Density-based load estimation using two-dimensional finite element models: a parametric study.

abstract：:This paper simulates an axon with a region of reversed microtubule (MT) polarity, and investigates how the degree of polar mismatching in this region affects the formation of organelle traps in the axon. The model is based on modified Smith-Simmons equations governing molecular-motor-assisted transport in neurons. It ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Kuznetsov AV

更新日期：2010-12-01 00:00:00

abstract：:The purpose of this study was to propose an innovative approach of setting outlet boundary conditions for the computational fluid dynamics (CFD) simulation of human common carotid arteries (CCAs) bifurcation based on the concept of energy loss minimisation at flow bifurcation. Comparisons between this new approach and...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Zhang Y,Furusawa T,Sia SF,Umezu M,Qian Y

更新日期：2013-01-01 00:00:00

abstract：:The flow effect on the concentration of platelet active substances in the vicinity of a mural microthrombus is investigated numerically. A three-dimensional model is employed in which the mural microthrombus is modelled as a semisphere attached to a plane surface. The description of the blood flow uses the three-dimen...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Karner G,Perktold K

更新日期：1998-01-01 00:00:00

abstract：:Woodpeckers can withstand a fierce impact during pecking without any brain injury. Although directly involved in the whole pecking, the role of the jaw apparatus played in the impact-resistant process of woodpeckers is still not fully clear. We employed finite element analysis, impact tests in vivo, and post-traumatic...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Xu P,Ni Y,Lu S,Liu S,Zhou X,Fan Y

更新日期：2021-01-13 00:00:00

abstract：:An effective way to avoid invading or injuring the subjects is to use the musculoskeletal model when studying the dynamic properties of muscles in vivo. So, we put forward a joint coordinate system-based method, which mainly focuses on the coordinate's transformation of corresponding muscle attachment points, respecti...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Tang G,Zhang XA,Zhang LL,Wang HS,Nie WZ,Wang CT

更新日期：2011-07-01 00:00:00

abstract：:This paper analyses the mechanical behaviour of a new reinforced anatomical post-systems (RAPS) for endodontic restoration. The composite restorative material (CRM) completely fills the root canal (as do the commonly used cast metal posts) and multiple prefabricated composite posts (PCPs) are employed as reinforcement...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Maceri F,Martignoni M,Vairo G

更新日期：2009-02-01 00:00:00

abstract：:Oscillatory shear stress (OSS), caused by time-varying flow environments, may play a critical role in the production of engineered tissue by bone marrow-derived stem cells. This is particularly relevant in heart valve tissue engineering (HVTE), owing to the intense haemodynamic environments that surround native valves...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Salinas M,Schmidt DE,Libera M,Lange RR,Ramaswamy S

更新日期：2014-05-01 00:00:00

abstract：:The aim of this study was to investigate and present a new mapping method to describe muscle pain sensitivity based on the assessment of pressure pain threshold (PPT) over the trapezius muscle. PPT data were recorded from 36 points in 20 healthy males using a standardised grid. Points were clustered using the K-means ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Binderup AT,Arendt-Nielsen L,Madeleine P

更新日期：2010-12-01 00:00:00

abstract：:Microstructural features including osteons and cement lines are considered to play an important role in determining the crack growth behaviour in cortical bone. This study aims to develop a computational mechanics approach to evaluate microscale fracture mechanisms in bone. In this study, finite element models based o...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Mischinski S,Ural A

更新日期：2013-01-01 00:00:00

abstract：:The objective of this investigation was to develop probabilistic finite element (FE) models of the anterior longitudinal ligament (ALL) and posterior longitudinal ligament (PLL) of the cervical spine that incorporate the natural variability of biological specimens. In addition to the model development, a rigorous vali...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Francis WL,Eliason TD,Thacker BH,Paskoff GR,Shender BS,Nicolella DP

更新日期：2014-01-01 00:00:00

abstract：:This study is devoted to the development of a non-linear anisotropic model for the human periodontal ligament (PDL). A thorough knowledge of the behaviour of the PDL is vital in understanding the mechanics of orthodontic tooth mobility, soft tissue response and proposed treatment plans. There is considerable evidence ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Zhurov AI,Limbert G,Aeschlimann DP,Middleton J

更新日期：2007-06-01 00:00:00

abstract：:Rupture prediction of abdominal aortic aneurysms (AAAs) remains a clinical challenge. Finite element analysis (FEA) may allow for improved identification for intervention timing, but the method needs further substantiation. In this study, experimental photoelastic method and finite element techniques were compared usi...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Callanan A,Morris LG,McGloughlin TM

更新日期：2012-01-01 00:00:00

abstract：:To extend the use of computational techniques like finite element analysis to clinical settings, it would be beneficial to have the ability to generate a unique model for every subject quickly and efficiently. This work is an extension of two previously developed mapped meshing tools that utilised force and displaceme...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Kallemeyn NA,Natarajan A,Magnotta VA,Grosland NM

更新日期：2013-01-01 00:00:00

abstract：:In almost all finite element (FE) studies in dentistry, virtual forces are applied directly to dentures. The purpose of this study was to develop a FE model with non-linear contact simulation using an antagonist as force transmitter and to compare this with a similar model that uses direct force transmission. Furtherm...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Rand A,Stiesch M,Eisenburger M,Greuling A

更新日期：2017-08-01 00:00:00

abstract：:In this study we aim at investigating the applicability of underwater 3D motion capture based on submerged video cameras in terms of 3D accuracy analysis and trajectory reconstruction. Static points with classical direct linear transform (DLT) solution, a moving wand with bundle adjustment and a moving 2D plate with Z...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Silvatti AP,Cerveri P,Telles T,Dias FA,Baroni G,Barros RM

