The accuracy of active shape modelling and end-plate measurements for characterising the shape of the lumbar spine in the sagittal plane.

abstract：:Unbalanced contact force on the tibial component has been considered a factor leading to loosening of the implant and increased wear of the bearing surface in total knee arthroplasty. Because it has been reported that good alignment cannot guarantee successful clinical outcomes, the soft tissue balance should be check...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Oh KJ,Park WM,Kim K,Kim YH

更新日期：2014-01-01 00:00:00

abstract：:Factors related to micromovements at bone-implant interface have been studied because they are considered adverse to osseointegration. Simplifications are commonly observed in these FEA evaluations. The aim of this study was to clarify the influence of FEA parameters (boundary conditions and bone properties) on the st...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dos Santos MBF,Meloto GO,Bacchi A,Correr-Sobrinho L

更新日期：2017-06-01 00:00:00

abstract：:In pre-surgery decisions in hospital emergency cases, fast and reliable results of the solid and fluid mechanics problems are of great interest to clinicians. In the current investigation, an iterative process based on a pressure-type boundary condition is proposed in order to reduce the computational costs of blood f...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Afkari D,Gabaldón F

更新日期：2016-01-01 00:00:00

abstract：:In almost all finite element (FE) studies in dentistry, virtual forces are applied directly to dentures. The purpose of this study was to develop a FE model with non-linear contact simulation using an antagonist as force transmitter and to compare this with a similar model that uses direct force transmission. Furtherm...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Rand A,Stiesch M,Eisenburger M,Greuling A

更新日期：2017-08-01 00:00:00

abstract：:Use of finite element (FE) foot model as a clinical diagnostics tool is likely to improve the specificity of foot injury predictions in the diabetic population. Here we proposed a novel workflow for rapid construction of foot FE model incorporating realistic geometry of metatarsals encapsulated into lumped forefoot's ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Chen WM,Lee SJ,Lee PVS

更新日期：2017-10-01 00:00:00

abstract：:Finite element (FE) analysis is a cornerstone of orthopaedic biomechanics research. Three-dimensional medical imaging provides sufficient resolution for the subject-specific FE models to be generated from these data-sets. FE model development requires discretisation of a three-dimensional domain, which can be the most...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ramme AJ,Shivanna KH,Criswell AJ,Kallemeyn NA,Magnotta VA,Grosland NM

更新日期：2012-01-01 00:00:00

abstract：:It is challenging to measure the finger's kinematics of underlying bones in vivo. This paper presents a new method of finger kinematics measurement, using a geometric finger model and several markers deliberately stuck on skin surface. Using a multiple-view camera system, the optimal motion parameters of finger model ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Chang CW,Kuo LC,Jou IM,Su FC,Sun YN

更新日期：2013-01-01 00:00:00

abstract：:Functional Alignment is a new method to determine the orientation of a joint's primary rotational axis and the associated movement. It employs three unique concepts. First, data analyses are based upon assessment of spatial positions and not upon movement in a time sequence. Second, analyses are conducted on derived j...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ball KA,Greiner TM

更新日期：2012-01-01 00:00:00

abstract：:In order to have research on the deformation characteristics and mechanical properties of human red blood cells (RBCs), finite element models of RBC optical tweezers stretching and atomic force microscope (AFM) indentation were established. Non-linear elasticity of cell membrane was determined by using the neo-Hookean...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wang Y,Sang J,Ao R,Ma Y,Fu B

更新日期：2020-11-01 00:00:00

abstract：:The aim of this paper is to use a poroviscohyperelastic (PVHE) model, which is developed based on the porohyperelastic (PHE) model to explore the mechanical deformation properties of single chondrocytes. Both creep and relaxation responses are investigated by using finite element analysis models of micropipette aspira...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Nguyen TD,Oloyede A,Gu Y

更新日期：2016-01-01 00:00:00

abstract：:This paper simulates an axon with a region of reversed microtubule (MT) polarity, and investigates how the degree of polar mismatching in this region affects the formation of organelle traps in the axon. The model is based on modified Smith-Simmons equations governing molecular-motor-assisted transport in neurons. It ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Kuznetsov AV

更新日期：2010-12-01 00:00:00

abstract：:Computer models of the human face have the potential to be used as powerful tools in surgery simulation and animation development applications. While existing models accurately represent various anatomical features of the face, the representation of the skin and soft tissues is very simplified. A computer model of the...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Flynn C,Stavness I,Lloyd J,Fels S

更新日期：2015-01-01 00:00:00

abstract：:Work-related musculoskeletal disorders (WMSDs) have become increasingly common among dentists and initiate a series of events that could result in a career ending. This study aims to construct a system for predicting and preventing WMSD among dentists. We used Bayesian network (BN) that describes the mutual relationsh...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Thanathornwong B,Suebnukarn S,Songpaisan Y,Ouivirach K

更新日期：2014-01-01 00:00:00

abstract：:The study of the topological organisation of myocardial cells is a basic requirement for understanding the mechanical design of the normal and pathological heart. Anatomical observations show that cardiac muscle tissue has a highly specialized architecture. We have made new quantitative measurements of fibre orientati...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ohayon J,Usson Y,Jouk PS,Cai H

更新日期：1999-01-01 00:00:00

abstract：:Musculoskeletal finite element analysis (FEA) has been essential to research in orthopaedic biomechanics. The generation of a volumetric mesh is often the most challenging step in a FEA. Hexahedral meshing tools that are based on a multi-block approach rely on the manual placement of building blocks for their mesh gen...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ramme AJ,Shivanna KH,Magnotta VA,Grosland NM

