Cell sheet technology and cell patterning for biofabrication.

abstract：:Cardiovascular diseases (CVDs) are considered the principal cause of worldwide death, being atherosclerosis the main etiology. Up to now, the predominant treatment for CVDs has been bypass surgery from autologous source. However, due to previous harvest or the type of disease, this is not always an option. For this re...

journal_title：Biofabrication

authors： Bosch Rué E,Delgado LM,Gil FJ,Perez RA

更新日期：2020-09-30 00:00:00

abstract：:The high attrition rate of neuro-pharmaceuticals as they proceed to market necessitates the development of clinically-relevant in vitro neural microphysiological systems that can be utilized during the preclinical screening phase to assess the safety and efficacy of potential compounds. Historically, proposed models h...

journal_title：Biofabrication

authors： Bowser DA,Moore MJ

更新日期：2019-10-21 00:00:00

abstract：:Silica-bonded calcite scaffolds have been successfully 3D-printed by direct ink writing, starting from a paste comprising a silicone polymer and calcite powders, calibrated in order to match a SiO2/CaCO3 weight balance of 35/65. The scaffolds, fabricated with two slightly different geometries, were first cross-linked ...

journal_title：Biofabrication

authors： Fiocco L,Elsayed H,Badocco D,Pastore P,Bellucci D,Cannillo V,Detsch R,Boccaccini AR,Bernardo E

更新日期：2017-05-11 00:00:00

abstract：:An important unsolved challenge in tissue engineering has been the inability to replicate the geometry and function of vascular networks and blood vessels. Here, we engineer a user-defined 3D microfluidic vascular channel using 3D printing-enabled hydrogel casting. First, a hollow L-shaped channel is developed using a...

journal_title：Biofabrication

authors： Yang L,Shridhar SV,Gerwitz M,Soman P

更新日期：2016-08-26 00:00:00

abstract：:In the past few decades, 3D printing has played a significant role in fabricating scaffolds with consistent, complex structure that meet patient-specific needs in future clinical applications. Although many studies have contributed to this emerging field of additive manufacturing, which includes material development a...

journal_title：Biofabrication

authors： Guo T,Holzberg TR,Lim CG,Gao F,Gargava A,Trachtenberg JE,Mikos AG,Fisher JP

更新日期：2017-04-12 00:00:00

abstract：:Nature has evolved to grow and regenerate tissues and organs using self-assembling processes capable of organizing a wide variety of molecular building-blocks at multiple size scales. As the field of biofabrication progresses, it is essential to develop innovative ways that can enhance our capacity to build more compl...

journal_title：Biofabrication

authors： Hedegaard CL,Mata A

更新日期：2020-06-01 00:00:00

abstract：:Cell-imprinting technology is a novel method for directing stem cell fate using substrates molded from target cells. Here, we fabricated and studied cell-imprinted substrates for neural priming in human adipose-derived stem cells in the absence of chemical cues. We molded polydimethylsiloxane (PDMS) silicone substrate...

journal_title：Biofabrication

authors： Ghazali ZS,Eskandari M,Bonakdar S,Renaud P,Mashinchian O,Shalileh S,Bonini F,Uckay I,Preynat-Seauve O,Braschler T

更新日期：2020-10-30 00:00:00

abstract：:The inkjet ejection technology used in printers has been adopted and research has been conducted on manufacturing artificial tissue by patterning cells through micronozzle ejection of small droplets containing multiple cells. However, stable injection of cells has proven difficult, owing to the frequent occurrence of ...

journal_title：Biofabrication

authors： Yamaguchi S,Ueno A,Akiyama Y,Morishima K

更新日期：2012-12-01 00:00:00

abstract：:We demonstrate a simple, accurate and versatile method to manipulate Parylene C, a material widely known for its high biocompatibility, and transform it to a substrate that can effectively control the cellular microenvironment and consequently affect the morphology and function of the cells in vitro. The Parylene C sc...

journal_title：Biofabrication

authors： Trantidou T,Rao C,Barrett H,Camelliti P,Pinto K,Yacoub MH,Athanasiou T,Toumazou C,Terracciano CM,Prodromakis T

更新日期：2014-06-01 00:00:00

abstract：:We demonstrate a novel application of TiO2 photocatalysis for modifying the cell affinity of a scaffold surface in a cell-culture environment. An as-deposited octadecyltrichlorosilane self-assembled monolayer (OTS SAM) on TiO2 was found to be hydrophobic and stably adsorbed serum albumins that blocked subsequent adsor...

journal_title：Biofabrication

authors： Yamamoto H,Demura T,Morita M,Kono S,Sekine K,Shinada T,Nakamura S,Tanii T

