Abstract:
:Intravascular catheter-associated infections (CAIs), which are normally induced by microbial adhesion and subsequent biofilm formation, are a major cause of morbidity and mortality. Therefore, strategies to prevent CAIs are in great demand. In this study, a series of diblock copolymers of PEG and cationic polycarbonate with various compositions were synthesized by metal-free organocatalytic ring-opening polymerization, and coated onto silicone rubber (a commonly used catheter material) at different concentrations via a reactive polydopamine coating. Static contact angle and X-ray photoelectron spectroscopy measurements proved the successful coating, and quartz crystal microbalance results showed that the coating thickness increased as polymer concentration increased. Methicillin-susceptible Staphylococcus aureus (MSSA) and methicillin-resistant S. aureus (MRSA) isolates - leading causes of intravascular CAIs - were employed to evaluate the antibacterial and antifouling activities of the polymer coatings. Polymer coatings with a hydrophobic component effectively killed planktonic MSSA and MRSA in solution and prevented their fouling on silicone rubber surface. Live/dead cell staining experiments revealed that polymer coatings with the optimal polymer composition possessed significantly higher antifouling activity than PEG coating. In addition, scanning electron microscopic studies showed that the polymer coating inhibited S. aureus biofilm formation over a period of 7 days. Furthermore, the polymer coating caused no significant hemolysis, and there was no blood protein adsorption or platelet adhesion observed. Therefore, PEG-b-cationic polycarbonates with optimal compositions are effective antifouling and antibacterial coatings for the prevention of intravascular CAIs.
journal_name
Biomaterialsjournal_title
Biomaterialsauthors
Ding X,Yang C,Lim TP,Hsu LY,Engler AC,Hedrick JL,Yang YYdoi
10.1016/j.biomaterials.2012.06.001subject
Has Abstractpub_date
2012-10-01 00:00:00pages
6593-603issue
28eissn
0142-9612issn
1878-5905pii
S0142-9612(12)00637-0journal_volume
33pub_type
杂志文章相关文献
BIOMATERIALS文献大全abstract::Recently, chitosan-gelatin scaffolds have gained much attention in various tissue engineering applications. However, the underlying cell-matrix interactions remain unclear in addition to the scaffold degradation and mechanical characteristics. In this study, we evaluated (i) the degradation kinetics of chitosan and ch...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2005.05.036
更新日期:2005-12-01 00:00:00
abstract::The suitability of chitosan-based hydrogels as scaffolds for the encapsulation of intervertebral disc (IVD) cells and the accumulation of a functional extracellular matrix mimicking that of the nucleus pulposus (NP) was investigated. The specific hypothesis under study was that the cationic chitosan would form an idea...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2005.06.037
更新日期:2006-01-01 00:00:00
abstract::In the present work, we designed and synthesized a novel mono-guanidine heterolipid (MGH) and confirmed its structure by NMR and ESI-MS. The MGH was used as cationic lipid in developing etoposide loaded cationic self-microemulsifying drug delivery system (ECS) intended to be delivered by intratumoral route. The ECS ex...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2015.03.040
更新日期:2015-07-01 00:00:00
abstract::DNA that encodes tumor-specific antigens represents potential immunostimulatory agents. However, rapid enzymatic degradation and fragmentation of DNA during administration can result in limited vector expression and, consequently, poor efficacy. These challenges have necessitated the use of novel strategies for DNA de...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2015.02.125
更新日期:2015-01-01 00:00:00
abstract::Carbon fiber implants were used to fill osteochondral defects created on the articular surface of the patella of 36 rabbits, for the purpose of studying the long-term histological changes of the repair process. Six months after surgery the defect was filled by fibrous tissue, where the superficial area was organized p...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(00)00144-7
更新日期:2000-11-01 00:00:00
abstract::A novel biodegradable polymer blend was developed for potential biomedical applications. A 50:50 poly(lactide-co-glycolide) (PLAGA) was blended in a 50:50 ratio with the followiing polyphosphazenes (PPHOS): poly[(25% ethyl glycinato)(75% p-methylphenoxy)phosphazene[, poly[(50% ethyl glycinato)(50% p-methylphenoxy)phos...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(97)80009-9
更新日期:1997-12-01 00:00:00
abstract::In this study, we report the systematic comparison of different poly(ethylene glycol) (PEG) self-assembled monolayers on glass with respect to their protein adsorption and cell adhesion resistance. Combining PEGylation with micellar nanolithography allowed the formation of gold nanoparticle arrays on glass and selecti...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2007.07.038
更新日期:2007-11-01 00:00:00
abstract::A PCL/hydrogel construct that would mimic the structural organization, biochemistry and anatomy of meniscus was engineered. The compressive (380 ± 40 kPa) and tensile modulus (18.2 ± 0.9 MPa) of the PCL scaffolds were increased significantly when constructs were printed with a shifted design and circumferential strand...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2019.119361
更新日期:2019-10-01 00:00:00
