Specific role of polysorbate 80 coating on the targeting of nanoparticles to the brain.

Abstract:

:It was reported that nanoparticles with polysorbate 80 (Tween 80, T-80) coating represented tools used for delivering drugs to brain. Nevertheless, disputations were once aroused for some complications. Aimed to have a better understanding of the specific role of T-80 coating on nanoparticles and simplify the problem, the direct observation of brain targeting combined with in vivo experiments was carried out in this work using the model nanoparticles (MNPs). The presence of a complex composed by the model loading, T-80 and nanoparticles was found in the preparation of MNPs. The result was further supported by some surface properties of MNPs. Being bound to nanoparticles that were overcoated by T-80 later, was necessary for the loading to be delivered to brain. Partial coverage was enough for T-80 coating to play a specific role in brain targeting. It seemed that brain targeting of nanoparticles was concerned with the interaction between T-80 coating and brain micro-vessel endothelial cells. Therefore, the specific role of T-80 coating on nanoparticles in brain targeting was confirmed.

journal_name

Biomaterials

journal_title

Biomaterials

authors

Sun W,Xie C,Wang H,Hu Y

doi

10.1016/j.biomaterials.2003.09.087

keywords:

subject

Has Abstract

pub_date

2004-07-01 00:00:00

pages

3065-71

issue

15

eissn

0142-9612

issn

1878-5905

pii

S014296120300855X

journal_volume

25

pub_type

杂志文章
  • Dual chemotherapy and photodynamic therapy in an HT-29 human colon cancer xenograft model using SN-38-loaded chlorin-core star block copolymer micelles.

    abstract::Chlorin-core star-shaped block copolymer (CSBC) may self-assemble to form micelles, which act as nanosized photosensitizing agents for photodynamic therapy (PDT) and further encapsulate hydrophobic drugs. This functionalized micellar delivery system is a potential dual carrier for the synergistic combination of photod...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2009.03.048

    authors: Peng CL,Lai PS,Lin FH,Yueh-Hsiu Wu S,Shieh MJ

    更新日期:2009-07-01 00:00:00

  • Biocompatibility and degradation of poly(ether-ester) microspheres: in vitro and in vivo evaluation.

    abstract::Microspheres of a hydrophobic and a hydrophilic poly(ether-ester) copolymer were evaluated for their in vitro and in vivo biocompatibility and degradation. The microspheres prior to and after sterilization were tested for in vitro cytotoxicity. The in vivo biocompatibility of the poly(ethylene glycol) terephthalate an...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(02)00220-x

    authors: van Dijkhuizen-Radersma R,Hesseling SC,Kaim PE,de Groot K,Bezemer JM

    更新日期:2002-12-01 00:00:00

  • Water absorption, dimensional change and radial pressure in resin matrix dental restorative materials.

    abstract::The purpose of this work was to study the relationship between water absorption, dimensional change (swelling) under cavity constraint and radial stress generation in resin matrix dental restorative materials. Water absorption was determined on disc specimens whilst swelling was determined on samples of materials rest...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2003.10.088

    authors: McCabe JF,Rusby S

    更新日期:2004-08-01 00:00:00

  • Skeletal repair in rabbits with calcium phosphate cements incorporated phosphorylated chitin.

    abstract::The effects of phosphorylated chitin (P-chitin) on the tissue responses to two kinds of calcium phosphate cements (CPCs) were investigated using experimental rabbits. One of them consisting of monocalcium phosphate monohydrate, calcium oxide, 1 M phosphate buffer (pH: 7.4) and different amounts of P-chitin (CPC-I or P...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(02)00205-3

    authors: Wang X,Ma J,Feng Q,Cui F

    更新日期:2002-12-01 00:00:00

  • Two-dimensional nanosheets with high curcumin loading content for multimodal imaging-guided combined chemo-photothermal therapy.

    abstract::Nowadays, two-dimensional (2D) nanomaterials with many fascinating physicochemical properties have drawn extensive attention as drug delivery platforms for cancer theranostics. Nevertheless, current existing 2D nanomaterial-based drug delivery systems normally undergo the bottlenecks of hash preparation process, low d...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2019.119470

    authors: Liu F,Lin L,Zhang Y,Sheng S,Wang Y,Xu C,Tian H,Chen X

    更新日期:2019-12-01 00:00:00

  • Cancer stem cell labeling using poly(L-lysine)-modified iron oxide nanoparticles.

