4D bioprinting: the next-generation technology for biofabrication enabled by stimuli-responsive materials.

abstract：:Advances in three-dimensional cell cultures offer new opportunities in biomedical research and drug development. However, there are still challenges to overcome, including the lack of reliability, repeatability and complexity of tissues obtained by these techniques. In this study, we describe a new bioprinting system ...

journal_title：Biofabrication

authors： da Conceicao Ribeiro R,Pal D,Ferreira AM,Gentile P,Benning M,Dalgarno K

更新日期：2018-12-27 00:00:00

abstract：:Laser-assisted bioprinting (LaBP) allows the realization of computer-generated 3D tissue grafts consisting of cells embedded in a hydrogel environment. In this study, human adipose-derived stem cells (hASCs) were printed in a free-scalable 3D grid pattern by means of LaBP. We demonstrate that neither the proliferation...

journal_title：Biofabrication

authors： Gruene M,Pflaum M,Deiwick A,Koch L,Schlie S,Unger C,Wilhelmi M,Haverich A,Chichkov BN

更新日期：2011-03-01 00:00:00

abstract：:Cardiovascular diseases (CVDs) are considered the principal cause of worldwide death, being atherosclerosis the main etiology. Up to now, the predominant treatment for CVDs has been bypass surgery from autologous source. However, due to previous harvest or the type of disease, this is not always an option. For this re...

journal_title：Biofabrication

authors： Bosch Rué E,Delgado LM,Gil FJ,Perez RA

更新日期：2020-09-30 00:00:00

abstract：:A major limitation of existing 3D implantable structures for bone tissue engineering is that most of the cells rapidly attach on the outer edges of the structure, restricting the cells penetration into the inner parts and causing the formation of a necrotic core. Furthermore, these structures generally possess a rando...

journal_title：Biofabrication

authors： Paun IA,Popescu RC,Mustaciosu CC,Zamfirescu M,Calin BS,Mihailescu M,Dinescu M,Popescu A,Chioibasu D,Soproniy M,Luculescu CR

更新日期：2018-02-05 00:00:00

abstract：:The inkjet ejection technology used in printers has been adopted and research has been conducted on manufacturing artificial tissue by patterning cells through micronozzle ejection of small droplets containing multiple cells. However, stable injection of cells has proven difficult, owing to the frequent occurrence of ...

journal_title：Biofabrication

authors： Yamaguchi S,Ueno A,Akiyama Y,Morishima K

更新日期：2012-12-01 00:00:00

abstract：:In the body, cells are surrounded by an interconnected mesh of insoluble, bioactive protein fibres to which they adhere in a well-controlled manner, embedded in a hydrogel-like highly hydrated matrix. True morphological and biochemical mimicry of this so-called extracellular matrix (ECM) remains a challenge but appear...

journal_title：Biofabrication

authors： Schulte VA,Hahn K,Dhanasingh A,Heffels KH,Groll J

更新日期：2014-06-01 00:00:00

abstract：:Three-dimensional (3D) printed poly(ε-caprolactone) (PCL) based scaffolds have being proposed for different tissue engineering applications. This study addresses the design and fabrication of 3D PCL constructs with different struts alignments at 90°, 45° and 90° with offset. The morphology and the mechanical behavior ...

journal_title：Biofabrication

authors： Ribeiro JFM,Oliveira SM,Alves JL,Pedro AJ,Reis RL,Fernandes EM,Mano JF

更新日期：2017-05-11 00:00:00

abstract：:The physical and mechanical properties of cells modulate their behavior such proliferation rate, migration and extracellular matrix remodeling. In order to study cell behavior in a tissue-like environment in vitro, it is of utmost importance to develop biologically and physically relevant 3D cell models. Here, we char...

journal_title：Biofabrication

authors： Pillet F,Gibot L,Madi M,Rols MP,Dague E

更新日期：2017-05-11 00:00:00

abstract：:Tissue engineering has been developed with the ultimate aim of manufacturing human organs, but success has been limited to only thin tissues and tissues with no significant structures. In order to construct more complicated tissues, we have developed a three-dimensional (3D) fabrication technology in which 3D structur...

journal_title：Biofabrication

authors： Arai K,Iwanaga S,Toda H,Genci C,Nishiyama Y,Nakamura M

更新日期：2011-09-01 00:00:00

abstract：:Technical limitations of traditional electrospinning make it hard to produce three-dimensional (3D) scaffolds with hierarchical pore structures. Here, porous polycaprolactone (PCL) nanofiber meshes with different nano-hydroxyapatite (nHA) concentrations were prepared by electrospinning with stainless steel mesh as the...

