Tailoring lactide/caprolactone co-oligomers as tissue adhesives.

Abstract:

:This article introduces novel biocompatible tissue adhesives that do not involve any chemical or biochemical reactions, during their application in vivo. The use of these new adhesives is based exclusively on their temperature-dependent rheological properties. Since biocompatibility and biodegradability are additional crucial attributes of tissue adhesives, the polymers were tailored so that they as well as their degradation products are non-toxic. Branched oligomers consisting of a core molecule and biodegradable chains bound to it were synthesized and the relationship between their composition and their adhesive properties under in vitro conditions, was investigated. The oligomers comprised trimethylolpropane as the trifunctional central molecule, while lactoyl and caprolactone units formed the biodegradable segments. Oligomers with glass transition temperatures in the 20-25 degrees C range, were found to perform better. A strong connection was found between the length of the PLA blocks, the glass transition temperature (T(g)) of the different materials and their Adhesive Failure Strength (AFS) at 37 degrees C. The remarkable flexibilizing effect of the caprolactone units incorporated along the PLA blocks, allowed to generate longer biodegradable chains and to improve, therefore, the adhesive strength of the oligomers, while keeping their T(g) within the appropriate temperature interval. The TMP(LA(16)-CL(2)-LA(16)-CL(2)-LA(16))(3) oligomer attained especially high AFS values under in vitro conditions.

journal_name

Biomaterials

journal_title

Biomaterials

authors

Cohn D,Lando G

doi

10.1016/j.biomaterials.2004.01.040

keywords:

subject

Has Abstract

pub_date

2004-12-01 00:00:00

pages

5875-84

issue

27

eissn

0142-9612

issn

1878-5905

pii

S014296120400081X

journal_volume

25

pub_type

杂志文章
  • pH-dependent modulation of fibroblast adhesion on multilayers composed of poly(ethylene imine) and heparin.

    abstract::Adhesion of tissue cells is a prerequisite for their growth and differentiation but prevents also apoptosis. Here the layer-by-layer technique (LbL) was used to design multilayer structures of poly(ethylene imine) (PEI) and heparin (HEP) on glass as model biomaterial to control the adhesion of primary human dermal fib...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2009.06.014

    authors: Niepel MS,Peschel D,Sisquella X,Planell JA,Groth T

    更新日期:2009-10-01 00:00:00

  • Specific role of polysorbate 80 coating on the targeting of nanoparticles to the brain.

    abstract::It was reported that nanoparticles with polysorbate 80 (Tween 80, T-80) coating represented tools used for delivering drugs to brain. Nevertheless, disputations were once aroused for some complications. Aimed to have a better understanding of the specific role of T-80 coating on nanoparticles and simplify the problem,...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2003.09.087

    authors: Sun W,Xie C,Wang H,Hu Y

    更新日期:2004-07-01 00:00:00

  • Immunomodulatory properties of chitosan polymers.

    abstract::The introduction of vaccines is regarded as one of the most successful medical interventions to date. However, there is a clear need for the development of new vaccines for diseases which require the induction of a potent cellular immune response. Advancements in the field of vaccine research have resulted in a move a...

    journal_title:Biomaterials

    pub_type: 杂志文章,评审

    doi:10.1016/j.biomaterials.2018.08.054

    authors: Moran HBT,Turley JL,Andersson M,Lavelle EC

    更新日期:2018-11-01 00:00:00

  • Dexamethasone-conjugated DNA nanotubes as anti-inflammatory agents in vivo.

    abstract::The biopolymer DNA allows to create nanoscale, biocompatible structures, which can be designed in a target-specific and stimuli-responsive manner. DNA carrier systems with these characteristics hold a great potential for nanomedical applications, such as for the treatment of inflammatory diseases. Here we used a DNA-b...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2017.04.031

    authors: Sellner S,Kocabey S,Zhang T,Nekolla K,Hutten S,Krombach F,Liedl T,Rehberg M

    更新日期:2017-07-01 00:00:00

  • Regenerative potentials of platelet-rich plasma enhanced by collagen in retrieving pro-inflammatory cytokine-inhibited chondrogenesis.

    abstract::This study was undertaken to evaluate the role of collagen matrix to enhance platelet-rich plasma (PRP) effects on pro-inflammatory cytokine-induced arthritic model. We have previously demonstrated the highly regenerative roles of PRP to restore disc degeneration and osteoporosis. In this study, PRP modulated by colla...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2011.05.002

    authors: Wu CC,Chen WH,Zao B,Lai PL,Lin TC,Lo HY,Shieh YH,Wu CH,Deng WP

    更新日期:2011-09-01 00:00:00

  • Extraction of high quality RNA from polysaccharide matrices using cetyltrimethylammonium bromide.

