-Skeletal (musculo-skeletal) models are used to compute forces based on movement analysis. Most of them are built from a scaled-generic model based on cadaver measurements, which provides a low level of personalization, or from Magnetic Res...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dubois G,Rouch P,Bonneau D,Gennisson JL,Skalli W

更新日期：2016-11-01 00:00:00