更新日期：2013-01-01 00:00:00

abstract：:Electrocardiogram (ECG) signals are difficult to interpret, and clinicians must undertake a long training process to learn to diagnose diabetes from subtle abnormalities in these signals. To facilitate these diagnoses, we have developed a technique based on the heart rate variability signal obtained from ECG signals. ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Acharya UR,Faust O,Sree SV,Ghista DN,Dua S,Joseph P,Ahamed VI,Janarthanan N,Tamura T

更新日期：2013-01-01 00:00:00

abstract：:To explore which TLIF techniques are advantageous in reducing the risk of complications and conducive to bone fusion under the vibration. The L1-L5 finite element lumbar model was modified to simulate three different TLIF techniques (a unilateral standard cage, a crescent-shaped cage, and bilateral standard cages). Th...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wang QD,Guo LX

更新日期：2020-10-13 00:00:00

abstract：:A critical point in models of the human limbs when the aim is to investigate the motor control is the muscle model. More often the mechanical output of a muscle is considered as one musculotendon force that is a design variable in optimization tasks solved predominantly by static optimization. For dynamic conditions, ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Raikova R,Aladjov H

更新日期：2003-06-01 00:00:00

abstract：:Cell migration relies on traction forces in order to propel a cell. Several computational models have been developed that help explain the trajectory that cells take during migration, but little attention has been placed on traction forces during this process. Here, we investigated the spatiotemporal dynamics of cell ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Han SJ,Sniadecki NJ

更新日期：2011-05-01 00:00:00

abstract：:Use of finite element (FE) foot model as a clinical diagnostics tool is likely to improve the specificity of foot injury predictions in the diabetic population. Here we proposed a novel workflow for rapid construction of foot FE model incorporating realistic geometry of metatarsals encapsulated into lumped forefoot's ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Chen WM,Lee SJ,Lee PVS

更新日期：2017-10-01 00:00:00

abstract：:Preoperative planning, or intraoperative navigation of hip surgery, including joint-preserving procedures such as osteotomy or joint-replacing procedures such as total arthroplasty, needs to be performed with a high degree of accuracy to ensure a successful outcome. The ability to precisely localise the hip joint rota...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Kang MJ,Sadri H,Stern R,Magnenat-Thalmann N,Hoffmeyer P,Ji HS

更新日期：2011-01-01 00:00:00

abstract：:The display of three-dimensional angiograms can benefit from the knowledge of quantitative shape features such as tangent and curvature of the centerline of vessels. These can be obtained from a curve-like skeleton representation. If connectivity and topology are preserved, and if geometrical constraints such as smoot...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Yi D,Hayward V

更新日期：2002-10-01 00:00:00

abstract：:The drug-eluting stent (DES) has become the gold standard worldwide for the treatment of cardiovascular diseases. In recent years, an innovative variation of the DES with micro-sized drug reservoirs has been introduced. It allows programmable drug delivery with both spatial and temporal control and has several potenti...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Hsiao HM,Chiu YH

更新日期：2013-01-01 00:00:00

abstract：:Retinal blood vessel detection and analysis play vital roles in early diagnosis and prevention of several diseases, such as hypertension, diabetes, arteriosclerosis, cardiovascular disease and stroke. This paper presents an automated algorithm for retinal blood vessel segmentation. The proposed algorithm takes advanta...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Saleh MD,Eswaran C

更新日期：2012-01-01 00:00:00

abstract：:A two-dimensional time-dependent computational fluid dynamics model of the Circle of Willis has been developed. To simulate, not only the peripheral resistance of the cerebrovascular tree but also its auto-regulation function, a new "active" boundary condition has been defined and developed using control theory to pro...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ferrandez A,David T,Brown MD

更新日期：2002-02-01 00:00:00

abstract：:The goal of this study was to define the effect on hip contact forces of including subject-specific moment generating capacity in the musculoskeletal model by scaling isometric muscle strength and by including geometrical information in control subjects, hip osteoarthritis and total hip arthroplasty patients. Scaling ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Wesseling M,De Groote F,Meyer C,Corten K,Simon JP,Desloovere K,Jonkers I

更新日期：2016-11-01 00:00:00

abstract：:The normalcy index (NI) has been implemented by several studies as a simple index for quantitatively analyzing diffident gait abnormalities, such as children with cerebral palsy and idiopathic toe-walkers. However, whether the NI can be used in anterior cruciate ligament (ACL) deficiency with different types of menisc...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Liu X,Huang H,Ren S,Rong Q,Ao Y

更新日期：2020-11-01 00:00:00

abstract：:The aim of this study was to evaluate the stress distributions and deformations of the temporomandibular joint (TMJ) during different periods before and after sagittal split ramus osteotomy (SSRO). A three-dimensional finite element model of the mandible and TMJ was established, based on the preoperative CT of a patie...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Liu Z,Shu J,Zhang Y,Fan Y

更新日期：2018-08-01 00:00:00

abstract：:In this paper, we introduce a new general method for kinematic analysis of rigid multi body systems subject to holonomic constraints. The method extends the standard analysis of kinematically determinate rigid multi body systems to the over-determinate case. This is accomplished by introducing a constrained optimisati...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Andersen MS,Damsgaard M,Rasmussen J

更新日期：2009-08-01 00:00:00

abstract：:Musculoskeletal finite element analysis (FEA) has been essential to research in orthopaedic biomechanics. The generation of a volumetric mesh is often the most challenging step in a FEA. Hexahedral meshing tools that are based on a multi-block approach rely on the manual placement of building blocks for their mesh gen...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ramme AJ,Shivanna KH,Magnotta VA,Grosland NM

更新日期：2011-10-01 00:00:00