Fluid-solid interaction in arteries incorporating the autoregulation concept in boundary conditions.

abstract：:The aim of this study was to present a new training algorithm using artificial neural networks called multi-objective least absolute shrinkage and selection operator (MOBJ-LASSO) applied to the classification of dynamic gait patterns. The movement pattern is identified by 20 characteristics from the three components o...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Andrade A,Costa M,Paolucci L,Braga A,Pires F,Ugrinowitsch H,Menzel HJ

更新日期：2015-01-01 00:00:00

abstract：:Pelvic disorders can be associated with changes in the biomechanical properties in the muscle, ligaments and/or connective tissue form fascia and ligaments. In this sense, the study of their mechanical behavior is important to understand the structure and function of these biological soft tissues. The aim of this stud...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Silva MET,Brandão S,Parente MPL,Mascarenhas T,Natal Jorge RM

更新日期：2017-06-01 00:00:00

abstract：:The 2D shape of the lumbar spine in the sagittal plane can be determined from lordosis angles measured between the corresponding end-plates of the vertebral bodies or by using an active shape model (ASM) of the vertebral body outline. The ASM was previously shown to be a more efficient and reliable method, but its acc...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ali AH,Cowan AB,Gregory JS,Aspden RM,Meakin JR

更新日期：2012-01-01 00:00:00

abstract：:This paper proposes a micromechanics algorithm utilising the finite element method (FEM) for the analysis of heterogeneous matter. The characterisation procedure takes the material properties of the constituents, axons and extracellular matrix (ECM) as input data. The material properties of both the axons and the matr...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Abolfathi N,Naik A,Sotudeh Chafi M,Karami G,Ziejewski M

更新日期：2009-06-01 00:00:00

abstract：:Retinal blood vessel detection and analysis play vital roles in early diagnosis and prevention of several diseases, such as hypertension, diabetes, arteriosclerosis, cardiovascular disease and stroke. This paper presents an automated algorithm for retinal blood vessel segmentation. The proposed algorithm takes advanta...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Saleh MD,Eswaran C

更新日期：2012-01-01 00:00:00

abstract：:Much attention has been devoted to how playground swing amplitudes are built up by swinger techniques, i.e. body actions. However, very little attention has been given to the requirements that such swinger techniques place on the swinger himself. The purpose of this study was to find out whether different swinger tech...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Linge SO

更新日期：2012-01-01 00:00:00

abstract：:This study evaluated the polymerization shrinkage stress of three tooth preparation designs for indirect ceramic overlay by finite element analysis: isthmus preparation (IST); without isthmus preparation (wIST); and non-retentive preparation (nRET). The models were created based in prepared dental typodonts and were d...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： de Andrade GS,Pinto ABA,Tribst JPM,Chun EP,Borges ALS,de Siqueira Ferreira Anzaloni Saavedra G

更新日期：2021-01-07 00:00:00

abstract：:Accident statistics show that more than 80% of car-to-pedestrian collisions (CPC) occur when pedestrians cross the road. It is very important to establish a finite element model with natural walking posture to study the kinematics and injury mechanism of pedestrians. In this study, a finite element model of six-year-o...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Li H,Li K,Huang Y,Lv W,Cui S,He L,Ruan JS,Wang C

更新日期：2020-09-02 00:00:00

abstract：:Haemodynamics is believed to play an important role in the initiation, growth and rupture of intracranial aneurysms. In this context, computational haemodynamics has been extensively used in an effort to establish correlations between flow variables and clinical outcome. It is common practice in the application of Dir...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Marzo A,Singh P,Reymond P,Stergiopulos N,Patel U,Hose R

更新日期：2009-08-01 00:00:00

abstract：:Big data and its approaches are generally helpful for healthcare and biomedical sectors for predicting the disease. For trivial symptoms, the difficulty is to meet the doctors at any time in the hospital. Thus, big data provides essential data regarding the diseases on the basis of the patient's symptoms. For several ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ampavathi A,Saradhi TV

