Flow-induced wall shear stress in abdominal aortic aneurysms: Part I--steady flow hemodynamics.

abstract：:Three non-Newtonian blood viscosity models plus the Newtonian one are analysed for a patient-specific thoracic aorta anatomical model under steady-state flow conditions via wall shear stress (WSS) distribution, non-Newtonian importance factors, blood viscosity and shear rate. All blood viscosity models yield a consist...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Caballero AD,Laín S

更新日期：2015-08-01 00:00:00

abstract：:This paper analyses the mechanical behaviour of a new reinforced anatomical post-systems (RAPS) for endodontic restoration. The composite restorative material (CRM) completely fills the root canal (as do the commonly used cast metal posts) and multiple prefabricated composite posts (PCPs) are employed as reinforcement...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Maceri F,Martignoni M,Vairo G

更新日期：2009-02-01 00:00:00

abstract：:We investigate the behavior of a spherical cavity in a soft biological tissue modeled as a deformable porous material during an injection of non-Newtonian fluid that follows a power law model. Fluid flows into the neighboring tissue due to high cavity pressure where it is absorbed by capillaries and lymphatics at a ra...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ahmed A,Siddique JI,Mahmood A

更新日期：2017-10-01 00:00:00

abstract：:In electromagnetic dosimetry, anatomical human models are commonly obtained by segmentation of magnetic resonance imaging or computed tomography scans. In this paper, a human head model extracted from thermal infrared images is examined in terms of its applicability to specific absorption rate (SAR) calculations. Sinc...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Gasmelseed A

更新日期：2011-07-01 00:00:00

abstract：:This study is aimed at setting a method of experimental parameter estimation for large-deforming nonlinear viscoelastic continuous fibre-reinforced composite material model. Specifically, arterial tissue was investigated during experimental research and parameter estimation studies, due to medical, scientific and soci...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Sunbuloglu E,Bozdag E,Toprak T,Islak C

更新日期：2013-01-01 00:00:00

abstract：:Woodpeckers can withstand a fierce impact during pecking without any brain injury. Although directly involved in the whole pecking, the role of the jaw apparatus played in the impact-resistant process of woodpeckers is still not fully clear. We employed finite element analysis, impact tests in vivo, and post-traumatic...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Xu P,Ni Y,Lu S,Liu S,Zhou X,Fan Y

更新日期：2021-01-13 00:00:00

abstract：:Much attention has been devoted to how playground swing amplitudes are built up by swinger techniques, i.e. body actions. However, very little attention has been given to the requirements that such swinger techniques place on the swinger himself. The purpose of this study was to find out whether different swinger tech...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Linge SO

更新日期：2012-01-01 00:00:00

abstract：:Design optimization for cementless hip prosthesis signifies one of the key topics of research to improve its performances. However, majority of the studies have not considered the presence of uncertainties while it has been shown that a deterministic optimization leads to an unreliable design. In this paper, a multi-o...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dammak K,El Hami A

更新日期：2020-09-01 00:00:00

abstract：:Sparse geometric information from limited field-of-view medical images is often used to reconstruct the femur in biomechanical models of the hip and knee. However, the full femur geometry is needed to establish boundary conditions such as muscle attachment sites and joint axes which define the orientation of joint loa...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Zhang J,Besier TF

更新日期：2017-04-01 00:00:00

abstract：:The current study aimed to evaluate physical training effects. For this purpose, a classifier was implemented by taking into account biomechanical features selected from force-plate measurements and a neurofuzzy algorithm for data management and relevant decision-making. Measurements included two sets of sit-to-stand ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Vannozzi G,Pecoraro F,Caserotti P,Cappozzo A

更新日期：2008-02-01 00:00:00

abstract：:New trends of numerical models of human joints require more and more computation of both large amplitude joint motions and fine bone stress distribution. Together, these problems are difficult to solve and very CPU time consuming. The goal of this study is to develop a new method to diminish the calculation time for t...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Büchler P,Rakotomanana L,Farron A

更新日期：2002-12-01 00:00:00

abstract：:The presence of a spiral arterial blood flow pattern in humans has been widely accepted. It is believed that this spiral component of the blood flow alters arterial haemodynamics in both positive and negative ways. The purpose of this study was to determine the effect of spiral flow on haemodynamic changes in aorta-re...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Javadzadegan A,Simmons A,Barber T

更新日期：2016-01-01 00:00:00

abstract：:Musculoskeletal finite element analysis (FEA) has been essential to research in orthopaedic biomechanics. The generation of a volumetric mesh is often the most challenging step in a FEA. Hexahedral meshing tools that are based on a multi-block approach rely on the manual placement of building blocks for their mesh gen...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ramme AJ,Shivanna KH,Magnotta VA,Grosland NM

更新日期：2011-10-01 00:00:00

abstract：:Many methods developed for estimating the reliability of protein-protein interactions are based on the topology of protein-protein interaction networks. This paper describes a new reliability measure for protein-protein interactions, which does not rely on the topology of protein interaction networks, but expresses bi...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Park B,Han K

更新日期：2010-02-01 00:00:00

abstract：:This paper presents a procedure for characterising the mechanical properties of skin using stochastic inverse identification. It is based on the minimisation of a cost function relative to the comparison between experimental suction experiments and their corresponding finite element models. Two different models are co...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Delalleau A,Josse G,Lagarde JM