    abstract::Cell labeling using magnetic nanoparticles is an increasingly used approach in noninvasive behavior tracking, in vitro separation of cancer stem cells (CSCs), and CSC-based research in cancer therapy. However, the impact of magnetic labeling on the biological properties of targeted CSCs, such as self-renewal, prolifer...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2012.01.058

    authors: Wang X,Wei F,Liu A,Wang L,Wang JC,Ren L,Liu W,Tu Q,Li L,Wang J

    更新日期:2012-05-01 00:00:00

  • Hyaluronic acid hydrogel in the treatment of osteoarthritis.

    abstract::In order to overcome the problem of rapid clearance of the polysaccharide hyaluronic acid (Hyal) in the treatment of osteoarthritis (OA), a 50% cross-linked Hyal hydrogel (Hyal 50%) was synthesised. The 50% refers to the amount of COOH groups of the polysaccharide involved in the cross-linking reaction. i.e. 50% of th...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(02)00194-1

    authors: Barbucci R,Lamponi S,Borzacchiello A,Ambrosio L,Fini M,Torricelli P,Giardino R

    更新日期:2002-12-01 00:00:00

  • Evaluation of N-succinyl-chitosan as a systemic long-circulating polymer.

    abstract::The water-soluble, low toxic and less biodegradable chitosan derivative N-succinyl-chitosan (Suc-chitosan) was investigated for body distribution and urinary excretion on a long-time scale (24-72 h after i.v. injection) using a fluorescein-labeling technique. Fluorescein isothiocyanate (FITC)-labeled Suc-chitosan (Suc...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(00)00044-2

    authors: Kato Y,Onishi H,Machida Y

    更新日期:2000-08-01 00:00:00

  • Identification of a bioactive core sequence from human laminin and its applicability to tissue engineering.

    abstract::Finding bioactive short peptides derived from proteins is a critical step to the advancement of tissue engineering and regenerative medicine, because the former maintains the functions of the latter without immunogenicity in biological systems. Here, we discovered a bioactive core nonapeptide sequence, PPFEGCIWN (resi...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2015.09.004

    authors: Yeo IS,Min SK,Kang HK,Kwon TK,Jung SY,Min BM

    更新日期:2015-12-01 00:00:00

  • Surface-mediated transfection of a pDNA vector encoding short hairpin RNA to downregulate TGF-β1 expression for the prevention of in-stent restenosis.

    abstract::In-stent restenosis is one of the most serious modes of failure of cardiovascular stent implant. Although drug-eluting stents have been proven to reduce in-stent restenosis, the nonspecific inhibitory effects of anti-proliferative drugs, such as rapamycin, result in delayed re-endothelialization and fatal late stent t...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2016.11.042

    authors: Zhang H,Ren KF,Chang H,Wang JL,Ji J

    更新日期:2017-02-01 00:00:00

  • In vivo selective imaging and inhibition of leukemia stem-like cells using the fluorescent carbocyanine derivative, DiOC5(3).

    abstract::Elimination of leukemia stem cells (LSCs) is necessary for the destruction of malignant cell populations. Owing to the very small number of LSCs in leukemia cells, xenotransplantation studies are difficult in terms of functionally and pathophysiologically replicating clinical conditions of cell culture experiments. Th...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2015.02.009

    authors: Zhang B,Shimada Y,Kuroyanagi J,Ariyoshi M,Nomoto T,Shintou T,Umemoto N,Nishimura Y,Miyazaki T,Tanaka T

    更新日期:2015-06-01 00:00:00

  • Development and applications of injectable poly(ortho esters) for pain control and periodontal treatment.

    abstract::Poly(ortho esters) with a low glass transition temperature are semi-solid materials so that therapeutic agents can be incorporated at room temperature, without the use of solvents, by a simple mixing procedure. When molecular weights are limited to < 5 kDa, such materials are directly injectable using a needle size no...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(02)00180-1

    authors: Helle J,Barr J,Ng SY,Shen HR,Schwach-Abdellaoui K,Gurny R,Vivien-Castioni N,Loup PJ,Baehni P,Mombelli A

    更新日期:2002-11-01 00:00:00

  • The threshold at which substrate nanogroove dimensions may influence fibroblast alignment and adhesion.

    abstract::The differences in morphological behaviour between fibroblasts cultured on smooth and nanogrooved substrata (groove depth: 5-350 nm, width: 20-1000 nm) have been evaluated in vitro. The aim of the study was to clarify to what extent cell guidance occurs on increasingly smaller topographies. Pattern templates were made...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2007.05.030

    authors: Loesberg WA,te Riet J,van Delft FC,Schön P,Figdor CG,Speller S,van Loon JJ,Walboomers XF,Jansen JA

    更新日期:2007-09-01 00:00:00

  • A "room-temperature" injection molding/particulate leaching approach for fabrication of biodegradable three-dimensional porous scaffolds.

