Interaction of microstructure and microcrack growth in cortical bone: a finite element study.

abstract：:Many methods developed for estimating the reliability of protein-protein interactions are based on the topology of protein-protein interaction networks. This paper describes a new reliability measure for protein-protein interactions, which does not rely on the topology of protein interaction networks, but expresses bi...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Park B,Han K

更新日期：2010-02-01 00:00:00

abstract：:Unbalanced contact force on the tibial component has been considered a factor leading to loosening of the implant and increased wear of the bearing surface in total knee arthroplasty. Because it has been reported that good alignment cannot guarantee successful clinical outcomes, the soft tissue balance should be check...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Oh KJ,Park WM,Kim K,Kim YH

更新日期：2014-01-01 00:00:00

abstract：:The magnitude and distribution of bone and muscle mass within limbs affect limb inertial properties, maximum movement speed and the energy required to maintain submaximal movements. Musculoskeletal modeling and movement simulations were used to determine how changes in bone and muscle cross-sectional area (and thus ma...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dellanini L,Hawkins D,Martin B,Stover S

更新日期：2004-06-01 00:00:00

abstract：:The phenotype expression in X-linked adrenoleukodystrophy is one of the most intriguing issues of the disease, because there is no general correlation between the type of ABCD1 gene mutation and the clinical phenotype. In this study, we use the cross-impact analysis to build a descriptively quantitative relationship b...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Yan S,Wu G

更新日期：2010-06-01 00:00:00

abstract：:An appropriate method of application of the hip-joint force and stress analysis of the pelvic bone, in particular the acetabulum, is necessary to investigate the changes in load transfer due to implantation and to calculate the reference stimulus for bone remodelling simulations. The purpose of the study is to develop...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ghosh R,Pal B,Ghosh D,Gupta S

更新日期：2015-01-01 00:00:00

abstract：:In electromagnetic dosimetry, anatomical human models are commonly obtained by segmentation of magnetic resonance imaging or computed tomography scans. In this paper, a human head model extracted from thermal infrared images is examined in terms of its applicability to specific absorption rate (SAR) calculations. Sinc...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Gasmelseed A

更新日期：2011-07-01 00:00:00

abstract：:In this article, we discuss an application of a fictitious domain method to the numerical simulation of the mechanical process induced by press-fitting cementless femoral implants in total hip replacement surgeries. Here, the primary goal is to demonstrate the feasibility of the method and its advantages over competin...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Kallivokas LF,Na SW,Ghattas O,Jaramaz B

更新日期：2012-01-01 00:00:00

abstract：:Blunt and rotational head impacts due to vehicular collisions, falls and contact sports cause relative motion between the brain and skull. This increases the normal and shear stresses in the (skull/brain) interface region consisting of cerebrospinal fluid (CSF) and subarachnoid space (SAS) trabeculae. The relative mot...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Zoghi-Moghadam M,Sadegh AM

更新日期：2009-02-01 00:00:00

abstract：:Functional Alignment is a new method to determine the orientation of a joint's primary rotational axis and the associated movement. It employs three unique concepts. First, data analyses are based upon assessment of spatial positions and not upon movement in a time sequence. Second, analyses are conducted on derived j...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ball KA,Greiner TM

更新日期：2012-01-01 00:00:00

abstract：:It is still unclear how a vertebral fracture should be stabilised and strengthened without endangering the remaining intact bone of the augmented vertebra or the adjacent vertebrae. Numerical modelling may provide insight. To date, however, few finite element (FE) spine models have been developed which are both multi-...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dabirrahmani D,Becker S,Hogg M,Appleyard R,Baroud G,Gillies M

更新日期：2012-01-01 00:00:00

abstract：:Computational models are increasingly being used to investigate the mechanical properties of cardiac tissue. While much insight has been gained from these studies, one important limitation associated with computational modeling arises when using in vivo images of the heart to generate the reference state of the model....

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Nikou A,Dorsey SM,McGarvey JR,Gorman JH 3rd,Burdick JA,Pilla JJ,Gorman RC,Wenk JF

更新日期：2016-12-01 00:00:00

abstract：:Computer models of the human face have the potential to be used as powerful tools in surgery simulation and animation development applications. While existing models accurately represent various anatomical features of the face, the representation of the skin and soft tissues is very simplified. A computer model of the...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Flynn C,Stavness I,Lloyd J,Fels S

更新日期：2015-01-01 00:00:00

abstract：:The current study aimed to evaluate physical training effects. For this purpose, a classifier was implemented by taking into account biomechanical features selected from force-plate measurements and a neurofuzzy algorithm for data management and relevant decision-making. Measurements included two sets of sit-to-stand ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Vannozzi G,Pecoraro F,Caserotti P,Cappozzo A

更新日期：2008-02-01 00:00:00

abstract：:Oscillatory shear stress (OSS), caused by time-varying flow environments, may play a critical role in the production of engineered tissue by bone marrow-derived stem cells. This is particularly relevant in heart valve tissue engineering (HVTE), owing to the intense haemodynamic environments that surround native valves...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Salinas M,Schmidt DE,Libera M,Lange RR,Ramaswamy S

更新日期：2014-05-01 00:00:00

abstract：:This paper is motivated by recent experimental research (Tang-Schomer et al. 2012) on the formation of periodic varicosities in axons after traumatic brain injury (TBI). TBI leads to the formation of undulated distortions in the axons due to their dynamic deformation. These distortions result in the breakage of some m...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Kuznetsov IA,Kuznetsov AV

更新日期：2015-01-01 00:00:00

abstract：:Modeling tumor growth in biological systems is a challenging problem with important consequences for diagnosis and treatment of various forms of cancer. This growth process requires large simulation complexity due to evolving biological and chemical processes in living tissue and interactions of cellular and vascular ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Puzyrev V,Łoś M,Gurgul G,Calo V,Dzwinel W,Paszyński M

