Properties of tableted high-amylose corn starch-pectin blend microparticles intended for controlled delivery of diclofenac sodium.

abstract：:We assess the effects of chemical processing, ethylene oxide sterilization, and threading on bone surface and mechanical properties of bovine undecalcified bone screws. In addition, we evaluate the possibility of manufacturing bone screws with predefined dimensions. Scanning electronic microscopic images show that che...

journal_title：Journal of biomaterials applications

authors： Haje DP,Volpon JB,Moro CA

更新日期：2009-03-01 00:00:00

abstract：:Cellulose acetate phthalate and Pluronic F-127 combined together (70:30 wt:wt) create a rigid, surface-eroding association polymer. To impart flexibility into the polymer system and allow for a drug delivery film that can contour to varying wound shapes, plasticizers were added. Triethyl citrate or tributyl citrate wa...

journal_title：Journal of biomaterials applications

authors： Rabek CL,Van Stelle R,Dziubla TD,Puleo DA

更新日期：2014-01-01 00:00:00

abstract：:In this study, a novel bilayer scaffold composed of electrospun polycaprolactone and poly(lacto-co-glycolic acid) (PCL/PLGA) membrane and glutaraldehyde (3.5% v/v) cross-linked chitosan/gelatin hydrogel was fabricated using two methods: electrospinning of the membrane onto the lyophilized hydrogel (BS-1) and membrane ...

journal_title：Journal of biomaterials applications

authors： Franco RA,Min YK,Yang HM,Lee BT

更新日期：2013-01-01 00:00:00

abstract：:The carcinogenic potential of asbestos has led to the development of non-asbestos materials for use as casting ring liners. Cellulose paper are replacing asbestos paper. The brass die and crown were made to produce full crowns. The standardized wax pattern was replicated twenty-nine times. Two grooves were marked on t...

journal_title：Journal of biomaterials applications

authors： Keyf F,Erman G

更新日期：2000-04-01 00:00:00

abstract：:Antenna coupling microwave plasma enables a highly oxidative treatment of the outmost surface of polypropylene (PP) nonwoven fabric within a short time period. Subsequently, grafting copolymerization with acrylic acid (AAc) makes the plasma-treated fabric durably hydrophilic and excellent in water absorbency. With hig...

journal_title：Journal of biomaterials applications

authors： Tyan YC,Liao JD,Wu YT,Klauser R

更新日期：2002-10-01 00:00:00

abstract：:Silicate-based cements have been developed as a class of bioactive and biodegradable bone cements owing to their good in vitro bioactivity and ability to dissolve in a simulated body fluid. Until recently, however, the in vivo evidence of their ability to support bone regeneration is still scarce. In the present study...

journal_title：Journal of biomaterials applications

authors： Ma B,Huan Z,Xu C,Ma N,Zhu H,Zhong J,Chang J

更新日期：2017-08-01 00:00:00

abstract：:Bone tissue engineering, which relies on the interactions between stem cells and suitable scaffold materials, represents a highly desirable alternative to currently used allograft or autograft strategies for the treatment of bone defects caused by injury or disease, with one of the major challenges being to generate s...

journal_title：Journal of biomaterials applications

authors： Feng J,Chong M,Chan J,Zhang Z,Teoh SH,Thian ES

更新日期：2014-07-01 00:00:00

abstract：:Compounds of a silicone elastomer suitable for preparing maxillofacial prostheses, reinforced with various amounts of silica powder, have been studied for their mechanical response and wetting properties in terms of contact angle. Tensile strength and elongation at break showed an increase with increasing silica volum...

journal_title：Journal of biomaterials applications

authors： Andreopoulos AG,Evangelatou M,Tarantili PA

更新日期：1998-07-01 00:00:00

abstract：:Fracture resistance of provisional restorations is an important clinical concern. This property is directly related to transverse strength. Strengthening of provisional fixed partial dentures may result from reinforcement with various fiber types. This study evaluated the effect of fiber type and water storage on the ...

journal_title：Journal of biomaterials applications

authors： Uzun G,Keyf F

更新日期：2003-04-01 00:00:00

abstract：:The objective of the present study was to incorporate strontium into calcium phosphate cement combined with a lower single-dose local administration of bone morphogenetic protein-2 to enhance its in vivo biodegradation and bone tissue growth. After the creation of a rodent critical-sized femoral metaphyseal bone defec...

journal_title：Journal of biomaterials applications

authors： Tao Z,Zhou W,Jiang Y,Wu X,Xu Z,Yang M,Xie J

更新日期：2018-07-01 00:00:00

abstract：:In order to find hemodynamic parameters that can accurately predict whether patients can be successfully weaned from ventricular assist devices (VADs), we studied data from 17 patients supported with Pierce-Donachy VADs [11 left VAD (LVAD); 6 right VAD (RVAD)] following cardiogenic shock for periods from 1.3 to 22 day...