    abstract::Polysaccharides are increasingly being used as biomaterials for tissue engineering and regenerative medicine. Quantitative analysis of gene expression from cells in three-dimensional (3D) scaffolds requires extraction of messenger RNA, which is complicated in polysaccharide materials by ionic complexing between nuclei...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2009.11.024

    authors: Wang L,Stegemann JP

    更新日期:2010-03-01 00:00:00

  • Advanced liposome-loaded scaffolds for therapeutic and tissue engineering applications.

    abstract::Liposome is one of the most commonly used drug delivery systems in the world, due to its excellent biocompatibility, satisfactory ability in controlling drug release, and passive targeting capability. However, some drawbacks limit the application of liposomes in clinical, such as problems in transporting, storing, and...

    journal_title:Biomaterials

    pub_type: 杂志文章,评审

    doi:10.1016/j.biomaterials.2019.119706

    authors: Cheng R,Liu L,Xiang Y,Lu Y,Deng L,Zhang H,Santos HA,Cui W

    更新日期:2020-02-01 00:00:00

  • Whole proteome analysis of osteoprogenitor differentiation induced by disordered nanotopography and mediated by ERK signalling.

    abstract::Topographic features can modulate cell behaviours such as proliferation, migration, differentiation and apoptosis. Biochemical mechanotransduction implies the conversion of mechanical forces (e.g. changes in cell spreading and morphology from changing surface topography) into biochemical signal via biomolecules. Still...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2009.05.040

    authors: Kantawong F,Burgess KE,Jayawardena K,Hart A,Burchmore RJ,Gadegaard N,Oreffo RO,Dalby MJ

    更新日期:2009-09-01 00:00:00

  • Behaviour of human osteoblasts cultured on bioactive glass coatings.

    abstract::Two new formulations of bioactive glasses were used as coatings on titanium alloy (TiAl6V4) implants for prosthetic applications in the orthopaedic field. The biocompatibility of these bioglasses, as well as their osteoconductive properties, were assessed by employing primary cultures of human osteoblasts. A nonbioact...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(97)00249-4

    authors: Oliva A,Salerno A,Locardi B,Riccio V,Della Ragione F,Iardino P,Zappia V

    更新日期:1998-06-01 00:00:00

  • Bulk, surface and blood-contacting properties of polyether polyurethanes modified with polydimethylsiloxane macroglycols.

    abstract::The bulk, surface and blood-contacting properties of a series of polyether polyurethanes, modified with three different polydimethylsiloxane (PDMS) macroglycol segments, were evaluated. The PDMS oligomers were terminated with hydroxy-tipped end groups of varying polarity. The effect of substituting the polytetramethyl...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/0142-9612(89)90005-7

    authors: Okkema AZ,Fabrizius DJ,Grasel TG,Cooper SL,Zdrahala RJ

    更新日期:1989-01-01 00:00:00

  • Mechanical properties and aesthetics of FRP orthodontic wire fabricated by hot drawing.

    abstract::The FRP wires 0.5 mm in diameter with a multiple fiber structure were fabricated by drawing the fiber polymer complex at 250 degrees C for an esthetic, transparent orthodontic wire. Biocompatible CaO-P2O5-SiO2-Al2O3 (CPSA) glass fibers of 8-20 microm in diameter were oriented unidirectionally in the longitudinal direc...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(98)00127-6

    authors: Imai T,Watari F,Yamagata S,Kobayashi M,Nagayama K,Toyoizumi Y,Nakamura S

    更新日期:1998-12-01 00:00:00

  • Interactive effects of surface topography and pulsatile electrical field stimulation on orientation and elongation of fibroblasts and cardiomyocytes.

    abstract::In contractile tissues such as myocardium, functional properties are directly related to the cellular orientation and elongation. Thus, tissue engineering of functional cardiac patches critically depends on our understanding of the interaction between multiple guidance cues such as topographical, adhesive or electrica...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2007.06.001

    authors: Au HT,Cheng I,Chowdhury MF,Radisic M

    更新日期:2007-10-01 00:00:00

  • Mechanism of initial attachment of cells derived from human bone to commonly used prosthetic materials during cell culture.

    abstract::The suitability of polymeric biomaterials as surfaces for the attachment and growth of cells has often been investigated in cell culture. In this study the contribution that serum fibronectin (Fn) or vitronectin (Vn) make to the attachment and spreading of cells cultured from explanted human bone (bone-derived cells) ...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/0142-9612(94)90070-1

    authors: Howlett CR,Evans MD,Walsh WR,Johnson G,Steele JG

    更新日期:1994-02-01 00:00:00

  • Sintered porous DP-bioactive glass and hydroxyapatite as bone substitute.