更新日期：2019-12-01 00:00:00

abstract：:Oral cancer surgery has a negative influence on the quality of life (QOL). As a result of the complex physiology involved in oral functions, estimation of surgical effects on functionality remains difficult. We present a user-friendly biomechanical simulation of tongue surgery, including closure with suturing and scar...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Kappert KDR,van Alphen MJA,van Dijk S,Smeele LE,Balm AJM,van der Heijden F

更新日期：2019-06-01 00:00:00

abstract：:In this article, the problem of laminar, isothermal, incompressible and viscous flow in a rectangular domain bounded by two moving porous walls, which enable the fluid to enter or exit during successive expansions or contractions, is investigated. The governing non-linear equations and their associated boundary condit...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Dinarvand S

更新日期：2011-10-01 00:00:00

abstract：:Work-related musculoskeletal disorders (WMSDs) have become increasingly common among dentists and initiate a series of events that could result in a career ending. This study aims to construct a system for predicting and preventing WMSD among dentists. We used Bayesian network (BN) that describes the mutual relationsh...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Thanathornwong B,Suebnukarn S,Songpaisan Y,Ouivirach K

更新日期：2014-01-01 00:00:00

abstract：:The objective of this investigation was to develop probabilistic finite element (FE) models of the anterior longitudinal ligament (ALL) and posterior longitudinal ligament (PLL) of the cervical spine that incorporate the natural variability of biological specimens. In addition to the model development, a rigorous vali...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Francis WL,Eliason TD,Thacker BH,Paskoff GR,Shender BS,Nicolella DP

更新日期：2014-01-01 00:00:00

abstract：:This paper analyses the mechanical behaviour of a new reinforced anatomical post-systems (RAPS) for endodontic restoration. The composite restorative material (CRM) completely fills the root canal (as do the commonly used cast metal posts) and multiple prefabricated composite posts (PCPs) are employed as reinforcement...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Maceri F,Martignoni M,Vairo G

更新日期：2009-02-01 00:00:00

abstract：:The aim of this study was to measure the cardiac output and stroke volume for a healthy subject by coupling an echocardiogram Doppler (echo-Doppler) method with a fluid-structure interaction (FSI) simulation at rest and during exercise. Blood flow through aortic valve was measured by Doppler flow echocardiography. Aor...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Bahraseman HG,Hassani K,Navidbakhsh M,Espino DM,Sani ZA,Fatouraee N

更新日期：2014-01-01 00:00:00

abstract：:Musculoskeletal research questions regarding the prevention or rehabilitation of the hand can be addressed using inverse dynamics simulations when experiments are not possible. To date, no complete human hand model implemented in a holistic human body model has been fully developed. The aim of this work was to develop...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Engelhardt L,Melzner M,Havelkova L,Fiala P,Christen P,Dendorfer S,Simon U

更新日期：2020-12-10 00:00:00

abstract：:Adolescent Idiopathic Scoliosis (AIS) is a 3D spinal deformity characterized by curvature and rotation of the spine. Markerless surface topography (ST) analysis has been proposed for diagnosing and monitoring AIS to reduce the X-ray radiation exposure to patients. This method captures scans of the cosmetic deformity o...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Ghaneei M,Ekyalimpa R,Westover L,Parent EC,Adeeb S

更新日期：2019-05-01 00:00:00

abstract：:In this study, we developed an approach for prosthetic foot design incorporating motion analysis, mechanical testing and computer analysis. Using computer modeling and finite element analysis, a three-dimensional (3D), numerical foot model of the solid ankle cushioned heel (SACH) foot was constructed and analyzed base...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Saunders MM,Schwentker EP,Kay DB,Bennett G,Jacobs CR,Verstraete MC,Njus GO

更新日期：2003-02-01 00:00:00

abstract：:Being seated for long periods, while part of many leisure or occupational activities, can lead to discomfort, pain and sometimes health issues. The impact of prolonged sitting on the body has been widely studied in the literature, with a large number of human-body finite element models developed to simulate sitting an...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Savonnet L,Wang X,Duprey S

更新日期：2018-03-01 00:00:00

abstract：:The human jaw's structure-function relationships are complex. A recent example of this complexity is the lateral pterygoid muscle which we now consider as a single unit made up of functional regions with activity in each dependent on the biomechanical demands of the task. We have also characterised the effects on the ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Peck CC,Wirianski A,Murray GM

更新日期：2010-08-01 00:00:00

abstract：:Cell migration relies on traction forces in order to propel a cell. Several computational models have been developed that help explain the trajectory that cells take during migration, but little attention has been placed on traction forces during this process. Here, we investigated the spatiotemporal dynamics of cell ...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Han SJ,Sniadecki NJ

更新日期：2011-05-01 00:00:00

abstract：:The labrum contributes to passive glenohumeral joint stability. Cadaveric studies have demonstrated that this has position and load dependency, which has not been quantified under physiological loads. This study aims to validate subject-specific finite element (FE) models against in vitro measurements of joint stabili...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Klemt C,Nolte D,Grigoriadis G,Di Federico E,Reilly P,Bull AMJ

更新日期：2017-11-01 00:00:00

abstract：:The clinical importance of measuring local pulse wave velocity (PWV), has encouraged researchers to develop several local methods to estimate it. In this work, we proposed a new method, the sum-of-squares method [Formula: see text], that allows the estimations of PWV by using simultaneous measurements of blood pressur...

journal_title：Computer methods in biomechanics and biomedical engineering

authors： Abdessalem KB,Flaud P,Zobaidi S

更新日期：2018-01-01 00:00:00