journal_title：Biofabrication

authors： Song J,Zhu G,Wang L,An G,Shi X,Wang Y

更新日期：2017-02-14 00:00:00

abstract：:Bioprinting of living cells is rapidly developing as an advanced biofabrication approach to engineer tissues. Bioinks can be extruded in three-dimensions (3D) to fabricate complex and hierarchical constructs for implantation. However, a lack of functionality can often be attributed to poor bioink properties. Indeed, a...

journal_title：Biofabrication

authors： Cidonio G,Alcala-Orozco CR,Lim KS,Glinka M,Mutreja I,Kim YH,Dawson JI,Woodfield TBF,Oreffo ROC

更新日期：2019-06-12 00:00:00

abstract：:An ordered cellulose film scaffold, termed a nematic ordered cellulose (NOC) template, had unique surface properties and successfully induced the establishment of a three-dimensional (3D), hierarchical structure of epidermal cells by cell attachment and subsequent culture. Initially, the scaffold surface properties we...

journal_title：Biofabrication

authors： Seyama T,Suh EY,Kondo T

更新日期：2013-06-01 00:00:00

abstract：:An engineered three-dimensional scaffold with hierarchical porosity and multiple niche microenvironments is produced using a combined multi-nozzle deposition-freeze casting technique. In this paper we present a process to fabricate a scaffold with improved interconnectivity and hierarchical porosity. The scaffold is p...

journal_title：Biofabrication

authors： Snyder JE,Hunger PM,Wang C,Hamid Q,Wegst UG,Sun W

更新日期：2014-03-01 00:00:00

abstract：:We previously developed the Bio-Pick, Place, and Perfuse (Bio-P3) instrument to fabricate large perfusable tissue constructs by stacking and aligning scaffold-free living microtissues with integrated lumens. The Bio-P3 required an actuating mechanism to manipulate living microtissues of various sizes and shapes that a...

journal_title：Biofabrication

authors： Ip BC,Cui F,Tripathi A,Morgan JR

更新日期：2016-05-25 00:00:00

abstract：:Tissue engineering needs innovative solutions to better fit the requirements of a minimally invasive approach, providing at the same time instructive cues to cells. The use of shape memory polyurethane has been investigated by producing 4D scaffolds via additive manufacturing technology. Scaffolds with two different p...

journal_title：Biofabrication

authors： Hendrikson WJ,Rouwkema J,Clementi F,van Blitterswijk CA,Farè S,Moroni L

更新日期：2017-08-02 00:00:00

abstract：:Tissue engineering based on building blocks is an emerging method to fabricate 3D tissue constructs. This method requires depositing and assembling building blocks (cell-laden microgels) at high throughput. The current technologies (e.g., molding and photolithography) to fabricate microgels have throughput challenges ...

journal_title：Biofabrication

authors： Xu F,Moon SJ,Emre AE,Turali ES,Song YS,Hacking SA,Nagatomi J,Demirci U

更新日期：2010-03-01 00:00:00

abstract：:Drop-on-demand (DoD) inkjet printing has been explored for a range of applications, including those to selectively deposit cellular material, due to the high accuracy and scalability of such systems when compared with alternative bioprinting techniques. Despite this, there remain considerable limitations when handling...

journal_title：Biofabrication

authors： Dudman JPR,Ferreira AM,Gentile P,Wang X,Ribeiro RDC,Benning M,Dalgarno KW

更新日期：2020-08-12 00:00:00

abstract：:Four-dimensional (4D) bioprinting of cell-laden constructs with programmable shape-morphing structures has gained increasing attention in the field of biofabrication and tissue engineering. Currently, most of the widely used materials for 4D printing, including N-isopropylacrylamide-based polymers, are not commonly us...

journal_title：Biofabrication

authors： Luo Y,Lin X,Chen B,Wei X

更新日期：2019-09-13 00:00:00

abstract：:We have developed cell sheet technology as a modern method for the fabrication of functional tissue-like and organ-like structures. This technology allows for a sheet of interconnected cells and cells in full contact with their natural extracellular environment to be obtained. A cell sheet can be patterned and compose...

journal_title：Biofabrication

authors： Hannachi IE,Yamato M,Okano T

更新日期：2009-06-01 00:00:00

abstract：:Traditional drug discovery involves the screening of lead compounds from a chemical library by using cell-based high throughput screening (HTS) procedures. This has created a demand for the development of cell-based microarray chips for HTS of compounds. Although several cell-based microarray devices and procedures fo...

journal_title：Biofabrication

authors： Fujita S,Onuki-Nagasaki R,Ikuta K,Hara Y

更新日期：2016-12-05 00:00:00

abstract：:In conventional primary cultures, cardiac cells prepared from a newborn rat undergo spontaneous formation of cell clusters after several days. These cell clusters may be non-homogeneously distributed on a flat surface and show irregular beating which can be recorded by calcium ion imaging. In order to improve the cell...