更新日期：2012-01-01 00:00:00

abstract：:A numerical pressure loss model previously used for adult human airways has been modified to simulate the inhalation pressure distribution in a healthy 9-month-old infant lung morphology model. Pressure distributions are calculated for air as well as helium and xenon mixtures with oxygen to investigate the effects of ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Gouinaud L,Katz I,Martin A,Hazebroucq J,Texereau J,Caillibotte G

更新日期：2015-01-01 00:00:00

abstract：:To extend the use of computational techniques like finite element analysis to clinical settings, it would be beneficial to have the ability to generate a unique model for every subject quickly and efficiently. This work is an extension of two previously developed mapped meshing tools that utilised force and displaceme...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Kallemeyn NA,Natarajan A,Magnotta VA,Grosland NM

更新日期：2013-01-01 00:00:00

abstract：:The effect on the signal amplitude of ultrasonic waves propagating along cortical bone plates was modelled using a 2D Finite Difference code. Different healing stages, represented by modified fracture geometries were introduced to the plate model. A simple transverse and oblique fracture filled with water was introduc...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dodd SP,Miles AW,Gheduzzi S,Humphrey VF,Cunningham JL

更新日期：2007-10-01 00:00:00

abstract：:The Montgomery T-tube is used as a combined tracheal stent and airway after laryngotracheoplasty, to keep the lumen open and prevent mucosal laceration from scarring. It is valuable in the management of upper and mid-tracheal lesions, while invaluable in long and multisegmental stenting lesions. Numerical simulations ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Trabelsi O,Malvè M,Mena Tobar A,Doblaré M

更新日期：2015-01-01 00:00:00

abstract：:In pre-surgery decisions in hospital emergency cases, fast and reliable results of the solid and fluid mechanics problems are of great interest to clinicians. In the current investigation, an iterative process based on a pressure-type boundary condition is proposed in order to reduce the computational costs of blood f...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Afkari D,Gabaldón F

更新日期：2016-01-01 00:00:00

abstract：:Finite element (FE) analysis is a cornerstone of orthopaedic biomechanics research. Three-dimensional medical imaging provides sufficient resolution for the subject-specific FE models to be generated from these data-sets. FE model development requires discretisation of a three-dimensional domain, which can be the most...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ramme AJ,Shivanna KH,Criswell AJ,Kallemeyn NA,Magnotta VA,Grosland NM

更新日期：2012-01-01 00:00:00

abstract：:A parametric investigation was conducted to determine the effects on the load estimation method of varying: (1) the thickness of back-plates used in the two-dimensional finite element models of long bones, (2) the number of columns of nodes in the outer medial and lateral sections of the diaphysis to which the back-pl...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Bona MA,Martin LD,Fischer KJ

更新日期：2006-08-01 00:00:00

abstract：:Several opensource or commercially available software platforms are widely used to develop dynamic simulations of movement. While computational approaches are conceptually similar across platforms, technical differences in implementation may influence output. We present a new upper limb dynamic model as a tool to eval...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Saul KR,Hu X,Goehler CM,Vidt ME,Daly M,Velisar A,Murray WM

更新日期：2015-01-01 00:00:00

abstract：:The paper gives a bibliographical review of the finite element modelling and simulations in dentistry from the theoretical as well as practical points of view. The bibliography lists references to papers, conference proceedings and theses/dissertations that were published between 1990 and 2003. At the end of this pape...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Mackerle J

更新日期：2004-10-01 00:00:00

abstract：:This work presents a biomechanical study of myringosclerosis (MS), an abnormal condition of the ear that produces calcification of the lamina propria of the eardrum. The study researched the transfer of sound to the stapes depending on the localization, dimension and calcification degree of the MS plaques. Results wer...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Berdich K,Gentil F,Parente M,Garbe C,Santos C,Paço J,Natal Jorge RM,Martins P,Faur N

更新日期：2016-02-01 00:00:00

abstract：:The aim of this study is to evaluate the fracture union or non-union for a specific patient that presented oblique fractures in tibia and fibula, using a mechanistic-based bone healing model. Normally, this kind of fractures can be treated through an intramedullary nail using two possible configurations that depends o...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Alierta JA,Pérez MA,Seral B,García-Aznar JM

更新日期：2016-09-01 00:00:00

abstract：:The rate of bone loss is subject to considerable variation between individuals. With the 'mechanostat' model of Frost, genetic variations in bone mechanoresponsiveness are modelled by different mechanostat 'setpoints'--which may also change with age or disease. In this paper, the following setpoints are used: epsilonm...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Mulvihill BM,Prendergast PJ

更新日期：2008-10-01 00:00:00

abstract：:This article develops a two prion population model that simulates prion trafficking between an infected dendritic cell and a neuron. The situation when the two cells are connected by a tunnelling nanotube (TNT) is simulated. Two mechanisms of prion transport are considered: lateral diffusion in the TNT membrane and ac...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Kuznetsov IA,Kuznetsov AV

更新日期：2014-11-01 00:00:00

abstract：:Monitoring of skin blood flow oscillations related with mechanical activity of vessels is a very useful modality during diagnosis of peripheral hemodynamic disorders. In this study, we developed a new model and technique for real-time conversion of skin temperature into skin blood flow oscillations, and vice versa. Th...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Sagaidachnyi A,Fomin A,Usanov D,Skripal A

更新日期：2019-09-01 00:00:00

abstract：:This work is concerned with the lubrication analysis of artificial knee joints, which plays an increasing significant role in clinical performance and longevity of components. Time-dependent elastohydrodynamic lubrication analysis for normal total knee replacement is carried out under the cyclic variation in both load...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Su Y,Yang P,Fu Z,Jin Z,Wang C

更新日期：2011-06-01 00:00:00