更新日期：2021-01-11 00:00:00

abstract：:Remodelling and adaptation of bone within the pelvis is believed to be influenced by the mechanical strains generated during locomotion. Variation in the cortical bone thickness observed in the prenatal ilium has been linked to the musculoskeletal loading associated with in utero movements; for example the development...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Watson PJ,Fagan MJ,Dobson CA

更新日期：2020-10-01 00:00:00

abstract：:Unbalanced contact force on the tibial component has been considered a factor leading to loosening of the implant and increased wear of the bearing surface in total knee arthroplasty. Because it has been reported that good alignment cannot guarantee successful clinical outcomes, the soft tissue balance should be check...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Oh KJ,Park WM,Kim K,Kim YH

更新日期：2014-01-01 00:00:00

abstract：:The current study aimed to evaluate physical training effects. For this purpose, a classifier was implemented by taking into account biomechanical features selected from force-plate measurements and a neurofuzzy algorithm for data management and relevant decision-making. Measurements included two sets of sit-to-stand ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Vannozzi G,Pecoraro F,Caserotti P,Cappozzo A

更新日期：2008-02-01 00:00:00

abstract：:The design of child restraints is guided in part by anthropometric data describing the distributions of body dimensions of children. However, three-dimensional body shape data have not been available for children younger than three years of age. This study presents body shape models for children weighing 9-23 kg in a ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Jones MLH,Ebert SM,Reed MP,Klinich KD

更新日期：2018-11-01 00:00:00

abstract：:In this paper, a qualitative comparison between two types of dental implants with respect to their behaviour under immediate loading is presented. This analysis has been carried out using the finite element method. Since micromotions (and not the load) are responsible of the appearance of a fibrous interface avoiding ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Pérez del Palomar A,Arruga A,Cegoñino J,Doblaré M

更新日期：2005-02-01 00:00:00

abstract：:The combination of computational methods with 3D printing allows for the control of scaffolds microstructure. Lately, triply periodic minimal surfaces (TPMS) have been used to design porosity-controlled scaffolds for bone tissue engineering (TE). The goal of this work was to assess the mechanical properties of TPMS Gy...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Castro APG,Ruben RB,Gonçalves SB,Pinheiro J,Guedes JM,Fernandes PR

更新日期：2019-05-01 00:00:00

abstract：OBJECTIVE:Develop a finite element (FE) model of a skull to perform biomechanical studies of maxillary expansion using bone anchors (BA). MATERIALS AND METHODS:A skull model was developed and assigned material properties based on Hounsfield unit (HU) values of cone-beam computerized tomography (CBCT) images. A 3 mm di...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Fang Y,Lagravère MO,Carey JP,Major PW,Toogood RR

更新日期：2007-04-01 00:00:00

abstract：:The aim of this study was to develop a generic musculoskeletal model of a healthy 10-year-old child and examine the effects of geometric scaling on the calculated values of lower-limb muscle forces during gait. Subject-specific musculoskeletal models of five healthy children were developed from in vivo MRI data, and t...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Hainisch R,Kranzl A,Lin YC,Pandy MG,Gfoehler M

更新日期：2020-09-17 00:00:00

abstract：:In order to have research on the deformation characteristics and mechanical properties of human red blood cells (RBCs), finite element models of RBC optical tweezers stretching and atomic force microscope (AFM) indentation were established. Non-linear elasticity of cell membrane was determined by using the neo-Hookean...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wang Y,Sang J,Ao R,Ma Y,Fu B

更新日期：2020-11-01 00:00:00

abstract：:The labrum contributes to passive glenohumeral joint stability. Cadaveric studies have demonstrated that this has position and load dependency, which has not been quantified under physiological loads. This study aims to validate subject-specific finite element (FE) models against in vitro measurements of joint stabili...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Klemt C,Nolte D,Grigoriadis G,Di Federico E,Reilly P,Bull AMJ

