Abstract：
:Calcium polyphosphate is a biodegradable bone substitute. It remains a challenge to prepare porous calcium polyphosphate with desired gradient porous structures. In this study, a modified one-step gravity sintering method was used to prepare calcium polyphosphate scaffolds with desired-gradient-pore-size distribution. The differences of porous structure, mechanical strength, and degradation rate between gradient and homogenous calcium polyphosphate scaffolds were evaluated by micro-computed tomography, scanning electron microscopy, and mechanical testing. Preosteoblastic MC3T3-E1 cells were seeded onto gradient and homogenous calcium polyphosphate scaffolds and cultured in a flow perfusion bioreactor. The distribution, proliferation, and differentiation of the MC3T3-E1 cells were compared to that of homogenous calcium polyphosphate scaffolds. Though no significant difference of cell proliferation was found between the gradient and the homogenous calcium polyphosphate scaffolds, a much higher cell differentiation and mineralization were observed in the gradient calcium polyphosphate scaffolds than that of the homogenous calcium polyphosphate scaffolds, as manifested by increased alkaline phosphatase activity (p < 0.05). The improved distribution and differentiation of cultured cells within gradient scaffolds were further supported by both (18)F-fluorine micro-positron emission tomography scanning and in vitro tetracycline labeling. We conclude that the calcium polyphosphate scaffold with gradient pore sizes enhances osteogenic cell differentiation as well as mineralization. The in vivo performance of gradient calcium polyphosphate scaffolds warrants further investigation in animal bone defect models.
journal_name
J Biomater Appljournal_title
Journal of biomaterials applicationsauthors
Chen L,Song W,Markel DC,Shi T,Muzik O,Matthew H,Ren Wdoi
10.1177/0885328215608335subject
Has Abstractpub_date
2016-02-01 00:00:00pages
908-18issue
7eissn
0885-3282issn
1530-8022pii
0885328215608335journal_volume
30pub_type
杂志文章abstract：:The controlled release of insulin from a series of biodegradable hybrid hydrogel network containing dextran derivative of allyl isocyanate (dex-AI) and poly (D,L) lactide diacrylate macromer (PDLLAM) over a wide range of composition ratio was investigated. Laser confocal scanning microscope was used to understand the ...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1106/088532802024248
更新日期：2002-04-01 00:00:00
abstract：:A series of cellulose/soy protein isolate (SPI) sponges was prepared using a freeze-drying process. The effect of the SPI content on the structure of the sponges was characterized by Fourier transform infrared spectrometry (FT-IR), X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM). It showed that...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328208099337
更新日期：2010-02-01 00:00:00
abstract：:This study reports the properties of tableted microparticles based on high-amylose corn starch (HACS)-pectin blend polymers as the controlled release system for diclofenac sodium (DS). HACS-pectin blend microparticles are prepared through a modified process by the spray drying technique, which is a widely used microen...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328206056771
更新日期：2007-01-01 00:00:00
abstract：:Dicalcium phosphate dihydrate particles functionalized with triethyleneglycol dimethacrylate were synthesized and added to a photocurable mixture of bisphenol-A glycidyl dimethacrylate and triethyleneglycol dimethacrylate with the purpose of developing a resin composite capable of releasing calcium and phosphate ions ...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328216680116
更新日期：2017-01-01 00:00:00
abstract：:In this work, gold embedded chitosan nanoparticles (Au@CS NPs) were fabricated by a one-pot method. The benzaldehyde-terminated poly[(2-methacryloyloxy) ethyl phosphorylcholine] (PMPC) was applied to modification of the gold doped chitosan nanoparticles. The obtained Au@CS-PMPC NPs had the diameter of 135 nm with a na...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328220952594
更新日期：2020-08-27 00:00:00
abstract：:The manufacture of a polyester vascular prosthesis in the southern hemisphere is a new development in the global dissemination of this maturing technology. Hence the recent introduction of the Barone Microvelour arterial graft from Argentina has highlighted the need for a comparative in vitro and in vivo study to comp...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/088532828800300302
更新日期：1989-01-01 00:00:00
abstract：:The aim of this study was to examine the release of silica (Si), calcium (Ca), phosphorous (P), and fluoride (F) from conventional glass ionomer cement (GI) and resin-modified glass ionomer cement (LCGI), containing different quantities of bioactive glass (BAG). Further aim was to evaluate in vitro biomineralization o...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0085328204044538