    abstract::A "room-temperature" injection molding approach combined with particulate leaching (RTIM/PL) has been, for the first time, developed in this work to fabricate three-dimensional porous scaffolds composed of biodegradable polyesters for tissue engineering. In this approach, a "wet" composite of particulate/polymer/solve...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2005.05.105

    authors: Wu L,Jing D,Ding J

    更新日期:2006-01-01 00:00:00

  • Cyclic creep and fracture of dental amalgam.

    abstract::The creep strain rate and fracture of several dental amalgams has been shown to be markedly dependent on the type of loading applied. Cyclic loading typical of the in vivo situation increases creep rates and reduces times to fracture when analysis is based on a Mechanical Equation of State. The cyclic strain rate enha...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/0142-9612(83)90024-8

    authors: Williams KR

    更新日期:1983-10-01 00:00:00

  • Biological effects of cobalt-chromium nanoparticles and ions on dural fibroblasts and dural epithelial cells.

    abstract::The introduction of metal-on-metal total disc replacements motivated studies to evaluate the effects of cobalt-chromium (CoCr) nanoparticles on cells of the dura mater. Porcine fibroblasts and epithelial cells isolated from the dura mater were cultured with clinically-relevant CoCr nanoparticles and the ions, generate...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2013.01.023

    authors: Behl B,Papageorgiou I,Brown C,Hall R,Tipper JL,Fisher J,Ingham E

    更新日期:2013-05-01 00:00:00

  • Biomechanical and histomorphometric study on the bone-screw interface of bioactive ceramic-coated titanium screws.

    abstract::The purpose of this study was to compare the osseointegration of 4 different kinds of bioactive ceramic-coated screws with uncoated screws by biomechanical and histomorphometric analysis. Calcium pyrophosphate (CPP), apatite-wollastonite 1:3 glass ceramic (W3G), apatite-wollastonite 1:1 glass ceramic (WAG) and bioacti...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2004.08.033

    authors: Lee JH,Ryu HS,Lee DS,Hong KS,Chang BS,Lee CK

    更新日期:2005-06-01 00:00:00

  • Intracellular self-assembly based multi-labeling of key viral components: Envelope, capsid and nucleic acids.

    abstract::Envelope, capsid and nucleic acids are key viral components that are all involved in crucial events during virus infection. Thus simultaneous labeling of these key components is an indispensable prerequisite for monitoring comprehensive virus infection process and dissecting virus infection mechanism. Baculovirus was ...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2016.04.038

    authors: Wen L,Lin Y,Zhang ZL,Lu W,Lv C,Chen ZL,Wang HZ,Pang DW

    更新日期:2016-08-01 00:00:00

  • The performance of a hydrogel nucleus pulposus prosthesis in an ex vivo canine model.

    abstract::A nucleus pulposus prosthesis (NPP) made of the hydrogel N-vinyl-2-pyrrolidinone copolymerized with 2-(4'-iodobenzoyl)-oxo-ethyl methacrylate has recently been developed. The special features of this NPP, i.e. intrinsic radiopacity and its ability to swell in situ to fill the nucleus cavity and restore disc height, we...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2010.05.032

    authors: Bergknut N,Smolders LA,Koole LH,Voorhout G,Hagman RE,Lagerstedt AS,Saralidze K,Hazewinkel HA,van der Veen AJ,Meij BP

    更新日期:2010-09-01 00:00:00

  • Corrosion behavior of titanium nitride coated Ni-Ti shape memory surgical alloy.

    abstract::Nickel-titanium (NiTi, nitinol) shape memory alloy was nitrided using an original powder immersion reaction assisted coating (PIRAC) method in order to modify its surface properties. PIRAC nitriding method is based on annealing the samples in the atmosphere of highly reactive nitrogen supplied by decomposition of unst...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/s0142-9612(00)00368-9

    authors: Starosvetsky D,Gotman I

    更新日期:2001-07-01 00:00:00

  • Imaging γ-Glutamyltranspeptidase for tumor identification and resection guidance via enzyme-triggered fluorescent probe.

    abstract::Development of high selectivity, accurate targeted and noninvasive fluorescent probe for monitoring specific enzyme activity associated with the tumor is urgent needed for early diagnosis of cancer and clinical fluorescence interventional resection guidance treatment. Owing to the invasion of malignant tumor cells, tu...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2018.06.028

    authors: Li H,Yao Q,Xu F,Xu N,Duan R,Long S,Fan J,Du J,Wang J,Peng X

    更新日期:2018-10-01 00:00:00

  • Structure-biocompatibility relationship of dendritic polyglycerol derivatives.