journal_title：Journal of biomaterials applications

authors： Termuhlen DF,Swartz MT,Ruzevich SA,Reedy JE,Pennington DG

更新日期：1990-04-01 00:00:00

abstract：:In this work, the role of shock wave-induced increase of bone morphogenetic proteins in modulating the osteogenic properties of osteoblast-like cells seeded on a bioactive scaffold was investigated using gremlin as a bone morphogenetic protein antagonist. Bone-like glass-ceramic scaffolds, based on a silicate experime...

journal_title：Journal of biomaterials applications

authors： Muzio G,Martinasso G,Baino F,Frairia R,Vitale-Brovarone C,Canuto RA

更新日期：2014-11-01 00:00:00

abstract：:Novel in situ polymerizable liquid three-arm biodegradable oligomeric polyesters based upon glycolic acid (GA), L-lactic acid (LLA), and their copolymers are synthesized and characterized. Injectable and in situ curable polymer neat resins and their composites formulated with bioabsorbable beta-tricalcium phosphate ar...

journal_title：Journal of biomaterials applications

authors： Xie D,Park JG,Zhao J,Turner CH

更新日期：2007-07-01 00:00:00

abstract：:The synthesis, tensile strength, thermostability and hydrophilicity of the poly(urethaneamideimide) and the poly(urethaneureas) with N-aliphatic side chains are presented. These elastomers were compared in blood compatibility with determination of the common indices and with immunologic tests of the beta-thromboglobul...

journal_title：Journal of biomaterials applications

authors： Calusinski G,Masiulanis B,Jurkowski P

更新日期：2000-10-01 00:00:00

abstract：:Staphylococcus epidermidis plays a major role in capsular contractures of silicone breast implants. This in vitro study evaluates the antibacterial effect of copper on S. epidermidis in silicone implants. Specimens of a silicone material used for breast augmentation (Cu0) and specimens coated with different copper con...

journal_title：Journal of biomaterials applications

authors： Gosau M,Bürgers R,Vollkommer T,Holzmann T,Prantl L

更新日期：2013-08-01 00:00:00

abstract：:Hydrogels were prepared from 2-hydroxyethyl methacrylate and ethylene glycol dimethacrylate as cross-linking agent. Two different polymerization techniques were followed, namely bulk polymerization initiated by dibenzoyl peroxide and solution polymerization, in water, using a redox initiator system. Differences in the...

journal_title：Journal of biomaterials applications

authors： Andreopoulos AG,Plytaria M

更新日期：1998-04-01 00:00:00

abstract：:An experimental and computational investigation of the self-tapping ability of carbon fibre reinforced polyetheretherketone (CFR-PEEK) has been conducted. Six CFR-PEEK suture anchor designs were investigated using PEEK-OPTIMA® Reinforced, a medical grade of CFR-PEEK. Experimental tests were conducted to investigate th...

journal_title：Journal of biomaterials applications

authors： Feerick EM,Wilson J,Jarman-Smith M,Ó'Brádaigh CM,McGarry JP

更新日期：2014-10-01 00:00:00

abstract：:Biomaterials and devices have been used in a variety of applications ranging from disposable extracorporeal devices and soft and hard tissue augmentation, to total artificial internal organs. However, there are risks and failures in each application which are a result of undesirable biological interactions. This artic...

journal_title：Journal of biomaterials applications

authors： Jayabalan M

更新日期：1993-07-01 00:00:00

abstract：:Single nanofibers with chemical and functional properties consistent with artery extracellular matrix nanofibers were produced by electrospinning. Using weight ratios to mimic artery extracellular matrix, five materials were tested: (1) Collagen type I, (2) Collagen type I + Collagen type III, (3) Collagen type I + po...

journal_title：Journal of biomaterials applications

authors： Liu J,Argenta L,Morykwas M,Wagner WD

更新日期：2014-01-01 00:00:00

abstract：:In this work, we report brushite-based calcium phosphate cement (CPC) system to enhance the in vivo biodegradation and tissue in-growth by incorporation of micro-channeled hydroxyapatite (HAp) granule and silicon and sodium addition in calcium phosphate precursor powder. Sodium- and silicon-rich calcium phosphate powd...

journal_title：Journal of biomaterials applications

authors： Sarkar SK,Lee BY,Padalhin AR,Sarker A,Carpena N,Kim B,Paul K,Choi HJ,Bae SH,Lee BT