更新日期：2004-07-01 00:00:00
abstract：:This study's aim consists of evaluating the adhesion and proliferation of mesenchymal stem cells (MSCs) derived from rat bone marrow on nanoparticle Titanium (Ti) surface. Hence, passage 3 MSCs were, respectively, seeded on nanoparticle Ti and pure Ti surfaces and then cultured for 32 h. Cell morphology and viability ...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328211414750
更新日期：2013-01-01 00:00:00
abstract：:Mesh implants are frequently used in congenital diaphragmatic hernia. This experimental study aimed to examine the influence of different materials on the diaphragmatic movement over time as well as their mechanical qualities after 4 months. Ultrapro®, Surgisis®, and Proceed® were implanted onto a diaphragmatic defect...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328209360423
更新日期：2011-05-01 00:00:00
abstract：:Polysulfone (PSU) composite films filled with Beta-dicalcium silicate (Beta-Ca(2)SiO(4)) particles are prepared by the solvent casting-evaporation method. The surface morphologies and mechanical properties of the films are determined. The bioactivity of the composite films is evaluated by soaking them in simulated bod...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328206054712
更新日期：2006-04-01 00:00:00
abstract：:The purpose of this investigation is to study the effect of long-term subcutaneous aluminum polymeric implants on aluminum release and accumulation in various tissues in rats. The implants were formulated using silicone rubber and polyurethane polymers and three different aluminum salts. The polymeric matrices were ev...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/088532829601100103
更新日期：1996-07-01 00:00:00
abstract：:The purpose of this study is the development of a nerve electrode that reorganizes nerve geometry slowly and controllably. The Flat Interface Nerve Electrode (FINE) can reshape the nerve into an elongated oval and provide selective stimulation. However, the rate of closure of this electrode is difficult to control. Th...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328208097426
更新日期：2009-09-01 00:00:00
abstract：:This study aims the in vivo biological characterization of an innovative minocycline delivery system, based on polymethylmethacrylate bone cement. Bone cements containing 1% or 2.5% (w/w) minocycline were formulated and evaluated through solid-state characterization. Biological evaluation was conducted in vivo, within...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328218795290
更新日期：2018-09-01 00:00:00
abstract：:Polymer biocomposites based on segmented poly(ester urethane) and extracellular matrix components have been prepared for the development of tissue engineering applications with improved biological characteristics of the materials in contact with blood and tissues for long periods. Thermal, dynamical, and dielectrical ...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328210394468
更新日期：2012-08-01 00:00:00
abstract：:Tendon tears are a relevant concern for today's national health systems because of their social impact and high recurrence rate. The current gold standard for fixing tendon tears is surgical repair; however, this strategy is not able to fully re-establish tendon integrity and functionality. Tissue engineering approach...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328218779846
更新日期：2018-07-01 00:00:00
abstract：:Polylactic acid (PLA)-derived polymers are widely used in many biotechnological fields, thanks to their biocompatibility and resorbability through natural pathways. Moreover, PLA is one of the few polymers in which both the properties and the stereochemical structure can be easily modified, making possible a specific ...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328211398298
更新日期：2012-08-01 00:00:00
abstract：:The animal immune response against Galα1,3-Galβ1-4GlcNAc-R(α-Gal) epitopes gives an important cause for the failure of glutaraldehyde(GA)-fixed cardiac xenografts. This study aimed to assess the in vivo effect of our novel combined anticalcification treatment, which includes immunologic modification, using α1,3-galact...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328214552710
更新日期：2015-02-01 00:00:00
abstract：:The quality and quantity of bone are crucial to the success of dental implant treatment. Recently, bone grafting materials have reached some limitations. This study aimed to evaluate the biocompatibility of novel drug delivery material, injectable methacrylated hyaluronic acid hydrogel incorporated with different rati...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328220971746
更新日期：2020-11-04 00:00:00