abstract::Site specific targeting remains elusive for gene and stem cell therapies in the cardiovascular field. One promising option involves use of devices that deliver larger and more sustained cell/gene payloads to specific disease sites using the versatility of percutaneous vascular access technology. Smooth muscle cells (S...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2014.07.016
更新日期:2014-10-01 00:00:00
abstract::This article introduces novel biocompatible tissue adhesives that do not involve any chemical or biochemical reactions, during their application in vivo. The use of these new adhesives is based exclusively on their temperature-dependent rheological properties. Since biocompatibility and biodegradability are additional...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2004.01.040
更新日期:2004-12-01 00:00:00
abstract::We report the fabrication of a one-pot antigen system that delivers antigen to dendritic cells (DCs) and tracks their in vivo migration after injection. Multifunctional polymer nanoparticles containing ovalbumin protein, magnetic resonance imaging contrast agents (iron oxide nanoparticles), and near-infrared fluoropho...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2011.05.013
更新日期:2011-09-01 00:00:00
abstract::The stabilities of two types of polymerically stabilized liposomes consisting of PEG-grafted (DSPC:CHOL:DSPE-PEG1900, 5:4:1) and physically adsorbed carboxymethylchitin (CMC) and carboxymethyl/glycolchitin (CO) are compared. The polyelectrolyte is adsorbed on positive (DSPC:CHOL:DMTAP, 5:4:1) and neutral (DSPC:CHOL, 1...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(98)00004-0
更新日期:1998-07-01 00:00:00
abstract::Polydimethacrylate resins were prepared by photopolymerization of Bis-GMA, TEGDMA, UDMA or Bis-EMA (4) monomer, initiated by camphoroquinone/N,N-dimethylaminoethyl methacrylate system. The study of physical properties of these resins showed that TEGDMA seems to create the most dense polymer network, which however is t...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(02)00380-0
更新日期:2003-02-01 00:00:00
abstract::The objective of this study was to investigate the adhesion, spreading and extracellular matrix synthesis of temporomandibular joint (TMJ) derived cells on non-absorbable scaffold materials to ultimately provide a durable stress-absorbent framework within tissue-engineered disc transplants. Scaffolds were prepared by ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(01)00148-x
更新日期:2001-09-01 00:00:00
abstract::The ability to influence the direction of polymerization of a self-assembling biomolecular system has the potential to generate materials with extremely high anisotropy. In biological systems where highly-oriented cellular populations give rise to aligned and often load-bearing tissue such organized molecular scaffold...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2009.07.070
更新日期:2009-12-01 00:00:00
abstract::An in vitro cell-implant mineralization model system was used to study the effect of transforming growth factor-beta 1(TGF-beta1) on mineralization in human osteoblast cultures. SaOs-2 and primary human osteoblast (HOB) cells were cultured on Tivanium (Ti-6Al-4V) disks. Administration of different concentrations of TG...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(02)00616-6
更新日期:2003-05-01 00:00:00
abstract::A tissue-engineered substitute that facilitates large-volume regeneration of the subcutaneous adipose tissue layer is needed for reconstructive plastic surgery. Towards this goal, we describe the in vitro culture of primary human adipose-derived stem cells (ASC) seeded into placental decellular matrix (PDM) and cross-...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2007.12.028
更新日期:2008-04-01 00:00:00
abstract::RNA interference induced by double-stranded, small interfering RNA (siRNA) molecules has attracted great attention as a genetic therapeutic approach. Despite major advances in this field, new nanoparticle formulations are required for in vivo delivery of siRNA, particularly for tissue-specific delivery of siRNA reagen...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2011.05.022
更新日期:2011-09-01 00:00:00
abstract::Forty squares of tissue, 40 mm X 40 mm, were harvested from bovine pericardium fixed in glutaraldehyde free of tension. Two parallel dumb-bell specimens were excised from each square. In 20 pairs of adjacent samples, two 1 mm cuts were introduced into one of the samples at the centre of the dumb-bell. The other 20 pai...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(89)90098-7
更新日期:1989-05-01 00:00:00
abstract::A series of segmented polydimethylsiloxane (PDMS) polyurea-urethanes was synthesized based on hexane diisocyanate modified polyether-PDMS soft segments. The hard segments consisted of 4,4'-methylene diphenylene diisocyanate, which was chain extended with 1,4-butanediol. The effect of chemical composition of the polyet...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/0142-9612(94)90218-6
更新日期:1994-05-01 00:00:00
abstract::Bioactive composites composed of hydroxyapatite containing glass (HA-G) as a coating and titanium (Ti) or titanium alloy implants as a substrate were prepared by the Cullet method. This method results in the HA-G coating layer on the substrate with a compositional gradient in HA concentration. The results of in vitro ...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(00)00402-6
更新日期:2001-08-01 00:00:00
abstract::Bone marrow is the primary hematopoietic organ, which is involved in multiple malignant diseases including acute and chronic leukemia, multiple myeloma, myelodysplastic syndromes, and bone metastases from solid tumors. These malignancies affect normal homeostasis and reshape the bone marrow microenvironment. There are...