更新日期：2016-01-01 00:00:00

abstract：:Gold nanomaterials possess unique physical and chemical properties, which attracted much attention in recent years. As a new type of gold nanomaterials, gold nanostars (GNSTs) have been prepared and characterized in this study. GNSTs under near-infrared (NIR) light irradiation can exert not only cancer photothermal th...

journal_title：Journal of biomaterials applications

authors： Wang L,Meng D,Hao Y,Zhao Y,Li D,Zhang B,Zhang Y,Zhang Z

更新日期：2015-11-01 00:00:00

abstract：:The aim of this study was to examine the release of silica (Si), calcium (Ca), phosphorous (P), and fluoride (F) from conventional glass ionomer cement (GI) and resin-modified glass ionomer cement (LCGI), containing different quantities of bioactive glass (BAG). Further aim was to evaluate in vitro biomineralization o...

journal_title：Journal of biomaterials applications

authors： Yli-Urpo H,Vallittu PK,Närhi TO,Forsback AP,Väkiparta M

更新日期：2004-07-01 00:00:00

abstract：:The aim of this study was to design a new natural/synthetic bioactive bone scaffold for potential use in bone replacement applications. We developed a tri-component osteogenic composite scaffold made of collagen (Coll), hydroxyapatite (HA) and poly(l-lactide-co-ε-caprolactone) (PLCL). This Coll/HA/PLCL composite scaff...

journal_title：Journal of biomaterials applications

authors： Akkouch A,Zhang Z,Rouabhia M

更新日期：2014-02-01 00:00:00

abstract：:Transarterial embolization is an established minimally invasive treatment for solid tumors. Unintended inflammation, foreign body reactions and ischemia-triggered neoangiogenesis are clinical drawbacks of permanent embolic materials. The aim of the current study was to characterize a new type of biodegradable starch m...

journal_title：Journal of biomaterials applications

authors： Sommer CM,Do TD,Schlett CL,Flechsig P,Gockner TL,Kuthning A,Vollherbst DF,Pereira PL,Kauczor HU,Macher-Göppinger S

更新日期：2018-02-01 00:00:00

abstract：:Type 1 diabetes mellitus is a serious disease comprising approximately 10% of all diabetes cases, and the global incidence of type 1 diabetes mellitus is steadily rising without any promise of a cure in the near future. Although islet transplantation has proven to be an effective means of treating type 1 diabetes mell...

journal_title：Journal of biomaterials applications

authors： Xu L,Guo Y,Huang Y,Xu Y,Lu Y,Wang Z

更新日期：2019-04-01 00:00:00

abstract：:NiTi alloy is used as a biomaterial due to its pseudoelastic behaviour. It exhibits a great potential in dental and orthopedic applications where constant correcting loads are required. In order to use such materials, it is necessary to investigate the effect of the cyclic straining upon the transformation stresses an...

journal_title：Journal of biomaterials applications

authors： Gil FJ,Planell JA

更新日期：1998-01-01 00:00:00

abstract：:Melt electrowriting (MEW) can print high-resolution scaffolds with the ultrafine fibers from 800 nm to 20 µm. However, the cell seeding efficiency relatively low due to the large pore size of the MEW scaffold. Here, we reported a method to solve this dilemma by electrospinning a gelatin methacrylate (GelMA) hydrogel f...

journal_title：Journal of biomaterials applications

authors： Ye W,Xie C,Liu Y,He Y,Gao Q,Ouyang A

更新日期：2021-01-01 00:00:00

abstract：:Magnesium-based alloys exhibit biodegradable, biocompatible and excellent mechanical properties which enable them to serve as ideal candidate biomedical materials. In particular, their biodegradable ability helps patients to avoid a second surgery. The corrosion rate, however, is too rapid to sustain the healing proce...

journal_title：Journal of biomaterials applications

authors： Chen Y,Dou J,Yu H,Chen C

更新日期：2019-05-01 00:00:00

abstract：:The development and improvement of medical devices and artificial organs is critically dependent on the realisation of the importance of the interactions between materials and body tissues. In this regard, the evaluation of biocompatibility assumes paramount importance. This paper reviews the hematological aspects of ...

journal_title：Journal of biomaterials applications

authors： Banerjee R,Nageswari K,Puniyani RR

更新日期：1997-07-01 00:00:00

abstract：:Poor blood circulation makes it difficult for antitubercular drugs to achieve effective bactericidal concentration at tuberculose focus. The residual Mycobacterium tuberculosis around surgical wound would multiply, resulting in nonunion or sinus formation. Carbon nanotubes have strong tissue penetration and can cross ...

journal_title：Journal of biomaterials applications

authors： Chen G,Wu Y,Yu D,Li R,Luo W,Ma G,Zhang C

更新日期：2019-02-01 00:00:00