    abstract::There is extensive experimental and surgical experience with the use of bone tissue to fill defects in the skeleton, to bridge non-union sites, and to pack defects in bone created from cyst curettage. DP-bioactive glass with a chemical composition of Na2O 8.4%, SiO2 39.6%, P2O5 12% and CaO 40% has been reported as an ...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:

    authors: Lin FH,Lin CC,Liu HC,Huang YY,Wang CY,Lu CM

    更新日期:1994-10-01 00:00:00

  • Highly potent antimicrobial polyionenes with rapid killing kinetics, skin biocompatibility and in vivo bactericidal activity.

    abstract::Effective antimicrobial agents are important arsenals in our perennial fight against communicable diseases, hospital-acquired and surgical site multidrug-resistant infections. In this study, we devise a strategy for the development of highly efficacious and skin compatible yet inexpensive water-soluble macromolecular ...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2017.02.027

    authors: Liu S,Ono RJ,Wu H,Teo JY,Liang ZC,Xu K,Zhang M,Zhong G,Tan JP,Ng M,Yang C,Chan J,Ji Z,Bao C,Kumar K,Gao S,Lee A,Fevre M,Dong H,Ying JY,Li L,Fan W,Hedrick JL,Yang YY

    更新日期:2017-05-01 00:00:00

  • A synthetic stroma-free germinal center niche for efficient generation of humoral immunity ex vivo.

    abstract::B cells play a major role in the adaptive immune response by producing antigen-specific antibodies against pathogens and imparting immunological memory. Following infection or vaccination, antibody-secreting B cells and memory B cells are generated in specialized regions of lymph nodes and spleens, called germinal cen...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2018.02.039

    authors: Roh KH,Song HW,Pradhan P,Bai K,Bohannon CD,Dale G,Leleux J,Jacob J,Roy K

    更新日期:2018-05-01 00:00:00

  • Bioreactor based engineering of large-scale human cartilage grafts for joint resurfacing.

    abstract::Apart from partial or total joint replacement, no surgical procedure is currently available to treat large and deep cartilage defects associated with advanced diseases such as osteoarthritis. In this work, we developed a perfusion bioreactor system to engineer human cartilage grafts in a size with clinical relevance f...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2010.08.009

    authors: Santoro R,Olivares AL,Brans G,Wirz D,Longinotti C,Lacroix D,Martin I,Wendt D

    更新日期:2010-12-01 00:00:00

  • Sustained release of dexamethasone from hydrophilic matrices using PLGA nanoparticles for neural drug delivery.

    abstract::The release of the anti-inflammatory agent dexamethasone (DEX) from nanoparticles of poly(lactic-co-glycolic acid) (PLGA) embedded in alginate hydrogel (HG) matrices was investigated. DEX-loaded PLGA nanoparticles were prepared using a solvent evaporation technique and were characterized for size, drug loading, and in...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2005.12.021

    authors: Kim DH,Martin DC

    更新日期:2006-05-01 00:00:00

  • The in vivo degradation of a ruthenium labelled polysaccharide-based hydrogel for bone tissue engineering.

    abstract::In this paper we report a new method that permitted for the first time to selectively track a polysaccharide-based hydrogel on bone tissue explants, several weeks after its implantation. The hydrogel, which was developed for bone healing and tissue engineering, was labelled with a ruthenium complex and implanted into ...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2008.11.031

    authors: Laïb S,Fellah BH,Fatimi A,Quillard S,Vinatier C,Gauthier O,Janvier P,Petit M,Bujoli B,Bohic S,Weiss P

    更新日期:2009-03-01 00:00:00

  • Osteoblast function on electrically conductive electrospun PLA/MWCNTs nanofibers.

    abstract::The electrospinning process was utilized successfully to fabricate the random oriented and aligned electrically conductive nanofibers of biodegradable poly-DL-lactide (PLA) in which multiwalled carbon nanotubes (MWCNTs) were embedded. The topographical features of the composite nanofibers were characterized by SEM. Th...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2011.01.051

    authors: Shao S,Zhou S,Li L,Li J,Luo C,Wang J,Li X,Weng J

    更新日期:2011-04-01 00:00:00

  • Biomimetic apatite formation on polyethylene photografted with vinyltrimethoxysilane and hydrolyzed.

    abstract::A photografting technique to produce functional groups of silanol able to induce apatite nucleation was attempted on polyethylene substrate for biomimetic formation of bone-mineral-like apatite layer on its surface. The polyethylene surface was subjected to vapor-phase photografting of vinyltrimethoxysilane and subseq...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(00)00437-3

    authors: Kim HM,Uenoyama M,Kokubo T,Minoda M,Miyamoto T,Nakamura T

    更新日期:2001-09-01 00:00:00

  • A paradigm for peptide vaccine delivery using viral epitopes encapsulated in degradable polymer hydrogel capsules.