journal_title：Biofabrication

authors： Wang L,Liu L,Magome N,Agladze K,Chen Y

更新日期：2013-09-01 00:00:00

abstract：:One of the major issues in tissue engineering has been the development of three-dimensional (3D) scaffolds, which serve as a structural template for cell growth and extracellular matrix formation. In scaffold-based tissue engineering, 3D printing (3DP) technology has been successfully applied for the fabrication of co...

journal_title：Biofabrication

authors： Park JH,Jung JW,Kang HW,Cho DW

更新日期：2014-06-01 00:00:00

abstract：:Silica-bonded calcite scaffolds have been successfully 3D-printed by direct ink writing, starting from a paste comprising a silicone polymer and calcite powders, calibrated in order to match a SiO2/CaCO3 weight balance of 35/65. The scaffolds, fabricated with two slightly different geometries, were first cross-linked ...

journal_title：Biofabrication

authors： Fiocco L,Elsayed H,Badocco D,Pastore P,Bellucci D,Cannillo V,Detsch R,Boccaccini AR,Bernardo E

更新日期：2017-05-11 00:00:00

abstract：:The precise positioning and arrangement of cell spheroids and organoids are critical to reconstructing complex tissue architecture for tissue engineering and regenerative medicine. Here, we present a digital acoustofluidic method to manipulate cell spheroids and organoids with unprecedented dexterity. By introducing l...

journal_title：Biofabrication

authors： Cai H,Wu Z,Ao Z,Nunez A,Chen B,Jiang L,Bondesson M,Guo F

更新日期：2020-07-01 00:00:00

abstract：:Recent research has been focusing on the generation of living personalized osteochondral constructs for joint repair. Native articular cartilage has a zonal structure, which is not reflected in current constructs and which may be a cause of the frequent failure of these repair attempts. Therefore, we investigated the ...

journal_title：Biofabrication

authors： Mancini IAD,Schmidt S,Brommer H,Pouran B,Schäfer S,Tessmar J,Mensinga A,van Rijen MHP,Groll J,Blunk T,Levato R,Malda J,van Weeren PR

更新日期：2020-07-01 00:00:00

abstract：:Current technologies for manufacturing of microfluidic devices include soft-lithography, wet and dry etching, thermoforming, micro-machining and three-dimensional (3D) printing. Among them, soft-lithography has been the mostly preferred one in medical and pharmaceutical fields due to its ability to generate polydimeth...

journal_title：Biofabrication

authors： Ozbolat V,Dey M,Ayan B,Ozbolat IT

更新日期：2019-04-16 00:00:00

abstract：:Omentum-based matrices fabricated by decellularization have the potential to serve as autologous scaffolds for tissue engineering. Transplantation of such scaffolds prepared from the patient's own biomaterial may reduce the immunogenic response after transplantation. Recently we reported on the potential of the decell...

journal_title：Biofabrication

authors： Soffer-Tsur N,Shevach M,Shapira A,Peer D,Dvir T

更新日期：2014-09-01 00:00:00

abstract：:Cell mechanical microenvironment (CMM) significantly affects cell behaviors such as spreading, migration, proliferation and differentiation. However, most studies on cell response to mechanical stimulation are based on two-dimensional (2D) planar substrates, which cannot mimic native three-dimensional (3D) CMM. Accumu...

journal_title：Biofabrication

authors： Huang G,Wang L,Wang S,Han Y,Wu J,Zhang Q,Xu F,Lu TJ

更新日期：2012-12-01 00:00:00

abstract：:Plasma treatment is a method to modify the physicochemical properties of biomaterials, which consequently may affect interactions with cells. Based on the rationale that physical cues on the surface of culture substrates and implants, such as surface roughness, have proven to alter cell behaviour, we used electrospinn...

journal_title：Biofabrication

authors： Nandakumar A,Tahmasebi Birgani Z,Santos D,Mentink A,Auffermann N,van der Werf K,Bennink M,Moroni L,van Blitterswijk C,Habibovic P

更新日期：2013-03-01 00:00:00

abstract：:In the pharmaceutical industry, new drugs are tested to find appropriate compounds for therapeutic purposes for contemporary diseases. Unfortunately, novel compounds emerge at expensive prices and current target evaluation processes have limited throughput, thus leading to an increase of cost and time for drug develop...

journal_title：Biofabrication

authors： Rodríguez-Dévora JI,Zhang B,Reyna D,Shi ZD,Xu T

更新日期：2012-09-01 00:00:00