Neural priming of adipose-derived stem cells by cell-imprinted substrates.

abstract：:Laser-assisted bioprinting (LaBP) allows the realization of computer-generated 3D tissue grafts consisting of cells embedded in a hydrogel environment. In this study, human adipose-derived stem cells (hASCs) were printed in a free-scalable 3D grid pattern by means of LaBP. We demonstrate that neither the proliferation...

journal_title：Biofabrication

authors： Gruene M,Pflaum M,Deiwick A,Koch L,Schlie S,Unger C,Wilhelmi M,Haverich A,Chichkov BN

更新日期：2011-03-01 00:00:00

abstract：:Four-dimensional (4D) bioprinting, encompassing a wide range of disciplines including bioengineering, materials science, chemistry, and computer sciences, is emerging as the next-generation biofabrication technology. By utilizing stimuli-responsive materials and advanced three-dimensional (3D) bioprinting strategies, ...

journal_title：Biofabrication

authors： Li YC,Zhang YS,Akpek A,Shin SR,Khademhosseini A

更新日期：2016-12-02 00:00:00

abstract：:We have developed cell sheet technology as a modern method for the fabrication of functional tissue-like and organ-like structures. This technology allows for a sheet of interconnected cells and cells in full contact with their natural extracellular environment to be obtained. A cell sheet can be patterned and compose...

journal_title：Biofabrication

authors： Hannachi IE,Yamato M,Okano T

更新日期：2009-06-01 00:00:00

abstract：:Degeneration of the intervertebral disc (IVD) represents a significant musculoskeletal disease burden. Tissue engineering has proposed several strategies comprising the use of biodegradable materials to prepare scaffolds that can present mechanical properties similar to those of native IVD tissues. However, this might...

journal_title：Biofabrication

authors： van Uden S,Silva-Correia J,Correlo VM,Oliveira JM,Reis RL

更新日期：2015-01-21 00:00:00

abstract：:In conventional primary cultures, cardiac cells prepared from a newborn rat undergo spontaneous formation of cell clusters after several days. These cell clusters may be non-homogeneously distributed on a flat surface and show irregular beating which can be recorded by calcium ion imaging. In order to improve the cell...

journal_title：Biofabrication

authors： Wang L,Liu L,Magome N,Agladze K,Chen Y

更新日期：2013-09-01 00:00:00

abstract：:Cell mechanical microenvironment (CMM) significantly affects cell behaviors such as spreading, migration, proliferation and differentiation. However, most studies on cell response to mechanical stimulation are based on two-dimensional (2D) planar substrates, which cannot mimic native three-dimensional (3D) CMM. Accumu...

journal_title：Biofabrication

authors： Huang G,Wang L,Wang S,Han Y,Wu J,Zhang Q,Xu F,Lu TJ

更新日期：2012-12-01 00:00:00

abstract：:Current technologies for manufacturing of microfluidic devices include soft-lithography, wet and dry etching, thermoforming, micro-machining and three-dimensional (3D) printing. Among them, soft-lithography has been the mostly preferred one in medical and pharmaceutical fields due to its ability to generate polydimeth...

journal_title：Biofabrication

authors： Ozbolat V,Dey M,Ayan B,Ozbolat IT

更新日期：2019-04-16 00:00:00

abstract：:A bio-inspired hydrogel for 3D bioprinting of soft free-standing neural tissues is presented. The novel filler-free bioinks were designed by combining natural polymers for extracellular matrix biomimicry with synthetic polymers to endow desirable rheological properties for 3D bioprinting. Crosslinking of thiolated Plu...

journal_title：Biofabrication

authors： Haring AP,Thompson EG,Tong Y,Laheri S,Cesewski E,Sontheimer H,Johnson BN

更新日期：2019-02-25 00:00:00

abstract：:Tissue engineering needs innovative solutions to better fit the requirements of a minimally invasive approach, providing at the same time instructive cues to cells. The use of shape memory polyurethane has been investigated by producing 4D scaffolds via additive manufacturing technology. Scaffolds with two different p...

journal_title：Biofabrication

authors： Hendrikson WJ,Rouwkema J,Clementi F,van Blitterswijk CA,Farè S,Moroni L

更新日期：2017-08-02 00:00:00

abstract：:The precise positioning and arrangement of cell spheroids and organoids are critical to reconstructing complex tissue architecture for tissue engineering and regenerative medicine. Here, we present a digital acoustofluidic method to manipulate cell spheroids and organoids with unprecedented dexterity. By introducing l...