journal_title:Biomaterials
pub_type: 杂志文章,评审
doi:10.1016/j.biomaterials.2017.11.029
更新日期:2018-02-01 00:00:00
abstract::We have previously shown that the high-affinity streptavidin (SA)-biotin interaction enhanced the initial integrin-mediated adhesion of biotinylated endothelial cells to SA-coated surface by serving as an extrinsic bond to stabilize and enhance the intrinsic fibronectin-integrin binding between the cell and surface. H...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(02)00367-8
更新日期:2003-02-01 00:00:00
abstract::The interaction of three cell types important to the wound repair process with collagen/glycosaminoglycan (GAG) dermal regeneration matrices covalently modified with an Arg-Gly-Asp (RGD)-containing peptide was characterized. Function-blocking monoclonal antibodies directed against various integrin subunits were used t...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(97)00103-8
更新日期:1997-12-01 00:00:00
abstract::Bone substitutes of bovine origin are widely used for treatment of bone defects in dental and orthopedic surgery. Due to the occurrence of BSE and the new variant of Creutzfeldt Jakob Disease risks of transmitting diseases through the use of such materials need to be carefully evaluated. Risk analysis can either be ba...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(00)00312-4
更新日期:2001-06-01 00:00:00
abstract::Matrix anisotropy is important for long term in vivo functionality. However, it is not fully understood how to guide matrix anisotropy in vitro. Experiments suggest actin-mediated cell traction contributes. Although F-actin in 2D displays a stretch-avoidance response, 3D data are lacking. We questioned how cyclic stre...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2012.06.103
更新日期:2012-10-01 00:00:00
abstract::A novel class of hyperbranched polymers based on polyglycerol (PG) and poly(ethylene glycol) (PEG) are synthesized by multibranching anionic ring opening polymerization. Multivalent cationic sites are added to these polymers by a post-amination and quarternization reactions. Blood compatibility studies using these pol...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2006.06.021
更新日期:2006-11-01 00:00:00
abstract::This study examined the antibacterial activity of prepolymerized resin filler, in which the bactericide quaternary ammonium was immobilized. The experimental filler was prepared by grinding prepolymerized resin blocks of methacrylate monomers, silica particles, and the antibacterial monomer methacryloyloxydodecylpyrid...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/s0142-9612(03)00217-5
更新日期:2003-09-01 00:00:00
abstract::Current advances in skin tissue engineering and wound healing augur well for the development of split or full thickness skin substitutes to recapitulating the native functional skin. These engineered skin substitutes have fared successfully in recent years with exploration of various emerging technologies. As a result...
journal_title:Biomaterials
pub_type: 杂志文章,评审
doi:10.1016/j.biomaterials.2019.119267
更新日期:2019-09-01 00:00:00
abstract::Conventional amputation prosthetics are problematic because they rely on the stump-socket interface for attachment. Intraosseous transcutaneous amputation prostheses (ITAP) could solve these problems; however they rely on the integrity of the soft tissue-implant interface as a barrier to exogenous agents, and in the p...
journal_title:Biomaterials
pub_type: 杂志文章
doi:10.1016/j.biomaterials.2006.03.041
更新日期:2006-08-01 00:00:00