Finite element modelling of radial shock wave therapy for chronic plantar fasciitis.

abstract：:A three-dimensional finite element model is developed for the simulation of the sound transmission through the human auditory periphery consisting of the external ear canal, middle ear and cochlea. The cochlea is modelled as a straight duct divided into two fluid-filled scalae by the basilar membrane (BM) having an or...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wang X,Wang L,Zhou J,Hu Y

更新日期：2014-08-01 00:00:00

abstract：:It is challenging to measure the finger's kinematics of underlying bones in vivo. This paper presents a new method of finger kinematics measurement, using a geometric finger model and several markers deliberately stuck on skin surface. Using a multiple-view camera system, the optimal motion parameters of finger model ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Chang CW,Kuo LC,Jou IM,Su FC,Sun YN

更新日期：2013-01-01 00:00:00

abstract：:There are no blood vessels in cartilage to transport nutrients and growth factors to chondrocytes dispersed throughout the cartilage matrix. Insulin-like growth factor-I (IGF-I) is a large molecule with an important role in cartilage growth and metabolism, however, it first must reach the chondrocytes to exert its eff...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Gardiner B,Smith D,Pivonka P,Grodzinsky A,Frank E,Zhang L

更新日期：2007-08-01 00:00:00

abstract：:Marker-based motion capture presents the problem of gaps, which are traditionally processed using motion capture software, requiring intensive manual input. We propose and study an automated method of gap-filling that uses inverse kinematics (IK) to close the loop of an iterative process to minimize error, while nearl...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Camargo J,Ramanathan A,Csomay-Shanklin N,Young A

更新日期：2020-11-01 00:00:00

abstract：:In order to have research on the deformation characteristics and mechanical properties of human red blood cells (RBCs), finite element models of RBC optical tweezers stretching and atomic force microscope (AFM) indentation were established. Non-linear elasticity of cell membrane was determined by using the neo-Hookean...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wang Y,Sang J,Ao R,Ma Y,Fu B

更新日期：2020-11-01 00:00:00

abstract：:Computer models of the human face have the potential to be used as powerful tools in surgery simulation and animation development applications. While existing models accurately represent various anatomical features of the face, the representation of the skin and soft tissues is very simplified. A computer model of the...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Flynn C,Stavness I,Lloyd J,Fels S

更新日期：2015-01-01 00:00:00

abstract：:Computational models are increasingly being used to investigate the mechanical properties of cardiac tissue. While much insight has been gained from these studies, one important limitation associated with computational modeling arises when using in vivo images of the heart to generate the reference state of the model....

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Nikou A,Dorsey SM,McGarvey JR,Gorman JH 3rd,Burdick JA,Pilla JJ,Gorman RC,Wenk JF

更新日期：2016-12-01 00:00:00

abstract：:Pedestrians are the most vulnerable road user and represent about 23% of the road traffic deaths in the world. A finite element (FE) model corresponding to a 5th percentile female pedestrian (F05-PS) was developed by morphing the Global Human Body Models Consortium (GHBMC) 50th percentile male pedestrian (M50-PS) mode...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Pak W,Meng Y,Schap J,Koya B,Gayzik FS,Untaroiu CD

更新日期：2020-12-01 00:00:00

abstract：:Being seated for long periods, while part of many leisure or occupational activities, can lead to discomfort, pain and sometimes health issues. The impact of prolonged sitting on the body has been widely studied in the literature, with a large number of human-body finite element models developed to simulate sitting an...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Savonnet L,Wang X,Duprey S

更新日期：2018-03-01 00:00:00

abstract：:This study deals with recent researches undertaken by the authors in the field of hydrodynamics of human swimming. The aim of this numerical study was to investigate the flow around the entire swimmer's body. The results presented in this article focus on the combination of a 3D computational fluid dynamics code and t...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Popa CV,Arfaoui A,Fohanno S,Taïar R,Polidori G

更新日期：2014-01-01 00:00:00

abstract：:Sparse geometric information from limited field-of-view medical images is often used to reconstruct the femur in biomechanical models of the hip and knee. However, the full femur geometry is needed to establish boundary conditions such as muscle attachment sites and joint axes which define the orientation of joint loa...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Zhang J,Besier TF

更新日期：2017-04-01 00:00:00

abstract：:The aim of this work was to improve the constitutive model of the human mandible and dentition system by taking into account the non-linear material properties of the structural boney matrix that forms the human jaw bone or mandible. Due to the specific structure of the jaw bone the time dependence of the mechanical p...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Vitins V,Dobelis M,Middleton J,Limbert G,Knets I

更新日期：2003-10-01 00:00:00

abstract：:Most of musculoskeletal models (MSKM) estimate the tibiofemoral joint reaction load at a single point or do not support large lower-limb ranges. This study aimed to adapt a generic MSKM that allows large knee and hip flexions to compute medial and lateral tibiofemoral contact forces (TFCF) during gait and squat tasks....