journal_title：Biofabrication

authors： Cai H,Wu Z,Ao Z,Nunez A,Chen B,Jiang L,Bondesson M,Guo F

更新日期：2020-07-01 00:00:00

abstract：:Drop-on-demand (DoD) inkjet printing has been explored for a range of applications, including those to selectively deposit cellular material, due to the high accuracy and scalability of such systems when compared with alternative bioprinting techniques. Despite this, there remain considerable limitations when handling...

journal_title：Biofabrication

authors： Dudman JPR,Ferreira AM,Gentile P,Wang X,Ribeiro RDC,Benning M,Dalgarno KW

更新日期：2020-08-12 00:00:00

abstract：:Engineering surfaces with functional polymers is a crucial issue in the field of micro/nanofabrication and cell-material interface studies. For many applications of surface patterning, it does not need cells to attach on the whole surface. Herein, we introduce a novel polymer fabrication protocol of off-stoichiometry ...

journal_title：Biofabrication

authors： Liu W,Li Y,Ding X

更新日期：2017-04-24 00:00:00

abstract：:A critical consideration in tissue engineering is to recapitulate the microstructural organization of native tissues that is essential to their function. Scaffold-based techniques have focused on achieving this via the contact guidance principle wherein topographical cues offered by scaffold fibers direct migration an...

journal_title：Biofabrication

authors： Chansoria P,Narayanan LK,Schuchard K,Shirwaiker R

更新日期：2019-04-26 00:00:00

abstract：:Native small intestine possesses distinct multi-scale structures (e.g., crypts, villi) not included in traditional 2D intestinal culture models for drug delivery and regenerative medicine. The known impact of structure on cell function motivates exploration of the influence of intestinal topography on the phenotype of...

journal_title：Biofabrication

authors： Koppes AN,Kamath M,Pfluger CA,Burkey DD,Dokmeci M,Wang L,Carrier RL

更新日期：2016-08-22 00:00:00

abstract：:Four-dimensional (4D) bioprinting of cell-laden constructs with programmable shape-morphing structures has gained increasing attention in the field of biofabrication and tissue engineering. Currently, most of the widely used materials for 4D printing, including N-isopropylacrylamide-based polymers, are not commonly us...

journal_title：Biofabrication

authors： Luo Y,Lin X,Chen B,Wei X

更新日期：2019-09-13 00:00:00

abstract：:Traditional drug discovery involves the screening of lead compounds from a chemical library by using cell-based high throughput screening (HTS) procedures. This has created a demand for the development of cell-based microarray chips for HTS of compounds. Although several cell-based microarray devices and procedures fo...

journal_title：Biofabrication

authors： Fujita S,Onuki-Nagasaki R,Ikuta K,Hara Y

更新日期：2016-12-05 00:00:00

abstract：:Tissue rings with incorporated microscaffolds have been engineered as promising building blocks for constructing biological tubes from the bottom up. However, the microscaffolds available for incorporation are very limited at present. In this paper we provide an efficient strategy to first incorporate microfluidic spu...

journal_title：Biofabrication

authors： Sun T,Shi Q,Yao Y,Sun J,Wang H,Huang Q,Fukuda T

更新日期：2019-06-25 00:00:00

abstract：:Recent research has been focusing on the generation of living personalized osteochondral constructs for joint repair. Native articular cartilage has a zonal structure, which is not reflected in current constructs and which may be a cause of the frequent failure of these repair attempts. Therefore, we investigated the ...

journal_title：Biofabrication

authors： Mancini IAD,Schmidt S,Brommer H,Pouran B,Schäfer S,Tessmar J,Mensinga A,van Rijen MHP,Groll J,Blunk T,Levato R,Malda J,van Weeren PR

更新日期：2020-07-01 00:00:00

abstract：:As an alternative to conventional cell culture and animal testing, an organ-on-a-chip is applied to study the biological phenomena of organ development and disease, as well as the interactions between human tissues and external stimuli such as chemicals, forces and electricity. The pattern design of a microfluidic cha...

journal_title：Biofabrication

authors： Mao M,He J,Lu Y,Li X,Li T,Zhou W,Li D

更新日期：2018-02-05 00:00:00

abstract：:In this paper we explore the printability of reversible networks formed by catechol functionalized PEG solutions and metal cations (Al3+, Fe3+ or V3+). The printability and shape fidelity were dependent on the ink composition (metal ion type, pH, PEG molecular weight) and printing parameters (extrusion pressure and pr...

journal_title：Biofabrication

authors： Włodarczyk-Biegun MK,Paez JI,Villiou M,Feng J,Del Campo A

更新日期：2020-04-29 00:00:00

abstract：:Despite the widespread use as platforms for various biomedical applications, engineering hydrogels to impart multifunctionality and control physical properties, while closely mimicking the native cellular microenvironment, is still a significant challenge. Herein, nanofibers consisting of hydrophilic and photocrosslin...