更新日期：2014-09-01 00:00:00

abstract：:Here we developed a composite scaffold of pearl/poly(lactic-co-glycolic acid) (pearl/PLGA) utilizing the low-temperature deposition manufacturing (LDM). LDM makes it possible to fabricate scaffolds with designed microstructure and macrostructure, while keeping the bioactivity of biomaterials by working at a low temper...

journal_title：Biofabrication

authors： Xu M,Li Y,Suo H,Yan Y,Liu L,Wang Q,Ge Y,Xu Y

更新日期：2010-06-01 00:00:00

abstract：:Tissue engineering based on building blocks is an emerging method to fabricate 3D tissue constructs. This method requires depositing and assembling building blocks (cell-laden microgels) at high throughput. The current technologies (e.g., molding and photolithography) to fabricate microgels have throughput challenges ...

journal_title：Biofabrication

authors： Xu F,Moon SJ,Emre AE,Turali ES,Song YS,Hacking SA,Nagatomi J,Demirci U

更新日期：2010-03-01 00:00:00

abstract：:Native small intestine possesses distinct multi-scale structures (e.g., crypts, villi) not included in traditional 2D intestinal culture models for drug delivery and regenerative medicine. The known impact of structure on cell function motivates exploration of the influence of intestinal topography on the phenotype of...

journal_title：Biofabrication

authors： Koppes AN,Kamath M,Pfluger CA,Burkey DD,Dokmeci M,Wang L,Carrier RL

更新日期：2016-08-22 00:00:00

abstract：:Four-dimensional (4D) bioprinting, encompassing a wide range of disciplines including bioengineering, materials science, chemistry, and computer sciences, is emerging as the next-generation biofabrication technology. By utilizing stimuli-responsive materials and advanced three-dimensional (3D) bioprinting strategies, ...

journal_title：Biofabrication

authors： Li YC,Zhang YS,Akpek A,Shin SR,Khademhosseini A

更新日期：2016-12-02 00:00:00

abstract：:A major challenge in muscle tissue engineering is mimicking the ordered nanostructure of native collagen fibrils in muscles. Electrospun nanofiber constructs have been proposed as promising candidate alternatives to natural extracellular matrix. Here, we introduce a novel method to fabricate a two-dimension (2D) sheet...

journal_title：Biofabrication

authors： Park SH,Koh UH,Kim M,Yang DY,Suh KY,Shin JH

更新日期：2014-06-01 00:00:00

abstract：:Laser-assisted bioprinting (LaBP) allows the realization of computer-generated 3D tissue grafts consisting of cells embedded in a hydrogel environment. In this study, human adipose-derived stem cells (hASCs) were printed in a free-scalable 3D grid pattern by means of LaBP. We demonstrate that neither the proliferation...

journal_title：Biofabrication

authors： Gruene M,Pflaum M,Deiwick A,Koch L,Schlie S,Unger C,Wilhelmi M,Haverich A,Chichkov BN

更新日期：2011-03-01 00:00:00

abstract：:The aim of this study was to comparatively evaluate the angiogenic capacity of cocultures using either human bone marrow- or human adipose tissue-derived mesenchymal stem cells (MSCs) (BM- or AT-MSCs) with human umbilical vein endothelial cells (HUVECs) both in vitro and in vivo at early time points (i.e. days 3 and 7...

journal_title：Biofabrication

authors： Ma J,Yang F,Both SK,Prins HJ,Helder MN,Pan J,Cui FZ,Jansen JA,van den Beucken JJ

更新日期：2014-03-01 00:00:00

abstract：:We previously developed the Bio-Pick, Place, and Perfuse (Bio-P3) instrument to fabricate large perfusable tissue constructs by stacking and aligning scaffold-free living microtissues with integrated lumens. The Bio-P3 required an actuating mechanism to manipulate living microtissues of various sizes and shapes that a...

journal_title：Biofabrication

authors： Ip BC,Cui F,Tripathi A,Morgan JR

更新日期：2016-05-25 00:00:00

abstract：:Current technologies for manufacturing of microfluidic devices include soft-lithography, wet and dry etching, thermoforming, micro-machining and three-dimensional (3D) printing. Among them, soft-lithography has been the mostly preferred one in medical and pharmaceutical fields due to its ability to generate polydimeth...

journal_title：Biofabrication

authors： Ozbolat V,Dey M,Ayan B,Ozbolat IT

更新日期：2019-04-16 00:00:00

abstract：:In recent years, novel biofabrication technologies have enabled the rapid manufacture of hydrogel-cell suspensions into tissue-imitating constructs. The development of novel materials for biofabrication still remains a challenge due to a gap between contradicting requirements such as three-dimensional printability and...