更新日期：2017-11-01 00:00:00

abstract：:This study presents the ankle ligament strains and ankle joint moments during an accidental injury event diagnosed as a grade I anterior talofibular ligament (ATaFL) sprain. A male athlete accidentally sprained his ankle while performing a cutting motion in a laboratory setting. The kinematic data were input to a thre...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wei F,Fong DT,Chan KM,Haut RC

更新日期：2015-01-01 00:00:00

abstract：:The mechanical properties of soft biological tissues in general and early stage engineered tissues in particular limit the feasibility of conventional tensile tests for their mechanical characterisation. Furthermore, the most important mode in development of deep tissue injury (DTI) is compression. Therefore, an inver...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Cox MA,Gawlitta D,Driessen NJ,Oomens CW,Baaijens FP

更新日期：2008-10-01 00:00:00

abstract：:Design optimization for cementless hip prosthesis signifies one of the key topics of research to improve its performances. However, majority of the studies have not considered the presence of uncertainties while it has been shown that a deterministic optimization leads to an unreliable design. In this paper, a multi-o...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dammak K,El Hami A

更新日期：2020-09-01 00:00:00

abstract：:Complexity represents the adaptability of the biological system, therefore the assessment of complexity during tasks such as walking may be particularly useful when attempting to better understand the recovery processes after stroke. The purpose of this study was to determine whether the complexity of lower extremity ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dugan EL,Combs-Miller SA

更新日期：2019-05-01 00:00:00

abstract：:Monitoring of skin blood flow oscillations related with mechanical activity of vessels is a very useful modality during diagnosis of peripheral hemodynamic disorders. In this study, we developed a new model and technique for real-time conversion of skin temperature into skin blood flow oscillations, and vice versa. Th...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Sagaidachnyi A,Fomin A,Usanov D,Skripal A

更新日期：2019-09-01 00:00:00

abstract：:In almost all finite element (FE) studies in dentistry, virtual forces are applied directly to dentures. The purpose of this study was to develop a FE model with non-linear contact simulation using an antagonist as force transmitter and to compare this with a similar model that uses direct force transmission. Furtherm...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Rand A,Stiesch M,Eisenburger M,Greuling A

更新日期：2017-08-01 00:00:00

abstract：:The decompensated univentricular circulation is identified as one of the most challenging conditions and the application of the mechanical circulatory support (MCS) devices is proposed as therapeutic option for Fontan failure. Modelling methodologies are reported to identify the optimized types, extent and duration of...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Rubtsova E,Markov A,Selishchev S,Karimov JH,Telyshev D

更新日期：2021-01-11 00:00:00

abstract：:Therapeutic use of high-amplitude pressure waves, or shock wave therapy (SWT), is emerging as a popular method for treating musculoskeletal disorders. However, the mechanism(s) through which this technique promotes healing are unclear. Finite element models of a shock wave source and the foot were constructed to gain ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Alkhamaali ZK,Crocombe AD,Solan MC,Cirovic S

更新日期：2016-01-01 00:00:00

abstract：:In this work, we present a technique to semi-automatically quantify the epicardial fat in non-contrasted computed tomography (CT) images. The epicardial fat is very close to the pericardial fat, being separated only by the pericardium that appears in the image as a very thin line, which is hard to detect. Therefore, a...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Barbosa JG,Figueiredo B,Bettencourt N,Tavares JM

更新日期：2011-10-01 00:00:00

abstract：:An appropriate method of application of the hip-joint force and stress analysis of the pelvic bone, in particular the acetabulum, is necessary to investigate the changes in load transfer due to implantation and to calculate the reference stimulus for bone remodelling simulations. The purpose of the study is to develop...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ghosh R,Pal B,Ghosh D,Gupta S

更新日期：2015-01-01 00:00:00