journal_title：Biofabrication

authors： Kim S,Cha C

更新日期：2019-12-19 00:00:00

abstract：:The aim of this study was to comparatively evaluate the angiogenic capacity of cocultures using either human bone marrow- or human adipose tissue-derived mesenchymal stem cells (MSCs) (BM- or AT-MSCs) with human umbilical vein endothelial cells (HUVECs) both in vitro and in vivo at early time points (i.e. days 3 and 7...

journal_title：Biofabrication

authors： Ma J,Yang F,Both SK,Prins HJ,Helder MN,Pan J,Cui FZ,Jansen JA,van den Beucken JJ

更新日期：2014-03-01 00:00:00

abstract：:Cell therapy represents a promising option for revascularization of ischemic tissues. However, injection of dispersed cells is not optimal to ensure precise homing into the recipient's vasculature. Implantation of cell-engineered scaffolds around the occluded artery may obviate these limitations. Here, we employed the...

journal_title：Biofabrication

authors： Carrabba M,De Maria C,Oikawa A,Reni C,Rodriguez-Arabaolaza I,Spencer H,Slater S,Avolio E,Dang Z,Spinetti G,Madeddu P,Vozzi G

更新日期：2016-03-24 00:00:00

abstract：:A major challenge in muscle tissue engineering is mimicking the ordered nanostructure of native collagen fibrils in muscles. Electrospun nanofiber constructs have been proposed as promising candidate alternatives to natural extracellular matrix. Here, we introduce a novel method to fabricate a two-dimension (2D) sheet...

journal_title：Biofabrication

authors： Park SH,Koh UH,Kim M,Yang DY,Suh KY,Shin JH

更新日期：2014-06-01 00:00:00

abstract：:Three-dimensional bioprinting of biomaterials shows great potential for producing cell-encapsulated scaffolds to repair nerves after injury or disease. For this, preparation of biomaterials and bioprinting itself are critical to create scaffolds with both biological and mechanical properties appropriate for nerve rege...

journal_title：Biofabrication

authors： Ning L,Sun H,Lelong T,Guilloteau R,Zhu N,Schreyer DJ,Chen X

更新日期：2018-06-29 00:00:00

abstract：:In the pharmaceutical industry, new drugs are tested to find appropriate compounds for therapeutic purposes for contemporary diseases. Unfortunately, novel compounds emerge at expensive prices and current target evaluation processes have limited throughput, thus leading to an increase of cost and time for drug develop...

journal_title：Biofabrication

authors： Rodríguez-Dévora JI,Zhang B,Reyna D,Shi ZD,Xu T

更新日期：2012-09-01 00:00:00

abstract：:Nerve tissues contain hierarchically ordered nerve fibers, while each of the nerve fibers has nano-oriented fibrous extracellular matrix and a core-shell structure of tubular myelin sheath with elongated axons encapsulated. Here, we report, for the first time, a ready approach to fabricate biomimetic nerve fibers whic...

journal_title：Biofabrication

authors： Chen S,Wu C,Liu A,Wei D,Xiao Y,Guo Z,Chen L,Zhu Y,Sun J,Luo H,Fan H

更新日期：2020-05-12 00:00:00

abstract：:The physical and mechanical properties of cells modulate their behavior such proliferation rate, migration and extracellular matrix remodeling. In order to study cell behavior in a tissue-like environment in vitro, it is of utmost importance to develop biologically and physically relevant 3D cell models. Here, we char...

journal_title：Biofabrication

authors： Pillet F,Gibot L,Madi M,Rols MP,Dague E

更新日期：2017-05-11 00:00:00

abstract：:Tissue engineering has been developed with the ultimate aim of manufacturing human organs, but success has been limited to only thin tissues and tissues with no significant structures. In order to construct more complicated tissues, we have developed a three-dimensional (3D) fabrication technology in which 3D structur...

journal_title：Biofabrication

authors： Arai K,Iwanaga S,Toda H,Genci C,Nishiyama Y,Nakamura M

更新日期：2011-09-01 00:00:00

abstract：:Bioprinting of living cells is rapidly developing as an advanced biofabrication approach to engineer tissues. Bioinks can be extruded in three-dimensions (3D) to fabricate complex and hierarchical constructs for implantation. However, a lack of functionality can often be attributed to poor bioink properties. Indeed, a...

journal_title：Biofabrication

authors： Cidonio G,Alcala-Orozco CR,Lim KS,Glinka M,Mutreja I,Kim YH,Dawson JI,Woodfield TBF,Oreffo ROC

更新日期：2019-06-12 00:00:00