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Bedo BLS,Catelli DS,Lamontagne M,Santiago PRP

更新日期：2020-08-01 00:00:00

abstract：:The mechanical properties of soft biological tissues in general and early stage engineered tissues in particular limit the feasibility of conventional tensile tests for their mechanical characterisation. Furthermore, the most important mode in development of deep tissue injury (DTI) is compression. Therefore, an inver...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Cox MA,Gawlitta D,Driessen NJ,Oomens CW,Baaijens FP

更新日期：2008-10-01 00:00:00

abstract：:Manual segmentation of articular cartilage from knee joint 3D magnetic resonance images (MRI) is a time consuming and laborious task. Thus, automatic methods are needed for faster and reproducible segmentations. In the present study, we developed a semi-automatic segmentation method based on radial intensity profiles ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Liukkonen MK,Mononen ME,Tanska P,Saarakkala S,Nieminen MT,Korhonen RK

更新日期：2017-10-01 00:00:00

abstract：:This work is concerned with the lubrication analysis of artificial knee joints, which plays an increasing significant role in clinical performance and longevity of components. Time-dependent elastohydrodynamic lubrication analysis for normal total knee replacement is carried out under the cyclic variation in both load...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Su Y,Yang P,Fu Z,Jin Z,Wang C

更新日期：2011-06-01 00:00:00

abstract：:Many methods developed for estimating the reliability of protein-protein interactions are based on the topology of protein-protein interaction networks. This paper describes a new reliability measure for protein-protein interactions, which does not rely on the topology of protein interaction networks, but expresses bi...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Park B,Han K

更新日期：2010-02-01 00:00:00

abstract：:In this paper, a qualitative comparison between two types of dental implants with respect to their behaviour under immediate loading is presented. This analysis has been carried out using the finite element method. Since micromotions (and not the load) are responsible of the appearance of a fibrous interface avoiding ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Pérez del Palomar A,Arruga A,Cegoñino J,Doblaré M

更新日期：2005-02-01 00:00:00

abstract：:Soft tissue modelling has gained a great deal of importance, for a large part due to its application in surgical training simulators for minimally invasive surgery (MIS). This article provides a structured overview of different continuum-mechanical models that have been developed over the years. It aims at facilitatin...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Famaey N,Vander Sloten J

更新日期：2008-08-01 00:00:00

abstract：:In this study we aim at investigating the applicability of underwater 3D motion capture based on submerged video cameras in terms of 3D accuracy analysis and trajectory reconstruction. Static points with classical direct linear transform (DLT) solution, a moving wand with bundle adjustment and a moving 2D plate with Z...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Silvatti AP,Cerveri P,Telles T,Dias FA,Baroni G,Barros RM

更新日期：2013-01-01 00:00:00

abstract：:Several opensource or commercially available software platforms are widely used to develop dynamic simulations of movement. While computational approaches are conceptually similar across platforms, technical differences in implementation may influence output. We present a new upper limb dynamic model as a tool to eval...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Saul KR,Hu X,Goehler CM,Vidt ME,Daly M,Velisar A,Murray WM

更新日期：2015-01-01 00:00:00

abstract：:The present paper describes a geometrically and physically nonlinear continuum model to study the mechanical behaviour of passive and active skeletal muscle. The contraction is described with a Huxley type model. A Distributed Moments approach is used to convert the Huxley partial differential equation in a set of ord...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Gielen AW,Oomens CW,Bovendeerd PH,Arts T,Janssen JD

更新日期：2000-01-01 00:00:00

abstract：:An appropriate method of application of the hip-joint force and stress analysis of the pelvic bone, in particular the acetabulum, is necessary to investigate the changes in load transfer due to implantation and to calculate the reference stimulus for bone remodelling simulations. The purpose of the study is to develop...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ghosh R,Pal B,Ghosh D,Gupta S

更新日期：2015-01-01 00:00:00

abstract：:The clinical importance of measuring local pulse wave velocity (PWV), has encouraged researchers to develop several local methods to estimate it. In this work, we proposed a new method, the sum-of-squares method [Formula: see text], that allows the estimations of PWV by using simultaneous measurements of blood pressur...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Abdessalem KB,Flaud P,Zobaidi S

更新日期：2018-01-01 00:00:00

abstract：:Modeling tumor growth in biological systems is a challenging problem with important consequences for diagnosis and treatment of various forms of cancer. This growth process requires large simulation complexity due to evolving biological and chemical processes in living tissue and interactions of cellular and vascular ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Puzyrev V,Łoś M,Gurgul G,Calo V,Dzwinel W,Paszyński M

更新日期：2019-12-01 00:00:00

abstract：:Woodpeckers can withstand a fierce impact during pecking without any brain injury. Although directly involved in the whole pecking, the role of the jaw apparatus played in the impact-resistant process of woodpeckers is still not fully clear. We employed finite element analysis, impact tests in vivo, and post-traumatic...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Xu P,Ni Y,Lu S,Liu S,Zhou X,Fan Y

更新日期：2021-01-13 00:00:00

abstract：:Finite element analysis provides a means of describing cellular mechanics in tissue, which can be useful in understanding and predicting physiological and pathological changes. Many prior studies have been limited to simulations of models containing single cells, which may not accurately describe the influence of mech...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Bennetts CJ,Sibole S,Erdemir A

更新日期：2015-01-01 00:00:00

abstract：:Convective transports in the vertebral end plate (VEP) play a significant role in the homeostasis of the spine. A few studies hypothesised that the hydraulic resistance or effective permeability of the VEP could be dependant upon fluid-flow direction. Results were influenced by species, region of interest within the e...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Swider P,Accadbled F,Laffosse JM,Sales de Gauzy J

更新日期：2012-01-01 00:00:00

abstract：:Numerical modelling of the cardiovascular system is becoming an important tool for assessing the influence of heart disease and treatment therapies. In the current study, we present an approach for modelling the interaction between the heart and the circulatory system. This was accomplished by creating animal-specific...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wenk JF,Ge L,Zhang Z,Soleimani M,Potter DD,Wallace AW,Tseng E,Ratcliffe MB,Guccione JM

更新日期：2013-01-01 00:00:00

abstract：:Biomechanical imaging techniques have been developed for soft tissue characterisation and detection of breast tumours. Harmonic motion imaging (HMI) uses a focused ultrasound technology to generate a harmonic radiation force in a localised region inside a soft tissue. The resulting dynamic response is used to map the ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Zhao X,Pelegri AA

更新日期：2014-01-01 00:00:00