    abstract::Nanocarriers possess advanced physicochemical properties that improve bioavailability, enhance cellular dynamics, and control targetability in drug delivery. In particular, dendritic polyglycerol is a promising new biocompatible scaffold for drug delivery. The present explores the structure-biocompatibility relationsh...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2010.02.001

    authors: Khandare J,Mohr A,Calderón M,Welker P,Licha K,Haag R

    更新日期:2010-05-01 00:00:00

  • Encapsulation of individual living cells with enzyme responsive polymer nanoshell.

    abstract::Cell delivery in cell therapy is typically challenged by the low cell survival rate and immunological rejection during cells injection and circulation. Encapsulation of cells with semipermeable hydrogels or membranes can improve cell viability by resisting high shear force and inhibit immune response with the physical...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2019.01.029

    authors: Yang J,Yang Y,Kawazoe N,Chen G

    更新日期:2019-03-01 00:00:00

  • Branched polyesters based on poly[vinyl-3-(dialkylamino)alkylcarbamate-co-vinyl acetate-co-vinyl alcohol]-graft-poly(d,l-lactide-co-glycolide): effects of polymer structure on cytotoxicity.

    abstract::Branched polyesters of the general structure poly[vinyl-3-(dialkylamino)alkylcarbamate-co-vinyl acetate-co-vinyl alcohol]-graft-poly(d,l-lactide-co-glycolide) have shown potential for nano- and micro-scale drug delivery systems. For further optimization of this polymer class their cytotoxicity needs to be characterize...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2006.12.002

    authors: Unger F,Wittmar M,Kissel T

    更新日期:2007-03-01 00:00:00

  • Tissue reaction to Dacron velour and titanium fibre mesh used for anchorage of percutaneous devices.

    abstract::Dacron velour is often used to anchor a percutaneous device, like the catheter used in peritoneal dialysis. However, exit-site infections complicate this method of dialysis and are supposed to be related to the design of the catheter. In animal experiments, a percutaneous device provided with a titanium fibre mesh to ...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/0142-9612(96)84946-5

    authors: Paquay YC,de Ruijter JE,van der Waerden JP,Jansen JA

    更新日期:1996-06-01 00:00:00

  • Structural characterization of room-temperature synthesized nano-sized beta-tricalcium phosphate.

    abstract::A simple route for synthesizing nano-sized beta-tricalcium phosphate (beta-TCP) at room temperature has been developed in methanol solvent. The phase evolution from CaHPO4, intermediate amorphous calcium phosphate (ACP) phases (including ACP1 and ACP2 with different structures) to final beta-TCP with increasing aging ...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2003.10.046

    authors: Bow JS,Liou SC,Chen SY

    更新日期:2004-07-01 00:00:00

  • Modulating the mechanical properties of self-assembled peptide hydrogels via native chemical ligation.

    abstract::Hydrogels produced from self-assembling peptides and peptide derivatives are being investigated as synthetic extracellular matrices for defined cell culture substrates and scaffolds for regenerative medicine. In many cases, however, they are less stiff than the tissues and extracellular matrices they are intended to m...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2008.01.008

    authors: Jung JP,Jones JL,Cronier SA,Collier JH

    更新日期:2008-05-01 00:00:00

  • Collagen implants remain supple not allowing fibroblast ingrowth.

    abstract::Dense, reconstituted collagen membranes, using an optimized cross-linking protocol, were implanted subcutaneously into rats. After implantation, only a mild inflammatory response in the surrounding tissues was observed. The morphology of the fibroblasts around the membranes was seen to go through characteristic stages...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/0142-9612(95)98905-t

    authors: Boon ME,Ruijgrok JM,Vardaxis MJ

    更新日期:1995-09-01 00:00:00

  • Sensitivity to implant materials in patients with total knee arthroplasties.

    abstract::Materials used for total knee arthroplasty (TKA), may elicit an immune response whose role in the outcome of the arthroplasty is still unclear. The aim of this study was to evaluate the frequency of sensitization in patients who had undergone TKA, and the clinical impact of this event on the outcome of the implant. Ni...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/j.biomaterials.2007.11.038

    authors: Granchi D,Cenni E,Tigani D,Trisolino G,Baldini N,Giunti A

    更新日期:2008-04-01 00:00:00

  • Creep in a palladium-enriched high-copper amalgam.

    abstract::Palladium additions to a dispersed phase high-copper amalgam have been shown recently to suppress markedly the eta' (Cu6Sn5) concentration and decrease creep. A detailed study of the dental and 24 h creep for Pd containing high-copper amalgams and six commercial controls as a function of applied temperature and stress...

    journal_title:Biomaterials

    pub_type: 杂志文章

    doi:10.1016/0142-9612(88)90086-5

    authors: Greener EH,Chung KH,Lin JH

    更新日期:1988-05-01 00:00:00