    abstract::We report on the use of degradable polymer capsules as carriers for the delivery of oligopeptide antigens to professional antigen presenting cells (APCs). To achieve encapsulation, oligopeptide sequences were covalently linked to a negatively charged carrier polymer via biodegradable linkages and the resulting conjuga...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2009.05.078

    authors: Chong SF,Sexton A,De Rose R,Kent SJ,Zelikin AN,Caruso F

    更新日期:2009-10-01 00:00:00

  • Membrane of hybrid chitosan-silica xerogel for guided bone regeneration.

    abstract::Chitosan-silica xerogel hybrid membranes were fabricated using a sol-gel process and their potential applications in guided bone regeneration (GBR) were investigated in terms of their in vitro cellular activity and in vivo bone regeneration ability. TEM observation revealed that the silica xerogel was dispersed in the...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2008.10.025

    authors: Lee EJ,Shin DS,Kim HE,Kim HW,Koh YH,Jang JH

    更新日期:2009-02-01 00:00:00

  • The effect of surface coating on the bond strength of machinable ceramics.

    abstract::This study examined the nature of the surface presented by a machinable feldspathic porcelain and by a machinable glass-ceramic for bonding to conventional composite luting agents and measured the bond strengths which may be achieved with various surface treatments. There was no significant difference between the bond...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(00)00294-5

    authors: Jedynakiewicz NM,Martin N

    更新日期:2001-04-01 00:00:00

  • Directing phenotype of vascular smooth muscle cells using electrically stimulated conducting polymer.

    abstract::Vascular smooth muscle cells (VSMCs) isolated from rabbit aorta and immortalised A7r5 cells were cultured on conducting polypyrrole (PPy) substrates and were subjected to a 50muA sinusoidal electrical stimulation at 0.05, 5 and 500 Hz. These substrates were doped with hyaluronic acid and coated with collagen IV follow...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2008.07.052

    authors: Rowlands AS,Cooper-White JJ

    更新日期:2008-12-01 00:00:00

  • A biodegradable microvessel scaffold as a framework to enable vascular support of engineered tissues.

    abstract::A biodegradable microvessel scaffold comprised of distinct parenchymal and vascular compartments separated by a permeable membrane interface was conceptualized, fabricated, cellularized, and implanted. The device was designed with perfusable microfluidic channels on the order of 100 μm to mimic small blood vessels, an...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2013.09.039

    authors: Ye X,Lu L,Kolewe ME,Park H,Larson BL,Kim ES,Freed LE

    更新日期:2013-12-01 00:00:00

  • Biological evaluation of an ionomeric bone cement by osteoblast cell culture methods.

    abstract::Periosteal derived bovine osteoblast-like cells migrated in culture onto an ionomeric cement. Cell cultures were maintained for 4 weeks and used to study the in vitro behaviour of cells on the ionomeric bone cement (IC). The cells produced bone matrix proteins (osteocalcin, bone sialoprotein II) and were osteoblast-li...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/0142-9612(93)90133-m

    authors: Meyer U,Szulczewski DH,Barckhaus RH,Atkinson M,Jones DB

    更新日期:1993-10-01 00:00:00

  • Water-dispersible multifunctional hybrid nanogels for combined curcumin and photothermal therapy.

    abstract::We design a class of water-dispersible hybrid nanogels for intracellular delivery of hydrophobic curcumin. The core-shell structured hybrid nanogels were synthesized by coating the Ag/Au bimetallic nanoparticles (NPs) with a hydrophobic polystyrene (PS) gel layer as inner shell, and a subsequent thin hydrophilic nonli...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2010.08.112

    authors: Wu W,Shen J,Banerjee P,Zhou S

    更新日期:2011-01-01 00:00:00

  • Less is more: Silver-AIE core@shell nanoparticles for multimodality cancer imaging and synergistic therapy.

    abstract::Nanomaterials with integrated multiple imaging and therapeutic modalities possess great potentials in accurate cancer diagnostics and enhanced therapeutic efficacy. Traditional strategies for achieving multimodality nanoplatform through one by one combination of different modalities are challenged by the complicated s...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2020.119834

    authors: He X,Peng C,Qiang S,Xiong LH,Zhao Z,Wang Z,Kwok RTK,Lam JWY,Ma N,Tang BZ

    更新日期:2020-04-01 00:00:00

  • Water absorption, dimensional change and radial pressure in resin matrix dental restorative materials.

    abstract::The purpose of this work was to study the relationship between water absorption, dimensional change (swelling) under cavity constraint and radial stress generation in resin matrix dental restorative materials. Water absorption was determined on disc specimens whilst swelling was determined on samples of materials rest...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2003.10.088

    authors: McCabe JF,Rusby S

    更新日期:2004-08-01 00:00:00