abstract：:The development of an effective wound dressing with the ability to induce skin wound healing is a great challenge in medicine. Nanofibers are highly attractive for wound dressing preparation due to their properties such as hemostasis induction, good absorption of wound exudates, and facilitation of cell growth. Chitos...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328217739562
更新日期：2018-01-01 00:00:00
abstract：:Functionalization of a porous orthopedic implant with dexamethasone, a widely used anti-inflammatory drug, encapsulated within a biodegradable polymer for controlled release could help reduce or eliminate the inflammation response by the local tissue. In this research, we investigated the possibility of using supercri...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328209354365
更新日期：2011-01-01 00:00:00
abstract：:Eight different chemicals were investigated as potential candidate coupling agents for phosphate glass fibre reinforced polylactic acid composites. Evidence of reaction of the coupling agents with phosphate glass and their effect on surface wettability and glass degradation were studied along with their principle role...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328212453634
更新日期：2013-09-01 00:00:00
abstract：:The production of large quantities of functional vascularized bone tissue ex vivo still represent an unmet clinical challenge. Microcarriers offer a potential solution to scalable manufacture of bone tissue due to their high surface area-to-volume ratio and the capacity to be assembled using a modular approach. Microc...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328217720812
更新日期：2017-09-01 00:00:00
abstract：:In the present study, a novel hydrogel-grafted fabrics embedding of berberine nanosuspension was developed for the treatment of infected wound. Hydrogel-grafted fabric was prepared by graft copolymerization of N-isopropylacrylamide and alginate using ceric ammonium nitrate as initiator. Berberine nanosuspension was pr...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328213509503
更新日期：2014-05-01 00:00:00
abstract：:Aluminum-free glass ionomer cements (GICs) are under development for orthopedic applications, but are limited by their insufficient handling properties. Here, the addition of calcium polyphosphate (CPP) was investigated as an additive to an experimental zinc-silicate glass ionomer cement. A 50% maximum increase in wor...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328215568985
更新日期：2015-07-01 00:00:00
abstract：:Chitosan-glutaraldehyde microparticles were produced by emulsion crosslinking method to be used as drug delivery system for polyphenols from Thymus serpyllum L. aqueous extract. The effect of preparation conditions, chitosan concentration (1.5-3% w/v), and glutaraldehyde/chitosan (GA/Ch) mass ratio (0.15-1.20) on wate...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328215598940
更新日期：2015-11-01 00:00:00
abstract：:L-Tyrosine polyurethanes (LTUs) have been synthesized by structural modification of the poly (amino acid) backbone to circumvent the problems associated with the processing of poly (amino acids) arising from their high crystallinity, insolubility in common organic solvents, and high glass-transition and melting temper...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328211432325
更新日期：2013-05-01 00:00:00
abstract：:Adhesions commonly occur after internal disease or surgery. The natural healing response leads to the formation of vascular and avascular adhesions after inflammatory diseases and surgical interventions. A barrier film could be incorporated during surgery between layers of tissues that must not adhere to one another. ...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/088532829601100203
更新日期：1996-10-01 00:00:00
abstract：:To develop biocompatible composite microspheres for novel hemostatic use, we designed and prepared a novel biomaterial, composite microspheres consisting of carboxymethyl chitosan, sodium alginate, and collagen (CSCM). The ultra-structure of CSCM was investigated by scanning electron microscopy assay. In hemostatic fu...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328215618354
更新日期：2016-02-01 00:00:00
abstract：:Nowadays, exceptional advantages of silk fibroin over synthetic and natural polymers have impelled the scientists to application of this biomaterial for tissue engineering purposes. Recently, we showed that embedding natural degummed silk fibers in regenerated Bombyx mori silk-based scaffold significantly increases th...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328215601925
更新日期：2016-01-01 00:00:00
abstract：:The aim of the in vitro study was a comparison of an allogenic (ABSM) and a xenogenic bone substitute material (XBSM) with and without injectable platelet-rich fibrin (ABSM-i-PRF & XBSM-i-PRF) on cell characteristics of human osteoblasts (HOB). Here, ABSM and XBSM (+ i-PRF = test; - i-PRF = control) were incubated wit...
journal_title：Journal of biomaterials applications
pub_type： 杂志文章
doi：10.1177/0885328220914407
更新日期：2020-07-01 00:00:00