更新日期：2011-10-01 00:00:00

abstract：:Understanding of cancellous bone permeability is lacking despite its importance in designing tissue engineering scaffolds for bone regeneration and orthopaedic surgery that relies on infiltration of bone cement into porous cancellous bone. We employed micro-computational fluid dynamics to investigate permeability for ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Teo JC,Teoh SH

更新日期：2012-01-01 00:00:00

abstract：:The human jaw's structure-function relationships are complex. A recent example of this complexity is the lateral pterygoid muscle which we now consider as a single unit made up of functional regions with activity in each dependent on the biomechanical demands of the task. We have also characterised the effects on the ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Peck CC,Wirianski A,Murray GM

更新日期：2010-08-01 00:00:00

abstract：:Pedestrians are the most vulnerable road user and represent about 23% of the road traffic deaths in the world. A finite element (FE) model corresponding to a 5th percentile female pedestrian (F05-PS) was developed by morphing the Global Human Body Models Consortium (GHBMC) 50th percentile male pedestrian (M50-PS) mode...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Pak W,Meng Y,Schap J,Koya B,Gayzik FS,Untaroiu CD

更新日期：2020-12-01 00:00:00

abstract：:Big data and its approaches are generally helpful for healthcare and biomedical sectors for predicting the disease. For trivial symptoms, the difficulty is to meet the doctors at any time in the hospital. Thus, big data provides essential data regarding the diseases on the basis of the patient's symptoms. For several ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ampavathi A,Saradhi TV

更新日期：2021-01-11 00:00:00

abstract：:An approach was developed to evaluate the load transfer mechanism in the temporomandibular joint (TMJ) area before, during and after mandibular ramus elongation by distraction osteogenesis (DO). In a concerted approach using computer tomography, magnetic resonance imaging (MRI), and finite element analysis, three-dime...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Cattaneo PM,Kofod T,Dalstra M,Melsen B

更新日期：2005-06-01 00:00:00

abstract：:Both inter-lamellar and intra-lamellar failures of the annulus have been described as potential modes of disc herniation. Attempts to characterize initial lamellar failure of the annulus have involved tensile testing of small tissue samples. The purpose of this study was to evaluate a method of measuring local surface...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Karakolis T,Callaghan JP

更新日期：2015-01-01 00:00:00

abstract：:Rupture prediction of abdominal aortic aneurysms (AAAs) remains a clinical challenge. Finite element analysis (FEA) may allow for improved identification for intervention timing, but the method needs further substantiation. In this study, experimental photoelastic method and finite element techniques were compared usi...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Callanan A,Morris LG,McGloughlin TM

更新日期：2012-01-01 00:00:00

abstract：:This work is concerned with the lubrication analysis of artificial knee joints, which plays an increasing significant role in clinical performance and longevity of components. Time-dependent elastohydrodynamic lubrication analysis for normal total knee replacement is carried out under the cyclic variation in both load...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Su Y,Yang P,Fu Z,Jin Z,Wang C

更新日期：2011-06-01 00:00:00

abstract：OBJECTIVE:Develop a finite element (FE) model of a skull to perform biomechanical studies of maxillary expansion using bone anchors (BA). MATERIALS AND METHODS:A skull model was developed and assigned material properties based on Hounsfield unit (HU) values of cone-beam computerized tomography (CBCT) images. A 3 mm di...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Fang Y,Lagravère MO,Carey JP,Major PW,Toogood RR

更新日期：2007-04-01 00:00:00

abstract：:Ageing influences gait patterns which in turn can affect the balance control of human locomotion. Entropy-based regularity and complexity measures have been highly effective in analysing a broad range of physiological signals. Minimum toe clearance (MTC) is an event during the swing phase of the gait cycle and is high...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Karmakar C,Khandoker A,Begg R,Palaniswami M

更新日期：2013-01-01 00:00:00

abstract：:Musculoskeletal research questions regarding the prevention or rehabilitation of the hand can be addressed using inverse dynamics simulations when experiments are not possible. To date, no complete human hand model implemented in a holistic human body model has been fully developed. The aim of this work was to develop...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Engelhardt L,Melzner M,Havelkova L,Fiala P,Christen P,Dendorfer S,Simon U

更新日期：2020-12-10 00:00:00

abstract：:To explore which TLIF techniques are advantageous in reducing the risk of complications and conducive to bone fusion under the vibration. The L1-L5 finite element lumbar model was modified to simulate three different TLIF techniques (a unilateral standard cage, a crescent-shaped cage, and bilateral standard cages). Th...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wang QD,Guo LX

更新日期：2020-10-13 00:00:00

abstract：:Peristaltic motion of a non-Newtonian Carreau fluid is analyzed in a curved channel under the long wavelength and low Reynolds number assumptions, as a simulation of digestive transport. The flow regime is shown to be governed by a dimensionless fourth-order, nonlinear, ordinary differential equation subject to no-sli...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ali N,Javid K,Sajid M,Anwar Bég O

更新日期：2016-01-01 00:00:00

abstract：:Transcatheter aortic valve replacement (TAVR) strongly depends on the calcification patterns, which may lead to a malapposition of the stented valve and complication onsets in terms of structure kinematics and paravalvular leakage (PVL). From one anatomical-resembling model of the aortic root, six configurations with ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Luraghi G,Matas JFR,Beretta M,Chiozzi N,Iannetti L,Migliavacca F

更新日期：2020-09-14 00:00:00

abstract：:The article presents advanced computer simulations aimed at the accurate modelling of human tibio-femoral joints (TFJs) in terms of anatomy, physiological loading and constitutive behaviour of the tissues. The main objective of this research is to demonstrate the implications that the implementation of different artic...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Mattei L,Campioni E,Accardi MA,Dini D

更新日期：2014-01-01 00:00:00