journal_title：Biofabrication

authors： Köpf M,Campos DF,Blaeser A,Sen KS,Fischer H

更新日期：2016-05-20 00:00:00

abstract：:Advances in three-dimensional cell cultures offer new opportunities in biomedical research and drug development. However, there are still challenges to overcome, including the lack of reliability, repeatability and complexity of tissues obtained by these techniques. In this study, we describe a new bioprinting system ...

journal_title：Biofabrication

authors： da Conceicao Ribeiro R,Pal D,Ferreira AM,Gentile P,Benning M,Dalgarno K

更新日期：2018-12-27 00:00:00

abstract：:Tissue engineering needs innovative solutions to better fit the requirements of a minimally invasive approach, providing at the same time instructive cues to cells. The use of shape memory polyurethane has been investigated by producing 4D scaffolds via additive manufacturing technology. Scaffolds with two different p...

journal_title：Biofabrication

authors： Hendrikson WJ,Rouwkema J,Clementi F,van Blitterswijk CA,Farè S,Moroni L

更新日期：2017-08-02 00:00:00

abstract：:The physical and mechanical properties of cells modulate their behavior such proliferation rate, migration and extracellular matrix remodeling. In order to study cell behavior in a tissue-like environment in vitro, it is of utmost importance to develop biologically and physically relevant 3D cell models. Here, we char...

journal_title：Biofabrication

authors： Pillet F,Gibot L,Madi M,Rols MP,Dague E

更新日期：2017-05-11 00:00:00

abstract：:Plasma treatment is a method to modify the physicochemical properties of biomaterials, which consequently may affect interactions with cells. Based on the rationale that physical cues on the surface of culture substrates and implants, such as surface roughness, have proven to alter cell behaviour, we used electrospinn...

journal_title：Biofabrication

authors： Nandakumar A,Tahmasebi Birgani Z,Santos D,Mentink A,Auffermann N,van der Werf K,Bennink M,Moroni L,van Blitterswijk C,Habibovic P

更新日期：2013-03-01 00:00:00

abstract：:Critical understanding of the complex metastatic cascade of prostate cancer is necessary for the development of a therapeutic interventions for treating metastatic prostate cancer. Increasing evidence supports the synergistic role of biochemical and biophysical cues in cancer progression at metastases. The biochemical...

journal_title：Biofabrication

authors： Jasuja H,Kar S,Katti DR,Katti K

更新日期：2021-01-08 00:00:00

abstract：:To overcome the drawbacks of in vitro liver testing during drug development, numerous liver-on-a-chip models have been developed. However, current liver-on-a-chip technologies are labor-intensive, lack extracellular matrix (ECM) essential for liver cells, and lack a biliary system essential for excreting bile acids, w...

journal_title：Biofabrication

authors： Lee H,Chae S,Kim JY,Han W,Kim J,Choi Y,Cho DW

更新日期：2019-01-16 00:00:00

abstract：:Bioprinting of living cells is rapidly developing as an advanced biofabrication approach to engineer tissues. Bioinks can be extruded in three-dimensions (3D) to fabricate complex and hierarchical constructs for implantation. However, a lack of functionality can often be attributed to poor bioink properties. Indeed, a...

journal_title：Biofabrication

authors： Cidonio G,Alcala-Orozco CR,Lim KS,Glinka M,Mutreja I,Kim YH,Dawson JI,Woodfield TBF,Oreffo ROC

更新日期：2019-06-12 00:00:00

abstract：:Scaffold-free 3D cell cultures (e.g. pellet cultures) are widely used in medical science, including cartilage regeneration. Their drawbacks are high time/reagent consumption and lack of early readout parameters. While optimisation was achieved by automation or simplified spheroid generation, most culture systems remai...

journal_title：Biofabrication

authors： Fürsatz M,Gerges P,Wolbank S,Nürnberger S

更新日期：2021-01-29 00:00:00

abstract：:A critical consideration in tissue engineering is to recapitulate the microstructural organization of native tissues that is essential to their function. Scaffold-based techniques have focused on achieving this via the contact guidance principle wherein topographical cues offered by scaffold fibers direct migration an...

journal_title：Biofabrication

authors： Chansoria P,Narayanan LK,Schuchard K,Shirwaiker R

更新日期：2019-04-26 00:00:00

abstract：:Degeneration of the intervertebral disc (IVD) represents a significant musculoskeletal disease burden. Tissue engineering has proposed several strategies comprising the use of biodegradable materials to prepare scaffolds that can present mechanical properties similar to those of native IVD tissues. However, this might...

journal_title：Biofabrication

authors： van Uden S,Silva-Correia J,Correlo VM,Oliveira JM,Reis RL

更新日期：2015-01-21 00:00:00